參考文獻 |
參考文獻
[1] 許坤明,非傳統加工,全華圖書,台北市,民國九十九年。
[2] D. K. Aspinwall., et al., “Workpiece surface roughness and integrity after WEDM of Ti-6Al-4V and Inconel 718Annals-Manufacturing Technology using minimum damage generator technology”, CIRP Annals-Manufacturing Technology, Vol.57, pp.57, 2008.
[3] J. W. Liu., et al., “Wire electrochemical discharge machining of Al2O3 particle reinforced aluminum alloy 6061”, Materials and Manufacturing Technology, Vol.24, pp.446-453, 2009.
[4] N. G. Patil., et al., “Determination of material removal rate in wire electro-discharge machining of metal matrix composites using dimensional analysis”, The International Journal of Advanced Manufacturing Technology, Vol.51, pp.599-610, 2010.
[5] 魏維良,CNC線切割放電加工,全華圖書。
[6] 蘇品書譯著,線切割放電加工,復漢出版社。
[7] 鍾雅健,線切割放電加工機,機械工業雜誌,pp.260-265。
[8] 王陳鵬,「線切割放電加工機加工性能均化之研究」,國立勤益科技大學,碩士論文,民國102年。
[9] Y. F. Luo., et al., “Investigation of silicon wafering by wire EDM”, Journal of Materials Science, Vol.27, pp.5805-5810, 1992.
[10] Y. Uno, A. Okada, Y. Okamoto and T. Hirano, “High performance slicing method of monocrystalline silicon ingot by wire EDM”, Initiatives of Precision Engineering at the Beginning of a Millennium, 10th International Conference on Precision Engineering(ICPE), pp. 219-223, 2002.
[11] D. Rakwal ., et al., “Fabrication of compliant high aspect ratio silicon microelectrode arrays using micro-wire electrical discharge machining”, Microsystem Technology-Micro-and Nanosystem-Information Storage and Processing Systems, Vol.15, pp.789-797, 2009.
[12] Kumar B., et al., “Influence of process parameters on performance charateristics during EDM of aluminum alloy 6082”, International Journal of Engineering Research & Technology, Vol.5, 2016.
[13] Bisaria, H. and P. Shandilya, “Experimental investigation on wire electric discharge machining (WEDM) of Nimonic C-263 super alloy”, Materials and Manufacturing Processes, Vol.34, pp.83-92, 2018.
[14] Thankachan, T., et al., “Prediction of surface roughness and material removal rate in wire electrical discharge machining on aluminum based alloys/composites using Taguchi coupled Grey Relational Analysis and Artificial Neural Networks”, Applied Surface Science, Vol.472, pp. 22-35, 2019.
[15] Ikram, A., et al., “Parametric optimization for surface roughness, kerf and MRR in wire electrical discharge machining (WEDM) using Taguchi design of experiment”, Journal of Mechanical Science and Technology, Vol.27, pp.2133-2141, 2013.
[16] Ramamurthy A., et al., “Taguchi-Grey computation methodology for optimum multiple performance measures on machining titanium alloy in WEDM process”, India Journal of Engineering & Materials Sciences, Vol.22, pp.181-186, 2015.
[17] Motorcu, A.R., E. Ekici, and A. Kuş, “Investigation of the WEDM of Al/B4C/Gr reinforced hybrid composites using the Taguchi method and response surface methodology”, Science and Engineering of Composite Materials, Vol.23, 2015.
[18] Rao.T. B., et al., “Optimizing machining parameters of wire-EDM process to cut Al7075/SiCp composites using an integrated statistical approach”, Advances in Manufacturing, Vol.22, pp.202-216, 2016.
[19] Ekici. E., et al., “Evaluation of surface roughness and material removal rate in the wire electrical discharge machining of Al/B4C composites via the Taguchi method”, Journal of Composite Materials, Vol.50, 2016.
[20] Jafari, R., et al., “Modeling and analysis of surface roughness of microchannels produced by μ-WEDM using an ANN and Taguchi method”, Journal of Mechanical Science and Technology, Vol.31, pp. 5447-5457, 2017
[21] Chakradhar A., et al., “Multi-Objective Optimization of Electrochemical machining of EN31 steel by Grey Relational Analysis”, International Journal of Modeling and Optimization, Vol.1, pp.113-117, 2011.
[22] Thanigaivelan R et al., “Optimization of process parameters on mechining rate and overcut in electrochemical micromachining using grey relational analysis”, Journal of Scientific & Industrial Research, Vol.72, pp.36-42, 2013.
[23] Rajyalakshmi. G., et al., “Multiple process parameter optimization of wire electrical discharge machining on Inconel 825 using Taguchi grey relational analysis”, International Journal of Advanced Manufacturing Technology, Vol.69, pp.1249-1262, 2013.
[24] Liu, J., et al., “Experimental Investigation on Electrochemical Machining of γ-TiAl Intermetallic”, Procedia CIRP, Vol.35, pp.20-24. 2015.
[25] Jeykrishnan, J., et al., “Parametric analysis on Electro-chemical machining of SKD-12 tool steel”, Materials Today: Proceedings, Vol.4, pp.3760-3766. 2017.
[26] Nain. S. S., “Evaluation and analysis of cutting speed, wire wear ratio, and dimensional deviation of wire electric discharge machining of super alloy Udimet-L605 using support vector machine and grey relational analysis”, Advances in Manufacturing, Vol.6, pp.225-246, 2018.
[27] Kavimani. V., et al., “Influence of machining parameters on wire electrical discharge machining performance of reduced graphene oxide/magnesium composite and its surface integrity characteristics”, Composites Part B-engineering, Vol.167, pp 621-630, 2019.
[28] 倉藤尚雄、鳳承三郎著,鄒大鈞譯,放電加工,復漢出版社,1999。
[29] 齊藤長男,蘇品書譯,線放電切割加工,復漢出版社,1996。
[30] 張渭川,放電加工的結構與實用技術,全華圖書,1996。
[31] 林宏彥,絕緣液中添加鋁粉對切割放電加工之影響,國立中央大學,碩士論文,民國93年。
[32] 江金山、吳佩玲、張宏志等人,灰色理論,五南圖書出版公司,台北市,2009年。
[33] 溫坤禮、趙鍾賢、蔣祥第等人,灰色理論入門,高立圖書有限公司,台北市,1998年。
[34] 王則眾、林大維,整合田口式實驗計畫法與灰色關聯分析於快速原型製程最優化研究,科技管理學刊,pp. 111-138,民國94年。
[35] 王則眾、葉瑞平,鐵鋁基合金線切割放電加工特性之研究,中正醫學報,第三十一卷,第二期,民國92年。
[36] 王則眾、魯基才等人,應用類神經網路與田口式實驗計畫法於品質特性之研究,創新與管理,pp. 91-112,民國94年。
[37] 鄭燕琴編著,田口品質工程技術理論與實務,中華民國品質管制學會,台北市,1995年。
[38]孔祥桓,利用灰色關聯分析法探究遮罩式電化學穿孔之最佳化參數,
國立中央大學,碩士論文,民國107年。
|