參考文獻 |
[1] A. Kojima, K. Teshima, Y. Shirai, and T. Miyasaka,
“Organometal halide perovskites as visible-light sensitizers for photovoltaic cells,” Journal of the American Chemical Society, vol. 131, no. 17, pp. 6050-6051, 2009.
[2] W. S. Yang, B.-W. Park, E. H. Jung, N. J. Jeon, Y. C. Kim, D. U. Lee, S. S. Shin, J. Seo, E. K. Kim, and J. H. Noh, “Iodide management in formamidinium-lead-halide–based perovskite layers for efficient solar cells,” Science, vol. 356, no. 6345, pp. 1376-1379, 2017.
[3] N. R. E. L. (NREL). "Best Research-Cell Efficiencies," https://www.nrel.gov/pv/.
[4] T. Baikie, Y. Fang, J. M. Kadro, M. Schreyer, F. Wei, S. G. Mhaisalkar, M. Graetzel, and T. J. White, “Synthesis and crystal chemistry of the hybrid perovskite (CH 3 NH 3) PbI 3 for solid-state sensitised solar cell applications,” Journal of Materials Chemistry A, vol. 1, no. 18, pp. 5628-5641, 2013.
[5] S. D. Stranks, and H. J. Snaith, “Metal-halide perovskites for photovoltaic and light-emitting devices,” Nature nanotechnology, vol. 10, no. 5, pp. 391-402, 2015.
[6] Wikipedia. "The solar radiation spectrum," https://en.wikipedia.org/wiki/Solar_irradiance.
[7] J. H. Im, C. R. Lee, J. W. Lee, S. W. Park, and N. G. Park, “6.5% efficient perovskite quantum-dot-sensitized solar cell,” Nanoscale, vol. 3, no. 10, pp. 4088-93, Oct 5, 2011.
[8] H. S. Kim, C. R. Lee, J. H. Im, K. B. Lee, T. Moehl, A. Marchioro, S. J. Moon, R. Humphry-Baker, J. H. Yum, J. E. Moser, M. Gratzel, and N. G. Park, “Lead iodide perovskite sensitized all-solid-state submicron thin film mesoscopic solar cell with efficiency exceeding 9%,” Sci Rep, vol. 2, pp. 591, 2012.
[9] J. Burschka, N. Pellet, S.-J. Moon, R. Humphry-Baker, P. Gao, M. K. Nazeeruddin, and M. Grätzel, “Sequential deposition as a route to high-performance perovskite-sensitized solar cells,” Nature, vol. 499, no. 7458, pp. 316-319, 2013.
[10] D. Bi, C. Yi, J. Luo, J.-D. Décoppet, F. Zhang, Shaik M. Zakeeruddin, X. Li, A. Hagfeldt, and M. Grätzel, “Polymer-templated nucleation and crystal growth of perovskite films for solar cells with efficiency greater than 21%,” Nature Energy, vol. 1, no. 10, pp. 16142, 2016.
[11] M. Liu, M. B. Johnston, and H. J. Snaith, “Efficient planar heterojunction perovskite solar cells by vapour deposition,” Nature, vol. 501, no. 7467, pp. 395-8, Sep 19, 2013.
[12] J. H. Im, I. H. Jang, N. Pellet, M. Gratzel, and N. G. Park, “Growth of CH3NH3PbI3 cuboids with controlled size for high-efficiency perovskite solar cells,” Nat Nanotechnol, vol. 9, no. 11, pp. 927-32, Nov, 2014.
[13] Z. Song, S. C. Watthage, A. B. Phillips, and M. J. Heben, “Pathways toward high-performance perovskite solar cells: review of recent advances in organo-metal halide perovskites for photovoltaic applications,” Journal of Photonics for Energy, vol. 6, no. 2, pp. 022001, 2016.
[14] A. Dualeh, N. Tétreault, T. Moehl, P. Gao, M. K. Nazeeruddin, and M. Grätzel, “Effect of Annealing Temperature on Film Morphology of Organic-Inorganic Hybrid Pervoskite Solid-State Solar Cells,” Advanced Functional Materials, vol. 24, no. 21, pp. 3250-3258, 2014.
