參考文獻 |
[1] A. Choudhury, H. Chandra, A. Arora, Application of solid oxide fuel cell technology for power generation - A review, Renewable and Sustainable Energy Reviews 20 (2013) 430-442 (https://doi.org/10.1016/j.rser.2012.11.031).
[2] Q. Ma, J. Ma, S. Zhou, R. Yan, J. Gao, G. Meng, A high-performance ammonia-fueled SOFC based on a YSZ thin-film electrolyte, Journal of Power Sources 164 (2007) 86-89 (https://doi.org/10.1016/j.jpowsour.2006.09.093).
[3] M.J. Taherzadeh, K. Bolton, J. Wong, A. Pandey, Sustainable Resource Recovery and Zero Waste Approaches, Elsevier Science, 2019.
[4] C.C. Liu, S.S. Shy, C.W. Chiu, M.W. Peng, H.J. Chung, Hydrogen/carbon monoxide syngas burning rates measurements in high-pressure quiescent and turbulent environment, International Journal of Hydrogen Energy 36 (2011) 8595-8603 (https://doi.org/10.1016/j.ijhydene.2011.04.087).
[5] T. Chen, W.G. Wang, H. Miao, T. Li, C. Xu, Evaluation of carbon deposition behavior on the nickel/yttrium-stabilized zirconia anode-supported fuel cell fueled with simulated syngas, Journal of Power Sources 196 (2011) 2461-2468 (https://doi.org/10.1016/j.jpowsour.2010.11.095).
[6] 張華屹,合成氣固態氧化物燃料電池性能與穩定性量測,國立中央大學碩士論文,桃園,台灣,2017。
[7] R.J. Kee, H. Zhu, A.M. Sukeshini, G.S. Jackson, Solid oxide fuel cells: operating principles, current challenges, and the role of syngas, Combustion Science and Technology 180 (2008) 1207-1244 (https://doi.org/10.1080/00102200801963458).
[8] 鄭浩昇,加壓型固態氧化物燃料電池量測與分析:壓力、溫度與質量流率效應,國立中央大學碩士論文,桃園,台灣,2012。
[9] 謝易達,加壓型SOFC陽極支撐與電解質支撐單電池堆量測與分析,國立中央大學碩士論文,桃園,台灣,2013。
[10] F. Ramadhani, M.A. Hussain, H. Mokhlis, S. Hajimolana, Optimization strategies for solid oxide fuel cell (SOFC) application: A literature survey, Renewable and Sustainable Energy Reviews 76 (2017) 460-484
(https://doi.org/10.1016/j.rser.2017.03.052).
[11] Y. Kobayashi, K. Tomida, M. Nishiura, K. Hiwatashi, H. Kishizawa, K. Takemobu, Development of next-generation large-scale SOFC toward realization of a hydrogen society, Mitsubishi Heavy Industries Technical Review 52 (2015) 111-116 (https://doi.org/10.1299/jsmemecj.2015._S0830303-).
[12] R.O. Hayre, S.W. Cha , W. Colella, F.B. Prinz, Fuel Cell Fundamentals, 2nd Ed. John Wiley & Sons Inc., New York, 2009.
[13] N.T.Q. Nguyen, H.H. Yoon, Preparation and evaluation of BaZr0.1Ce0.7Y0.1Yb0.1O3−δ (BZCYYb) electrolyte and BZCYYb-based solid oxide fuel cells, Journal of Power Sources 231 (2013) 213-218 (https://doi.org/10.1016/j.jpowsour.2013.01.011).
[14] M. Liu, M.E. Lynch, K. Blinn, F.M. Alamgir, Y. Choi, Rational SOFC material design: new advances and tools, Materials Today 14 (2011) 534-546 (https://doi.org/10.1016/S1369-7021(11)70279-6).
[15] Y.W. Sin, K. Galloway, B. Roy, N.M. Sammes, J.H. Song, T. Suzuki, M. Awano, The properties and performance of micro-tubular (less than 2.0 mm O.D.) anode suported solid oxide fuel cell (SOFC), International Journal of Hydrogen Energy 36 (2011) 1882-1889 (https://doi.org/10.1016/j.ijhydene.2009.12.167).
