參考文獻 |
參考文獻
〔1〕R. Ding, L. Qi, M. Jia and H. Wang, Facile synthesis of mesoporous spinel NiCo2O4 nanostructures as highly efficient electrocatalysts for urea electro-oxidation, Nanoscale, (2014), 6, 1369-1376.
〔2〕R. Lan, S. Tao and J. T. S. Irvine, A direct urea fuel cell – power from fertiliser and waste, Energy Environ. Sci., (2010), 3, 438–441.
〔3〕D. Wang, W. Yan and G. G. Botte, Exfoliated nickel hydroxide nanosheets for urea electrolysis, Electrochem. Commun, (2011), 13, 1135–1138.
〔4〕C. Bao, Q. Niu, Z. A. Chen etal, Ultrathin nickel-metal–organic framework nanobelt based electrochemical sensor for the determination of urea in human body fluids, RSC Advances, (2019), 9, 29474-29481.
〔5〕T. W. Chou, L. Gao, E. T. Thostenson, Z. Zhang and J. H. Byun, An assessment of the science and technology of carbon nanotube-based fibers and Composites, Compos. Sci. Technol., (2010), 70, 1-19.
〔6〕S. Rahmanian, K. S. Thean, A. R. Suraya, M. A. Shazed, M. A. Mohd Salleh and H. M. Yusoff, Carbon and glass hierarchical fibers: Influence of carbon nanotubes on tensile, flexural and impact properties of short fiber reinforced composites, Materials Design, (2013), 43, 10-16.
〔7〕Y. Kong, T. Qiu and J. Qiu, Fabrication of novel micro–nano carbonous composites based on self-made hollow activated carbon fibers, Appl. Surf. Sci., (2013), 265, 352-357.
〔8〕H. Qian, A. Bismarck, E. S. Greenhalgh and M. S. P. Shaffer, Carbon nanotube grafted carbon fibres: A study of wetting and fibre fragmentation, Compos. Part A Appl., Sci. Manuf., (2010), 41, 1107-1114.
〔9〕A. G. Osorio and C. P. Bergmann, Effect of surface area of substrates aiming the optimization of carbon nanotube production from ferrocene, Appl. Surf. Sci., (2013), 264, 794- 800.
〔10〕K. Rana, G. Kucukayan Dogu and E. Bengu, Growth of vertically aligned carbon nanotubes over self-ordered nano-porous alumina films and their surface properties, Appl. Surf. Sci., (2012), 258, 7112-7117.
〔11〕W. Xia, J. H. Johannes, H. Bitter, D. Su, J. Qian and M. Muhler, Iron impregnation on the amorphous shell of vapor grown carbon fibers and the catalytic growth of secondary nanofibers, Diam. Relat. Mater., (2009), 18, 13-19.
〔12〕P. Agnihotri, S. Basu and K. K. Kar, Effect of carbon nanotube length and density on the properties of carbon nanotube-coated carbon fiber/polyester composites, Carbon, (2011), 49, 3098-3106.
〔13〕T. Takasaki, K. Nishimura, T. Mukai, T. Iwaki, K. Tsutsumi and T. Sakai, Fiber-Type Ni(OH)2 Electrode for Nickel-Metal Hydride Battery: Super High-Rate Charge/Discharge and Long Cycle-Life Performances, J. Electrochem. Soc., (2012), 159, A1891-A1896.
〔14〕T. Takasaki, K. Nishimura, T. Mukai, T. Iwaki, K. Tsutsumi and T. Sakai, Fiber-Type Ni(OH)2 Electrode with α/γ Phase Transformation: High-Capacity and High-Voltage Performances of Nickel-Metal Hydride Battery, J. Electrochem. Soc., (2013), 160, A564 A568.
〔15〕J. Yao, K. Nishimura, T. Mukai et al, Development of Binder Free Fiber-Type Li-Ni-Mn-O Cathode with High-Voltage Stability for Lithium-Ion Battery, ECS Electrochem. Lett., (2012), 1, A83-A86.
