參考文獻 |
[1] D. R. Thévenot, K. Toth, R. A. Durst, and G. S. Wilson, “Electrochemical biosensors: Recommended definitions and classification,” Biosens. Bioelectron., vol. 16, no. 1–2, pp. 121–131, 2001, doi: 10.1016/S0956-5663(01)00115-4.
[2] G. Luka et al., “Microfluidics integrated biosensors: A leading technology towards lab-on-A-chip and sensing applications,” Sensors (Switzerland), vol. 15, no. 12, pp. 30011–30031, 2015, doi: 10.3390/s151229783.
[3] M. E. E. Alahi and S. C. Mukhopadhyay, “Detection methodologies for pathogen and toxins: A review,” Sensors (Switzerland), vol. 17, no. 8, pp. 1–20, 2017, doi: 10.3390/s17081885.
[4] V. Perumal and U. Hashim, “Advances in biosensors: Principle, architecture and applications,” J. Appl. Biomed., vol. 12, no. 1, pp. 1–15, 2014, doi: 10.1016/j.jab.2013.02.001.
[5] P. Mehrotra, “Biosensors and their applications - A review,” J. Oral Biol. Craniofacial Res., vol. 6, no. 2, pp. 153–159, 2016, doi: 10.1016/j.jobcr.2015.12.002.
[6] Y. Zhou, Y. Fang, and R. P. Ramasamy, “Non-covalent functionalization of carbon nanotubes for electrochemical biosensor development,” Sensors (Switzerland), vol. 19, no. 2, 2019, doi: 10.3390/s19020392.
[7] D. Bizzotto, I. J. Burgess, T. Doneux, T. Sagara, and H. Z. Yu, “Beyond Simple Cartoons: Challenges in Characterizing Electrochemical Biosensor Interfaces,” ACS Sensors, vol. 3, no. 1, pp. 5–12, 2018, doi: 10.1021/acssensors.7b00840.
[8] J. Y. Lichtenberg, Y. Ling, and S. Kim, “Non-specific adsorption reduction methods in biosensing,” Sensors (Switzerland), vol. 19, no. 11, pp. 1–17, 2019, doi: 10.3390/s19112488.
[9] J. C. Love, L. A. Estroff, J. K. Kriebel, R. G. Nuzzo, and G. M. Whitesides, Self-assembled monolayers of thiolates on metals as a form of nanotechnology, vol. 105, no. 4. 2005.
[10] A. Ulman, “Formation and Structure of Self-Assembled Monolayers,” 1996.
[11] N. Faucheux, R. Schweiss, K. Lützow, C. Werner, and T. Groth, “Self-assembled monolayers with different terminating groups as model substrates for cell adhesion studies,” Biomaterials, vol. 25, no. 14, pp. 2721–2730, 2004, doi: 10.1016/j.biomaterials.2003.09.069.
[12] R. Chang et al., “Water near bioinert self-assembled monolayers,” Polym. J., vol. 50, no. 8, pp. 563–571, 2018, doi: 10.1038/s41428-018-0075-1.
[13] A. Chandekar, S. K. Sengupta, and J. E. Whitten, “Thermal stability of thiol and silane monolayers: A comparative study,” Appl. Surf. Sci., vol. 256, no. 9, pp. 2742–2749, 2010, doi: 10.1016/j.apsusc.2009.11.020.
[14] M. Cerruti, S. Fissolo, C. Carraro, C. Ricciardi, A. Majumdar, and R. Maboudian, “Poly(ethylene glycol) monolayer formation and stability on gold and silicon nitride substrates,” Langmuir, vol. 24, no. 19, pp. 10646–10653, 2008, doi: 10.1021/la801357v.
[15] R. S. C. Woo, H. Zhu, M. M. K. Chow, C. K. Y. Leung, and J. K. Kim, “Barrier performance of silane-clay nanocomposite coatings on concrete structure,” Compos. Sci. Technol., vol. 68, no. 14, pp. 2828–2836, 2008, doi: 10.1016/j.compscitech.2007.10.028.
