變導程雙螺桿空氣壓縮機之理論內壓縮過程模型建立及性能分析

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：22

、訪客IP：18.224.33.235

姓名

林冠佑(Kuan-Yu Lin) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

變導程雙螺桿空氣壓縮機之理論內壓縮過程模型建立及性能分析
(Theoretical Modelling of Internal Compression Process and Working Performance Analysis for Variable-lead Twin-screw Air Compressors)

相關論文

★ 應用調諧顆粒阻尼器於迴轉式壓縮機振動抑制之研究	★ 應用離散元素法與多體動力學於齒輪傳動系統動力分析模型之建立
★ 不同氣體負載下雙螺桿壓縮機動力響應及振動頻譜特徵之預測	★ 新型魯氏真空泵轉子齒形之參數化設計及性能評估
★ 以CNC內珩齒機進行螺旋齒輪齒面拓樸修整之研究	★ 雙螺桿壓縮機變導程轉子齒間法向間隙之數值計算方法及其三維幾何模型驗證
★ 不同工作條件下冷媒雙螺桿壓縮機之轉子受力分析及動載響應預測	★ 應用多體動力學及離散元素法於具阻尼顆粒齒輪及軸承系統抑振之研究
★ 具齒廓修形內嚙合非圓形齒輪創成之方法建立與其傳動誤差分析	★ 雙螺桿壓縮機於CFD仿真模擬之三維幾何簡化方法建立
★ 航空發動機齒輪箱傳動系統之強度分析與改善	★ 電動車差速齒輪傳動系統之動載分析與性能評估
★ 電動車齒輪箱之剛-柔耦合動力學模型建立及等效輻射聲功率分析	★ 指狀銑刀安裝偏差對真空泵螺桿轉子加工精度影響之研究
★ 以CNC內珩齒機加工具鼓形之錐狀齒輪之研究	★ 應用阻尼顆粒於旋轉機械之振動抑制及動平衡設計

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

至系統瀏覽論文 (2029-7-31以後開放)

摘要(中)

雙螺桿空壓機是一種廣泛應用於空氣壓縮和工業製程中的關鍵設備，其以穩定、可靠且高效的性能使其成為工業領域中不可或缺的角色。隨著工程領域的研究與發展，為了提高雙螺桿空壓機的性能，轉子的變導程設計將是影響空壓機性能的關鍵因素。因此，本研究針對雙螺桿空壓機，進行不同導程曲線下之空壓機性能分析與比較。首先，本研究在相同齒廓、相同轉子螺旋部長度以及相同轉子包封角的情況下，設計四種不同導程變化曲線，並計算分析不同導程下轉子幾何特徵之差異。接著，本研究建立理論內壓縮過程模型來模擬分析雙螺桿空壓機的壓縮循環過程。其中，模型中將包含空氣之質量守恆方程式、能量守恆方程式、氣體狀態方程式、氣體洩漏方程式與氣體排氣方程式，整體理論內壓縮過程模型包含了6個計算流量的經驗常數。在計算上，本研究使用Runge-Kutta 4th-Order Method演算法進行求解。再來，為了驗證理論模型的準確性，本研究透過實驗量測方式，並使用數值計算軟體Mathematica之最佳化模組Global Optimization最佳化求解6個經驗常數。利用最小平方法將不同轉速下理論與實際之容積排量差值，平方相加作為目標函式，以求出最符合實際排量之經驗常數。經實驗驗證後的理論模型，其容積效率的計算平均誤差均在3%之內，而等熵絕熱效率的計算平均誤差均在2%之內。最後，將不同導程曲線的轉子設計參數套入本研究建立之理論內壓縮過程模型中，探討導程對於空壓機性能之影響，找出導程變化曲線與空壓機性能之關係。

摘要(英)

Twin-screw air compressors are key devices extensively used in air compression and industrial processes, known for their stability, reliability, and efficiency, making them indispensable in the industrial sector. As research and development in engineering continue to advance, the design of variable-lead rotors has emerged as a critical factor influencing the performance of these compressors. Consequently, this study focuses on analyzing and comparing the performance of twin-screw air compressors under different lead curve designs. Initially, the study designs four different variable-lead curves while maintaining the same tooth profile, rotor length, and rotor wrap angle, and then analyzes the differences in rotor geometric characteristics under varying leads. Furthermore, this research develops a theoretical internal compression process model to simulate the compression cycle of twin-screw air compressors. This model includes equations for mass conservation, energy conservation, gas state, gas leakage, and gas exhaust, and incorporates six empirical constants for flow calculations. The Runge-Kutta 4th-Order Method is employed for computational solutions. To verify the accuracy of the theoretical model, the study utilizes experimental measurements along with Mathematica′s Global Optimization module to optimize these six empirical constants. The least squares method is applied to aggregate the squared differences between theoretical and actual volumetric displacements at varying speeds as the objective function, aiming to determine the empirical constants that best match actual displacements. The validated theoretical model demonstrates an average error in volumetric efficiency calculations within 3% and an average error in isentropic efficiency calculations within 2%. Finally, the study inserts the rotor design parameters from variable-lead curves into the established theoretical internal compression process model to explore the impact of lead changes on compressor performance, thereby elucidating the relationship between lead variation curves and compressor performance.

