參考文獻 |
[1] Á. M. G.-Límaco, J. H. Galeti, E. C. N. Silva, R. T. Higuti, M. J. Connelly, and C. Kitano, “Digital demodulation using i/q signals and optical phase control applied to a vibrometer,” IEEE Sensors Journal, vol. 20, no. 19, pp. 11313-11325, 2020.
[2] J. Deng, S. Liu, Y. Liu, L. Wang, X. Gao, and K. Li, “A 2-dof needle insertion device using inertial piezoelectric actuator,” IEEE Transactions on Industrial Electronics, vol. 69, no. 4, pp. 3918-3927, 2022.
[3] M. Prasad, Aditi, and V. K. Khanna, “Development of mems acoustic sensor with microtunnel for high spl measurement,” IEEE Transactions on Industrial Electronics, vol. 69, no. 3, pp. 3142-3150, 2022.
[4] A. Bazaei, Y. K. Yong, and S. O. R. Moheimani, “Combining spiral scanning and internal model control for sequential afm imaging at video rate,” IEEE/ASME Transactions on Mechatronics, vol. 22, no. 1, pp. 371-380, 2017.
[5] L. Li, J. Huang, S. S. Aphale, and L. Zhu, “A smoothed raster scanning trajectory based on acceleration-continuous b-spline transition for high-speed atomic force microscopy,” IEEE/ASME Transactions on Mechatronics, vol. 26, no. 1, pp. 24-32, 2021.
[6] N. Nikooienejad, A. Alipour, M. Maroufi, and S. O. R. Moheimani, “Video-rate non-raster afm imaging with cycloid trajectory,” IEEE Transactions on Control Systems Technology, vol. 28, no. 2, pp. 436-447, 2020.
[7] D. Ziegler, T. R. Meyer, A. Amrein, A. L. Bertozzi, and P. D. Ashby, “Ideal scan path for high-speed atomic force microscopy,” IEEE/ASME Transactions on Mechatronics, vol. 22, no. 1, pp. 381-391, 2017.
[8] J.-W. Wu, Y.-T. Lin, Y.-T. Lo, W.-C. Liu, and L.-C. Fu, “Lissajous hierarchical local scanning to increase the speed of atomic force microscopy,” IEEE Transactions on Nanotechnology, vol. 14, no. 5, pp. 810-819, 2015.
[9] Y. Wu, Y. Fang, C. Wang, Z. Fan, and C. Liu, “An optimized scanning-based afm fast imaging method,” IEEE/ASME Transactions on Mechatronics, vol. 25, no. 2, pp. 535-546, 2020.
[10] N. Nikooienejad, M. Maroufi, and S. O. R. Moheimani, “Rosette-scan video-rate atomic force microscopy: trajectory patterning and control design,” Rev. Sci. Instrum., vol. 90, no. 7, 073702, 2019.
[11] Z. Sun, B. Song, N. Xi, R. Yang, L. Hao, Y. Yang, and L. Chen, “Asymmetric hysteresis modeling and compensation approach for nanomanipulation system motion control considering working-range effect,” IEEE Transactions on Industrial Electronics, vol. 64, no. 7, pp. 5513-5523, 2017.
[12] J. Fang, L. Zhang, Z. Long, and M. Y. Wang, “Fuzzy adaptive sliding mode control for the precision position of piezo-actuated nano positioning stage,” International Journal of Precision Engineering and Manufacturing, vol. 19, no. 10, pp. 1447-1456, 2018.
[13] H. Xie, Y. Wen, X. Shen, H. Zhang, and L. Sun, “High-speed afm imaging of nanopositioning stages using H∞ and iterative learning control,” IEEE Transactions on Industrial Electronics, vol. 67, no. 3, pp. 2430-2439, 2020.
[14] Y.-D. Tao, H.-X. Lib and L.-M. Zhu, “Hysteresis modeling with frequency-separation-based gaussian process and its application to sinusoidal scanning for fast imaging of atomic force microscope,” Sensors and Actuators A: Physical, vol. 311, 112070, 2020.
[15] L. Li, S. S. Aphale, and L. Zhu, “Enhanced odd-harmonic repetitive control of nanopositioning stages using spectrum-selection filtering scheme for high-speed raster scanning,” IEEE Transactions on Automation Science and Engineering, vol. 18, no. 3, pp. 1087-1096, 2021.
[16] J. Curie and P. Curie, “Développement, par pression, de l’électricité polaire dans les cristaux hémièdres à faces inclinées,” Comptes Rendus, vol. 91, pp. 294-295, 1880.
[17] M. Yoichi, “Applications of piezoelectric actuator,” NEC Technical Journal, vol. 1, no. 5, pp. 82-86, 2006.
[18] P. J. Chen and S. T. Montgomery, “A macroscopic theory for the existence of the hysteresis and butterfly loops in ferroelectricity,” Ferroelectrics, vol. 23, pp. 199-208, 1980.
[19] P. Chen, X.-X. Bai, L.-J. Qian, and S.-B. Choi, “An approach for hysteresis modeling based on shape function and memory mechanism,” IEEE/ASME Transactions on Mechatronics, vol. 23, no. 3, pp. 1270-1278, 2018.
[20] Y. Liu, D. Du, N. Qi, and J. Zhao, “A distributed parameter maxwell-slip model for the hysteresis in piezoelectric actuators,” IEEE Transactions on Industrial Electronics, vol. 66, no. 9, pp. 7150-7158, 2018.
[21] Z. Li, J. Shan, and U. Gabbert, “A direct inverse model for hysteresis compensation,” IEEE Transactions on Industrial Electronics, vol. 68, no. 5, pp. 4173-4181, 2020.
