參考文獻 |
[1] C. A. Sciammarella, “High-accuracy contouring using projection moiré”, Optical Engineering, Vol. 44(9), September, 2005.
[2] S. Fang, “Analysis and Compensation Method for Installation Error in Measuring Gear Tooth Flank with Laser Interferometry”, Optical Engineering, Vol. 53(8), August, 2014.
[3] H. J. Pahk, “Vision based Precision Inspection System for Profile and Performance of Small and Micro Gears Using the Intelligent Image Processing Techniques and Virtual Master Gears”, Proceedings of SPIE, Vol. 4222, 2000.
[4] J. Peters, “Helical Gear Measurement Using Structured Light”, Proceedings of the XVI IMEKO World Congress, Wien, pp.227–230, 2000.
[5] 張軒慈,「應用繞射光學元件之齒輪量測系統開發」,國立中央大學光機電工程研究所碩士論文,民國105年。
[6] 日本Nikon機台HN-C3030之介紹:
http://www.nikon.com/products/industrial-metrology/lineup/3d_metrology/3d-coordinate-metrology/hnc3030/
[7] W. Y. Chang, “Reconstruction of surface profile by using heterodyne moiré method”, Opt. Com. 285(24), pp.5337–5340, 2012.
[8] C. A. Sciammarella, “High Precision Contouring with Moiré and Related Methods: A Review ”, Journal for Experimental Mechanics, 47, Suppl. 2:43-64, 2011.
[9] M. S. Jeong “Color grating projection moiré with time-integral fringe capturing for high-speed 3-D imaging”, Optical Engineering, Vol. 41(8), pp.1912–1917, 2002.
[10] J. Mu, “Error analysis of phase shifting by varying the incident angle of parallel beams in shadow moiré”, Optic-International Journal for Light and Electron Optics, Vol. 124(24), pp.6769–6771, 2013.
[11] W. S. Boyle and G. E. Smith, “Charge-Coupled Devices A new Approach to MIS Device Structures”, IEEE spectrum, No.7, pp.18-27, July, 1971.
[12] Panasonic CCD感測元件介紹:
http://av.jpn.support.panasonic.com/support/dsc/knowhow/knowhow27.html
[13] 陳煜彬,「應用機器視覺之新式晶圓定位方法」,國立中央大學光機電工程研究所碩士論文,民國100年。
[14] 快門速度、ISO感光度及光圈三者關係之曝光鐵三角介紹 :
http://www.learntimelapse.com/time-lapse-exposure-avoiding-flicker-and-dragging-shutter/
[15] H. Talasaki, “Moiré topography”, Applied Optics, Vol. 12(4), pp.845-850, 1973.
[16] K. Creath and J. C. Wyant, “Moiré and Fringe Projection Techniques”, Optical Shop Testing, Second Edition, pp.653-685, 1992.
[17] 陳旭東,「基於Talbot效應之疊紋式角度量測系統開發」,國立中央大學光機電工程研究所碩士論文,民國103年。
[18] P. Hariharan, B.F. Oreb and T. Eiju, “Digital phase-shifting interferometry a simple error-compensating phase calculation algorithm”, Applied Optics, Vol. 26(13), pp.2504-2506, 1987.
[19] R. Cusack, J. M. Huntley and H. T. Goldgrein, “Improved noise immune phase unwrapping algorithm”, Applied Optics, Vol. 34, pp.781-789, 1995.
[20] K. Itoh, “Analysis of the phase unwrapping algorithm”, Applied Optics, Vol. 21(14), pp.3898-3901, 1983.
[21] W. W. Macy, “Two-dimensional fringe-pattern analysis”, Applied Optics, Vol. 22(23), pp.3898-3901, 1983.
[22] R. M. Goldstein, H. A. Zebker and C. L. Werner, “Satellite radar interferometry: Two-dimensional phase unwrapping”, Radio Science, Vol. 23(4), pp.713-720, 1988.