[16] G. L. Witucki, “BACK TO BASICS A Silane Primer: Chemistry and Applications of AIkoxy Silanes,” October, vol. 65, no. 822, pp. 57–60, 1992, [Online]. Available: http://www.mendeley.com/research/a-silane-primer-chemistry-and-applications-of-aikoxy-silanes/.
[17] S. Minko, “Grafting on solid surfaces: Grafting to and grafting from methods,” Polym. Surfaces Interfaces Charact. Modif. Appl., pp. 215–234, 2008, doi: 10.1007/978-3-540-73865-7_11.
[18] M. Kim, S. K. Schmitt, J. W. Choi, J. D. Krutty, and P. Gopalan, “From self-assembled monolayers to coatings: Advances in the synthesis and nanobio applications of polymer brushes,” Polymers (Basel)., vol. 7, no. 7, pp. 1346–1378, 2015, doi: 10.3390/polym7071346.
[19] S. Goyal, “Silanes: Chemistry and applications,” J. Indian Prosthodont. Soc., vol. 6, no. 1, pp. 14–18, 2006, doi: 10.4103/0972-4052.25876.
[20] M. Zhu, M. Z. Lerum, and W. Chen, “How to prepare reproducible, homogeneous, and hydrolytically stable aminosilane-derived layers on silica,” Langmuir, vol. 28, no. 1, pp. 416–423, 2012, doi: 10.1021/la203638g.
[21] T. J. Lee, L. K. Chau, and C. J. Huang, “Controlled Silanization: High Molecular Regularity of Functional Thiol Groups on Siloxane Coatings,” Langmuir, vol. 36, no. 21, pp. 5935–5943, 2020, doi: 10.1021/acs.langmuir.0c00745.
[22] M. W. Schmidt, T. L. Windus, and M. S. Gordon, “Structural Trends in Silicon Atranes,” J. Am. Chem. Soc., vol. 117, no. 28, pp. 7480–7486, 1995, doi: 10.1021/ja00133a020.
[23] V. Pestunovich, S. Kirpichenko, and M. Voronkov, Silatranes and their Tricyclic Analogs. 2009.
[24] J. K. Puri, R. Singh, and V. K. Chahala, “Silatranes: A review on their synthesis, structure, reactivity and applications,” Chem. Soc. Rev., vol. 40, no. 3, pp. 1791–1840, 2011, doi: 10.1039/b925899j.
[25] Y. T. Tseng, H. Y. Lu, J. R. Li, W. J. Tung, W. H. Chen, and L. K. Chau, “Facile Functionalization of Polymer Surfaces in Aqueous and Polar Organic Solvents via 3-Mercaptopropylsilatrane,” ACS Appl. Mater. Interfaces, vol. 8, no. 49, pp. 34159–34169, 2016, doi: 10.1021/acsami.6b13926.
[26] V. Lacour, K. Moumanis, W. M. Hassen, C. Elie-Caille, T. Leblois, and J. J. Dubowski, “Formation Kinetics of Mixed Self-Assembled Monolayers of Alkanethiols on GaAs(100),” Langmuir, vol. 35, no. 13, pp. 4415–4427, 2019, doi: 10.1021/acs.langmuir.7b00929.
[27] A. Hasan and L. M. Pandey, Self-assembled monolayers in biomaterials. Elsevier Ltd., 2018.
[28] F. Frederix et al., “Enhanced performance of an affinity biosensor interface based on mixed self-assembled monolayers of thiols on gold,” Langmuir, vol. 19, no. 10, pp. 4351–4357, 2003, doi: 10.1021/la026908f.
[29] Y. S. Wang, S. Yau, L. K. Chau, A. Mohamed, and C. J. Huang, “Functional Biointerfaces Based on Mixed Zwitterionic Self-Assembled Monolayers for Biosensing Applications,” Langmuir, vol. 35, no. 5, pp. 1652–1661, 2019, doi: 10.1021/acs.langmuir.8b01779.
[30] P. Lin, C. W. Lin, R. Mansour, and F. Gu, “Improving biocompatibility by surface modification techniques on implantable bioelectronics,” Biosens. Bioelectron., vol. 47, pp. 451–460, 2013, doi: 10.1016/j.bios.2013.01.071.