〔16〕J. Yao, T. Takasaki, K. Nishimura et al, Electrochemistry, X-ray Diffraction Characterization and Battery Performances of Fiber-type Li-Mn-O Electrode for Li-ion Battery , (2014), 82 2, 109-112.
〔17〕J. Yao, T. Takasaki, K. Nishimura et al, J. Electrochem. Soc., (2013), 160, A980-A 984.
〔18〕Y. H. Liu, T. Takasaki, K. Nishimura et al, Development of lithium ion battery using fiber-type lithium-rich cathode and carbon anode materials, J. Power Sources, (2015), 290, 153-158.
〔19〕Y. H. Liu, T. Takasaki, K. Nishimura et al, Preparation of Fiber-Type Cathode and Its Electrode Characteristics for Sodium Ion Battery, J. Electrochem. Soc., (2014), 161, A1194-A1199.
〔20〕Y. H. Liu, T. Takasaki, K. Nishimura, et al, Electrode Performance and Structural Characterization of Fiber-Type Cathode for Sodium Ion Battery, J. Electrochem. Soc., (2014), 161, A2054-A2059.
〔21〕Y. H. Liu, H. H. Lin and Y. J. Tai, Binder-free carbon fiber-based lithium-nickel-manganese-oxide composite cathode with improved electrochemical stability against high voltage: Effects of composition on electrode performance, J Alloys Compd., (2018), 735, 580-587.
〔22〕G. G. Botte, US Patent, (2009) Application No. 0095636 A1.
〔23〕D. A. Daramola, D. Singh and G. G. Botte, Dissociation Rates of Urea in the Presence of NiOOH Catalyst: A DFT Analysis, J. Phys. Chem. A, (2010), 114, 11513-11521.
〔24〕R. L. King and G. G. Botte, Investigation of multi-metal catalysts for stable hydrogen production via urea electrolysis, J. Power Sources, (2011), 196, 9579-9584.
〔25〕A. T. Miller, B. L. Hassler and G. G. Botte, Rhodium electrodeposition on nickel electrodes used for urea electrolysis, J. Appl. Electrochem., (2012), 42, 925-934.
〔26〕W. Y an, D. Wang and G. G. Botte, Electrochemical decomposition of urea with Ni-based catalysts, Appl. Catal. B: Environ., (2012), 127, 221-226.
〔27〕D. Wang, W. Yan, S. H. Vijapur and G. G. Botte, Enhanced electrocatalytic oxidation of urea based on nickel hydroxide nanoribbons, J. Power Sources , (2012), 217, 498-502.
〔28〕V. Vedharathinam and G. G. Botte, Direct evidence of the mechanism for the electro-oxidation of urea on Ni(OH)2 catalyst in alkaline medium, Electrochim. Acta, (2013), 108 660-665.
〔29〕M. A. Abdelkareem, Y. A. Haj, M. Alajami etal, Ni-Cd carbon nanofibers as an effective catalyst for urea fuel cell, J. Environ. Chem. Eng. , (2018), 6, 332-337.
〔30〕Y. Tong, P. Chen,M. Zhang, Oxygen Vacancies Confined in Nickel Molybdenum Oxide Porous Nanosheets for Promoted Electrocatalytic Urea Oxidation, ACS Catal., (2018), 8, 1−7.
〔31〕M. Wu, J. Xu, Nickel-cobalt oxide nanocages derived from cobalt-organic frameworks as electrode materials for electrochemical energy storage with redox electrolyte, Electrochim Acta, (2019), 319, 31-40.
〔32〕E. Sum, M. Skyllas-Kazacos, A study of the V(II)/V(III) Redox Couple for Redox flow Cell applications, Journal of Power Sources, (1985), 15, 179-190.
