參考文獻 |
[1] E. Tidhar, J. Siegman, and D. Paikowsky, "工業4.0新戰略與發展路徑," Available: https://www2.deloitte.com/tw/tc/pages/energy-and-resources/articles/2019-industry-develop.html
[2] AWS, "Manufacturing on AWS," Available: https://d1.awsstatic.com/architecture-diagrams/ArchitectureDiagrams/manufacturing-on-aws-ra.pdf?did=wp_card&trk=wp_card
[3] C. M. Website, "Manufacturing Software for Industry 4.0-Embracing Decentralization."
[4] W. Covanich, D. McFarlane, J. Brusey, and A. Farid, "Ready configuration of machines into an existing manufacturing system," in The IET International Conference on Agile Manufacturing, 2007, pp. 41-50: IET.
[5] D. McFarlane, S. Sarma, J. L. Chirn, C. Y. Wong, and K. Ashton, "THE INTELLIGENT PRODUCT IN MANUFACTURING CONTROL AND MANAGEMENT," IFAC Proceedings Volumes, vol. 35, no. 1, pp. 49-54, 2002/01/01/ 2002.
[6] J.-L. Chirn and D. McFarlane, "Evaluating holonic control systems: a case study," IFAC Proceedings Volumes, vol. 38, no. 1, pp. 211-216, 2005.
[7] A. M. Farid, "Product Degrees of Freedom as Manufacturing System Reconfiguration Potential Measures."
[8] A. Farid, "Facilitating Ease of System Reconfiguration Through Measures of Manufacturing Modularity," Proceedings of The Institution of Mechanical Engineers Part B-journal of Engineering Manufacture - PROC INST MECH ENG B-J ENG MA, vol. 222, pp. 1275-1288, 10/01 2008.
[9] T. J. McCabe, "A Complexity Measure," IEEE Transactions on Software Engineering, vol. SE-2, no. 4, pp. 308-320, 1976.
[10] U. Tiwari and S. Kumar, "Cyclomatic complexity metric for component based software," ACM SIGSOFT Software Engineering Notes, vol. 39, pp. 1-6, 02/11 2014.
[11] A. Balador, N. Ericsson, and Z. Bakhshi, "Communication middleware technologies for industrial distributed control systems: A literature review," in 2017 22nd IEEE International Conference on Emerging Technologies and Factory Automation (ETFA), 2017, pp. 1-6.
[12] S. Sait and G. Al-Hashim, "Novel Design of Collaborative Automation Platform Using Real-Time Data Distribution Service Middleware for An Optimum Process Control Environment," Journal of Circuits, Systems and Computers, vol. 25, p. 1650063, 02/04 2016.
[13] 彭振雲, 高毅, and 唐昭琳, MES基礎與應用. 北京: 機械工業出版社, 2019.
[14] 黃培, MES選型與實施指南. 北京: 機械工業出版社, 2020.
[15] H. Pérez, J. J. Gutiérrez, S. Peiró, and A. Crespo, "Distributed architecture for developing mixed-criticality systems in multi-core platforms," Journal of Systems and Software, vol. 123, pp. 145-159, 2017/01/01/ 2017.
[16] 劉益宏 et al., 工業4.0理論與實務. 台北: 全華圖書股份有限公司, 2019.
[17] M. McClellan, Applying manufacturing execution systems. Boca Raton, Florida; Falls Church, Virginia: St. Lucie Press ; Apics, 1997.
[18] Y. Koren, X. Gu, and W. Guo, "Reconfigurable manufacturing systems: Principles, design, and future trends," Frontiers of Mechanical Engineering, vol. 13, no. 2, pp. 121-136, 2018.
[19] 簡培修, "利用延伸 Petri nets 建構校園文書工作流程模型之初探," presented at the 台灣網際網路研討會, 台灣, 2007.
[20] W. Aalst, "Three Good Reasons for Using A Petri-Net-Based Workflow Management System," vol. 11, 1998, pp. 161-182.
[21] D. Foundation. Where Can I Get DDS? Available: https://www.dds-foundation.org/where-can-i-get-dds/
[22] A. Corsaro, The Data Distribution Service Tutorial. 2014.
[23] OMG. (2021). The Real-time Publish-Subscribe Protocol DDS Interoperability Wire Protocol (DDSI-RTPSTM) Specification. Available: https://www.omg.org/spec/DDSI-RTPS/#inventory-links
[24] S. Oh, J.-H. Kim, and G. Fox, "Real-time performance analysis for publish/subscribe systems," Future Generation Comp. Syst., vol. 26, pp. 318-323, 03/01 2010.
[25] OMG, "OMG Data Distribution Service(DDS)," 2015.
[26] eProsima. FAST-RTPS. Available: https://fast-dds.docs.eprosima.com/en/latest/fastdds
[27] D. C. McFarlane and S. Bussmann, "Developments in holonic production planning and control," Production Planning & Control, vol. 11, no. 6, pp. 522-536, 2000.
[28] S. Profanter, A. Tekat, K. Dorofeev, M. Rickert, and A. Knoll, "OPC UA versus ROS, DDS, and MQTT: Performance Evaluation of Industry 4.0 Protocols," in 2019 IEEE International Conference on Industrial Technology (ICIT), 2019, pp. 955-962.
[29] R. Website, "MQTT and DDS: Machine to Machine Communication in IoT."
[30] FESTO. FESTO Cyber-Physical Factory. Available: https://www.festo-didactic.com/int-en/highlights/qualification-for-industry-4.0/?fbid=aW50LmVuLjU1Ny4xNy4xMC43NDMwLjQzMjg
[31] W. Schober, "Conveyor," Available: https://ip.festo-didactic.com/InfoPortal/EN/index.html
[32] Open Source C++ OPC-UA Server and Client Library. Available: https://github.com/FreeOpcUa/freeopcua
[33] J. Chen, H. Wang, Y. Zhou, and S. Bruda, "Complexity Metrics for Component-based Software Systems," International Journal of Digital Content Technology and its Applications, vol. 5, pp. 235-244, 03/31 2011 |