參考文獻 |
1. Armand, M. and J.-M. Tarascon, "Building better batteries". nature, Vol. 451, no. 7179, pp. 652-657, 2008.
2. Shen, X., et al., "Beyond lithium ion batteries: higher energy density battery systems based on lithium metal anodes". Energy Storage Materials, Vol. 12, pp. 161-175, 2018.
3. Ismail, M., et al., "A survey on green mobile networking: From the perspectives of network operators and mobile users". IEEE Communications Surveys & Tutorials, Vol. 17, no. 3, pp. 1535-1556, 2014.
4. https://learnenergy.tw/index.php?inter=teachers&id=67&did=29.
5. https://www.taipower.com.tw/tc/index.aspx.
6. Etacheri, V., et al., "Challenges in the development of advanced Li-ion batteries: a review". Energy & Environmental Science, Vol. 4, no. 9, pp. 3243-3262, 2011.
7. Lu, L., et al., "A review on the key issues for lithium-ion battery management in electric vehicles". Journal of power sources, Vol. 226, pp. 272-288, 2013.
8. Winter, M. and R.J. Brodd, "What are batteries, fuel cells, and supercapacitors?". Chemical reviews, Vol. 104, no. 10, pp. 4245-4270, 2004.
9. Wu, F., J. Maier, and Y. Yu, "Guidelines and trends for next-generation rechargeable lithium and lithium-ion batteries". Chemical Society Reviews, Vol. 49, no. 5, pp. 1569-1614, 2020.
10. Cheng, X.B., et al., "Dendrite‐free lithium deposition induced by uniformly distributed lithium ions for efficient lithium metal batteries". Advanced materials, Vol. 28, no. 15, pp. 2888-2895, 2016.
11. Ding, F., et al., "Dendrite-free lithium deposition via self-healing electrostatic shield mechanism". Journal of the American Chemical Society, Vol. 135, no. 11, pp. 4450-4456, 2013.
12. Cheng, X.-B., et al., "Nanodiamonds suppress the growth of lithium dendrites". Nature communications, Vol. 8, no. 1, pp. 1-9, 2017.
13. Goodenough, J.B. and Y. Kim, "Challenges for rechargeable Li batteries". Chemistry of materials, Vol. 22, no. 3, pp. 587-603, 2010.
14. Liu, B., J.-G. Zhang, and W. Xu, "Advancing lithium metal batteries". Joule, Vol. 2, no. 5, pp. 833-845, 2018.
15. Xu, R., et al., "Artificial interphases for highly stable lithium metal anode". Matter, Vol. 1, no. 2, pp. 317-344, 2019.
16. Wang, H., et al., "A binder-free high silicon content flexible anode for Li-ion batteries". Energy & Environmental Science, Vol. 13, no. 3, pp. 848-858, 2020.
17. Kim, J.M., et al., "Electrochemically exfoliated graphene as a novel microwave susceptor: the ultrafast microwave-assisted synthesis of carbon-coated silicon− graphene film as a lithium-ion battery anode". Nanoscale, Vol. 9, no. 40, pp. 15582-15590, 2017.
18. Tang, X., G. Wen, and Y. Song, "Stable silicon/3D porous N-doped graphene composite for lithium-ion battery anodes with self-assembly". Applied Surface Science, Vol. 436, pp. 398-404, 2018.
19. Zhang, Y., N. Du, and D. Yang, "Designing superior solid electrolyte interfaces on silicon anodes for high-performance lithium-ion batteries". Nanoscale, Vol. 11, no. 41, pp. 19086-19104, 2019.
20. Wei, C., et al., "Uniform Li deposition by regulating the initial nucleation barrier via a simple liquid-metal coating for a dendrite-free Li–metal anode". Journal of Materials Chemistry A, Vol. 7, no. 32, pp. 18861-18870, 2019.
21. Ye, L. and X. Li, "A dynamic stability design strategy for lithium metal solid state batteries". Nature, Vol. 593, no. 7858, pp. 218-222, 2021.
