參考文獻 |
[1] H N Abramson, “Flexural Waves in Elastic Beams of Circular Cross Section,” The Journal of the Acoustical Society of America, Vol. 29, No. 1, pp. 42-46, 1957.
[2] B A Auld, “Acoustic Fields, and Waves in Solids,” Volume II, 2nd edition, Malabar, FL: Krieger Publishing Company, pp. 63-114, 1990.
[3] C N Baker, G Parikh, J L Briaud, E E Drumright, and F Mensah, “Drilled Shafts for Bridge Foundations,” Report No. FHWA-RD-92-004, Federal Highway Administration, McLean, VA., 1993.
[4] S C Baxter, O Islam, and S L Gassman, “Impulse Response Evaluation of Drilled Columns with Pile Caps: Modeling and Experiment”, Canadian Journal of Civil Engineering, Vol. 31, No. 2, pp. 169-177, 2004.
[5] J L Briaud, M Ballouz, and G Nasr, “Defect and Length Predictions by NDT Methods for Nine Bored Piles,” Deep Foundations 2002: An International Perspective on Theory, Design, Construction, and Performance, pp. 173-192, 2002.
[6] A G Davis, “Nondestructive Evaluation of Existing Deep Foundations,” Journal of Performance and Constructed Facilities, ASCE, Vol. 9, No. 1, pp. 57-74, 2007.
[7] A G Davis, and C S Dunn, “From Theory to Field Experience with Non-Destructive Vibration Testing of Piles,” Proceedings of the Institution of Civil Engineers, Part 2: Research and Theory, Vol. 57, pp. 571-593, 1974.
[8] A G Davis, and B H Hertlein, “Development of Nondestructive Small-Strain Methods for Testing Deep Foundations: A Review Integrity Testing of Foundation,” Transportation Research Record, Vol. 1331, pp. 15-20, 1991.
[9] R J Finno, and S L Gassman, “Impulse Response Evaluation of Drilled Shafts,” Journal of Geotechnical and Geoenvironmental Engineering, ASCE, Vol. 124, No. 10, pp. 965-975, 1998.
[10] R J Finno, S L Gassman, and P W Osborn, “Non-Destructive Evaluation of a Deep Foundation Test Section at the Northwestern University National Geotechnical Experimentation Site,” Report submitted to Federal Highway Administration, Northwestern University, Evanston, IL, 1997.
[11] S L Gassman, and R J Finno, “Impulse Response Evaluation of Foundations Using Multiple Geophones,” Journal of Performance of Constructed Facilities, ASCE, Vol. 13, No. 2, pp. 82-89, 1999.
[12] S L Gassman, and R J Finno, “Cutoff Frequencies for Impulse Response Tests of Existing Foundations,” Journal of Performance of Constructed Facilities, ASCE, Vol. 14, No. 1, pp. 11-21, 2000.
[13] K F Graff, Wave Motion in Elastic Solids, New York, NY: Dover Publications, Inc, 1975.
[14] Geo-Institute Deep Foundations Committee, “Nondestructive Evaluation of Drilled Shafts,” Journal of Geotechnical and Geoenvironmental Engineering, Vol. 126, No. 1, pp. 92-95, 2000.
[15] A A Hanifah, “A Theoretical Evaluation of Guided Waves in Deep Foundations,” Ph.D. Dissertation, Northwestern University, Evanston, IL, 1999.
[16] T M Hearne, K H Stokoe, and L C Reese, “Drilled Shaft Integrity by Wave Method,” Journal of the Geotechnical Engineering Division, ASCE, Vol. 107, No. GT10, pp. 1327-1344, 1981.
[17] B H Hertlein, and A G Davis, Nondestructive Testing of Deep Foundations, John Wiley & Sons Ltd., Chichester, U.K, 2006.