[31] S. Chen, L. Li, C. Zhao, and J. Zheng, “Surface hydration: Principles and applications toward low-fouling/nonfouling biomaterials,” Polymer (Guildf)., vol. 51, no. 23, pp. 5283–5293, 2010, doi: 10.1016/j.polymer.2010.08.022.
[32] M. J. Roberts, M. D. Bentley, and J. M. Harris, “Chemistry for peptide and protein PEGylation,” Adv. Drug Deliv. Rev., vol. 64, no. SUPPL., pp. 116–127, 2012, doi: 10.1016/j.addr.2012.09.025.
[33] Y. Y. Luk, M. Kato, and M. Mrksich, “Self-assembled monolayers of alkanethiolates presenting mannitol groups are inert to protein adsorption and cell attachment,” Langmuir, vol. 16, no. 24, pp. 9604–9608, 2000, doi: 10.1021/la0004653.
[34] J. M. Harris, “Introducdon to Blotechnlcal and Biomedical Appllcadons of Poly ( Ethylene Glycol ),” no. 1, pp. 1–14.
[35] I. Francolini, I. Silvestro, V. Di Lisio, A. Martinelli, and A. Piozzi, “Synthesis, characterization, and bacterial fouling-resistance properties of polyethylene glycol-grafted polyurethane elastomers,” Int. J. Mol. Sci., vol. 20, no. 4, 2019, doi: 10.3390/ijms20041001.
[36] B. Mizrahi et al., “Long-lasting antifouling coating from multi-armed polymer,” Langmuir, vol. 29, no. 32, pp. 10087–10094, 2013, doi: 10.1021/la4014575.
[37] X. Ding et al., “Antibacterial and antifouling catheter coatings using surface grafted PEG-b-cationic polycarbonate diblock copolymers,” Biomaterials, vol. 33, no. 28, pp. 6593–6603, 2012, doi: 10.1016/j.biomaterials.2012.06.001.
[38] S. Lowe, N. M. O’Brien-Simpson, and L. A. Connal, “Antibiofouling polymer interfaces: Poly(ethylene glycol) and other promising candidates,” Polym. Chem., vol. 6, no. 2, pp. 198–212, 2015, doi: 10.1039/c4py01356e.
[39] M. Li, B. Zhuang, and J. Yu, “Functional Zwitterionic Polymers on Surface: Structures and Applications,” Chem. - An Asian J., vol. 15, no. 14, pp. 2060–2075, 2020, doi: 10.1002/asia.202000547.
[40] L. D. Blackman, P. A. Gunatillake, P. Cass, and K. E. S. Locock, “An introduction to zwitterionic polymer behavior and applications in solution and at surfaces,” Chem. Soc. Rev., vol. 48, no. 3, pp. 757–770, 2019, doi: 10.1039/c8cs00508g.
[41] N. Shahkaramipour, T. N. Tran, S. Ramanan, and H. Lin, “Membranes with surface-enhanced antifouling properties for water purification,” Membranes (Basel)., vol. 7, no. 1, pp. 1–18, 2017, doi: 10.3390/membranes7010013.
[42] J. B. Schlenoff, “Zwitteration: Coating surfaces with zwitterionic functionality to reduce nonspecific adsorption,” Langmuir, vol. 30, no. 32, pp. 9625–9636, 2014, doi: 10.1021/la500057j.
[43] L. Zheng, H. S. Sundaram, Z. Wei, C. Li, and Z. Yuan, “Applications of zwitterionic polymers,” React. Funct. Polym., vol. 118, no. June, pp. 51–61, 2017, doi: 10.1016/j.reactfunctpolym.2017.07.006.
[44] vahid salimian Rizi, “Ce Pte Us Pt,” Mater. Res. Express, pp. 0–12, 2019.
[45] K. Hirota, K. Murakami, K. Nemoto, and Y. Miyake, “Coating of a surface with 2-methacryloyloxyethyl phosphorylcholine (MPC) co-polymer significantly reduces retention of human pathogenic microorganisms,” FEMS Microbiol. Lett., vol. 248, no. 1, pp. 37–45, 2005, doi: 10.1016/j.femsle.2005.05.019.
