參考文獻 |
1. 何中森, "ABS合膠系列的應用, " 塑膠資訊, 1997, pp.44-50.
2. A. K. Kulshreshtha, "A Review of Commercial Polyblends Bases on PVC, ABS, and PC, " Polymer Plastic Technology and Engineering, Vol.32, No.6, 1993, pp.551-578.
3. A. Ram, O. Zilber and S. Kenig, "Life Expectation of Polycarbonate, " Polymer Engineering and Science, Vol.25, 1985, pp.535-540.
4. M. C. Boyce, E. M. Arruda and R. Cayachandran, "The Large Strain Compression, Tension, and Simple Shear of Polycarbonate," Polymer Engineering and Science, Vol.34, 1994, pp.716-725.
5. A. M. Dekker and M. I. Isayev, "Injection and Compression Molding Fundamentals," New York, 1987, pp.264-273.
6. P. Wippenbeck, "The Mould Filling Process Technical Requirements and Findings," 1990, pp.97-139.
7. R. Greco and A. Sorrentino, "Polycarbonate/ABS Blends: A Literature Review, "Advance in Polymer Technology, Vol.13, No.4, 1994, pp.249-258.
8. I. Babbar and G. N. Mathur, "Rheological Properties of Blends of Polycarbonate with Poly(acrylonitrile butadiene styrene)," Polymer, Vol.35, No.12, 1994, pp.2631-2635.
8. I. Babbar and G. N. Mathur, "Rheological Properties of Blends of Polycarbonate with Poly(acrylonitrile butadiene styrene)," Polymer, Vol.35, No.12, 1994, pp.2631-2635.
10. M. A. Ramos, "Polypropylene/Low Density Polyethylene Blend Matrices and Short Glass Fiber Based Composites," Polymer Composites, Vol.12, 1991, pp.7-12.
10. M. A. Ramos, "Polypropylene/Low Density Polyethylene Blend Matrices and Short Glass Fiber Based Composites," Polymer Composites, Vol.12, 1991, pp.7-12.
12. J. K. Kocsis and K. Friedrich, "Fracture Behavior of Injection Molded Short and Long Glass Fiber Polymide 6.6 Composites," Composites Science and Technology, Vol.32, 1988, pp.293-325.
12. J. K. Kocsis and K. Friedrich, "Fracture Behavior of Injection Molded Short and Long Glass Fiber Polymide 6.6 Composites," Composites Science and Technology, Vol.32, 1988, pp.293-325.
12. J. K. Kocsis and K. Friedrich, "Fracture Behavior of Injection Molded Short and Long Glass Fiber Polymide 6.6 Composites," Composites Science and Technology, Vol.32, 1988, pp.293-325.
12. J. K. Kocsis and K. Friedrich, "Fracture Behavior of Injection Molded Short and Long Glass Fiber Polymide 6.6 Composites," Composites Science and Technology, Vol.32, 1988, pp.293-325.
12. J. K. Kocsis and K. Friedrich, "Fracture Behavior of Injection Molded Short and Long Glass Fiber Polymide 6.6 Composites," Composites Science and Technology, Vol.32, 1988, pp.293-325.
17. J. Kuczynski, R. W. Snyder and P. P. Podolak, "Physical Property Retention of PC/ABS Blends," Polymer Degradation and Stability, Vol.43, 1994, pp.285-291.
17. J. Kuczynski, R. W. Snyder and P. P. Podolak, "Physical Property Retention of PC/ABS Blends," Polymer Degradation and Stability, Vol.43, 1994, pp.285-291.
19. D. D. Huang, "The Application of Fracture Mechanics to Materials Selection," Polymer Engineering and Science, Vol.36, No.18, 1996, pp.2270-2274.
19. D. D. Huang, "The Application of Fracture Mechanics to Materials Selection," Polymer Engineering and Science, Vol.36, No.18, 1996, pp.2270-2274.