[18] N-E Huang, Z Shen, S-R Long, M-C Wu., Q. Shin., H-H Zheng, N.-C Yen, C-C. Tung, and H-H Liu, “The Empirical Mode Decomposition and the Hilbert Spectrum for Nonlinear and Non-Stationary Time Series Analysis,” Proceedings of the Royal Society of London: A Mathematical Physical and Engineering Sciences, Vol. 454, pp. 903-995, 1998.
[19] Y-H Huang. and, S-H Ni., “Experimental Study for the Evaluation of Stress Wave Approaches on a Group Pile Foundation,” NDT & E International, Vol. 47, pp. 134-143, 2012.
[20] G E Hudson, “Dispersion of Elastic Waves in Solid Circular Cylinders,” Physics Review, Vol. 63, pp. 46-51, 1943.
[21] H Kolsky, Stress Waves in Solids, Dover Publications, Inc. New York, U.S.A, 1963.
[22] S-T Liao, and J M Roesset, “Dynamic Response of Intact Piles to Impulse Loads,” International Journal for Numerical and Analytical Methods in Geomechanics, Vol. 21, Vol.4, pp. 255-275, 1997.
[23] K-F Lo, S-H Ni, and Y-H Huang, “Non-Destructive Test for Pile Beneath Bridge in the Time, Frequency, and Time-Frequency Domains Using Transient Loading,” Nonlinear Dynamics, Vol. 62, No. 1, pp. 349-360, 2010.
[24] T.R. Meeker, and A.H.Meitzler, “Guided Wave Propagation in Elongated Cylinders and Plates,” in Physical Acoustics, Volume 1, Part A, edited by Mason, W.P., New York, NY: Academic Press Inc., pp. 111-167, 1964.
[25] L D Olson, F Jalinoos, and M F Aouad, “Determination of Unknown Subsurface Bridge Foundations”, NCHRP Project No. E21-5, Olson Engineering, Boulder, Colorado, U.S.A., 1998.
[26] Y-H Pao, and R D Mindlin, “Dispersion of Flexural Waves in an Elastic, Circular Cylinder,” Journal of Applied Mechanics, Vol. 27, Series E, No. 3, pp. 513-520, 1960.
[27] Y-H Pao, “The Dispersion of Flexural Waves in an Elastic, Circular Cylinder- Part 2,” Journal of Applied Mechanics, Vol. 29, Series E, No. 1, pp. 61-64, 1962.
[28] F Rausche , G Likins, and M Hussein, “Pile Integrity by Low and High Strain Impacts,” Proceeding of the 3rd International Conference on Application of Stress-Wave Theory to Piles, Ottawa, Canada, pp. 44-55, 1988.
[29] J R Rix, L J Jacobs, and C D Reichert, “Evaluation of Nondestructive Test Methods for Length, Diameter, and Stiffness Measurements on Drilled Shafts,” Transportation Research Record, Vol. 1415, pp. 69-77, 1993.
[30] D Royer,and E Dieulesaint, Elastic Waves in Solids I: Free and Guided Propagation, Berlin, Germany: Springer-Verlag, pp. 16-23 and 261-331, 2000.
[31] S Sajid, and L Chouinard, “Impulse Response Test for Condition Assessment of Concrete: A Review,” Construction and Building Materials, Vol. 211, pp. 317-328, 2019.
[32] C-Y Wang, H Wang, H-J Wu, T.V. Nguyen, “A Verification Study on Bridge Pile Bent Foundations with Non-Destructive Depth Inspection Technique,” CECI Research Project No. 05929, CECI, Taipei, Taiwan. (in Chinese), 2018.
[33] C-P Yu, and S-T Liao, “Theoretical. Basis and Numerical Simulation of Impedance Log Test for Evaluating the Integrity of Columns and Piles,” Canadian Geotechnical Journal, Vol. 43, No. 12, pp. 1238-1248, 2006.
[34] J J Zemanek, “An Experimental and Theoretical Investigation of Elastic Wave Propagation in a Cylinder,” Ph.D. Dissertation, University California at Los Angles, Los Angles, CA, 1962.