[15] Z. Xiao, Q. Dong, C. Bi, Y. Shao, Y. Yuan, and J. Huang, “Solvent annealing of perovskite‐induced crystal growth for photovoltaic‐device efficiency enhancement,” Advanced Materials, vol. 26, no. 37, pp. 6503-6509, 2014.
[16] J. Liu, C. Gao, X. He, Q. Ye, L. Ouyang, D. Zhuang, C. Liao, J. Mei, and W. Lau, “Improved Crystallization of Perovskite Films by Optimized Solvent Annealing for High Efficiency Solar Cell,” ACS Appl Mater Interfaces, vol. 7, no. 43, pp. 24008-15, Nov 4, 2015.
[17] L. Zhang, S. Tian, Z. Yu, F. Zhang, F. Niu, X. Li, J. Song, P. Zeng, and J. Lian, “Rational Solvent Annealing for Perovskite Film Formation in Air Condition (July 2017),” IEEE Journal of Photovoltaics, vol. 7, no. 5, pp. 1338-1341, 2017.
[18] F. X. Xie, D. Zhang, H. Su, X. Ren, K. S. Wong, M. Grätzel, and W. C. Choy, “Vacuum-assisted thermal annealing of CH3NH3PbI3 for highly stable and efficient perovskite solar cells,” ACS nano, vol. 9, no. 1, pp. 639-646, 2015.
[19] Q. Y. Xu, D. X. Yuan, H. R. Mu, F. Igbari, Q. Bao, and L. S. Liao, “Efficiency Enhancement of Perovskite Solar Cells by Pumping Away the Solvent of Precursor Film Before Annealing,” Nanoscale Res Lett, vol. 11, no. 1, pp. 248, Dec, 2016.
[20] X. Li, D. Bi, C. Yi, J.-D. Décoppet, J. Luo, S. M. Zakeeruddin, A. Hagfeldt, and M. Grätzel, “A vacuum flash–assisted solution process for high-efficiency large-area perovskite solar cells,” Science, vol. 353, no. 6294, pp. 58-62, 2016.
[21] R. Kang, J.-E. Kim, J.-S. Yeo, S. Lee, Y.-J. Jeon, and D.-Y. Kim, “Optimized Organometal Halide Perovskite Planar Hybrid Solar Cells via Control of Solvent Evaporation Rate,” The Journal of Physical Chemistry C, vol. 118, no. 46, pp. 26513-26520, 2014.
[22] L. Huang, Z. Hu, J. Xu, K. Zhang, J. Zhang, and Y. Zhu, “Multi-step slow annealing perovskite films for high performance planar perovskite solar cells,” Solar Energy Materials and Solar Cells, vol. 141, pp. 377-382, 2015.
[23] N. J. Jeon, J. H. Noh, Y. C. Kim, W. S. Yang, S. Ryu, and S. I. Seok, “Solvent engineering for high-performance inorganic–organic hybrid perovskite solar cells,” Nature Materials, vol. 13, no. 9, pp. 897-903, 2014.
[24] M. Xiao, F. Huang, W. Huang, Y. Dkhissi, Y. Zhu, J. Etheridge, A. Gray-Weale, U. Bach, Y. B. Cheng, and L. Spiccia, “A fast deposition-crystallization procedure for highly efficient lead iodide perovskite thin-film solar cells,” Angew Chem Int Ed Engl, vol. 53, no. 37, pp. 9898-903, Sep 8, 2014.
[25] N. Ahn, D. Y. Son, I. H. Jang, S. M. Kang, M. Choi, and N. G. Park, “Highly Reproducible Perovskite Solar Cells with Average Efficiency of 18.3% and Best Efficiency of 19.7% Fabricated via Lewis Base Adduct of Lead(II) Iodide,” J Am Chem Soc, vol. 137, no. 27, pp. 8696-9, Jul 15, 2015.
