參考文獻 |
1. 馮耀鋆,「三維導電微成型技術開發應用於微機電系統之研究」,國立中央大學,博士論文,民國107年。
2. Romero, E., M. Neuman, and R. Warrington, "Rotational energy harvester for body motion", 2011 IEEE 24th international conference on micro electro mechanical systems, 2011 IEEE, p. 1325-1328.
3. Halim, M., et al., "An electromagnetic rotational energy harvester using sprung eccentric rotor, driven by pseudo-walking motion", Applied Energy, 2018. 217: p. 66-74.
4. Miyoshi, T., et al. "Low-profile rotational electret generator using print circuit board for energy harvesting from arm swing", 2018 IEEE Micro Electro Mechanical Systems (MEMS), 2018 IEEE, p.230-232.
5. Xu, R., et al., "Fabric-based stretchable electronics with mechanically optimized designs and prestrained composite substrates", Extreme Mechanics Letters, 2014, 1: p. 120-126.
6. Larmagnac, A., et al., "Stretchable electronics based on Ag-PDMS composites", Scientific reports, 2014. 4(1): p. 1-7.
7. Jeong, Y.R., et al., "A skin-attachable, stretchable integrated system based on liquid GaInSn for wireless human motion monitoring with multi-site sensing capabilities" NPG Asia Materials, 2017. 9(10): p. e443-e443.
8. Kim, S., et al., "Consistent and reproducible direct ink writing of eutectic gallium–indium for high-quality soft sensors", Soft robotics, 2018. 5(5): p. 601-612.
9. Yeatman, E., "Energy harvesting from motion using rotating and gyroscopic proof masses", Proceedings of The Institution of Mechanical Engineers Part C-journal of Mechanical Engineering Science - PROC INST MECH ENG C-J MECH E, 2008. 222.
10. Kamper, M.J., R.-J. Wang, and F.G. Rossouw, "Analysis and performance of axial flux permanent-magnet machine with air-cored nonoverlapping concentrated stator windings", IEEE Transactions on Industry Applications, 2008. 44(5): p. 1495-1504.
11. Wang, X., et al., "Electromagnetic design and analysis of axial flux permanent magnet generator with unequal-width PCB winding", IEEE Access, 2019. 7: p. 164696-164707.
12. Zrnic, D. and D. Swatik, "On the resistivity and surface tension of the eutectic alloy of gallium and indium", Journal of the less common metals, 1969. 18(1): p. 67-68.
13. Liu, T., P. Sen, and C.-J. Kim, "Characterization of nontoxic liquid-metal alloy galinstan for applications in microdevices", Journal of Microelectromechanical Systems, 2011. 21(2): p. 443-450.
14. Neumann, T. and M. Dickey, "Liquid Metal Direct Write and 3D Printing: A Review", Advanced Materials Technologies, 2020. 5: p. 2000070.
15. Cook, A., et al., "Shear‐Driven Direct‐Write Printing of Room Temperature Gallium‐Based Liquid Metal Alloys", Advanced Engineering Materials, 2019. 21.
16. Cordero, R., et al., "Micro-rotational electromagnetic generator for high speed applications", 2012 IEEE 25th International Conference on Micro Electro Mechanical Systems (MEMS), 2012 IEEE, p. 1257-1260.
17. Dickey, M., et al., "Eutectic Gallium-Indium (EGaIn): A Liquid Metal Alloy for the Formation of Stable Structures in Microchannels at Room Temperature", Advanced Functional Materials, 2008. 18, p. 1097-1104.
18. Ma, R., Y. Zhou, and J. Liu, "Erasing and Correction of Liquid Metal Printed Electronics Made of Gallium Alloy Ink from the Substrate.", arXiv
preprint arXiv:1706.01457, 2017.
19. Boley, J., et al., "Direct Writing of Gallium-Indium Alloy for Stretchable Electronics", Advanced Functional Materials, 2014, p. 3501-3507.
20. Gannarapu, A. and B.A. Gozen, "Freeze-Printing of Liquid Metal Alloys for Manufacturing of 3D, Conductive, and Flexible Networks", Advanced Materials Technologies, 2016. 1(4): p. 1600047.
21. Tanzawa, T., "Design of DC-DC switched-capacitor voltage multiplier driven by DC energy transducer", 2014 21st IEEE International Conference on Electronics, Circuits and Systems (ICECS), 2014 IEEE, p. 327-330.
22. Vinko, D., "Applicability of Dickson Charge Pump in Energy Harvesting Systems: Experimental Validation of Energy Harvesting Charge Pump Model", Radioengineering, 2018. 27(2): p. 511. |