[35] Chinese Institute of Civil and Hydraulic Engineering (CICHE), “Bridge Inspection Method and Application,” Taipei, Taiwan, Scientific and Technical Publishing Co., Ltd., pp. 5-27~5-32, 2010.
[36] H Wang and C-H Hu, “Identification on Unknown Bridge Foundations Using Geophysical Inspecting Methods”, The e-Journal of Nondestructive Testing, Vol. 20, No. 11, pp. 905-912, 2015.
[37] H Wang, C-H. Hu, C-H. Hsieh, and S-H. Hsieh, “Depth Inspection on Scoured Bridges without Foundation Information”, Proceedings of the 29th Symposium on the Application of Geophysics to Engineering and Environmental Problems (SAGEEP 2016), Denver, Colorado, U.S.A., Paper ID No.: 38 (total 6 pages), 2016.
[38] J Lynch, “Experimental Verification of Flexural Guided Waves in Concrete Cylindrical Piles”, Ph.D. Dissertation, Northwestern University, Evanston, Illinois, U.S.A., 2007.
[39] H Wang, “Theoretical Evaluation of Embedded Plate-Like and Solid Cylindrical Concrete Structures with Guided Waves”, Ph.D. Dissertation, Northwestern University, Evanston, Illinois, U.S.A, 2004.
[40] H Wang, T-P. Chang, and J-J. Wang, “Response Analysis of Concrete Piles Subjected to Lateral Impact”, Journal of Marine Science and Technology, Vol. 18, No. 6, pp. 848-859, 2010.
[41] R J Finno, H Wang, and J J Lynch, “Flexural waves in nondestructive evaluation of drilled shafts,” GEO3: Industry in Action― GEO Construction Quality Assurance/ Quality Control (QA/QC) Conference Proceedings, ADSC, Dallas/Fort Worth, Texas, U.S.A., 341-352, 2005.
[42] G J Rix, L J Jacobs, P B Rhodes, and R Q Raparelli, “Nondestructive Assessment of Pile Tip Elevations Using Flexural Waves,” Georgia Department of Transportation Project No. 9406, Atlanta, Georgia, U.S.A, 1995.
[43] C-P Yu, and J M Roesset, “Determination of Pile Lengths Using Flexural Waves,” NCHRP Project E21-5, report for Olson Engineering, Inc., Golden, Colorado, U.S.A, 1995.
[44] CECI (China Engineering Consultants, Inc.), “Detailed design chart for the piers supporting a pretensioned concrete bridge in northeastern,” Taipei, Taiwan: CECI, 2009.
[45] CICHE (Chinese Institute of Civil and Hydraulic Engineering), “Bridge inspection method and application,” Taipei, Taiwan: Scientific and Technical Publishing, 2010. [In Chinese]
[46] W Daily, A. Ramirez, A. Binley, and D. LaBrecque, “Electrical resistance tomography: Practice and theory.” In Near-Surface Geophysics: Investigations in Geophysics No. 13, edited by D. W. Butler, pp. 525-550, Tulsa, OK: Society of Exploration Geophysicists, 2005.
[47] M H Loke, “Electric Imaging surveys for environmental and engineering studies: A practical guide for 2-D and 3-D surveys,” Sunbyberg, Sweden: ABEM Instrument, 2000.
[48] M J Sansalone, and W B Streett, Impact-echo: Nondestructive Evaluation of Concrete and Masonry,Ithaca, NY: Bullbrier, 1997.
[49] Society of Exploration Geophysicists of Japan, Application manual of geophysical methods to engineering and environmental problems, Houten, Netherlands: European Association of Geoscientists and Engineers, 2014.
[50] H Wang, S-C Hsieh, C Lin, and C-Y Wang “Forensic diagnosis on flood-induced bridge failure. I: The determination of the possible causes of failure.” J. Perform. Constr. Facil. 28 (1): 76–84, 2014.