22. Liu, S., et al., "Crumpled graphene balls stabilized dendrite-free lithium metal anodes". Joule, Vol. 2, no. 1, pp. 184-193, 2018.
23. Cheng, X.-B., et al., "Toward safe lithium metal anode in rechargeable batteries: a review". Chemical reviews, Vol. 117, no. 15, pp. 10403-10473, 2017.
24. Zhang, R., et al., "Lithiophilic sites in doped graphene guide uniform lithium nucleation for dendrite‐free lithium metal anodes". Angewandte Chemie, Vol. 129, no. 27, pp. 7872-7876, 2017.
25. Yun, Q., et al., "Chemical dealloying derived 3D porous current collector for Li metal anodes". Advanced Materials, Vol. 28, no. 32, pp. 6932-6939, 2016.
26. Yang, C., et al., "Continuous plating/stripping behavior of solid-state lithium metal anode in a 3D ion-conductive framework". Proceedings of the National Academy of Sciences, Vol. 115, no. 15, pp. 3770-3775, 2018.
27. Kim, S., et al., "The Role of Interlayer Chemistry in Li‐Metal Growth through a Garnet‐Type Solid Electrolyte". Advanced Energy Materials, Vol. 10, no. 12, pp. 1903993, 2020.
28. Pande, V. and V. Viswanathan, "Computational screening of current collectors for enabling anode-free lithium metal batteries". ACS Energy Letters, Vol. 4, no. 12, pp. 2952-2959, 2019.
29. Li, C., et al., "Flexible artificial solid electrolyte interphase formed by 1, 3-dioxolane oxidation and polymerization for metallic lithium anodes". ACS applied materials & interfaces, Vol. 11, no. 2, pp. 2479-2489, 2018.
30. Xu, R., et al., "Artificial soft–rigid protective layer for dendrite‐free lithium metal anode". Advanced Functional Materials, Vol. 28, no. 8, pp. 1705838, 2018.
31. Shang, Y., et al., "Scalable Synthesis of LiF‐rich 3D Architected Li Metal Anode via Direct Lithium‐Fluoropolymer Pyrolysis to Enable Fast Li Cycling". Energy & Environmental Materials, Vol. 4, no. 2, pp. 213-221, 2021.
32. Xu, W., et al., "Lithium metal anodes for rechargeable batteries". Energy & Environmental Science, Vol. 7, no. 2, pp. 513-537, 2014.
33. Cheng, H., et al., "Trace fluorinated-carbon-nanotube-induced lithium dendrite elimination for high-performance lithium–oxygen cells". Nanoscale, Vol. 12, no. 5, pp. 3424-3434, 2020.
34. Xia, S., et al., "Highly Stable and Ultrahigh‐Rate Li Metal Anode Enabled by Fluorinated Carbon Fibers". Small, Vol. 17, no. 4, pp. 2006002, 2021.
35. Jiang, G., et al., "Robust Artificial Solid‐Electrolyte Interfaces with Biomimetic Ionic Channels for Dendrite‐Free Li Metal Anodes". Advanced Energy Materials, Vol. 11, no. 6, pp. 2003496, 2021.
36. Beyene, T.T., et al., "Concentrated dual-salt electrolyte to stabilize Li metal and increase cycle life of anode free Li-metal batteries". Journal of The Electrochemical Society, Vol. 166, no. 8, pp. A1501, 2019.
37. Wang, X., et al., "Stress-driven lithium dendrite growth mechanism and dendrite mitigation by electroplating on soft substrates". Nature Energy, Vol. 3, no. 3, pp. 227-235, 2018.
38. Liu, S., et al., "High interfacial-energy interphase promoting safe lithium metal batteries". Journal of the American Chemical Society, Vol. 142, no. 5, pp. 2438-2447, 2020.
39. Zhang, R., et al., "Conductive nanostructured scaffolds render low local current density to inhibit lithium dendrite growth". Advanced Materials, Vol. 28, no. 11, pp. 2155-2162, 2016.
