Process Development of Recovered Terephthalic Acid from Poly(ethylene terephthalate) Recycling

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：175

、訪客IP：3.145.188.7

姓名

邱琪雯(Chi-Wen Chiu) 查詢紙本館藏

畢業系所

化學工程與材料工程學系

論文名稱

(Process Development of Recovered Terephthalic Acid from Poly(ethylene terephthalate) Recycling)

相關論文

★ 藉由結晶製程製備高水溶性化合物：十二烷基硫酸鈉（SDS）以及控制其水合物	★ 唑來膦酸三水合物的初始溶劑篩選和在羥基磷灰石之表面吸附行為
★ 乙烯氨酚的結晶研究:溶劑.界面與固態分散的篩選	★ 外消旋(R/S)-(+/-)伊普的初始溶劑篩選及伊普鈉鹽結晶動力學
★ 外消旋(R,S)-(±)-伊普鹽二水化合物的介晶質,成核與結晶成長	★ 卡爾指數與溶解速率常數的交叉行為關係與混合率的應用:批次對乙醯氨基酚的研究
★ 蔗糖的同質異構型構	★ 磺胺噻唑的初始/雞尾酒混合溶劑式篩選和利用多型晶體的耕作方式篩選
★ 關於量產路徑之初步鹽類篩選程序:以外消旋布洛芬之兩個不同鹽類為例	★ 卡馬西平的初始溶劑篩選應用在球形結晶技術來做固體藥劑的精益製造
★ 西咪替丁的初始溶劑篩選應用在球形結晶技術來做固體藥劑的精益製造	★ 利用超音波結晶法降低小分子有機半導體分子的昇華點以及藉由蛋殼膜增進AlQ3奈米管的光激發螢光強度
★ 仿效生物膽結石的形成：在逐漸演化的（牛磺膽酸鈉-卵磷質-膽固醇）複雜脂質系統中結晶碳酸鈣	★ 蔗糖的多構形多形晶體與乙醯氨酚共溶劑篩選
★ 共晶化合物的篩選、製備、鑑定、分子辨認及應用：胞嘧啶和二羧酸的研究	★ 生命的起源與天門冬氨酸在水中的結晶

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

由於寶特瓶(poly(ethylene terephthalate) bottles)的廣泛使用以及它不可生物降解的特性，寶特瓶的回收已經成為重要的議題。根據文獻，可以透過鹼水解來回收寶特瓶，反應所得的對苯二甲酸二鈉鹽(disodium terephthalate)可以經由加入硫酸(sulfuric acid)進而產生對苯二甲酸(terephthalic acid)，由於對苯二甲酸幾乎不溶於水的性質，因此在酸化過程中，對苯二甲酸會快速析出並產生非常小的顆粒，這些顆粒聚集並集結成硬塊，這將會增加後續過濾及乾燥上的困難。因此，本研究的主要為增加對苯二甲酸的顆粒大小以利於後續過濾及乾燥程序。首先，將寶特瓶碎片及氫氧化鈉水溶液加入附有200mL鐵氟龍杯的高壓反應器中並放入200oC烘箱，反應結束後，烘箱及高壓反應器自然降溫至室溫，過濾掉高壓反應器中殘留的固體或不純物並乾燥。所有的實驗皆在0.5L夾套玻璃攪拌槽中進行，攪拌器轉速為300rpm，使用硫酸將由鹼水解反應獲得的反應溶液酸化以得到對苯二甲酸。在本論文中進行了許多實驗以提升對苯二甲酸的特性，探討不同濃度的氫氧化鈉水溶液、反應溫度、二甲基亞碸(DMSO)體積以及硫酸的濃度和體積所造成的影響。並應用了立方添加法(cubic addition)、冷卻操作和溫度循環以降低對苯二甲酸的成核速率以及產生更大的對苯二甲酸顆粒。可藉由實驗中進行採樣觀察和評估顆粒大小及型態的演變，對苯二甲酸析出後將溶液過濾並乾燥，進而計算出濾餅阻力和乾燥時間。另外，二甲基亞碸的添加也能降低成核速率進而產生更大的對苯二甲酸。操作溫度是影響對苯二甲酸顆粒大小最主要的參數，當操作溫度越高，對苯二甲酸在二甲基亞碸中的溶解度越高，提供更寬的操作範圍以產生更大的對苯二甲酸，濾餅阻力越小。最後，從光學顯微鏡(OM)、傅立葉轉換紅外線光譜儀(FT-IR)、粉末X射線繞射儀(PXRD)和核磁共振儀(NMR)的檢測結果分別確認對苯二甲酸的化學特性與結構。