[16] A. Mineshige, K. Fukushima, K. Tsukada, M. Kobune, T. Yazawa, K. Kikuchi, M. Inaba, Z. Ogumi, Preparation of dense electrolyte layer using dissociated oxygen electrochemical vapor deposition technique, Solid State Ionics 175 (2004) 483-485 (https://doi.org/10.1016/j.ssi.2004.03.050).
[17] D. Cui, L. Liu, Y. Dong, M. Cheng, Comparison of different current collecting modes of anode supported micro-tubular SOFC through mathematical modeling, Journal of Power Sources 174 (2007) 246-254
(https://doi.org/10.1016/j.jpowsour.2007.08.094).
[18] B. Stoeckl, V. Subotić, D. Reichholf, H. Schroettner, C. Hochenauer, Extensive analysis of large planar SOFC: Operation with humidified methane and carbon monoxide to examine carbon deposition based degradation, Electrochimica Acta 256 (2017) 325-336 (https://doi.org/10.1016/j.electacta.2017.09.026).
[19] M.M. Hussain, X. Li, I. Dincer, A general electrolyte–electrode-assembly model for the performance characteristics of planar anode-supported solid oxide fuel cells, Journal of Power Sources 189 (2009) 916-928
(https://doi.org/10.1016/j.jpowsour.2008.12.121).
[20] D. Sarantaridis, A. Atkinson, Redox cycling of Ni-based solid oxide fuel cell anodes: A review, Fuel Cells 7 (2007) 246-258
(https://doi.org/10.1002/fuce.200600028).
[21] Y. Patcharavorachot, A. Arpornwichanop, A. Chuachuensuk, Electrochemical study of a planar solid oxide fuel cell: Role of support structures, Journal of Power Sources 177 (2008) 254-261 (https://doi.org/10.1016/j.jpowsour.2007.11.079).
[22] W. Vielstich, A. Lamm, H.A. Gasteiger, H. Yokokawa, Handbook of Fuel Cells, John Wiley & Sons Inc., 2010.
[23] 李信宏,棋盤式雙極板尺寸流道效應對固態氧化物燃料電池性能之影響,國立中央大學碩士論文,桃園,台灣,2010。
[24] S.H. Chan, K.A. Khor, Z.T. Xia, A complete polarization model of a solid oxide fuel cell and its sensitivity to the change of cell component thickness, Journal of Power Sources 93 (2001) 130-140 (https://doi.org/10.1016/S0378-7753(00)00556-5).
[25] M. Ni, M.K. Leung, D.Y. Leung, Parametric study of solid oxide fuel cell performance, Energy Conversion and Management 48 (2007) 1525-1535 (https://doi.org/10.1016/j.enconman.2006.11.016).
[26] G.J. Offer, P. Shearing, J.I. Golbert, D.J.L. Brett, A. Atkinson, N.P. Brandon, Using electrochemical impedance spectroscopy to compensate for errors when measuring polarisation curves during three-electrode measurements of solid oxide fuel cell electrodes, Electrochimica Acta 53 (2008) 7614-7621 (https://doi.org/10.1016/j.electacta.2008.04.001).
[27] D.D. Macdonald, Reflections on the history of electrochemical impedance spectroscopy, Electrochimica Acta 51 (2006) 1376-1388
(https://doi.org/10.1016/j.electacta.2005.02.107).
[28] Q.A. Huang, R. Hui, B.W. Wang, H.J. Zhang, A review of AC impedance modeling and validation in SOFC diagnosis, Electrochimica Acta 52 (2007) 8144-8164 (https://doi.org/10.1016/j.electacta.2007.05.071).
[29] R. Barfod, M. Mogensen, T. Klemensø, A. Hagen, Y.L. Liu, P.V. Hendriksen, Detailed characterization of anode-supported SOFCs by impedance spectroscopy, Journal of the Electrochemical Society 154 (2007) B371-B378 (https://iopscience.iop.org/article/10.1149/200507.0524PV).
[30] V.A. Restrepo, J.M. Hill, Carbon deposition on Ni/YSZ anodes exposed to CO/H2 feeds, Journal of Power Sources 195 (2010) 1344-1351
(https://doi.org/10.1016/j.jpowsour.2009.09.014).