19. D. D. Huang, "The Application of Fracture Mechanics to Materials Selection," Polymer Engineering and Science, Vol.36, No.18, 1996, pp.2270-2274.
19. D. D. Huang, "The Application of Fracture Mechanics to Materials Selection," Polymer Engineering and Science, Vol.36, No.18, 1996, pp.2270-2274.
23. N. Nishihata, T. Koizumi, Y. Ichikawa, and T. Katto, "Plane Strain Fracture Toughness of Polyphenylene Sulfide," Polymer Engineering and Science, Vol.38, No.3, 1998, pp.403-408.
24. K. S. Saib, W. J. Evans, D. H. Isaac, "Role of Microstructure During Fatigue Crack Growth in Poly(aryl ether ketone) (PEEK)," Polymer, Vol.34, No.15, 1993, pp.3198-3203.
25. M. Brillhart and J. Botsis, "Fatigue Crack Growth Analysis in PEEK," International Journal of Fatigue, Vol.16, 1994, pp.134-140.
25. M. Brillhart and J. Botsis, "Fatigue Crack Growth Analysis in PEEK," International Journal of Fatigue, Vol.16, 1994, pp.134-140.
27. L. Pruitt and S. Suresh, "Cyclic Stress Fields Ahead of Tension Fatigue Cracks in Amorphous Polymers," Polymer, Vol.35, No.15, 1994, pp.3221-3229.
28. G. C. Adams, R. G. Bender, B. A. Crouch and J. G. Williams, "Impact Fracture Toughness Tests on Polymer," Polymer Engineering and Science, Vol.30, 1990, pp.241-248.
29. D. F. Adams and J. D. Winkel, "Instrumented Drop Weight Impact Testing of Cross Ply and Fabric Composites," Composites, Vol.16, 1985, pp.268-278.
30. D. F. Adams and D. A. Wyrick, "Damage Sustained by a Carbon/Epoxy Composite Material Subjected to Repeated Impact," Composites, Vol.19, 1988, pp.19-27.
30. D. F. Adams and D. A. Wyrick, "Damage Sustained by a Carbon/Epoxy Composite Material Subjected to Repeated Impact," Composites, Vol.19, 1988, pp.19-27.
32. D. M. Bigg, "The Impact Behavior of Thermoplastic sheet Composites," Journal of Reinforced Plastics and Composites, Vol.13, 1994, pp.339-354.
32. D. M. Bigg, "The Impact Behavior of Thermoplastic sheet Composites," Journal of Reinforced Plastics and Composites, Vol.13, 1994, pp.339-354.
34. B. P. Jang, W. Kowbel and B. Z. Jang, "Impact Behavior and Impact Fatigue Testing of Polymer Composites," Composites Science and Technology, Vol.44, 1992, pp.107-118.
35. C. Lhymn, "Impact Fatigue of PPS/Glass Composites," Journal of Materials Science Letters, Vol.4, 1985, pp.1221-1224.
35. C. Lhymn, "Impact Fatigue of PPS/Glass Composites," Journal of Materials Science Letters, Vol.4, 1985, pp.1221-1224.
35. C. Lhymn, "Impact Fatigue of PPS/Glass Composites," Journal of Materials Science Letters, Vol.4, 1985, pp.1221-1224.
38. Golovoy, "The Influence of Velocity on the Impact Strength of Glass Reinforced Polypropylene," Polymer Composites, Vol.7, 1986, pp.405-412.
39. C. Lhymn, "Impact Fatigue of PPS/Glass Composites Microscopy," Journal of Materials Science Letters, Vol.4, 1985, pp.1429-1433.
39. C. Lhymn, "Impact Fatigue of PPS/Glass Composites Microscopy," Journal of Materials Science Letters, Vol.4, 1985, pp.1429-1433.
39. C. Lhymn, "Impact Fatigue of PPS/Glass Composites Microscopy," Journal of Materials Science Letters, Vol.4, 1985, pp.1429-1433.
39. C. Lhymn, "Impact Fatigue of PPS/Glass Composites Microscopy," Journal of Materials Science Letters, Vol.4, 1985, pp.1429-1433.