摘要(英)

Recycling Poly(ethylene terephthalate) (PET) bottles has been discussed widely since its omnipresence and not biodegradable characteristic. It has been reported that PET can be recycled by alkaline hydrolysis. The recycled terephthalate disodium salt can be further converted to terephthalic acid (TPA) by treating with sulfuric acid (H2SO4). Since TPA is almost insoluble in aqueous media, its fast precipitation after the recovery via acidification causes very small TPA particles. They get lumped together to form a hard cake, and as a result, make filtration and drying difficult. Therefore, the aim of my research is to enhance the particle size to improve the downstream processing such as filtration and drying. First, a certain amount of PET flakes and aqueous solution of NaOH were added into an autoclave containing a Teflon cup of 200 mL size. The autoclave was then placed in a preheated oven at 200oC, then the autoclave was cooled to room temperature overnight along with the oven by turning it off. The solids and/or other impurities remaining in the autoclave were then filtered, dried at 40oC, weighed and characterized by FTIR. All experiments were carried out in a 0.5 L sized jacketed glass stirred tank, equipped with a four-bladed impeller, and a water jacket at different temperatures. The agitator was set to 300 rpm. The reaction mixture from PET recycling was acidified by aqueous H2SO4 solution to obtain TPA. To improve the properties of recovered TPA, many experiments were performed to engineer TPA precipitates. Experiments with the variables, such as different concentrations of aqueous NaOH solutions, reaction temperatures, DMSO volumes, and H2SO4 concentrations/volumes were carried out in this thesis. Cubic addition method was employed here to reduce the nucleation rate of TPA precipitation. Furthermore, to avoid the occurrence of fast precipitation of TPA by acidification or feeding, a ‘‘cooling’’ operation and a temperature cycle were applied to produce larger crystals of TPA. By means of sampling during the course of TPA recovery, the evolution of particle size and morphology could be observed and evaluated. After precipitation of TPA, the slurry was filtered and dried so that the specific cake resistance and drying time could be calculated. The addition of the reaction solution into the pre-charged DMSO could be used to slow down the nucleation rate so as to produce a larger size of TPA particles. Operating temperature was the dominant parameter for enhancement crystal size of TPA. The higher operating temperature was, the higher solubility of TPA in DMSO was. The higher solubility provided a wider operating window to achieve larger particle size of TPA and the smaller specific cake resistance. The results of the specific cake resistance approximately agreed with the trend in the particle size distribution of TPA. The solid-state characterizations for all sample solids by optical microscopy (OM), Fourier transform infrared spectroscopy (FT-IR), powder X-ray diffraction (PXRD), and nuclear magnetic resonance (NMR) were carried out for ensuring the chemical and structural identity of the recovered TPA.

關鍵字(中)

★ 寶特瓶回收
★ 對苯二甲酸
★ 顆粒大小

關鍵字(英)