[51] H Wang, C-H Hu, and C-Y Wang, “NDT-based identification on an unknown bridge foundation,” e-J. Nondestr. Test. 20 (11): 888-896, 2015.
[52] W E Wightman, F Jalinoos, P Sirles, and K. Hanna, “Application of geophysical methods to highway related problems,” Rep. No. DTFH68-02-P-00083. Lakewood, CO: Central Federal Lands Highway Division, 2003.
[53] Y Lin, M J Sansalone, and N J Carino, “Impact-Echo Response of Concrete Shafts,” Geotechnical Testing Journal, Vol. 14, No. 2, pp. 121-137, 1991.
[54] H C Chao, “An Experimental Model for Non-Destructive Evaluation on Pile Foundations Using Guided Wave Approach,” Ph.D. Dissertation, Northwestern University, Evanston, Illinois, U.S.A, 2002.
[55] R J Finno, J S Popovics, A A Hanifah, W L Kath, H-C Chao, and Y-H Hu, “Guided Wave Interpretation of Surface Reflection Techniques for Deep Foundations,” Italian Geotechnical Journal, Vol. 35, No. 1, pp. 76-91, 2001.
[56] H Wang, B-T Chen, J-J Wang, and T-P Chang, “Identification of Resonant Frequency on Concrete Piles Using Guided Wave Theory,” Proceedings of the 13th Conference on Current Researches in Geotechnical Engineering in Taiwan, Yi-Lan, Taiwan, CD-ROM format, pp. C-04-1~C-04-6, 2009.
[57] N-E Huang, “Introduction to the Hilbert-Huang Transform and its Related Mathematical Problems,” in Hilbert-Huang Transform and its Applications, pp. 324-331, 2005.
[58] V R Schaefer and F Jalinoos, “Characterization of bridge foundations workshop,” Report No FHWA-HRT-13-101, Federal Highway Administration, Office of Infrastructure Research and Development, Virginia, USA, 2013.
[59] H Wang, “A simple approach to determine pile lengths using flexural wave frequency spectrum information,” Insight Non-Destructive Testing and Condition Monitoring, Vol 62, No 6, pp 357-364, 2020.
[60] S-H Ni, J-J Charng, and K-F Lo, “Non-destructive evaluation of in-isolation pile shaft integrity by Wigner-Ville distribution,” Journal of Mechanics, Vol 23, No 1, pp 15–21, 2007.
[61] M Subhani, J Li, B Samadi, and N Yan, “Determination of the embedded lengths of electricity timber poles utilising flexural wave generated from impacts,” Australian Journal of Structural Engineering, Vol 14, No 1, pp 85-96, 2013.
[62] A T M Farid, “Prediction of unknown deep foundation lengths using the Hilbert Huang transform (HHT),” HBRC Journal, Vol 8, No 2, pp 123-131, 2012.
[63] S-H Ni, P-H Tsai, Y-Z Yang, and W-H Chou, “Improved approach for determining pile length of group pile using complex continuous wavelet transform,” Journal of Testing and Evaluation, Vol 47, No 3, pp 1920–1934, 2018.
[64] C-C Lin, P-L Liu, and P-L Yeh, “Application of empirical mode decomposition in the impact-echo test crack”, NDT & E Internal, Vol 42, No 7, pp 589–598, 2009.
[65] Deering, Ryan, and J F Kaiser, “The use of a masking signal to improve empirical mode decomposition,” Proceedings of the (ICASSP′05), IEEE International Conference on Acoustics, Speech, and Signal Processing, Vol 4, pp 485- 488, 2005.
[66] C-H Juan, K T Nguyen, W-K Liang, A J Quinn, Y-H Chen, N G Muggleton, J-R Yeh, M W Woolrich, A C Nobre, Huang NE, “Revealing the dynamic nature of amplitude modulated neural entrainment with Holo-Hilbert spectral analysis,” Frontiers in Neuroscience, Vol 15, 2021.