[23] E. P. Goodwin and J. C. Wyant, “Field Guide to Interferometric Optical Testing”, Proceedings of SPIE, 2006.
[24] 李元裕,「投射疊紋掃描量測技術研究」,私立中原大學機械工程研究所碩士論文,民國90年。
[25] Alasdair and McAndrew著,徐曉珮譯,數位影像處理,新加坡商聖智學習亞洲私人有限公司台灣分公司,台北市,2009。
[26] Gonzalez and Woods 著,繆紹綱譯,數位影像處理,三版,台灣培生教育出版股份有限公司,台北市,2009。
[27] 李朱育等編著,光機電產業設備系統設計,五南圖書出版股份有限公司,台北市,2013。
[28] N. Otsu, “A Threshold Selection Method from Gray-Level”, Histogram, IEEE Transaction on Systems, Man, and Cybernetics, Vol.9, No.1, pp.62-66, January, 1979.
[29] 美商國家儀器;機器視覺Guaging應用中的邊緣偵測(Edge Detection)功能。2010年6月7日。
http://www.ni.com/white-paper/4536/zht/
[30] 马艳, “几种边缘检测算子的比较”, Industry and Mine Automation, No.1, pp.54-55, February, 2004.
[31] J. Canny, “Finding Edges and Lines in Images”, Massachusetts Institute of Technology, Tech.Rep.No.720, June, 1983.
[32] D. C. Brown, “Decentering Distortion of Lens”, Photometric Engineering, pp.444-462, 1966.
[33] G. P. Stein, “Lens Distortion Calibration Using Point Correspondences“, IEEE Computer Society Conference on, A.I. Memo No1595, November, 1996.
[34] J. Wang, F. Shi, J. Zhang and Y. Liu, “A New Calibration Model of Camera Lens Distortion”, Pattern Recognition41, pp.607-615, 2008.
[35] G. P. Stein, “Lens Distortion Calibration Using Point Correspondences”, Proceedings of the 1997 Conference on Computer Vision and Pattern Recognition(CVPR’97), pp.602-608, June, 1997.
[36] J. Weng, “Camera Calibration with Distortion Models and Accuracy Evaluation”, IEEE Transactions on pattern analysis and machine intelligence, Vol.14, No.10, pp.965-980, October, 1992.
[37] DIN 3961/ 3962, Tolerances For Cylindrical Gear Teeth-Bases / Tolerances For Cylindrical Gear Teeth-Tolerances For Deviations Of Individual Parameters, 1978.
[38] ANSI/AGMA 2015-1-A01, Accuracy Classification System Tangential Measurements For Cylindrical Gears, 2002.
[39] 蔡佳宏,「五軸CNC成形砂輪磨齒機線上掃描式量測NC路徑規劃與齒輪精度評估之研究」,國立台灣科技大學機械工程學系碩士論文,民國100年。
[40] 石照耀,林虎“齿轮误差多自由度理论”, Journal of Mechanical Engineering, Vol.50, No1, pp.55-60, January, 2014.
[41] F. L. Litvin and A. F. Aznar, “Gear Geometry and Applied Theory”, Cambridge: Cambridge University Press, pp.105-120, 2004.
[42] 林虎, “基于正交距离回归齿面的齿轮誤差評定”, Optics and Precision Engineering, Vol.23, No11, pp.3192-3199, November, 2015.
[43] 小原治敏著,齒輪入門,小原歯車工業株式會社,昭和61年。
[44] S. J. Ahn, W. Rauh and H. S. Cho, “Orthogonal Distance Fitting of Implicit Curves and Surfaces”, IEEE Transactions on Pattern Analysis and Machine Intelligence, Vol.24, No5, pp.620-638, May, 2002.
[45] W. Lotze and F. Haertig, “3D Gear Measurement by CMM”, WIT Transactions on Engineering Sciences, Vol.34, pp.333-344, 2001. |