[46] Y. Xu, M. Takai, and K. Ishihara, “Phospholipid polymer biointerfaces for lab-on-a-chip devices,” Ann. Biomed. Eng., vol. 38, no. 6, pp. 1938–1953, 2010, doi: 10.1007/s10439-010-0025-3.
[47] K. W. E. Sy Piecco, A. M. Aboelenen, J. R. Pyle, J. R. Vicente, D. Gautam, and J. Chen, “Kinetic Model under Light-Limited Condition for Photoinitiated Thiol-Ene Coupling Reactions,” ACS Omega, vol. 3, no. 10, pp. 14327–14332, 2018, doi: 10.1021/acsomega.8b01725.
[48] A. K. O’Brien, N. B. Cramer, and C. N. Bowman, “Oxygen inhibition in thiol-acrylate photopolymerizations,” J. Polym. Sci. Part A Polym. Chem., vol. 44, no. 6, pp. 2007–2014, 2006, doi: 10.1002/pola.21304.
[49] M. Uygun, M. A. Tasdelen, and Y. Yagci, “Influence of type of initiation on thiol-ene ‘click’ Chemistry,” Macromol. Chem. Phys., vol. 211, no. 1, pp. 103–110, 2010, doi: 10.1002/macp.200900442.
[50] T. O. Machado, C. Sayer, and P. H. H. Araujo, “Thiol-ene polymerisation: A promising technique to obtain novel biomaterials,” Eur. Polym. J., vol. 86, pp. 200–215, 2017, doi: 10.1016/j.eurpolymj.2016.02.025.
[51] F. Rusmini, Z. Zhong, and J. Feijen, “Protein Immobilization Strategies for Protein Biochips,” pp. 1775–1789, 2007.
[52] H. Ju, N. Hyun, B. Hyun, and G. Hun, “Micropatterning of biomolecules on glass surfaces modi W ed with various functional groups using photoactivatable biotin,” vol. 347, pp. 60–66, 2005, doi: 10.1016/j.ab.2005.08.015.
[53] S. K. Vashist, “Comparison of 1-Ethyl-3-(3-Dimethylaminopropyl) Carbodiimide Based Strategies to Crosslink Antibodies on Amine-Functionalized Platforms for Immunodiagnostic Applications,” pp. 23–33, 2012, doi: 10.3390/diagnostics2030023.
[54] H. Vaisocherová, E. Brynda, and J. Homola, “Functionalizable low-fouling coatings for label-free biosensing in complex biological media: advances and applications,” Anal. Bioanal. Chem., vol. 407, no. 14, pp. 3927–3953, 2015, doi: 10.1007/s00216-015-8606-5.
[55] M. Zangoli et al., “Engineering thiophene-based nanoparticles to induce phototransduction in live cells under illumination †,” pp. 9202–9209, 2017, doi: 10.1039/c7nr01793f.
[56] S. Aitekenov, A. Gaipov, and R. Bukasov, “Review: Detection and quantification of proteins in human urine,” Talanta, vol. 223, p. 121718, 2021, doi: 10.1016/j.talanta.2020.121718.
[57] C. Giovannoli, L. Anfossi, C. Baggiani, and G. Giraudi, “A novel approach for a non competitive capillary electrophoresis immunoassay with laser-induced fluorescence detection for the determination of human serum albumin,” J. Chromatogr. A, vol. 1155, no. 2, pp. 187–192, 2007, doi: 10.1016/j.chroma.2007.02.056.
[58] B. X. Huang, H. Y. Kim, and C. Dass, “Probing three-dimensional structure of bovine serum albumin by chemical cross-linking and mass spectrometry,” J. Am. Soc. Mass Spectrom., vol. 15, no. 8, pp. 1237–1247, 2004, doi: 10.1016/j.jasms.2004.05.004.
[59] H. T. M. Phan, S. Bartelt-Hunt, K. B. Rodenhausen, M. Schubert, and J. C. Bartz, “Investigation of bovine serum albumin (BSA) attachment onto self-assembled monolayers (SAMs) using combinatorial quartz crystal microbalance with dissipation (QCM-D) and spectroscopic ellipsometry (SE),” PLoS One, vol. 10, no. 10, 2015, doi: 10.1371/journal.pone.0141282.
