參考文獻 |
[1] A. J. Sedriks, Corrosion of Stainless Steels, 2nd ed., John Wiley & Sons, Inc., New
York, USA, 1996, p. 13.
[2] W. F. Smith, Structure and Properties of Engineering Alloys, 2nd ed., McGraw-Hill,
Inc., New York, USA, 1993, p.312.
[3] Metals Handbook, Vol. 1: Properties and Selection: Irons, Steels, and
High-Performance Alloys, 10th ed., ASM, Materials Park, OH, USA, 1990.
[4] I. Ben-Haroe, A. Rosen, and I. W. Hall, “Evolution of Microstructure of AISI 347
Stainless Steel During Heat Treatment,” Materials Science and Technology, Vol. 9,
1993, pp. 620-626.
[5] O. Wachter and G. Brummer, “Experiences with Austenitic Steels in Boiling Water
Nuclear Engineering and Design, Vol. 168, 1997, p. 35-52.
[6] 林金福, 胥耀華, 彭文福, “核三廠二號機RCP 軸及鍵槽龜裂肇因分析,” 核能研
究報告INER-T2461, 1998.
[7] M. R. Bayoumi, “Fatigue Behavior of a Commercial Aluminum Alloy in Sea Water at
Engineering Fracture Mechanics, Vol. 45, 1993, pp.
297-307.
[8] S. Suresh, Fatigue of Materials, Cambridge University Press, New York, USA, 1991,
Chapter 12.
[9] F. P. Ford and M. Silverman, Mechanistic Aspects of Environment-Controlled Crack
Propagation in Steel/Aqueous Environment System, Report No. HTGE-451-8-12,
General Electric Company, Schenectady, New York, USA, 1979.
[10] K. N. Krishnan, “Mechanism of Corrosion Fatigue in Super Duplex Stainless Steel in
International Journal of Fracture, Vol. 88, 1997, pp.
205-213.
[11] K. J. Miller and R. Akid, “The Application of Microstructural Fracture Mechanics to
Various Metal Surface States,” Proceedings of the Royal Society of London, Series
A, Mathematical and Physical Sciences, Vol. 452, 1996, pp. 1411-1432.
[12] R. Akid and G. Murtaza, “Environment Assisted Short Crack Growth Behaviour of a
High Strength Steel,” pp. 193-207 in Short Fatigue Cracks, ESIS 13, Mechanical
Engineering Publications, London, UK, 1992.
[13] D. J. Duquette, “A Review of Aqueous Corrosion Fatigue,” pp.12-24 in Corrosion
Fatigue: Chemistry, Mechanics and Microstructure, Edited by O. Devereux, A. J.
Evily, and R. W. Staehle, National Association of Corrosion Engineers, Houston,
USA, 1971.
[14] 柯賢文, 腐蝕及其防制, 全華科技出版社, 台北, 1995, pp. 127-135.
[15] 左景伊, 應力腐蝕破裂, 西安交通大學出版社, 陝西西安, 1985.
38
[16] R. P. Wei and G. W. Simmons, “Recent Progress in Understanding Environment
Assisted Fatigue Crack Growth,” International Journal of Fracture, Vol. 17, 1981,
pp. 235-247.
[17] Y. R. Qian and J. R. Cahoon, “Crack Initiation Mechanisms for Corrosion Fatigue of
Corrosion, Vol.53, 1997, pp. 129-135.
[18] P. K. Liaw, L. Roth, A. Saxena, and J. D. Landes, “Influence of Environment on
Fatigue Crack Growth Rates in an Austenitic Steel,” Scripta Metallurgica, Vol. 17,
1983, pp. 611-614.
[19] M. O. Speidel, “Non-Magnetizable Steels for Generator Gap Rings, Their Resistance
to Stress-Corrosion Cracking and Hydrogen Embrittlement,” p.203 in VGB
Conference on Materials and Welding Techniques in the 1980 Power Stations,
1980.
[20] M. W. Mahoney and N. E. Paton, “The Influence of Gas Environments on Fatigue
Crack Growth Rates in Types 316 and 321 Stainless Steel”, Nuclear Technology,
Vol. 23, 1974, pp. 290-297.