40. Liu, W., et al., "Stabilizing lithium metal anodes by uniform Li-ion flux distribution in nanochannel confinement". Journal of the American Chemical Society, Vol. 138, no. 47, pp. 15443-15450, 2016.
41. Tu, Z., et al., "Stabilizing protic and aprotic liquid electrolytes at high-bandgap oxide interphases". Chemistry of Materials, Vol. 30, no. 16, pp. 5655-5662, 2018.
42. Bobnar, J., et al., "Fluorinated reduced graphene oxide as a protective layer on the metallic lithium for application in the high energy batteries". Scientific reports, Vol. 8, no. 1, pp. 1-10, 2018.
43. Cui, C., et al., "A highly reversible, dendrite‐free lithium metal anode enabled by a lithium‐fluoride‐enriched interphase". Advanced Materials, Vol. 32, no. 12, pp. 1906427, 2020.
44. Assegie, A.A., et al., "Multilayer-graphene-stabilized lithium deposition for anode-Free lithium-metal batteries". Nanoscale, Vol. 11, no. 6, pp. 2710-2720, 2019.
45. Assegie, A.A., et al., "Polyethylene oxide film coating enhances lithium cycling efficiency of an anode-free lithium-metal battery". Nanoscale, Vol. 10, no. 13, pp. 6125-6138, 2018.
46. Nilsson, V., et al., "Highly concentrated LiTFSI–EC electrolytes for lithium metal batteries". ACS Applied Energy Materials, Vol. 3, no. 1, pp. 200-207, 2019.
47. Wondimkun, Z.T., et al., "Binder-free ultra-thin graphene oxide as an artificial solid electrolyte interphase for anode-free rechargeable lithium metal batteries". Journal of Power Sources, Vol. 450, pp. 227589, 2020.
48. Novoselov, K.S., et al., "Electric field effect in atomically thin carbon films". science, Vol. 306, no. 5696, pp. 666-669, 2004.
49. Bolotin, K.I., et al., "Ultrahigh electron mobility in suspended graphene". Solid state communications, Vol. 146, no. 9-10, pp. 351-355, 2008.
50. Lee, C., et al., "Measurement of the elastic properties and intrinsic strength of monolayer graphene". science, Vol. 321, no. 5887, pp. 385-388, 2008.
51. Pop, E., et al., "Thermal conductance of an individual single-wall carbon nanotube above room temperature". Nano letters, Vol. 6, no. 1, pp. 96-100, 2006.
52. Lin, Y., et al., "Graphene/semiconductor heterojunction solar cells with modulated antireflection and graphene work function". Energy & Environmental Science, Vol. 6, no. 1, pp. 108-115, 2013.
53. Zhu, Z., et al., "Thin film transistors based on two dimensional graphene and graphene/semiconductor heterojunctions". RSC advances, Vol. 7, no. 28, pp. 17387-17397, 2017.
54. Wang, X., L. Zhi, and K. Müllen, "Transparent, conductive graphene electrodes for dye-sensitized solar cells". Nano letters, Vol. 8, no. 1, pp. 323-327, 2008.
55. Eda, G., G. Fanchini, and M. Chhowalla, "Large-area ultrathin films of reduced graphene oxide as a transparent and flexible electronic material". Nature nanotechnology, Vol. 3, no. 5, pp. 270-274, 2008.
56. Wang, H., et al., "Wrinkled graphene cages as hosts for high-capacity Li metal anodes shown by cryogenic electron microscopy". Nano letters, Vol. 19, no. 2, pp. 1326-1335, 2019.
57. Stankovich, S., et al., "Graphene-based composite materials". nature, Vol. 442, no. 7100, pp. 282-286, 2006.
58. Yao, Y., et al., "Mosaic rGO layers on lithium metal anodes for the effective mediation of lithium plating and stripping". Journal of Materials Chemistry A, Vol. 7, no. 19, pp. 12214-12224, 2019.
59. Liu, C., et al., "Advance on the dispersion treatment of graphene oxide and the graphene oxide modified cement-based materials". Nanotechnology Reviews, Vol. 10, no. 1, pp. 34-49, 2021.