關鍵字(中)

★ 雙螺桿空壓機
★ 變導程
★ 螺桿轉子
★ 幾何特徵
★ 內壓縮

關鍵字(英)

★ Twin-screw Air Compressor
★ Variable-lead
★ Screw Rotor
★ Geometric Characteristics
★ Internal Compression

論文目次

摘要 i
ABSTRACT ii
謝誌 iv
目錄 v
圖目錄 vii
表目錄 x
參數符號表 xi
第1章緒論 1
1-1 前言 1
1-2 文獻回顧 4
1-3 研究目的 9
1-4 論文架構 10
第2章變導程雙螺桿轉子之幾何模型建立 12
2-1 轉子端面齒廓之設計 12
2-2 轉子齒廓創生與座標系統建立 15
2-3 雙螺桿轉子之幾何特徵基本參數與幾何規格 20
2-4 齒間面積與齒間容積 22
2-5 徑/軸向吸、排氣孔口設計與面積變化曲線 25
2-6 接觸線長度與面積變化曲線 29
2-7 回吹口面積變化曲線 31
2-8 齒頂密封螺旋線洩漏面積變化曲線 33
第3章空壓機之理論內壓縮過程模型建立 34
3-1 空壓機性能計算參數 34
3-2 雙螺桿空壓機之工作過程模型 35
3-3 數值計算方法 36
3-4 初始狀態模型之建立 38
3-5 完整理論內壓縮過程模型 42
3-6 雙螺桿空壓機之容積效率與等熵絕熱效率 46
第4章實驗驗證與性能比較 48
4-1 實驗設備與量測方法 48
4-2 實驗量測結果 51
4-3 理論內壓縮過程模型之經驗常數確定流程 54
4-4 理論內壓縮過程模型之敏感度分析 59
4-5 不同導程曲線下空壓機性能之比較與討論 61
4-6 導程變化曲線之優化分析結果 67
第5章總結與未來展望 72
5-1 總結 72
5-2 未來展望 74
參考文獻 75
作者簡介 79