[21] P. Shahinian, H. E. Watson and H. H. Smith, “Fatigue Crack Growth in Selected
Alloys for Reactor Applications,” Journal of Materials, Vol. 7, 1972, pp. 527-535.
[22] L. Hagn, “Results of Corrosion Fatigue Tests with Blade Materials,” pp. 2.86-2.136 in
Corrosion Fatigue of Steam Turbine Blade Materials, Edited by R. I. Jaffee,
Pergamon Press, New York, USA, 1983.
[23] M. Gao, S. Chen, and R. P. Wei, “Crack Paths, Microstructure, and Fatigue Crack
Growth in Annealed and Cold-Rolled AISI 304 Stainless Steel,” Metallugrical
Transcations A, Vol. 23A, 1992, pp. 355-371.
[24] O. Jonas, “Characterization of Steam Turbine Environment and Selection of Test
Environment,” pp. 3.35-3.74 in Corrosion Fatigue of Steam Turbine Blade
Materials, Edited by R. I. Jaffee, Pergamon Press, New York, USA, 1983.
[25] J. Mankowski and Z. S. Smialowska, “Studies on Accumulation of Chloride Ions in
Pits Growing During Anodic Polarization,” Corrosion Science, Vol. 15, 1975, pp.
493-501.
[26] S. Zhang, T. Shibata, and T. Haruna, “Contribution of Solution pH and Buffer
Capacity to Suppress Intergranular Stress Corrosion Cracking of Sensitized Type
304 Stainless Steel at 95℃,” Corrosion, Vol. 55, 1999, pp. 462-468.
[27] K. H. Mayer, “From Failure Statistics to Research Program Study of Corrosion
Fatigue Behavior Under Conditions of Incipient Steam Wetness,” pp. 2.1-2.18 in
Corrosion Fatigue of Steam Turbine Blade Materials, Edited by R. I. Jaffee,
Pergamon Press, New York, USA, 1983.
[28] S. Zhang, T. Shibata, and T. Haruna, “Inhibition Effect of the Borate Ion on
Intergranular Stress Corrosion Cracking of Sensitized Type 304 Stainless Steel,”
39
Corrosion, Vol. 54, 1998, pp. 428-434.
[29] K. Fujiwara, H. Tomari, K. Shimogori, and T. Fukuzuka, “An Electrochemical Study
on the Role of Dissolved Oxygen in the IGSCC of Sensitized Type 304 Stainless
Steel in Dilute Na2SO4 Solution at 285℃,” Corrosion, Vol. 38, 1982, pp. 69-76.
[30] H. K. Juang and C. Altstetter, “Effect of pH and Chloride Contents on Stress
Corrosion Cracking of Austenitic Stainless Steels at Room Temperture,” Corrosion,
Vol. 46, 1990, pp. 881-887.
[31] 范萬昌, “不同環境下之Custom 450 不銹鋼腐蝕疲勞性質研究,” 國立中央大學機
械工程研究所碩士論文, 2000.
[32] G. Sandoz, C. T. Fujii, and B. F. Brown, “Solution Chemistry Within
Stress-Corrosion Crack in Alloy Steels,” Corrosion Science, Vol. 10, 1970, pp.
839-845.
[33] K. Komai and K. Minoshima, “Dynamic and Cyclic Stress Corrosion Cracking
Resistance of Metals,” pp. 373-389 in Advanced Materials for Severe Service
Applications, Edited by K. Iida and A. J. McEvily, Elsevier Applied Science, New
York, USA, 1986.
[34] S. Hattori and T. Okada, “Corrosion Fatigue Crack Initiation Behavior of a Structural
Steel in Salt Solution with Various Concentrations,” pp. 1617-1623 in Fatigue 90,
Vol. 3, Edited by H. Kitagawa and T. Tanaka, Materials and Component
Engineering Publications Ltd, Birmingham, UK, 1990.
[35] H. Ouchi, J. Kobayashi, I. Soya, and K. Okamoto, “Fatigue Crack Growth in a High
Tensile Strength Steel in Seawater and Several Other Environments,” ISIJ
International, Vol. 34, 1994, pp. 451-459.
