參考文獻 |
〔1〕 WorldAutoSteel:AHSS Application Guidelines 6.0.。 2017年,取自https://www.worldautosteel.org/projects/advanced-high-strength-steel-application-guidelines/。
〔2〕 WorldAutoSteel:ULSAB Overview Report.。 2015年,取自https://www.worldautosteel.org/projects/advanced-high-strength-steel-application-guidelines/。
〔3〕 Liu, S., et al., "DP600 dual phase steel thermo-elasto-plastic constitutive model considering strain rate and temperature influence on FEM residual stress analysis of laser welding.", Journal of Manufacturing Processes, Vol 35: pp. 407-419, 2018
〔4〕 Tamarelli and C.M.: AHSS 101: The Evolving Use of Advanced High-Strength Steels for Automotive Applications.。 2011,取自https://www.steel.org。
〔5〕 陳復國, et al., 「先進高強度鋼板沖壓成形之研究」,國立臺灣大學機械工程學系暨研究所,碩士論文,民國101年。
〔6〕 Kim, J., et al., "Effect of hardening laws and yield function types on spring-back simulations of dual-phase steel automotive sheets.", Metals and Materials International, Vol 12, pp. 293-305, 2006
〔7〕 BANDIVADEKAR, Z.Y.A.A.,:LIGHT-DUTY VEHICLE GREENHOUSE GAS AND FUEL ECONOMY STANDARDS.。 2017,取自https://theicct.org/publications/2017-global-update-LDV-GHG-FE-standards。
〔8〕 Peterson, G.: Vehicle Lightweighting: A Review of the Safety of Reduced Weight Passenger Cars and Light Duty Trucks.。2018年10月,取自https://theicct.org/publications/2017-global-update-LDV-GHG-FE-standards。
〔9〕 Erika Aparecida da, S., et al., “Comparison of springback effect of the dual phase steels 600 and 780 function to microstructure and mechanical properties.”,The 23rd ABCM International Congress of Mechanical Engineering.,Rio de Janeiro、Brazil,2015年12月
〔10〕 Abe, Y., et al., "Shearing of ultra-high strength steel sheets with step punch.", Procedia Manufacturing, Vol 15, pp. 597-604, 2018
〔11〕 羅培仁, 劉威良, and 謝克昌:熱沖壓硼鋼金相組成與硬度之研究.。 2014,取自https://www.yoke.net/chinese/main.asp?url=052&cid=174。
〔12〕 Gao, Q., et al., "Influence of hydrogen on formability and bendability of DP1180 steel for car body application.", IOP Conference Series: Materials Science and Engineering, Vol 159, 2016
〔13〕 K. Naoya, et al., "Tensile Behavior of Ferrite-martensite Dual Phase Steels with Nano-precipitation of Vanadium Carbides.", ISIJ International, Vol 55, pp. 1781-1790, 2015
〔14〕 Callister, W.D. and D.G. Rethwisch, Materials science and engineering : an introduction., John Wiley & Sons, Inc., United States of America, 2014.
〔15〕 De Moor E., et al., "Comparison of Hole Expansion Properties of Quench & Partitioned, Quench & Tempered and Austempered Steels.", SAE International, 2012
〔16〕 European Committee For Standardization:Continuously hot-dip coated steel flat products - Technical delivery conditions, in EN 10346:2009.。2009,取自http://www.hrsteels.com/。
〔17〕 voestalpine:Data sheet dual-phase high-ductility steels, in AHSS High-ductility.。2018,取自http:// www.voestalpine.com/。
〔18〕 卿家勝和沈厚發, 「冷軋雙相鋼DP800生產工藝及性能研究」,鐵釩鈦, 38, 2017。
〔19〕 康永林、李聲慈和朱國明, 「冷軋高强汽車板的高應變速率行為及纳米析出特徵」,中國金屬學會,10,1-6頁,2015。
〔20〕 Hu J., “Characterization and Modeling of Deformation, Springback, and Failure in Advanced High Strength Steels (AHSSs).”, Clemson University , Doctoral Dissertation, 2016.