[26] W. Zhu, L. Kang, T. Yu, B. Lv, Y. Wang, X. Chen, X. Wang, Y. Zhou, and Z. Zou, “Facile Face-Down Annealing Triggered Remarkable Texture Development in CH3NH3PbI3 Films for High-Performance Perovskite Solar Cells,” ACS Appl Mater Interfaces, vol. 9, no. 7, pp. 6104-6113, Feb 22, 2017.
[27] Y. Li, J. Wang, Y. Yuan, X. Dong, and P. Wang, “Anti-solvent dependent device performance in CH3NH3PbI3 solar cells: the role of intermediate phase content in the as-prepared thin films,” Sustainable Energy & Fuels, vol. 1, no. 5, pp. 1041-1048, 2017.
[28] Y. Gao, L. Yang, F. Wang, Y. Sui, Y. Sun, M. Wei, J. Cao, and H. Liu, “Anti-solvent surface engineering via diethyl ether to enhance the photovoltaic conversion efficiency of perovskite solar cells to 18.76%,” Superlattices and Microstructures, vol. 113, pp. 761-768, 2018.
[29] T. Bu, L. Wu, X. Liu, X. Yang, P. Zhou, X. Yu, T. Qin, J. Shi, S. Wang, S. Li, Z. Ku, Y. Peng, F. Huang, Q. Meng, Y.-B. Cheng, and J. Zhong, “Synergic Interface Optimization with Green Solvent Engineering in Mixed Perovskite Solar Cells,” Advanced Energy Materials, vol. 7, no. 20, pp. 1700576, 2017.
[30] M. Yin, F. Xie, H. Chen, X. Yang, F. Ye, E. Bi, Y. Wu, M. Cai, and L. Han, “Annealing-free perovskite films by instant crystallization for efficient solar cells,” Journal of Materials Chemistry A, vol. 4, no. 22, pp. 8548-8553, 2016.
[31] C. Fei, B. Li, R. Zhang, H. Fu, J. Tian, and G. Cao, “Highly Efficient and Stable Perovskite Solar Cells Based on Monolithically Grained CH3NH3PbI3 Film,” Advanced Energy Materials, vol. 7, no. 9, pp. 1602017, 2017.
[32] C. Marangoni, “On the expansion of a drop of liquid floating on the surface of another liquid,” Tipographia dei fratelli Fusi, Pavia, 1865.
[33] B.Costa. "Tears of wine and the Marangoni effect," https://www.comsol.com/blogs/tears-of-wine-and-the-marangoni-effect/.
[34] C. Girotto, D. Moia, B. P. Rand, and P. Heremans, “High-Performance Organic Solar Cells with Spray-Coated Hole-Transport and Active Layers,” Advanced Functional Materials, vol. 21, no. 1, pp. 64-72, 2011.
[35] H. Ishihara, S. Sarang, Y.-C. Chen, O. Lin, P. Phummirat, L. Thung, J. Hernandez, S. Ghosh, and V. Tung, “Nature inspiring processing route toward high throughput production of perovskite photovoltaics,” J. Mater. Chem. A, vol. 4, no. 18, pp. 6989-6997, 2016.
[36] F. Ye, F. Xie, M. Yin, J. He, Y. Wang, W. Tang, H. Chen, X. Yang, and L. Han, “Effect of thermal-convection-induced defects on the performance of perovskite solar cells,” Applied Physics Express, vol. 10, no. 7, pp. 075502, 2017.
[37] A. A. Sutanto, S. Lan, C.-F. Cheng, S. B. Mane, H.-P. Wu, M. Leonardus, M.-Y. Xie, S.-C. Yeh, C.-W. Tseng, C.-T. Chen, E. W.-G. Diau, and C.-H. Hung, “Solvent-assisted crystallization via a delayed-annealing approach for highly efficient hybrid mesoscopic/planar perovskite solar cells,” Solar Energy Materials and Solar Cells, vol. 172, pp. 270-276, 2017.