[67] H Li, Y Zhang, and H Zheng, “Hilbert-Huang transform and marginal spectrum for detection and diagnosis of localised defects in roller bearings,” J Mech Sci Technol, Vol 23, No 2, pp 291-301, 2009.
[68] A Bedford, D S Drumheller , Introduction to Elastic Wave Propagation, John Wiley & Sons Ltd., New York, pp 83-89, 1994.
[69] W E Wightman, F Jalinoos, P Sirles, K Hanna, “Application of geophysical methods to highway related problems,” Report No. DTFH68-02-P-00083, Central Federal Lands Highway Division, Lakewood, Colorado, U.S.A, 2003.
[70] R J Finno, “1-D wave propagation techniques in foundation engineering,” In: The Art of Foundation Engineering Practice, Geotechnical Special Publication (GSP) No.198, West Palm Beach, Florida, U.S.A., 260-277, 2010.
[71] H Wang, C-H Hu, and C-Y Wang “NDT-based identification on an unknown bridge foundation,” Proceedings of the International Symposium on Non-Destructive Testing in Civil Engineering (NDT-CE 2015), Berlin, Germany, pp. 888-896, 2015.
[72] N C Smith, K Vozoff, “Two dimensional DC resistivity inversion for dipole–dipole data,” IEEE Transactions on Geoscience and Remote Sensing ,GE-22:21-28, 1984.
[73] Y Sasaki, “Resolution of resistivity tomography inferred from numerical simulation,” Geophysical Prospecting 40, No.4 , 453-464, 1992.
[74] T Dahlin, “2D resistivity surveying for environmental and engineering applications,” First Break 14, No.7, 275-283,1996.
[75] J Zhe, S Greenhalgh, L Marescot, “Multi-channel, full waveform and flexible electrode combination resistivity imaging system,” Geophysics 72, No.2, pp F57-F64, 2007.
[76] D LaBrecque, M Miletto, W Daily, A Ramirez, and E Owen, “The effects of noise on Occam’s inversion of resistivity tomography data,” Geophysics 61, No.2, pp. 538-548, 1996.
[77] M H Loke, R D Barker, “Rapid least-squares inversion of apparent resistivity pseudosections by a quasi-Newton method,” Geophysical Prospecting,” 44(1), pp. 131-152, 1996.
[78] P Mauriello, D Monna, D Patella, “3-D geoelectric tomography and archaeological applications,” Geophysical Prospecting, 46(5), 543-570, 1998.
[79] P Mauriello, D Patella, “Resistivity anomaly imaging by probability tomography,” Geophysical Prospecting, 47(3), pp. 411-429,1999.
[80] B Zhou, S A Greenhalgh, “Explicit expressions and numerical calculations for the Fréchet and second derivatives in 2.5D Helmholtz equation inversion,” Geophysical Prospecting, 47(4), pp. 443-468, 1999.
[81] M H Loke, J E Chambers, D F Rucker, O Kuras, P B Wilkinson, “Recent development in the direct-current geoelectrical imaging method,” Journal of Applied Geophysics, 95, pp. 135-156, 2013.
[82] T Dahlin, B Zhou, “A numerical comparison of 2D resistivity imaging with 10 electrode arrays,” Geophysical Prospecting, 52(5), pp. 379-398, 2004.
[83] R Persico, S Piro, and N Linford, Editors, Innovation in Near-Surface Geophysics: Instrumentation, Application, and Data Processing Methods. Elsevier, 2018.
[84] C-H Hu and M-H Chen, “Resistivity Image Lateral Detection Applied to Investigation of Unknown Bridge Pier Foundation,” Taiwan Professional Civil Engineers Association, No 646, 2009. (http://www.twce.org.tw/modules/ freecontent/include .php?fname=twce/paper/646/3-1.htm) [In Chinese]
|