60. Su, C.-Y., et al., "High-quality thin graphene films from fast electrochemical exfoliation". ACS nano, Vol. 5, no. 3, pp. 2332-2339, 2011.
61. Lu, Y., et al., "Stable lithium electrodeposition in salt-reinforced electrolytes". Journal of Power Sources, Vol. 279, pp. 413-418, 2015.
62. Sun, S., et al., "Facile ex situ formation of a LiF–polymer composite layer as an artificial SEI layer on Li metal by simple roll-press processing for carbonate electrolyte-based Li metal batteries". Journal of Materials Chemistry A, Vol. 8, no. 33, pp. 17229-17237, 2020.
63. Luo, Z., et al., "Ultrafast Li/Fluorinated Graphene Primary Batteries with High Energy Density and Power Density". ACS Applied Materials & Interfaces, Vol. 13, no. 16, pp. 18809-18820, 2021.
64. Cheng, H., et al., "Dendrite-Free Fluorinated Graphene/Lithium Anodes Enabling in Situ LiF Formation for High-Performance Lithium–Oxygen Cells". ACS applied materials & interfaces, Vol. 11, no. 43, pp. 39737-39745, 2019.
65. Rojaee, R. and R. Shahbazian-Yassar, "Two-dimensional materials to address the lithium battery challenges". ACS nano, Vol. 14, no. 3, pp. 2628-2658, 2020.
66. Sin, Y.-Y., et al., "Ultrastrong adhesion of fluorinated graphene on a substrate: In situ electrochemical conversion to ionic-covalent bonding at the interface". Carbon, Vol. 169, pp. 248-257, 2020.
67. "Anif Jamaluddin, "Graphene-Modified Electrode for Advanced Anode Materials in Lithium-Ion Batteries", 國立中央大學, 博士論文, 民國110年01月".
68. Samarakoon, D.K., et al., "Structural and electronic properties of fluorographene". Small, Vol. 7, no. 7, pp. 965-969, 2011.
69. Feng, W., et al., "Two‐dimensional fluorinated graphene: synthesis, structures, properties and applications". Advanced Science, Vol. 3, no. 7, pp. 1500413, 2016.
70. Fan, L., et al., "Regulating Li deposition at artificial solid electrolyte interphases". Journal of Materials Chemistry A, Vol. 5, no. 7, pp. 3483-3492, 2017.
71. Tian, S., et al., "Testing Method of Density and Porosity of Dense Ceramic Materials". Physical Testing and Chemical Analysis (Part A: Physical Testing), Vol. 8, 2011.
72. https://en.wikipedia.org/wiki/Graphite.
73. Liang, Z., et al., "Composite lithium metal anode by melt infusion of lithium into a 3D conducting scaffold with lithiophilic coating". Proceedings of the National Academy of Sciences, Vol. 113, no. 11, pp. 2862-2867, 2016.
74. Conradi, M., et al., "Mechanical and anticorrosion properties of nanosilica-filled epoxy-resin composite coatings". Applied Surface Science, Vol. 292, pp. 432-437, 2014.
75. Weng, C.-J., et al., "Advanced anticorrosive coatings prepared from the mimicked xanthosoma sagittifolium-leaf-like electroactive epoxy with synergistic effects of superhydrophobicity and redox catalytic capability". Chemistry of Materials, Vol. 23, no. 8, pp. 2075-2083, 2011.
76. Ding, J., et al., "Nafion-endowed graphene super-anticorrosion performance". ACS Sustainable Chemistry & Engineering, Vol. 8, no. 40, pp. 15344-15353, 2020.
77. Pei, A., et al., "Nanoscale nucleation and growth of electrodeposited lithium metal". Nano letters, Vol. 17, no. 2, pp. 1132-1139, 2017.
78. Lin, K., et al., "Dendrite-free lithium deposition enabled by a vertically aligned graphene pillar architecture". Carbon, Vol. 185, pp. 152-160, 2021. |