參考文獻 |
[1] Pimpalte, V., and Shilwant, S.C., “Topology Optimization of Gears from Two Wheeler Gear Set Using Parametric Study,” Journal of Mechanical and Civil Engineering, Vol. 14, pp.22-31, 2017.
[2] Alexandru, P., Macaveiu, D., and Alexandru, C., “A gear with translational wheel for a variable transmission ratio and applications to steering box,” Mechanism and Machine Theory, Vol. 52, pp.267-276, 2012.
[3] Osman, T., and Velex, Ph., “A Model for the Simulation of the Interactions between Dynamic Tooth Loads and Contact Fatigue in Spur Gears,” Tribology International, Vol. 46, pp. 84-96, 2012.
[4] Litvin, F. L., and Fuentes, A. F., “Gear Geometry and Applied Theory, Cambridge University Press, 2nd Edition, 2004.
[5] Goria, C., Rosa, F., and Conrado, E., “Bending Fatigue Strength of Case Carburized and Nitrided Gear Steels for Aeronautical Applications,” International Journal of Applied Engineering Research, Vol.12, pp.11306-11322, 2017.
[6] Lewicki, D.G., Decker, H. J., and Shimski, J. T.,“Development of a Full-Scale Transmission Testing Procedure To Evaluate Advanced Lubricants,” NASA Technical Paper 3265, August, 1992.
[7] Military Specification, Lubricating Oil Aircraft Turbine Engine Synthetic Base, MIL-L-23699-E, 25, August , 1994.
[8] KISSsoft, Verifying a cylindrical gear pair, KISSsoft 03/2017-Turtorial 8, 2017.
[9] KISSsoft, Shaft analysis, KISSsoft 03/2017-Turtorial 5, 2017.
[10] ISO 6336, Calculation of Load Capacity of Spur and Helical Gears: Part 1: Basic principles, introduction and general influence factors, International Standard, 1996.
[11] ISO 6336, Calculation of Load Capacity of Spur and Helical Gears. Part 2: Calculation of surface durability (pitting), International Standard, 2006.
[12] ISO 6336, Calculation of Load Capacity of Spur and Helical Gears: Part 3: Calculation of tooth bending strength, International Standard, 2006.
[13] DIN 3990, (English): Calculation of Load Capacity of Cylindrical Gears; Application Standard for Industrial Gears, Beuth Webshop, 1989.
[14] SKF,SKF 綜合型錄,SKF 集團,2010。
[15] TIMKEN, Aerospace Design Guide for Precision Metric Ball and Cylindrical Roller Bearings, TIMKEN Company, 2016.
[16] 徐峰、李慶祥,精密機械設計,清華大學出版社有限公司, p.627, 2007。
[17] MSC Inc., MSC ADAMS Reference Manual, pp.11-15, 2017.
[18] Giesbers, J., “Contact Mechanics in MSC ADAMS-A Technical Evaluation of the Contact Models in Multibody Dynamics Software MSC Adams,” University of Twente, 2012.
[19] del Rincon, AF., Viadero, F., Iglesias, M., and García, P., and de-Juan, A., and Sancibrian, R., “A model for the study of meshing stiffness in spur gear transmissions,” Mechanism and Machine Theory, Vol. 61, pp. 30-58, 2013.
[20] Wan, F., Li, G.X., Gong, J.Z., and Wu, B.Z., “Dynamic study of anti-backlash gears and angle-contact ball bearing based on a simplification of the Hertz contact theory,” Journal Engineering Manufacture, Vol. 230, pp. 66-82, 2016.
[21] Yang, W.G., Jiang, D.X., and Han, T., “Effects of tooth breakage size and rotational speed on the vibration response of a planetary gearbox,” Applied Science, 2017.
[22] Wang, Y., and Zhang, W.J., “Stochastic vibration model of gear transmission Systems Considering Speed-Dependent Ramdom Errors,” Nonlinear Dynamics, Vol. 17, pp.187-203, 1998.
[23] Zhang, H., Wei, G.S., Wen, B.G., and Han, Q.K., and Hao, H., “Meshing characteristics of geared rotor system in integrally geared compressor with unbalance excitation,” Journal of Vibration and Control, Vol. 25, pp.26-40, 2018.
[24] Kong, D., Meagher, J.M., Xu, C., and Wu, X., and Wu, Y., “Nonlinear Contact Analysis of Gear Teeth for Malfunction Diagnostics,” Conference and Exposition on Structural Dynamics: Orlando, Florida, 2008.
[25] Huston, R.L., “Multi-body dynamics including the effects of flexibility and compliance,” Computers & Structures, Vol. 14, pp. 443-451, 1981.
[26] 陳義仁,受負載之正齒輪對的傳動誤差探討,碩士論文,國立交通大學,臺灣,2005。
[27] 林立,基於虛擬樣機技術的集裝箱起重機動力仿真研究,碩士論文,上海海事大學,中國大陸,2007。 |