參考文獻 |
[1] H. Hashemi and A. Hajimiri, “Concurrent multiband low-noise amplifiers—Theory, design, and applications,” IEEE Trans. Microw. Theory Techn., vol. 50, no. 1, pp. 288–301, Jan. 2002.
[2] Y.-S. Lin and C.-H. Wei, “A novel miniature dual-band impedance matching network for frequency-dependent complex impedances,” IEEE Trans. Microw. Theory Techn., vol. 68, no. 10, pp. 4314–4326, Oct. 2020.
[3] W.-T. Fang, E.-W. Chang, and Y.-S. Lin, “Bridged-T coil for miniature dual-band branch-line coupler and power divider designs,” IEEE Trans. Microw. Theory Techn., vol. 66, no. 2, pp. 889–901, Feb. 2018.
[4] S. Sattar and T. Z. A. Zulkifli, “A 2.4/5.2-GHz concurrent dual-band CMOS low noise amplifier,” IEEE Access, vol. 5, pp. 21148–21156, 2017.
[5] T. Kitano, K. Komoku, T. Morishita, and N. Itoh, “A CMOS LNA equipped with concurrent dual-band matching networks,” in Proc. IEEE Asia Pacific Microw. Conf. (APMC), Nov. 2017, pp. 566–569.
[6] Y. Sawayama, T. Morishita, K. Komoku, and N. Itoh, “Dual-band concurrent low noise LNA,” in Proc. IEEE Int. Symp. Radio-Frequency Integr. Technol. (RFIT), Sep. 2020, pp. 160–162.
[7] Y. Sawayama, T. Morishita, K. Komoku, and N. Itoh, “Dual-band concurrent LNA with low gain deviation and low noise figure,” in Proc. IEEE Asia Pacific Microw. Conf. (APMC), Nov. 2020, pp. 1006–1008.
[8] Y.-C. Hsiao, C. Meng, and C. Yang, “Design optimization of single-/dual-band FET LNAs using noise transformation matrix,” IEEE Trans. Microw. Theory Techn., vol. 64, no. 2, pp. 519–532, Feb. 2016.
[9] W. L. Chang, C. Meng, J. H. Ni, K. C. Chang, C. K. Chang, P. Y. Lee, and Y. L. Huang, ‘‘Analytical noise optimization of single-/dual-band MOS LNAs with substrate and metal loss effects of inductors,’’ IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 66, no. 7, pp. 2454–2467, Jul. 2019.
[10] Y.-J. Hong, S.-F. Wang, P.-T. Chen, Y.-S. Hwang, and J.-J. Chen, “A concurrent dual-band 2.4/5.2 GHz low-noise amplifier using gain enhanced techniques,” in Proc. Asia-Pacific Symp. Electromagn. Compat. (APEMC), May 2015, pp. 231–234.
[11] K.-A. Hsieh, H.-S. Wu, K.-H. Tsai, and C.-K. C. Tzuang, “A dual-band 10/24-GHz amplifier design incorporating dual-frequency complex load matching,” IEEE Trans. Microw. Theory Techn., vol. 60, no. 6, pp. 1649–1657, Jun. 2012.
[12] 魏俊豪:<微小化雙頻匹配電路設計及應用>,碩士論文,國立中央大學,西元2020年1月。
[13] G. Nikandish, E. Babakrpur, and A. Medi, “A harmonic termination technique for single- and multi-band high-efficiency class-F MMIC power amplifiers,” IEEE Trans. Microw. Theory Techn., vol. 62, no. 5, pp. 1212–1220, May 2014.
[14] A. Alizadeh, M. Frounchi, and A. Medi, “Dual-band design of integrated class-J power amplifiers in GaAs pHEMT technology,” IEEE Trans. Microw. Theory Techn., vol. 65, no. 8, pp. 3034–3045, Aug 2017.
[15] P. Zurek and Z. Popovic, “Two-stage concurrent X/Ku dual-band GaAs MMIC power amplifier,” in IEEE MTT-S Int. Microw. Symp. Dig., Aug. 2020, pp. 269–272.
[16] G. Lv, W. Chen, X. Chen, and Z. Feng, “An energy-efficient Ka/Q dual-band power amplifier MMIC in 0.1-μm GaAs process,” IEEE Microw. Wireless Compon. Lett., vol. 28, no. 6, pp. 530–532, May 2018.