[36] C. T. Fujii and J. A. Smith, “Environmental Influences on the Aqueous Fatigue Crack
Growth Rates of HY-130 Steel,” pp. 390-402 in Corrosion Fatigue: Mechanics,
Metallurgy, Electrochemistry, and Engineering, ASTM STP 801, Edited by T. W.
Crooker and B. N. Leis, American Society for Testing and Materials, Philadelphia,
USA, 1983.
[37] 田永奎, 金屬腐蝕與防護, 機械工業出版社, 北京, 1995.
[38] J. D. Atkinson, J. Yu, Z. Y. Chen, and Z. J. Zhao, “Modelling of Corrosion Fatigue
Crack Growth Plateaux for RPV Steels in High Temperature Water,” Nuclear
Engineering and Design, Vol. 184, 1998, pp. 13-25.
[39] Y. Nakai, K. Tanaka, and R. P. Wei, “Short-Crack Growth in Corrosion Fatigue for a
High Strength Steel,” Engineering Fracture Mechanics, Vol. 24, 1986, pp. 433-444.
[40] R. P. Wei, “Some Aspects of Environment-Enhanced Fatigue Crack Growth,”
Engineering Fracture Mechanics, Vol. 1, 1970, pp. 633-651.
[41] D. P. Schweinsberg, B. Sun, M. Cheng, and H. Flitt, “Potentiodynamic Estimation of
Sensitization of 347 Grade SS Superheater Tubes, Part Ⅰ: Effect of Surface Finish,
40
Scan Rate and Solution Temperature,” Journal of Applied Electrochemistry, Vol. 23,
1993, pp. 1097-1101.
[42] D. P. Schweinsberg, B. Sun, V. Otieno-Alego, “Corrosion and Inhibition of Aged 347
Grade Stainless Steel Boiler Tubes”, Journal of Applied Electrochemistry, Vol. 24,
1994, pp. 803-807.
[43] V. V. Panasyuk and L. V. Ratych, “The Methodology of Estimating Inhibitor
Effectiveness in Corrosion Fatigue Crack Propagation,” Corrosion Science, Vol. 37,
1995, pp. 391-412.
[44] L. V. Ratych and I. M. Slobodyan, Fiziko-Khimicheskaya Mekhanika Materialov, Vol.
23, 1987, p. 7. (In Russian)
[45] I. L. Rosenfeld, V. P. Persinanceva, and V. A. Marichev, Zashchita Metallov, Vol. 14,
1978, p. 723. (In Russian)
[46] P. C. Paris and F. Erdogan, “A Critical Analysis of Crack Propagation Laws,” Journal
of Basic Engineering, Vol. 85, 1960, pp. 528-534.
[47] W. Elber, “Fatigue Crack Clousure Under Cyclic Tension,” Engineering Fracture
Mechanics, Vol. 2, 1970, pp. 37-45.
[48] S. Suresh and R. O. Ritchie, “Propagation of Short Crac International Metals
Reviews, Vol. 29, 1984, pp. 445-476.
[49] A. K. Vasudeven, K. Sadanandam, and N. Louat, “A Review of Crack Closure,
Fatigue Crack Threshold and Related Phenomena,” Materials Science and
Engineering, Vol. A188, 1994, pp. 1-22.
[50] S. Suresh and R. O. Ritchie, “On the Influence of Environment on the Load Ratio
Dependence of Fatigue Thresholds in Pressure Vessel Steel,” Engineering Fracture
Mechanics, Vol. 18, 1983, pp. 785-800.
[51] Y. G. Chun, S. I. Pyun, and S. M. Lee, “The Influence of Loading Frequency on the
Fatigue Crack Propagation Behaviour of Al-Zn-Mg Alloy at Low Cyclic Stress
Intensity Level in 3.5 wt% NaCl Solution,” Journal of Materials Science Letters,
Vol. 10, 1991, pp. 1439-1442.
[52] R. Ayer, C. F. Klein, and C. N. Marzinsky, “Instabilities in Stabilized Austenitic
Stainless Steels,” Metallurgical Transactions A, Vol. 23A, 1992, pp. 2455-2467.
[53] J. Hickling and N. Wieling, “Electrochemical Investigations of the Resistance of
Inconel 600, Incoloy 800, and Type 347 Stainless Steel to Pitting Corrosion in
Faulted PWR Secondary Water at 150℃ to 250℃,” Corrosion, Vol. 37, 1981, pp.
