參考文獻 |
[1] T. Matsuoka, J. I. Takabatake, A. Koiwai, Y. Inoue, S. Yamamoto, and H. Takahashi, "Integrated simulation to predict warpage of injection molded parts," Polymer Engineering & Science, vol. 31, pp. 1043-1050, 1991.
[2] C. Chan, Y. Chen, S. Chang, T. Huang, and M. Hsu, "Design and analysis of isostatic mounts on a spaceborne lightweight primary mirror," in Optomechanical Engineering, 2013.
[3] K. Jansen, D. Van Dijk, and M. Husselman, "Effect of processing conditions on shrinkage in injection molding," Polymer Engineering & Science, vol. 38, pp. 838-846, 1998.
[4] W. Gao, S. Kiyono, and T. Sugawara, "High-accuracy roundness measurement by a new error separation method," Precision engineering, vol. 21, pp. 123-133, 1997.
[5] M. Kurt, Y. Kaynak, O. S. Kamber, B. Mutlu, B. Bakir, and U. Koklu, "Influence of molding conditions on the shrinkage and roundness of injection molded parts," The International Journal of Advanced Manufacturing Technology, vol. 46, pp. 571-578, 2010.
[6] 李進順,長筒形塑膠件之射出成形模擬之探討,碩士論文,機械與電腦輔助工程學系,逢甲大學,台中市,2015。
[7] 黃詠農,長筒形塑件冷卻方式與最佳製程參數之探討,碩士論文,機械與電腦輔助工程學系,逢甲大學,台中市,2016。
[8] G. E. Box and K. B. Wilson, "On the experimental attainment of optimum conditions," in Breakthroughs in statistics, ed: Springer, 1992, pp. 270-310.
[9] Y.-T. Jou, W.-T. Lin, W.-C. Lee, and T.-M. Yeh, "Integrating the Taguchi method and response surface methodology for process parameter optimization of the injection molding," Applied Mathematics & Information Sciences, vol. 8, 2014.
[10] M.-C. Huang and C.-C. Tai, "The effective factors in the warpage problem of an injection-molded part with a thin shell feature," Journal of materials processing technology, vol. 110, pp. 1-9, 2001.
[11] M. Pandian, S. Sivapirakasam, and M. Udayakumar, "Investigation on the effect of injection system parameters on performance and emission characteristics of a twin cylinder compression ignition direct injection engine fuelled with pongamia biodiesel–diesel blend using response surface methodology," Applied Energy, vol. 88, pp. 2663-2676, 2011.
[12] K.-T. Chiang and F.-P. Chang, "Analysis of shrinkage and warpage in an injection-molded part with a thin shell feature using the response surface methodology," The International Journal of Advanced Manufacturing Technology, vol. 35, pp. 468-479, 2007.
[13] 羅壬成,模流分析與射出成型控制參數的優化,碩士論文,工學院碩士在職專班精密與自動化工程學程,國立交通大學,新竹市,2006。
[14] 周文祥,射出成型模具設計,新文京開發,2008。
[15] Moldex3D,成型條件篇—作業操作說明,科盛科技股份有限公司,2014。
[16] 百度百科,真圓度誤差測量。
Available:https://baike.baidu.com/item/%E7%9C%9F%E5%9C%86%E5%BA%A6#3
[17] 葉怡成,實驗計劃法—製程與產品最佳化,五南圖書出版公司,2001。
[18] 張英彬、駱景堯,以田口方法探討電力諧波濾波器之最佳化設計,技術期刊,2006。
[19] J. W. a. Sons, "Design and Analysis of Experiments, 9th Edition," Douglas C. Montgomery, 2017.
[20] Minitab. What are response surface design, central composite design, and Box-Behnken design?
Available:https://support.minitab.com/zh-cn/minitab/18/help-and-how-to/modeling-statistics/doe/supporting-topics/response-surface-designs/response-surface-central-composite-and-box-behnken-designs/
[21] E. Hu, "Using Boundary Layer Mesh (BLM) for complex geometries to ensure accuracy of mold-filling analyses," 2014.
[22] Moldex3D. 3-Minute Quick Start Guide of Moldex3D R17 Studio., 2019. Available:https://www.moldex3d.com/en/blog/tips-and-tricks/3-minute-quick-start-guide-of-moldex3d-r17-studio/
[23] 王茂齡、張榮語、許嘉翔,模流分析理論與實務,科盛科技股份有限公司,2018。
[24] A. Koschan and J. Antony, "Taguchi or classical design of experiments: a perspective from a practitioner," Sensor Review, 2006.
[25] 林秉正,以田口方法模擬分析減小手機背蓋翹曲量之射出成型最佳參數,碩士論文,材料與製造工程所,逢甲大學,台中市,2010。
[26] 張光維,一模四穴微小型鏡筒真圓度最佳化之模流分析,碩士論文,機械與電腦輔助工程學系,逢甲大學,台中市,2017。 |