[38] 黃柏樵, 「具奈米結構之氟參雜氧化錫玻璃基板應用於鈣鈦礦太陽能電池之研究」,國立中央大學,碩士論文, 民國106年。
[39] 張哲嘉, 「利用鈣/鈦複合物作為鈣鈦礦太陽能電池介孔層之研究」,國立中央大學,碩士論文, 民國106年。
[40] W. Zhou, P. Zhou, X. Lei, Z. Fang, M. Zhang, Q. Liu, T. Chen, H. Zeng, L. Ding, J. Zhu, S. Dai, and S. Yang, “Phase Engineering of Perovskite Materials for High-Efficiency Solar Cells: Rapid Conversion of CH3NH3PbI3 to Phase-Pure CH3NH3PbCl3 via Hydrochloric Acid Vapor Annealing Post-Treatment,” ACS Appl Mater Interfaces, vol. 10, no. 2, pp. 1897-1908, Jan 17, 2018.
[41] B. Yang, O. Dyck, J. Poplawsky, J. Keum, A. Puretzky, S. Das, I. Ivanov, C. Rouleau, G. Duscher, D. Geohegan, and K. Xiao, “Perovskite Solar Cells with Near 100% Internal Quantum Efficiency Based on Large Single Crystalline Grains and Vertical Bulk Heterojunctions,” J Am Chem Soc, vol. 137, no. 29, pp. 9210-3, Jul 29, 2015.
[42] E. Nouri, M. R. Mohammadi, Z. X. Xu, V. Dracopoulos, and P. Lianos, “Improvement of the photovoltaic parameters of perovskite solar cells using a reduced-graphene-oxide-modified titania layer and soluble copper phthalocyanine as a hole transporter,” Phys Chem Chem Phys, vol. 20, no. 4, pp. 2388-2395, Jan 24, 2018.
[43] H. W. Chen, T. Y. Huang, T. H. Chang, Y. Sanehira, C. W. Kung, C. W. Chu, M. Ikegami, T. Miyasaka, and K. C. Ho, “Efficiency Enhancement of Hybrid Perovskite Solar Cells with MEH-PPV Hole-Transporting Layers,” Sci Rep, vol. 6, pp. 34319, Oct 4, 2016.
[44] W. Ke, G. Fang, J. Wang, P. Qin, H. Tao, H. Lei, Q. Liu, X. Dai, and X. Zhao, “Perovskite solar cell with an efficient TiO(2) compact film,” ACS Appl Mater Interfaces, vol. 6, no. 18, pp. 15959-65, Sep 24, 2014.
[45] W. Nie, H. Tsai, R. Asadpour, J.-C. Blancon, A. J. Neukirch, G. Gupta, J. J. Crochet, M. Chhowalla, S. Tretiak, and M. A. Alam, “High-efficiency solution-processed perovskite solar cells with millimeter-scale grains,” Science, vol. 347, no. 6221, pp. 522-525, 2015.
[46] C. Wang, C. Xiao, Y. Yu, D. Zhao, R. A. Awni, C. R. Grice, K. Ghimire, I. Constantinou, W. Liao, and A. J. Cimaroli, “Understanding and eliminating hysteresis for highly efficient planar perovskite solar cells,” Advanced Energy Materials, vol. 7, no. 17, 2017.
[47] B. Chen, M. Yang, S. Priya, and K. Zhu, “Origin of J-V Hysteresis in Perovskite Solar Cells,” J Phys Chem Lett, vol. 7, no. 5, pp. 905-17, Mar 3, 2016.
[48] R. S. Sanchez, V. Gonzalez-Pedro, J. W. Lee, N. G. Park, Y. S. Kang, I. Mora-Sero, and J. Bisquert, “Slow Dynamic Processes in Lead Halide Perovskite Solar Cells. Characteristic Times and Hysteresis,” J Phys Chem Lett, vol. 5, no. 13, pp. 2357-63, Jul 3, 2014.
[49] U. W. Paetzold, W. Qiu, F. Finger, J. Poortmans, and D. Cheyns, “Nanophotonic front electrodes for perovskite solar cells,” Applied Physics Letters, vol. 106, no. 17, pp. 173101, 2015. |