★ poly(ethylene terephthalate) recycling
★ terephthalic acid
★ particle size

論文目次

Table of Contents
摘要 i
Abstract iii
Acknowledgement v
Table of Contents vi
List of Figures ix
List of Tables xiii
Chapter 1 Introduction 1
1.1 Poly(ethylene terephthalate) 1
1.2 Chemical Recycling of Poly(ethylene terephthalate) 3
1.3 Recovery of Terephthalic Acid from PET Recycling 7
1.4 Filtration and Drying 12
1.5 Conceptual Framework 16
1.6 References 18
Chapter 2 Experimental Materials and Methods 23
2.1 Materials 23
2.1.1 Chemicals 23
2.1.2 Solvents 23
2.2 Experimental Procedure 25
2.2.1 Initial Solvent Screening 25
2.2.2 Solubility Curves Measurement 27
2.2.3 Poly(ethylene terephthalate) Recycling by Alkaline Hydrolysis 28
2.2.4 Terephthalic Acid Recovery from PET Recycling 30
2.2.5 Filtration 35
2.2.6 Drying 35
2.3 Analytical Measurements 36
2.3.1 Optical Microscopy (OM) 36
2.3.2 Scanning Electron Microscopy (SEM) 36
2.3.3 Fourier Transform Infrared (FT-IR) Spectroscopy 37
2.3.4 Powder X-Ray Diffraction (PXRD) 37
2.3.5 Nuclear Magnetic Resonance Spectroscopy (NMR) 37
2.4 References 38
Chapter 3 Results and Discussion 40
3.1 Solubility Curves 40
3.2 Poly(ethylene terephthalate) Recycling 41
3.3 Recovery of Terephthalic Acid from PET Recycling 44
3.4 Filtration and Drying 62
3.5 Solid-State Characterization 67
3.5.1 Fourier Transform Infrared (FT-IR) Spectroscopy 67
3.5.2 Powder X-Ray Diffraction (PXRD) 70
3.5.3 Nuclear Magnetic Resonance Spectroscopy (NMR) 71
3.6 References 73
Chapter 4 Conclusions and Future Work 75
4.1 Conclusions 75
4.2 Future work 77
4.3 References 78