[22] Y. Fan and U-X. Tan, “Design of a feedforward-feedback controller for a piezoelectric-driven mechanism to achieve high-frequency nonperiodic motion tracking,” IEEE/ASME Transactions on Mechatronics, vol. 24, no. 2, pp. 853-862, 2019.
[23] H. Jung and D.-G. Gweon, “Creep characteristics of piezoelectric actuators,” Review of Scientific Instruments, vol. 71, no. 4, pp. 1895-1900, 1999.
[24] S. Hochreiter and J. Schmidhuber, “Long short-term memory,” Neural Computation, vol. 9, no. 8, pp. 1735-1780, 1997.
[25] F. A. Gers, N. N. Schraudolph, and J. Schmidhuber, “Learning precise timing with lstm recurrent networks,” Journal of Machine Learning Research, vol. 3, pp. 115-143, 2002.
[26] P. Mahalakshmi and N. S. Fatima, “Summarization of text and image captioning in information retrieval using deep learning techniques,” IEEE Access, vol. 10, pp. 18289-18297, 2022.
[27] J.-H. Hsu, M.-H. Su, C.-H. Wu, and Y.-H. Chen, “Attention-based convolution skip bidirectional long short-term memory network for speech emotion recognition,” IEEE/ACM Transactions on Audio, Speech, and Language Processing, vol. 29, pp. 1675-1686, 2021.
[28] X. Hou, K. Wang, C. Zhong, and Z. Wei, “ST-trader: a spatial-temporal deep neural network for modeling stock market movement,” IEEE/CAA Journal of Automatica Sinica, vol. 8, no. 5, pp. 1015-1024, 2021.
[29] G. Gelly and J.-L. Gauvain, “Optimization of rnn-based speech activity detection,” IEEE/ACM Transactions on Audio, Speech, and Language Processing, vol. 26, no. 3, pp. 646-656, 2018.
[30] C. F. Lui, Y. Liu, and M. Xie, “A supervised bidirectional long short-term memory network for data-driven dynamic soft sensor modeling” IEEE Transactions on Instrumentation and Measurement, vol. 71, 2504713, 2022.
[31] Y. Qin, D. Chen, S. Xiang, and C. Zhu, “Gated dual attention unit neural networks for remaining useful life prediction of rolling bearings,” IEEE Transactions on Industrial Informatics, vol. 17, no. 9, pp. 6438-6447, 2021.
[32] Y. Yu, L. Quan, Z. Mi, J. Lu, S. Chang, and Y. Yuan, “Improved model predictive control with prescribed performance for aggregated thermostatically controlled loads,” Journal of Modern Power Systems and Clean Energy, vol. 10, no. 2, pp. 430-439, 2022.
[33] C. Alfaro, R. Guzman, L. G. d. Vicuña, J. Miret, and M. Castilla, “Dual-loop continuous control set model-predictive control for a three-phase unity power factor rectifier,” IEEE Transactions on Power Electronics, vol. 37, no. 2, pp. 1447-1460, 2022.
[34] J. Yan, L. Jin, Z. Yuan, and Z. Liu, “RNN for receding horizon control of redundant robot manipulators,” IEEE Transactions on Industrial Electronics, vol. 69, no. 2, pp. 1608-1619, 2022.
[35] N. Qi, Y. Fang, X. Ren, and Y. Wu, “Varying-gain modeling and advanced dmpc control of an afm system,” IEEE Transactions on Nanotechnology, vol. 14, no. 1, pp. 82-92, 2015.
[36] M. S. Rana, H. R. Pota, and I. R. Petersen, “Nonlinearity effects reduction of an afm piezoelectric tube scanner using mimo mpc,” IEEE/ASME Transactions on Mechatronics, vol. 20, no. 3, pp. 1458-1469, 2015.
[37] M. A. Janaideh, M. Rakotondrabe, and O. Aljanaideh, “Further results on hysteresis compensation of smart micropositioning systems with the inverse prandtl–ishlinskii compensator,” IEEE Transactions on Control Systems Technology, vol. 24, no. 2, pp. 428-439, 2016.
[38] G.-Y. Gu, C.-X. Li, L.-M. Zhu, and C.-Y. Su, “Modeling and identification of piezoelectric-actuated stages cascading hysteresis nonlinearity with linear dynamics,” IEEE/ASME Transactions on Mechatronics, vol. 21, no. 3, pp. 1792-1797, 2016.
[39] J. Vörös, “Modeling and identification of systems with backlash,” Automatica, vol. 46, no. 2, pp. 369-374, 2010.
[40] J. M. Maciejowski, “Predictive control: with constraints,” 2002.
[41] H. K. Khalil, “Nonlinear systems,” 3rd ed. Upper Saddle River, NJ: Prentice-Hall, 2002.
[42] E. Peci, “Robustness and stability of long short-term memory recurrent neural networks,” Cybernetics and Robotics, 2021.
[43] Z.-P. Jiang and Y. Wang, “Input-to-state stability for discrete-time nonlinear systems,” Automatica, vol. 37, no. 6, pp. 857-869, 2001.
[44] G. H. Golub and C. F. van Loan, “Matrix Computations”. JHU Press, fourth ed., 2013.
[45] D. O. Cajueiroa and E. M. Hemerly, “Direct adaptive control using feedforward neural networks,” Sba Controle & Automação, vol. 14, no. 4, pp. 348-358, 2003.
[46] T. Yabuta and T. Yamada, “Learning control using neural networks,” Proc. of IEEE International Conference on Robotics and Automation, Sacramento, USA, Apr. 9-11, 1991. |