[60] H. Chen et al., “Enhancement of BSA binding on Au surfaces by calix[4]bisazacrown monolayer,” Sensors, vol. 7, no. 10, pp. 2263–2272, 2007, doi: 10.3390/s7102263.
[61] S. Aydin, “A short history, principles, and types of ELISA, and our laboratory experience with peptide/protein analyses using ELISA,” Peptides, vol. 72, pp. 4–15, 2015, doi: 10.1016/j.peptides.2015.04.012.
[62] C. J. Huang and Y. Y. Zheng, “Controlled Silanization Using Functional Silatrane for Thin and Homogeneous Antifouling Coatings,” Langmuir, vol. 35, no. 5, pp. 1662–1671, 2019, doi: 10.1021/acs.langmuir.8b01981.
[63] S. Subramanian, R. C. Huiszoon, S. Chu, W. E. Bentley, and R. Ghodssi, “Microsystems for biofilm characterization and sensing – A review,” Biofilm, vol. 2, no. November 2019, 2020, doi: 10.1016/j.bioflm.2019.100015.
[64] M. Fischer, G. J. Triggs, and T. F. Krauss, “Optical sensing of microbial life on surfaces,” Appl. Environ. Microbiol., vol. 82, no. 5, pp. 1362–1371, 2016, doi: 10.1128/AEM.03001-15.
[65] B. W. Chieng, N. A. Ibrahim, W. M. Z. W. Yunus, and M. Z. Hussein, “Poly(lactic acid)/poly(ethylene glycol) polymer nanocomposites: Effects of graphene nanoplatelets,” Polymers (Basel)., vol. 6, no. 1, pp. 93–104, 2014, doi: 10.3390/polym6010093.
[66] S. Lim et al., “Physically cross-linked polymer binder based on poly(acrylic acid) and ion-conducting poly(ethylene glycol-co-benzimidazole) for silicon anodes,” J. Power Sources, vol. 360, pp. 585–592, 2017, doi: 10.1016/j.jpowsour.2017.06.049.
[67] A. S. Münch, M. Wölk, M. Malanin, K. J. Eichhorn, F. Simon, and P. Uhlmann, “Smart functional polymer coatings for paper with anti-fouling properties,” J. Mater. Chem. B, vol. 6, no. 5, pp. 830–843, 2018, doi: 10.1039/c7tb02886e.
[68] P. Veerakumar, T. Jeyapragasam, S. Surabhi, K. Salamalai, T. Maiyalagan, and K. C. Lin, “Functionalized Mesoporous Carbon Nanostructures for Efficient Removal of Eriochrome Black-T from Aqueous Solution,” J. Chem. Eng. Data, vol. 64, no. 4, pp. 1305–1321, 2019, doi: 10.1021/acs.jced.8b00878.
[69] Y. Coffinier, G. Piret, M. R. Das, and R. Boukherroub, “Effect of surface roughness and chemical composition on the wetting properties of silicon-based substrates,” Comptes Rendus Chim., vol. 16, no. 1, pp. 65–72, 2013, doi: 10.1016/j.crci.2012.08.011.
[70] M. James et al., “Nanoscale condensation of water on self-assembled monolayers,” Soft Matter, vol. 7, no. 11, pp. 5309–5318, 2011, doi: 10.1039/c1sm05096f.
[71] K. Wadu-Mesthrige, N. A. Amro, and G. Y. Liu, “Immobilization of proteins on self-assembled monolayers,” Scanning, vol. 22, no. 6, pp. 380–388, 2000, doi: 10.1002/sca.4950220607.
[72] Y. Raichlin and A. Katzir, “Fiber-optic evanescent wave spectroscopy in the middle infrared,” Appl. Spectrosc., vol. 62, no. 2, 2008, doi: 10.1366/000370208783575456.
[73] C. Y. Chiang, M. L. Hsieh, K. W. Huang, L. K. Chau, C. M. Chang, and S. R. Lyu, “Fiber-optic particle plasmon resonance sensor for detection of interleukin-1β in synovial fluids,” Biosens. Bioelectron., vol. 26, no. 3, pp. 1036–1042, 2010, doi: 10.1016/j.bios.2010.08.047. |