參考文獻

Chapter 1
1 Hopewell, J.; Dovrak, R.; Kosior, E. Plastics recycling: challenges and opportunities. Philosophical transactions of the royal society B: biological sciences, 2009, 364(1526), 2115-2126.
2 Dasan, K. P. PET Nanocomposites: preparation and characterization. Poly(ethylene terephthalate) based blends, composites and nanocomposites, 2015, pp 99-111
3 Chauisupalkitsin, M.; Chairat-utai, P.; Jarusiripot, C. Degradation of polyethylene terephthalate bottles after long sunlight exposure. Songklanakarin J. Sci. Technol. 2019, 41(2), 259-264.
4 Plastic soup foundation
(https://www.plasticsoupfoundation.org/en/2017/07/the-worlds-population-consumes-1-million-plastic-bottles-every-minute/, last accessed on July 28, 2020).
5 LeBlance, R. Recycling polyethylene terephthalate (https://www.thebalancesmb.com/recycling-polyethylene-terephthalate-pet-2877869, last accessed on July 12, 2020).
6 Mahapatra, N. N. Processing of recycled polyester fiber in textile industries. Textiles and environment. 2015, pp. 88-90.
7 Paben, J. Napcor: PET bottle recycling rate remains near 29%
(https://resource-recycling.com/plastics/2019/12/18/napcor-pet-bottle-recycling-rate-remains-near-29/, last accessed on July 13, 2020).
8 Expert’s talk: The big decryption of waste bottles being reproduced into eco-friendly clothing
(https://r-paper.epa.gov.tw/EDMDetail.aspx?id=bd422891-d0f5-4b3b-9987-7894f25c0750, last accessed on July 13, 2020)
9 Tukker, A. Dedicated chemical recycling for specific plastics. Plastics waste: feedstock recycling, chemical recycling and incineration, 1997, pp. 17-19.
10 Paci, M.; La Mantia, F. P. Competition between degradation and chain extension during processing of reclaimed poly(ethylene terephthalate). Polym. Degrad. Stab. 1998, 61(3), 417–420.
11 Pazun, D.; Spychaj, T. Chemical recycling of poly(ethylene terephthalate). Ind. Eng. Chem. Res. 1997, 36(4), 1373-1383.
12 Baliga, S.; Wong, W. T. J. Depolymerization of poly(ethylene terephthalate) recycled from post-consumer soft-drink bottles. Polym. Sci., Part A: Polymer Chemmistry, 1989, 27(6), 2071-2082.
13 Collins, M. J.; Zeronian, S. H.; Marshall, M. L. Analysis of the molecular weight distributions of aminolyzed poly(ethylene terephthalate) by using gel permeation chromatography. J. Macromol. Sci., Chem. 1991, 28(8), 775-792.
14 Blackmon, K. P.; Fox, D. W.; Shafer, S. J. Process for converting PET scrap to diamide monomers. Eur. Patent 365,842, 1988.
15 Brown, G. E., Jr.; O’Brien, R. C. Method for recovering terephthalic acid and ethylene glycol from polyester materials. U.S. Patent 3,952,053, April 20, 1976.
16 Karayannidis, G. P.; Chatziavgoustis, A. P.; Achilas, D. S. Poly(ethylene terephthalate) recycling and recovery of pure terephthalic acid by alkaline hydrolysis. Adv. Polym. Tech. 2002, 21(4), 250-259.
17 Ravichandran, S. A.; Rajan, V. P.; Aravind, P. V.; Seenivasan, A.; Prakash, D. G.; Ramakrishnan, K. Characterization of Terephthalic Acid Monomer Recycled from Post-Consumer PET Polymer Bottles. Macromol. Symp. 2016, 361(1), 30-33.
18 Wu, S. C.; Cheng, Z. M.; Wang, S. D.; Shan, X. L. Recovery of terephthalic acid from alkali reduction wastewater by cooling crystallization. Chem. Eng. Technol. 2011, 34(10), 1614–1618.
19 Chaonan, L.; Jihua, C. The study of the recovery of highly purified terephthalic acid from alkali weight-reduction wastewater. Int. J. Environment and Pollution, 2007, 29(4), 484-494.
20 Scheirs, J. Polymer recycling. Wiley Series in Polymer Science. Sussex: Wiley. 1998, pp 119-182.
21 Śledź, M.; Janczak, J.; Kubiak, R. New crystalline modification of terephthalic acid. Journal of Molecular Structure, 2001, 595(1-3), 77–82.
22 Saska, M.; Myerson, A. S. Crystal aging and crystal habit of terephthalic acid. AIChE Journal, 1987, 33(5), 848–852.
23 Datye, K. V.; Raje, H. M.; Sharma, N. D. Poly(ethylene terephthalate) waste and its utilization: a review. Resour. Conserv. 1984, 11, 136.
24 Brandt, M. J.; Johnson, K. M.; Elphinston, A. J.; Ratnayaka, D. D. Chemical storage, dosing and control. Twort’s Water Supply, 2017, pp 513–552.
25 Wong, D. C. Y.; Jaworski, Z.; Nienow, A. W. Effect of ion excess on particle size and morphology during barium sulphate precipitation: an experimental study. Chem. Eng. Sci. 2001, 56(3), 727–734.
26 Wong, D. C. Y.; Jaworski, Z.; Nienow, A. W. Barium Sulphate Precipitation in a Double-Feed Semi-Batch Stirred Reactor. Chem Eng Res Des, 2003, 81(8), 874–880.
27 McCabe, W. L.; Smith, J. L.; Harriott, P. Unit operations of chemical engineering. 7th Ed.; McGraw-Hill, New York, 2005; Chapter 29, p 1021.
28 Smith, P. G. Mixing and separation. Introduction to food process engineering. 2011, pp 397-434.
29 Endo, Y.; Alonso, M. Physical Meaning of specific cake resistance and effects of cake properties in compressible cake filtration. Filtr Separat, 2001, 38(7), 42–46.
30 Dittman, F. W. How to classify drying process, Chem. Eng. 1977, 84(2), 106-108
31 Lee, T.; Kuo, C. S.; Chen, Y. H. Solubility, polymorphism, crystallinity, and crystal habit of acetaminophen and ibuprofen by initial solvent screening. Pharm. Tech. 2006, 30(10), 72-92.