〔33〕S. Eibl, Observing Inhomogeneity of Plastic Components in Carbon Fiber Reinforced Polymer Materials by ATR-FTIR Spectroscopy in the Micrometer Scale, J. Compos. Mater.,(2008), 12, 1231-1246.
〔34〕L. Yao, M. Li, Q. Wu et al, Comparison of sizing effect of T700 grade carbon fiber on interfacial properties of fiber/BMI and fiber/epoxy, Appl. Surf. Sci,, (2012), 326-333.
〔35〕C.L. Chiang, C.C. M. Ma, Synthesis, characterization and thermal properties of novel epoxy containing silicon and phosphorus nanocomposites by sol–gel method, Eur. Polym.J., (2002), 38, 2219~2224.
〔36〕Y. C. Chiang, W.H. Lin, Y. C Chang, The influence of treatment duration on multi-walled carbon nanotubes functionalized by H2SO4/HNO3 oxidation, Appl. Surf. Sci., (2011), 6, 2401-2410.
〔37〕A. G. Osorio, I. C. L. Silveira, V. L. Bueno, C. P. Bergmann, Appl. Surf. Sci., (2008), 5, 2485-2489.
〔38〕A. Pistone, C. Milone,, E. Piperopoulos et al, H2SO4/HNO3/HCl—Functionalization and its effect on dispersion of carbon nanotubes in aqueous media, J. Exp Nanosci, (2012), 6, 5054-5060.
〔39〕A. C. Ferrari, J. C. Meyer, V. Scardaci, C. Casiraghi, et al, Raman Spectrum of Graphene and Graphene Layers, Phys. Rev. Lett, (2006), 97, 187401.
〔40〕D. Yoon, H. Moon, Y. W. Son et al, Interference effect on Raman spectrum of graphene on SiO2 /Si, Phys. Rev. B, (2009), 80, 125422.
〔41〕I. Calizo, D. Teweldebrhan, W. Bao etal, Spectroscopic raman nanometrology of graphene and graphene multilayers on arbitrary Substrates, J. Phys. Conf. Ser., (2008), 109, 1-4.
〔42〕C. Lin, Z. Gao, F. Zhang, J. Yang, B. Liu, J. Jin, In-situ Growth of Single-Layered α-Ni(OH)2 Nanosheets on Carbon Cloth for High-Efficient Electrocatalytic Urea Oxidation, J. Mater. Chem. A, (2018), 6, 13867-13873.
〔43〕H. Fang, S. Zhang, One-Step Synthesis of Ni/Ni(OH)2@Multiwalled Carbon Nanotube Coaxial Nanocable Film For High Performance Supercapacitors, Electrochim Acta, (2014), 125, 427–434.
〔44〕M. S. Wu, R. Y. Ji, Y. R. Zheng, Nickel hydroxide electrode with a monolayer of nanocup arrays as an effective electrocatalyst for enhanced electrolysis of urea, Electrochim. Acta, (2014), 20, 194-199.
〔45〕J. Zhao, J. Chen, S. Xu et al, Hierarchical NiMn Layered Double Hydroxide/Carbon Nanotubes Architecture with Superb Energy Density for Flexible Supercapacitors , Adv. Funct. Mater., (2014), 20, 2938-2946.
〔46〕M. Aghazadeh, M. Ghaemi, B. Sabour, S. Dalvand, Electrochemical preparation of α-Ni(OH)2 ultrafine nanoparticles for high-performance supercapacitors, J. Electrochem. Soc, (2014), 18, 1569–1584.
〔47〕P. M. Hannula, J. Aromaa, B. P. Wilson, D. Janas , K. Koziol, Observations of copper deposition on functionalized carbon nanotube films, Electrochim. Acta, (2017), 232, 495-504.
〔48〕A. Delahaye-vidal, M. Figlarz, Textural and structural studies on nickel hydroxide electrodes. II. Turbostratic nickel (II) hydroxide submitted to electrochemical redox cycling, J. Appl Electrochem., (1987), 17, 589-599.