[17] H. Xie, Y. J. Cheng, Y. R. Ding, L. Wang and Y. Fan, “A high-efficiency 28 GHz/39 GHz dual-band power amplifier MMIC for 5G communication,” IEEE Microw. Wireless Compon. Lett., vol. 31, no. 11, pp. 1227–1230, Nov. 2021.
[18] R. Quaglia, V. Camarchia, and M. Pirola, “Dual-band GaN MMIC power amplifier for microwave backhaul applications,” IEEE Microw. Wireless Compon. Lett., vol. 24, no. 6, pp. 409–411, Jun. 2014.
[19] Z.-J. Huang, Z.-H. Fu, B.-W. Huang, Y.-T. Lin, K.-Y. Kao, and K.-Y. Lin, ‘‘A millimeter-wave dual-band class-F power amplifier in 90 nm CMOS,’’ in Proc. IEEE Int. Symp. Radio-Freq. Integr. Technol. (RFIT), Sep. 2020, pp. 70–72.
[20] K. Ding, D. M. W. Leenaerts, H. Gao, “A 28/38 GHz dual-band power amplifier for 5G communication,” IEEE Trans. Microw. Theory Techn., early access.
[21] C. Huynh and C. Nguyen, “New technique for synthesizing concurrent dual-band impedance-matching filtering networks and 0.18-μm SiGe BiCMOS 25.5/37-GHz concurrent dual-band power amplifier,” IEEE Trans. Microw. Theory Techn., vol. 61, no. 11, pp. 3927–3939, Nov. 2013.
[22] 方偉廷:<基於橋式T線圈之微型化切換式波束成型模組>,博士論文,國立中央大學,西元2017年6月。
[23] IEEE Standard for Information technology—Telecommunications and information exchange between systems–Local and metropolitan area networks—Specific requirements–Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications, IEEE Standard 802.11-2016, pp. 1–3534, Dec. 2016.
[24] D. K. Shaeffer and T. H. Lee, “A 1.5-V, 1.5-GHz CMOS low noise amplifier,” IEEE J. Solid-State Circuits, vol. 32, no. 5, pp. 745–759, May 1997.
[25] A. Nieuwoudt, T. Ragheb, H. Nejati, Y. Massoud, "Numerical design optimization methodology for wideband and multi-band inductively degenerated cascode CMOS low noise amplifiers," IEEE Transactions on Circuits and Systems I: Regular Papers, vol.56, no.6, pp.1088-1101, Jun. 2009.
[26] P. Andreani and H. Sjoland, ‘‘Noise optimization of an inductively degenerated CMOS low noise amplifier,’’ IEEE Trans. Circuits Syst. II, Analog Digit. Signal Process., vol. 48, no. 9, pp. 835–841, Sep. 2001.
[27] T.-K. Nguyen, C.-H. Kim, G.-J. Ihm, M.-S. Yang, and S.-G. Lee, “CMOS low-noise amplifier design optimization techniques,” IEEE Trans. Microw. Theory Techn., vol. 52, no. 5, pp. 1433–1442, May 2004.
[28] G. Gonzalez, Microwave Transistor Amplifiers: Analysis and Design, 2nd ed. Upper Saddle River, NJ, USA: Prentice-Hall, 1997.
[29] M. L. Edwards and J. H. Sinsky, “A New Criteria for Linear 2-Port Stability Using a Single Geometrically Derived Parameter,” IEEE Trans. Microw. Theory Techn., vol. 40, no. 12, pp. 2303–2311, Dec. 1992.
[30] D. Linten et al., “A 5-GHz fully integrated ESD-protected low-noise amplifier in 90-nm RF CMOS,” IEEE J. Solid-State Circuits, vol. 40, no. 7, pp. 1434–1442, Jul. 2005.
[31] Y.-C. Wang, Z.-Y. Huang, and T. Jin, “A 2.35/2.4/2.45/2.55 GHz low-noise amplifier design using body self-biasing technique for ISM and LTE band application,” IEEE Access, vol. 7, pp. 183761–183769, 2019.
[32] IEEE Standard for Information technology—Telecommunications and information exchange between systems–Local and metropolitan area networks—Specific requirements–Part 11: Wireless LAN Medium Access Control (MAC) and Physical Layer (PHY) Specifications–Amendment 4: Enhancements for Very High Throughput for Operation in Bands below 6 GHz, IEEE Standard 802.11ac-2013, pp.1-425, Dec. 2013. |