Chapter 2
1 Lee, T.; Kuo, C. S.; Chen, Y. H. Solubility, polymorphism, crystallinity, and crystal habit of acetaminophen and ibuprofen by initial solvent screening. Pharm. Tech. 2006, 30(10), 72-92.
2 Anderson, N. G. Practical Process Research and Development (academic press, New York, NY, 2000), pp.81-111.
3 Dasan, K. P. PET Nanocomposites: Preparation and Characterization. In Poly(ethylene Terephthalate) Based Blends, Composites and Nanocomposites, 2015, pp 99-111
4 Karayannidis, G. P.; Chatziavgoustis, A. P.; Achilas, D. S. Poly(ethylene terephthalate) recycling and recovery of pure terephthalic acid by alkaline hydrolysis. Adv. Polym. Tech. 2002, 21(4), 250-259.
5 Kim, S.; Lotz, B.; Lindrud, M.; Girard, K.; Moore, T.; Nagarajan, K.; Alvarez, M.; Lee, T.; Nikfar, F.; Davidovich, M.; Srivastava, S.; Kiang, S. Control of the particle properties of a drug substance by crystallization engineering and the effect on drug production formulation. Org. Process. Res. Dev. 2005, 9(6), 894-901.
6 Lee, T.; Chang, Y. H.; Lee, H. L. Crystallization process development of metal-organic frameworks by linking secondary building units, lattice nucleation and luminescence: insight into reproducibility. CrystEngComm 2017, 19 (3), 426-441.
7 Lee, T.; Lin, H. Y.; Lee, H. L. Engineering reaction and crystallization and the impact on filtration, drying, and dissolution behaviors: the study of acetaminophen (paracetamol) by in-process controls. Org. Process Res. Dev. 2013, 17(9), 1168-1178.

Chapter 3
1 Pazun, D.; Spychaj, T. Chemical recycling of poly(ethylene terephthalate). Ind. Eng. Chem. Res. 1997, 36(4), 1373-1383.
2 Karayannidis, G. P.; Chatziavgoustis, A. P.; Achilas, D. S. Poly(ethylene terephthalate) recycling and recovery of pure terephthalic acid by alkaline hydrolysis. Adv. Polym. Tech. 2002, 21(4), 250-259.
3 Paszun, D.; Spychaj, T. Chemical Recycling of Poly(ethylene terephthalate). Ind. Eng. Chem. Res. 1997, 36 (4), 1373-1383.
4 Mancini, S. D.; Schwartzman, J. A. S.; Nogueira, A. R.; Kagohara, D. A.; Zanin, M. Additional Steps in Mechanical Recycling of PET. J. Clean. Prod. 2010, 18 (1), 92-100.
5 Lee, T.; Kuo, C. S.; Chen, Y. H. Solubility, polymorphism, crystallinity, and crystal habit of acetaminophen and ibuprofen by initial solvent screening. Pharm. Tech. 2006, 30(10), 72-92.
6 Kim, S.; Lotz, B.; Lindrud, M.; Girard, K.; Moore, T.; Nagarajan, K.; Alvarez, M.; Lee, T.; Nikfar, F.; Davidovich, M.; Srivastava, S.; Kiang, S. Control of the particle properties of a drug substance by crystallization engineering and the effect on drug product formulation. Org. Proc. Res. Dev. 2005, 9 (6), 894-901.
7 Davey, R. J.; Maginn, S. J.; Andrews, S. J.; Black, S. N.; Buckley, A. M.; Cottier, D.; Dempsey, P.; Plowman, R.; Rout, J. E.; Stanley, D. R.; Taylor, A. Morphology and Polymorphism of Terephthalic Acid. Molecular Crystals and Liquid Crystals Science and Technology. Section A. Molecular Crystals and Liquid Crystals, 1994, 242(1), 79–90.
8 McCabe, W. L.; Smith, J. L.; Harriott, P. Unit operations of chemical engineering. 7th Ed.; McGraw-Hill, New York, 2005; Chapter 29, p 1021.
9 Varghese, H. T.; Panicker, C. Y.; Philip, D.; Sreevalsan, K.; Anithakumary, V. IR, Raman and SERS Spectra of Disodium Terephthalate. Spectrochim. Acta A 2007, 68 (3), 817-822.
10 Téllez, C. A.; Hollauer, E.; Mondragon, M. A.; Castaño, V. M. Fourier Transform Infrared and Raman Spectra, Vibrational Assignment and Ab Initio Calculations of Terephthalic Acid and Related Compounds. Spectrochim. Acta A 2001, 57 (5), 993-1007.
11 Colthup, N. B.; Daly, L. H.; Wiberley, S. E. Introduction to Infrared and Raman Spectroscopy, 3rd ed.; New York: Academic Press, Inc., 1990; 313-318.

指導教授

李度(Tu Lee)

審核日期

2020-7-29

推文