〔21〕 Zhang, F., et al., “Morphology and distribution of martensite in dual phase (DP980) steel and its relation to the multiscale mechanical behavior.”, Materials Science and Engineering A, Vol 659: pp. 93-103, 2016
〔22〕 Taylor M.D., “Effect of microstructure on the fracture response of advanced high strength steels.”, Colorado School of Mines, Doctoral Dissertation, 2016.
〔23〕 Sakamoto, H., “Distinction between thermal and stress-induced martensitic transformations and inhomogeneity in internal stress.”, Materials Transactions Vol 43, pp. 2249-2255, 2002
〔24〕 H. Gong, et al., “Experimental investigation of the mechanical response of laser-welded dissimilar blanks from advanced- and ultra-high-strength steels.”, Materials & Design, Vol 90, pp. 1115-1123, 2016
〔25〕 D. Dong, et al., Effect of Strain Rate on Dynamic Deformation Behavior of Dp780 Steel.”, Acta Metallurgica Sinica, Vol 49, 2013
〔26〕 Q. Dai, et al., Behaviour and Mechanism of Strain Hardening for Dual Phase Steel Dp1180 under High Strain Rate Deformation.”, Acta Metallurgica Sinica, Vol 48, 2012.
〔27〕 H. Yu, Y. Guo, and X. Lai, “Rate-dependent behavior and constitutive model of DP600 steel at strain rate from 10−4 to 103s−1.”, Materials & Design, Vol 30, pp. 2501-2505, 2009.
〔28〕 Z. Marciniak, J.L. Duncan, and S.J. Hu, Second Edition, Mechanics of Sheet Metal Forming., Butterworth-Heinemann., Oxford, 2002.
〔29〕 R. Hill, “On discontinuous plastic states, with special reference to localized necking in thin sheets.”, Journal of the Mechanics and Physics of Solids, Vol 1,pp. 19-30, 1952.
〔30〕 H.W. Swift , “Plastic instability under plane stress.”, Journal of the Mechanics and Physics of Solids, Vol 1, pp. 1-18, 1952.
〔31〕 Z. Marciniak and K. Kuczyński, “Limit strains in the processes of stretch-forming sheet metal.”, Mechanics of Sheet Metal Forming, Vol 9, pp. 609-620, 1967.
〔32〕 J.W. Hutchinson and K.W. Neale, Mechanics of Sheet Metal Forming: Material Behavior and Deformation Analysis., Springer, Boston US: 1978.
〔33〕 S.P. Keeler, “Plastic instability and fracture in sheet stretched over rigid punches.”, Massachusetts Institute of Technology, Doctoral Dissertation, 1961.
〔34〕 G.M. Goodwin, “Application of strain analysis to sheet metal forming problems in the press shop.”, SAE International, 1968.
〔35〕 S. Dziallach, et al., “Sheet metal testing and flow curve determination under multiaxial conditions.”, Advanced Engineering Materials, Vol 9, pp. 987-994, 2007.
〔36〕 陳彥佑,「金屬薄板液壓膨脹實驗結合成形極限之設備研發與研究」,機械工程學系國立交通大學,碩士論文,民國101年。
〔37〕 S.F. Golovashchenko, A.J. Gillard and A.V. Mamutov, “Formability of dual phase steels in electrohydraulic forming.”, Journal of Materials Processing Technology, Vol 213, pp. 1191-1212, 2013.
〔38〕 C.L. Chow and M. Jie, “Forming limits of AL 6022 sheets with material damage consideration—theory and experimental validation.”, International Journal of Mechanical Sciences, Vol 46, pp. 99-122, 2004.
〔39〕 S.B. Kim, et al.,”Forming limit diagram of auto-body steel sheets for high-speed sheet metal forming.”, Journal of Materials Processing Technology, Vol 211, pp. 851-862, 2011.
〔40〕 Keeler, S., K. SP, and B. WG, “Relationship between laboratory material characterization and press-shop formability.”, Microalloying, Vol 75, 1975.