參考文獻

[1] Z.W. Xing, Screw Compressor: Theory, Design and Application, China Machine Press, Beijing, 2000.
[2] L. Zhang and J.F. Hamilton, “Main Geometric Characteristics of the Twin Screw Compressor,” International Compressor Engineering Conference, Purdue University, West Lafayette, Paper 835, 1992.
[3] N. Stosic and K. Hanjalic, “General Method for Screw Compressor Profile Generation,” International Compressor Engineering Conference, Purdue University, West Lafayette, Paper 1099, 1996.
[4] N. Stosic and K. Hanjalic, “Development and Optimization of Screw Machines with a Simulation Model,” J. Fluids Eng., 119(3): 664-670, 1997.
[5] N. Stosic, I.K. Smith, and A. Kovacevic, “The Design of a Twin-screw Compressor based on a New Rotor Profile,” J. Eng. Des., 8(4): 389-399, 1997.
[6] S.H. Su and C.H. Tseng, “Synthesis and Optimization for Rotor Profiles in Twin Rotor Screw Compressors,” J. Mech. Des., 122(4): 543-552, 1998.
[7] H.G. Wu and Z.W. Xing, “Theoretical and Experimental Study on Indicator Diagram of Twin Screw Refrigeration Compressor,” Int. J. Refrig., Volume 27, Issue 4, Pages 331-338, 2004.
[8] V.E. Sarah, D.S. Joris, and V.D.B. Eric, “Integral Modeling of a Twin-Screw Compressor,” J. Mech. Des., 138(7): 073401, 2016.
[9] N. Stosic, I.K. Smith, and A. Kovacevic, Screw Compressors – Mathematical Modeling and Performance Calculation, Spring, City University, London, 2005.
[10] J.S. Fleming and Y. Tang, “The Analysis of Leakage in a Twin-Screw Compressor and Its Application to Performance Improvement,” P. I. Mech. E-J Pro., 209(25): 125-136, 1995.
[11] J.S. Fleming, Y. Tang, and G. Cook, “The Twin Helical Screw Compressor Part 1: Development, Applications and Competitive Position,” P. I. Mech. Eng. C-J Mec., 212(5): 355-367, 1998.
[12] J.S. Fleming, Y. Tang, and G. Cook, “The Twin Helical Screw Compressor Part 2： A Mathematical Model of the Working Process,” P. I. Mech. Eng. C-J Mec., 212(5): 369-380, 1998.
[13] 謝昇宏、謝文馨，「噴油式空氣螺旋壓縮機之壓縮循環與轉子熱傳分析」，國立中正大學，博士論文，2011。
[14] D. Zaytsev and C.A. Infante Ferreira, “Profile Generation Method for Twin Screw Compressor Rotors based on the Meshing Line,” Int. J. Refrig., Volume 28, Issue 5, Pages 744-755, 2005.
[15] Y.R. Wu and Z.H. Fong, “Improved Rotor Profiling based on the Arbitrary Sealing Line for Twin-Screw Compressors,” Mech. Mach. Theory, Volume 43, Issue 6, Pages 695-711, 2008.
[16] Y.R. Wu and Z.H. Fong, “Rotor Profile Design for the Twin-Screw Compressor based on the Normal-Rack Generation Method,” J. Mech. Des., 130(4): 042601, 2008.
[17] S. Rane, A. Kovacevic, N. Stosic, and M. Kethidi, “Deforming Grid Generation and CFD Analysis of Variable Geometry Screw Compressors,” Computers & Fluids, Volume 99, Pages 124-141, 2014.
[18] M. Utri and A. Brümmer, “Opportunities for Variable Rotor Lead in Screw Compressors Depending on Dimensionless Numbers,” P. I. Mech. Eng. E-J Pro., Volume 236, Issue 1, 2016.
[19] M. Utri and A. Brümmer, “Improvement of the Efficiency of Twin-Screw Refrigeration Compressors by Means of Dual Lead Rotors,” International Compressor Engineering Conference, Purdue University, West Lafayette, Paper 2474, 2016.
[20] M. Utri and A. Brümmer, “Energy Potential of Dual Lead Rotors for Twin Screw Compressors,” IOP Conf. Ser. Mater. Sci. Eng., 232, 012018, 2017.
[21] C.Y. Huang and D.C. Yang, “New Twin Screw Compressor Design by Deviation Function Method,” University of California Los Angeles, 2015.
[22] H.G. Wu, J.K. Liu, Y.Q. Shen, M.T. Liang, and B.Y. Zhang, “Research on Performance of Variable-Lead Rotor Twin Screw Compressor,” Energies, 14(21), 6970, 2021.
[23] 石寶鎧、吳育仁，「冷媒雙螺桿壓縮機轉子齒廓特徵對性能指標影響之研究」，國立中央大學，碩士論文，2020。
[24] U.M. Ascher and L.R. Petzold, “Computer Methods for Ordinary Differential Equations and Differential-Algebraic Equations,” Philadelphia: Society for Industrial and Applied Mathematics, ISBN 978-0-89871-412-8, 1998.
[25] 林崇堯、吳育仁，「冷媒雙螺桿壓縮機之容積調節滑閥負載分析」，國立中央大學，碩士論文，2019。
[26] F.L. Litvin, Teoria Zubchanih Zaceplenii (Theory of Gearing), Nauka, Moscow, 1956, second edition, 1968.
[27] D. Zaytsev and C.A. Infante Ferreira, “Profile Generation Method for Twin Screw Compressor Rotors based on the Meshing Line,” Int. J. Refrig., Volume 28, Pages 744-755, 2005.
[28] D. Laurie, “Calculation of Gauss-Kronrod Quadrature Rules,” Mathematics of Computation, 66(219): 1133-1145, 1997.
[29] M.T. Hoang, Y.R. Wu, and T.L. Nguyen, “A Universal Rotor Design Method for Twin-Rotor Fluid Machines with a Parameterized Sealing Line Considering Inter-Lobe Clearances,” Vacuum, Volume 189, 110276, 2021.
[30] F.I.J. Thomas and E.L. Peter, “Steam and Gas table with Computer Equation,” Academic Press, Inc., Orlando, USA, 1984.
[31] H.G. Wu, Z.W. Xing, and P.C. Shu, “Theoretical and Experimental study on Indicator Diagram of Twin-Screw Refrigeration Compressor,” Int. J. Refrig., Pages 331-338, 2004.
[32] ISO, “Displacement Compressors — Acceptance Tests — Part C: Simplified Acceptance Test for Electrically Driven Packaged Displacement Compressors,” ISO 1217, 2009.
[33] D. Zwillinger, Standard Mathematical Tables and Formulae, CRC Press, Boca Raton, 2011.

指導教授

吳育仁(Yu-Ren Wu)

審核日期

2024-7-18

推文