147-152.
[54] D. P. Schweinsberg, B. T. Sun, M. Cheng and H. Flitt, “The Potentiodynamic
Estimation of the Degradation of 347 Grade SS Superheater Tubes, Ⅱ: The Effect
of Different Electrolytes,” Corrosion Science, Vol. 36, 1994, pp. 361-372.
[55] W. Tyson, “Embrittlement of Types 316L and 347 Weld Overlay by Post-Weld Heat
41
Treatment and Hydrogen,” Metallurgical Transactions A, Vol. 15, 1984, pp.
1475-1484.
[56] P. Rozenak and D. Eliezer, “Effects of Metallurgical Variables on Hydrogen
Embrittlement in AISI Type 316, 321 and 347 Stainless Steels,” Materials Science
and Engineering, Vol. 61, 1983, pp. 31-41.
[57] P. Rozenak and D. Eliezer, “Behavior of Sensitized AISI Types 321 and 347
Austenitic Stainless Steels in Hydrogen,” Metallurgical Transactions A, Vol. 20,
1989, pp. 2187-2190.
[58] P. Rozenak, “Effects of Nitrogen on Hydrogen Embrittlement in AISI Type 316, 321
and 347 Austenitic Stainless Steels,” Journal of Materials Science, Vol. 25, 1990,
pp. 2532-2538.
[59] D. N. Gladwin, R. H. Priest and D. A. Miller, “Examination of Fatigue and
Creep-Fatigue Crack Growth Behavior of Aged Type 347 Stainless Steel Weld
Metal at 650℃,” Materials Science and Technology, Vol. 5, 1989, pp. 40-51.
[60] B. A. Senior, “Cavitational Damage in AISI Type 347 Weld Metal Arising from
Materials Science and Engineering A, Vol. 130, 1990, pp.
51-59.
[61] B. A. Senior, J. Maguire and C. A. Evans, “Effects of Dwell Time on the Creep
Damage Generated in AISI Type 347 Weld and 1CrMoV Steel During Creep
Fatigue Loading,” Materials Science and Engineering A, Vol. 138, 1991, pp.
103-107.
[62] S. R. Ortner and C. A. Hippsley, “High Temperature Brittle Intergranular Failure in
Austenitic Stainless Steels,” Materials Science and Technology, Vol. 8, 1992, pp.
883-895.
[63] S. R. Ortner and C. A. Hippsley, “Effect of Aging on High Temperature Brittle
Intergranular Fracture in Austenitic Stainless Steels,” Materials Science and
Technology, Vol. 11, 1995, pp. 883-895.
[64] “Standard Practice for Conducting Constant Amplitude Axial Fatigue Tests of
ASTM E466-96, Annual Book of ASTM Standards, Vol. 3.01,
American Society for Testing and Materials, West Conshohocken, PA, USA, 1998,
pp. 471-475.
[65] “Standard Test Method for Measurement of Fatigue Crack Growth Rates
E647-95a, Annual Book of ASTM Standards, Vol. 3.01, American Society for
Testing and Materials, West Conshohocken, PA, USA, 1998, pp. 562-598.
[66] R. Akid and K. J. Miller, “The Effect of Solution pH on the Initiation and Growth of
-1409 in Fracture Behavior and Design of
Materials and Structures, Vol. 3, Engineering Materials Advisory Services Ltd.,
UK, 1990.
42
[67] 王鎮和, “不同環境下之沃斯回火球墨鑄鐵疲勞裂縫成長行為,” 國立中央大學機
械工程研究所碩士論文, 2000.
[68] C. Fong and D. Tromans, “High Frequency Stage I Corrosion Fatigue of Austenitic
Metallurgical Transctions A, Vol. 19A, 1988, pp. 2753-2764.
[69] W. H. Hartt, J. S. Tennant, and W. C. Hooper, “Solution Chemistry Modification
within Corrosion-Fatigue Cracks,” pp. 5-18 in Corrosion-Fatigue Technology,
ASTM STP 642, Edited by H. L. Craig, Jr., T. W. Crooker, and D. W. Hoeppner,
American Society for Testing and Materials, Philadelphia, PA, USA, 1976. |