43. H. Mavridis, A. N. Hrymak. and J. Vlachopoulos, "Finite Element Simulation of Fountain Flow in Injection Molding," Polymer Engineering and Science, Vol.26, 1986, pp.449-454.
44. M. R. Kamal, S. K. Goyal and E. Chu, "Simulation of Injection Mold Filling of Viscoelastic Polymer with Fountain Flow," AICHE Journal, Vol.34, 1988, pp.94-106.
45. R. E. Hayes, H. H. Dannelongue and P. A. Tanguy, "Numerical Simulation of Mold Filling in Reaction Injection Molding," Polymer Engineering and Science, Vol.31, 1991, pp.842-848.
46. C. G. Gogos and C. F. Huang, "The Process of Cavity Filling Including the Fountain Flow in Injection Molding," Polymer Engineering and Science, Vol.26, 1986, pp.1457-1466.
46. C. G. Gogos and C. F. Huang, "The Process of Cavity Filling Including the Fountain Flow in Injection Molding," Polymer Engineering and Science, Vol.26, 1986, pp.1457-1466.
48. X. Jin, "Boundary Element Study on Particle Orientation Caused by the Fountain Flow in Injection Molding," Polymer Engineering and Science, Vol.33, 1993, pp.1238-1242.
49. A.N. Alexandrou and A. Ahmed, "Injection Molding Using a Generalized Eulerian Lagrangian Formulation," Polymer Engineering and Science, Vol.33, 1993, pp.1055-1064.
49. A.N. Alexandrou and A. Ahmed, "Injection Molding Using a Generalized Eulerian Lagrangian Formulation," Polymer Engineering and Science, Vol.33, 1993, pp.1055-1064.
49. A.N. Alexandrou and A. Ahmed, "Injection Molding Using a Generalized Eulerian Lagrangian Formulation," Polymer Engineering and Science, Vol.33, 1993, pp.1055-1064.
49. A.N. Alexandrou and A. Ahmed, "Injection Molding Using a Generalized Eulerian Lagrangian Formulation," Polymer Engineering and Science, Vol.33, 1993, pp.1055-1064.
53. J. L. Deng, "Control Problems of Grey System," System and Control Letters, Vol.1, No.5, 1982.
54. J. L. Deng, "Introduction to Grey System," The Journal of Grey System, Vol.1, No.1, 1989, pp.1-24.
55. 鄧聚龍, "灰色系統理論教程," 華中理工大學出版社, 1992.
56. S. H. Chang, "Frequency Synthesizer Product or/and Process Optimization Using the Grey Relational Analysis," The Journal of Grey System, Vol.8, No.8, 1996, pp.235-260.
57. S. H. Chang, "ACURAD Die Casting Process Optimization using the Grey Relational Analysis Method Approach," The Journal of Grey System, Vol.8, No.3, 1996, pp.269-282.
57. S. H. Chang, "ACURAD Die Casting Process Optimization using the Grey Relational Analysis Method Approach," The Journal of Grey System, Vol.8, No.3, 1996, pp.269-282.
59. A. A. Griffith, "The Phenomena of Rupture and Flow in Solids," Philosophical Transaction Royal Society of London, A221, 192, pp.163-197.
60. G. R. Irwin, "Fracture Dynamics in Fracturing of Metals," American Society for Metals, Cleveland, 1949.
61. T. L. Anderson, "Fracture Mechanics Fundamentals and Applications," CRC Press Inc., 1991, pp.360-375.
62. R. J. Oxborough, and P. B. Bowden, "A General Critical Strain Criterion for Crazing in Amorphous Glassy Polymers," Philosophical Magazine, Vol.28, 1973, pp.547-559.
63. D. S. Dugdale, "Yielding in Steel Sheets Containing Slits," Journal of the Mechanics and Physics of Solids”, Vol.8, 1963, pp.100-104.