[31] J. Xizo, Y. Xie, J. Liu, M. Liu, Deactivation of nickel-based anode in solid oxide fuel cells operated on carbon-containing fuels, Journal of Power Sources 268 (2014) 508-516 (https://doi.org/10.1016/j.jpowsour.2014.06.082).
[32] C. Li, Y. Shi, N. Cai, Elementary reaction kinetic model of an anode-supported solid oxide fuel cell fueled with syngas, Journal of Power Sources 195 (2010) 2266-2282 (https://doi.org/10.1016/j.jpowsour.2009.10.051).
[33] B. Stoeckl, V. Subotić, M. Preininger, H. Schroettner, C. Hochenauer, SOFC operation with carbon oxides: Experimental analysis of performance and degradation, Electrochimica Acta 275 (2018) 256-264
(https://doi.org/10.1016/j.electacta.2018.04.036).
[34] L.Z. Bian, Z.Y. Chen, L.J. Wang, F.S. Li, K.C. Chou, Electrochemical performance and carbon deposition of anode-supported solid oxide fuel cell exposed to H2-CO fuels, International Journal of Hydrogen Energy 42 (2017) 14246-14252 (https://doi.org/10.1016/j.ijhydene.2016.08.214).
[35] H. Miao, G. Liu, T. Chen, C. He, J. Peng, S. Ye, W.G. Wang, Behavior of anode-supported SOFCs under simulated syngases, Journal of Solid State Electrochemistry 19 (2014) 639-646
(https://link.springer.com/article/10.1007/s10008-014-2640-7).
[36] W. Wang, R. Ran, C. Su, Y.M. Guo, D. Farrusseng, Z.P. Shao, Ammonia-mediated suppression of coke formation in direct-methane solid oxide fuel cells with nickel-based anodes, Journal of Power Sources 240 (2013) 232-240 (https://doi.org/10.1016/j.jpowsour.2013.04.014).
[37] R. Suwanwarangkul, E. Croiset, E. Entchev, S. Charojrochkul, M.D. Pritzker, M.W. Fowler, P.L. Douglas, S. Chewathanakup, H. Mahaudom, Experimental and modeling study of solid oxide fuel cell operating with syngas fuel, Journal of Power Sources 161 (2006) 308-322
(https://doi.org/10.1016/j.jpowsour.2006.03.080).
[38] X.F. Ye, S.R. Wang, J. Zhou, F.R. Zeng, H.W. Nie, T.L. Wen, Assessment of the performance of Ni-yttria-stabilized zirconia anodes in anode-supported Solid Oxide Fuel Cells operating on H2-CO syngas fuels, Journal of Power Sources 195 (2010) 7264-7267 (https://doi.org/10.1016/j.jpowsour.2010.04.016).
[39] 周政憲, 平板式加壓型合成氣固態氧化物燃料電池實驗研究,國立中央大學碩士論文,桃園,台灣,2018。
[40] P.C. Wu, S.S. Shy, Cell performance, impedance, and various resistances measurements of an anode-supported button cell using a new pressurized solid oxide fuel cell rig at 1-5 atm and 750-850°C, Journal of Power Sources 362 (2017) 105-114 (https://doi.org/10.1016/j.jpowsour.2017.07.030).
[41] V.A.C. Haanappel, M.J. Smith, A review of standardising SOFC measurement and quality assurance at FZJ, Journal of Power Sources 171 (2007) 169-178 (https://doi.org/10.1016/j.jpowsour.2006.12.029).
[42] J. Nielsen, M. Mogensen, SOFC LSM: YSZ cathode degradation induced by moisture: An impedance spectroscopy study, Solid State Ionics 189 (2011) 74-81 (https://doi.org/10.1016/j.ssi.2011.02.019).
[43] Z. Jaworski, B. Zakrzewska, P. Pianko-Oprych, On thermodynamic equilibrium of carbon deposition from gaseous C-H-O mixtures: updating for nanotubes, Reviews in Chemical Engineering 33 (2017) 217-235
(https://doi.org/10.1515/revce-2016-0022). |