〔41〕 K.A. Raghavan, R. Van Kuren and H. Darlington, “Recent progress in the development of forming limit curves for automotive sheet steels.”, SAE Technical Paper, 1992.
〔42〕 D.E. Green and K.C. Black, “A visual technique to determine the forming limit for sheet materials.”, SAE Transactions, pp. 624-634, 2002
〔43〕 A.A. Konieczny, “Advanced high strength steels formability.”, American Iron and Steel Institute, 2003.
〔44〕 W. Schroeder, “Mechanics of sheet metal bending.”, Transactions of ASME, Vol 65, pp. 817–827, 1943.
〔45〕 F.J. Gardiner, “The springback of metals.”, Transactions of ASME, Vol 79, pp. 1-9, 1957.
〔46〕 J.M. Alexander, “An analysis of the plastic bending of wide plate and the effect of stretching on transverse residual stresses.”, Proceedings of the Institution of Mechanical Engineers, Vol 173, pp. 73-96, 1959.
〔47〕 B.W. Shaffer and E.E. Ungar, “Mechanics of the sheet-bending process.”, Transactions of ASME, pp. 34-40, 1960.
〔48〕 S.H. Crandall, N.C. Dahl, and E.H. Dill, “An introduction to the mechanics of solids.”, Physics Today, Vol 13, pp. 46, 1960.
〔49〕 B.M. BOTROS, “Springback in sheet metal forming after bending.”, ASME, 1967.
〔50〕 J. Wang, et al., “Springback control of sheet metal air bending process.”, Journal of Manufacturing Processes, Vol 10, pp. 21-27, 2008.
〔51〕 E.A. da Silva, et al., “A comparison between an advanced high-strength seel and a high-strength steel Due to the spring back effect.”, IOSR Journal of Mechanical and Civil Engineering, Vol 13, pp. 21-27, 2016.
〔52〕 陳復國等編著, 「先進高強度鋼板沖壓成形之研究」,行政院國家科學委員會專題研究計畫,國立臺灣大學機械工程學系暨研究所,2012。
〔53〕 S. Ján and J. Miroslav, Analytical and numerical prediction of springback in sheet metal bending.”, Journal for Technology of Plasticity, Vol 38, 2013.
〔54〕 X. Yang, et al., “Prediction of springback in air-bending of advanced high strength steel (DP780) considering Young׳s modulus variation and with a piecewise hardening function.”, International Journal of Mechanical Sciences, Vol 105,pp. 266-272, 2016.
〔55〕 H. Kim, et al., “Effects of variable elastic modulus on springback predictions in stamping advanced high-strength steels (AHSS).”, Steel Res. Int, Vol 8, pp. 628-633, 2011.
〔56〕 J. Jung, et al., “Anisotropic hardening behaviour and springback of advanced high-strength steels.”, Metals, Vol 7, 2017.
〔57〕 A.M. Cantara, et al., “Predicting elastic anisotropy of dual-phase steels based on crystal mechanics and microstructure.”, International Journal of Mechanical Sciences, Vol 151, pp. 639-649, 2019.
〔58〕 張志毅和何明雄, 應用剪刀試驗於DP980高強度鋼之Yoshida-Uemori材料模型研究. 桃園創新學報,第35期,49頁-66頁,2015年。
〔59〕 ASTM:Standard Test Methods for Tension Testing of Metallic Materials:ASTM-E8, 2019年2月14日,取自https://www.astm.org/。
〔60〕 張小千,「高強度7075-T4鋁合金之溫間成形研究」,國立中央大學,碩士論文,2014。
〔61〕 林威智,「應用微影技術於板金成形網格尺寸效應之研究」,國立成功大學,碩士論文,2002。
〔62〕 S. Chatti and N. Chtioui, “Sheet metal forming simulation using finite elastoplasticity with mixed isotropic/kinematic hardening.”, European Journal of Computational Mechanics, Vol 20, pp. 427-453, 2012. |