64. G. I. Barenblatt, "The Mathematical Theory of Equilibrium Cracks in Brittle Fracture," Advances in Applied Mechanics, Vol. VII, Academic Press, 1962, pp.55-129.
65. P. C. Paris and F. Erdogan, "A Critical Analysis of Crack Propagation Law," Transaction ASME, Journal of Basic Engineering, Vol.85, 1963, pp.528-534.
65. P. C. Paris and F. Erdogan, "A Critical Analysis of Crack Propagation Law," Transaction ASME, Journal of Basic Engineering, Vol.85, 1963, pp.528-534.
67. D. M. Bigg and E. J. Bradbury, "The Impact Performance of Thermoplastic Sheet Composites," Polymer Engineering and Science, Vol.32, 1992, pp.287-297.
68. B. P. Jang, W. Kowbel and B. Z. Jang, "Impact Behavior and Impact Fatigue Testing of Polymer Composites," Composites Science and Technology, Vol. 44, 1992, pp. 107-118.
69. S. M. Lee and P. Zahuta, "Instrumented Impact and Static Indentation of Composites," Journal of Composite Materials, Vol.25, 1991, pp.205-222.
70. P. O. Sjoblom and J. T. Hartness, "On Low Velocity Impact Testing of Composite Materials," Journal of Composite Materials, Vol.22, 1988, pp.30-47.
70. P. O. Sjoblom and J. T. Hartness, "On Low Velocity Impact Testing of Composite Materials," Journal of Composite Materials, Vol.22, 1988, pp.30-47.
72. C. Lhymn, "Damage Accumulation and Wear of Fibrous Composites," Advances in Polymer Technology, Vol.7, 1987, pp.279-293.
73. "Typical Properties of Cycoloy," Wah Lee Industrial Corporation.
74. "Standard Test Method for Tensile Properties of Plastics," Annual Book of ASTM Standards, D638-91.
75. "Standard Test Method for Plan Strain Fracture Toughness of Metallic Materials," Annual Book of ASTM Standards, E399-83.
76. "Standard Test Method for Measurement of Fatigue Crack Growth Rates," Annual Book of ASTM Standards, D647-88a.
77. "Standard Test Methods for Impact Resistance of Plastics and Electrical Insulating Materials," Annual Book of ASTM Standards, D5628-96.
78. M. Akay, S. Ozden, T. Tansey, "Prediction of Process Induced Warpage in Injection Molded Thermoplastics," Polymer Engineering and Science, Vol.36, No.13, 1996, pp.1839-1846.
78. M. Akay, S. Ozden, T. Tansey, "Prediction of Process Induced Warpage in Injection Molded Thermoplastics," Polymer Engineering and Science, Vol.36, No.13, 1996, pp.1839-1846.
80. H. T. Pham, C. P. Bosnyak, K. Sehanobish, "Residual Stresses in Injection Molded Polycarbonate Rectangular Bars," Polymer Engineering and Science, Vol.33, No.24, 1993, pp.1634-1643.
81. G. Titomanlio, K. M. B. Jansen, "In Mold Shrinkage and Stress Prediction in Injection Molding," Polymer Engineering and Science, Vol.36, No.15, 1996, pp.2041-2049.
82. 唐玉柱, "射出成型條件對破壞韌性及裂縫成長之影響," 國立中央大學機械研究所碩士論文, 1992.
82. 唐玉柱, "射出成型條件對破壞韌性及裂縫成長之影響," 國立中央大學機械研究所碩士論文, 1992.
82. 唐玉柱, "射出成型條件對破壞韌性及裂縫成長之影響," 國立中央大學機械研究所碩士論文, 1992.
85. A. C. Roulin Moloney, "Fractography and Failure mechanisms of Polymers and Composites," Elsevier Science Publishers Ltd., Walter Doll, 1989, pp.387-436.
85. A. C. Roulin Moloney, "Fractography and Failure mechanisms of Polymers and Composites," Elsevier Science Publishers Ltd., Walter Doll, 1989, pp.387-436. |