〔49〕D. S. Hall, D. J. Lockwood, C. Bock and B. R. MacDougall, Nickel hydroxides and related materials: a review of their structures, synthesis and properties, Proc.R. Soc. A. Math. Phys. Eng. Sci., (2014), 471, 857–792.
〔50〕Michael Rajamathi,a P. Vishnu Kamatha and Ram Seshadrib, Polymorphism in nickel hydroxide: role of interstratification, J. Mater. Chem., (2000), 10, 503-506.
〔51〕J. L. Bantignies,, S. Deabate,, A. Righi, S. Rols, et al, New Insight into the Vibrational Behavior of Nickel Hydroxide and Oxyhydroxide Using Inelastic Neutron Scattering, Far/Mid-Infrared and Raman Spectroscopies, J. Phys. Chem. C, (2008), 112, 2193-2201.
〔52〕D. S. Hall,, D. J. Lockwood, S. Poirier et al, Raman and Infrared Spectroscopy of α and β Phases of Thin Nickel Hydroxide Films Electrochemically Formed on Nickel, J. Phys. Chem. A, (2012), 116, 6771–6784.
〔53〕D. S. Hall,, D. J. Lockwood, S. Poirier et al, Applications of in Situ Raman Spectroscopy for Identifying Nickel Hydroxide Materials and Surface Layers during Chemical Aging, ACS Appl. Mater.Interfaces, (2014), 5, 3141-3149.
〔54〕M. S. Wu, G. W. Lin and R. S. Yang, J. Power Sources, Hydrothermal growth of vertically-aligned ordered mesoporous nickel oxide nanosheets on three-dimensional nickel framework for electrocatalytic oxidation of urea in alkaline medium, (2014), 272, 711-718.
〔55〕J. Zhang, H. Zou, Q. Qing et al, Effect of Chemical Oxidation on the Structure of Single-Walled Carbon Nanotubes, J. Phys. Chem., (2003), 107, 3712–3718.
〔56〕D. Liu ,T. Liu, L. Zhang et al, High-performance urea electrolysis toward less energy-intensive electrochemcial hydrogen production using a bifunctional catalyst electrode, J. Mater. Chem. A, (2017), 5, 3208-3213.
〔57〕R. L. King and G. G. Botte, Investigation of multi-metal catalysts for stable hydrogen production via urea electrolysis, J. Power Sources, (2011), 196, 9579- 9584.
〔58〕B. K. Boggs, R. L. King and G. G. Botte, Urea electrolysis: direct hydrogen production from urine, Chem. Commun., (2009), 32, 4859-4861.
〔59〕D. Liu, T. Liu, L. Zhang, et al, High-performance urea electrolysis toward less energy-intensive electrochemcial hydrogen production using a bifunctional catalyst electrode, J. Mater. Chem. A, (2013), 5, 3208-3213.
〔60〕L. Bian, Q. Du, M. Luo etal, Monodisperse nickel nanoparticles supported on multi-walls carbon nanotubes as an effective catalyst for the electro-oxidation of urea, Int. J. Hydrog. Energy, 42, (2017), 25244-25250.
〔61〕G. Madhurambal, M. Mariappan, S. C. Mojumdar, TG–DTA, UV and FTIR spectroscopic studies of urea–thiourea mixed crystal, J Therm Anal Calorim, (2010), 100, 853–856.
〔62〕R. A. Abdel Hameed and S. S. Medany, Enhanced electrocatalytic activity of NiO nanoparticles supported on graphite planes towards urea electro-oxidation in NaOH solution, Int. J. Hydrogen Energy, (2017), 42, 24117-24130.
〔63〕Y. P. Chen, B. Liu, H. T. Lian, Preparation and Application of Urea Electrochemical Sensor Based on Chitosan Molecularly Imprinted Films, Electroanalysis, (2011), 23, 1454–1461. |