具自行對準凹陷電極1x4矽質金屬-半導體-金屬光偵測器陣列的特性

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：26

、訪客IP：3.139.234.124

姓名

賴威任(Wei-Jen Lai ) 查詢紙本館藏

畢業系所

電機工程研究所

論文名稱

具自行對準凹陷電極1x4矽質金屬-半導體-金屬光偵測器陣列的特性
(Characteristics of 1x4 Si MSM-PD Array With Self-Aligned Trench Electrodes)

相關論文

★ 金屬-半導體-金屬光偵測器的特性	★ 非晶質氮化矽氫基薄膜發光二極體與有機發光二極體的光電特性
★ 具非晶質n-i-p-n層之氧化多孔矽發光二極體的光電特性	★ 低漏電流與高崩潰電壓大面積矽偵測器製程之研究
★ 非晶矽射極異質雙載子電晶體與有機發光二極體的特性	★ 吸光區累崩區分離的累崩光二極體
★ 蕭特基源/汲極接觸的反堆疊型非晶質矽化鍺薄膜電晶體	★ 矽晶圓上具有隔離氧化層非晶質薄膜發光二極體之光電特性
★ 具非晶異質接面及溝渠式電極之矽質金屬-半導體-金屬光偵測器的暗電流特性	★ 非晶矽/晶質矽異質接面矽基金屬-半導體-金屬光檢測器與具非晶質無機電子/電洞注入層高分子發光二極體之研究
★ 具非晶質矽合金類量子井極薄障層之高靈敏度平面矽基金屬–半導體–金屬光檢測器	★ 具蕭特基源/汲極的上閘極型非晶矽鍺與多晶矽薄膜電晶體
★ 大面積矽偵測器的製程改良與元件設計	★ 具組成梯度能隙非晶質矽合金電子注入層與電洞緩衝層的高分子發光二極體
★ 非晶質吸光區與累增區分離之類超晶格累崩光二極體	★ 具非晶質矽合金調變週期類超晶格薄膜複層之低暗電流高熱穩定度平面矽基金屬–半導體–金屬光檢測器

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

由於光纖通訊的蓬勃發展，光偵測器的需求量大增。過去大部分的光接收器皆採用三五族半導體材料，但此材料與矽質光電積體電路在製程整合上頗困難，若能以目前產業主流的矽材質製作光偵測器，則此整合性的問題即可迎刃而解。
本論文的主題是利用自動對準製程製作具凹陷電極及非晶矽氫薄膜的一列四行金屬-半導體-金屬光偵測器陣列，並且探討其交、直流特性及各頻道間的交越失真，以利光偵測器的實際運用。

摘要(英)

In this thesis, the 1x4 Si metal-semiconductor-metal photodetector (MSM-PD) array with self-aligned trench-electrodes had been fabricated on a [100] p-type silicon wafer successfully. Self-alignment technique was used to reduce the needed mask levels and form a better alignment between metal and amorphous Si films.
The obtained device had the higher responsivity and faster response speed than those of conventional planar Si MSM-PDs with non-self-aligned trench-electrodes. The responsivity of the device with self-aligned trench-electrodes was 0.30 A/W, which was higher than that (0.15 A/W) of the conventional planar one having no trench. The device knee voltage was decreased from 5 V to less than 1 V by using self-aligned trench-electrodes, and the FWHM (full width at half maximum) of temporal response was reduced from 66.6 ps to 56.0 ps. This would be due to the self-aligned trench-electrodes resulting in a more uniform lateral electric field in the light absorption region of device.
Cross-talks among channels were not obvious because of the employed properly recessed isolation lanes. Different finger spacings and widths of interdigitated electrodes resulted in different responsivities of the MSM-PDs. The narrower the finger spacings and widths, the higher the device responsivity due to the larger device effective active area.
The obtained 1x4 Si MSM-PD array with self-aligned trench-electrodes had good characteristics and could easily be integrated with Si OEIC (Opto-Electronic IC). It was expected that the MSM-PD array would be used in optical fiber communication system.

關鍵字(中)

★ 光偵測器
★ 凹陷電極
★ 矽質
★ 自行對準
★ 陣列
★ 非晶矽

關鍵字(英)

★ amorphous Si
★ array
★ MSM
★ photodetector
★ self-aligned
★ trench electrodes

論文目次

Abstract……………………………………………………….…….…(Ⅲ)
Table Caption……..………………………………………………….(V)
Figure Captions………………………………………………………..(VI)
Chapter 1 INTRODUCTION………………..…………….…………1
Chapter 2 DEVICE OPERATION PRINCIPLES AND
FABRICATION PROCESSES……………………………7
2-1Operation Principles of MSM-PD…………………..7
2-2Array Fabrication Processes……………………….12
Chapter 3 MEASUREMENT TECHNIQUES……………....……..21
3-1Responsivity……………..……………..………...21
3-2 Response Speed…….……….………………..……21
Chapter 4 EXPERIMENTAL RESULTS AND DISCUSSIONS….25
4-1Design and Process Considerations…………….….25
4-2DC Response of 1x4 MSM-PD Array……………..26
4-3AC Response of 1x4 MSM-PD Array……………..31
4-4Cross-Talks Among Channels……………..………36
4-5Dark-Current Comparison Between Devices with Self-Aligned and Non-Self-Aligned Trench-electrodes…………………………………………...37
4-6DC Response of Devices with Different Finger Spacings and Widths…………………………..…...37
Chapter 5 CONCLUSIONS…………………………………………..45
REFERENCES……………………………………………………….….47

參考文獻

[1]P. D. Hodson, R. H. Wallis, J. I. Davies, and H. E. Shephard, "InGaAs PIN Photodiodes on Recessed Semi-Insulating GaAs Substrates," IEE Proceeding- J, vol. 135, no. 1, pp. 2-4, 1988.
[2]K. Wakita, I. Iotaka, K. Mogi, and Y. Kawamura, "High-Speed AlGaAs Multiple Quantum Well PIN Photodiodes," Electronics Letters, vol. 25, no. 22, pp. 1533-1534, 1989.
[3]Q. Wada, S. Miura, T. Mikawa, O. Aoki, and T. Kiyomga, "Fabrication of Monolithic Twin-GaInAs PIN Photodiode for Balanced Dual-Detector Optical Coherent Receivers," Electronics Letters, vol. 24, no. 9, pp. 514-516, 1988.
[4]T. Kakawa, N. Matsumoto, and K. Kumabe, "Amorphous Silicon Photoconductive Sensor," Jpn. J. Appl. Phys., vol. 21, Suppl. 12-1, pp. 251-256, 1981.
[5]Y. K. Fang, S. B. Hwang, K. H.Chen, C. R. Liu, and L. C. Kuo, "A Metal-Amorphous-Silicon-Germanium Alloy Schottky Barrier for Infrared Optoelectronic IC on Glass Substrate Application," IEEE Trans. Electron Devices, vol. 39, pp. 49-51, 1992.
[6]C. Y. Chang, B. S. Wu, Y. K. Fang, and R. H. Lee, " Amorphous Silicon Bulk Barrier Phototransistor with Schottky Barrier Emitter." Appl. Phys. Lett., vol. 47, pp. 49-51, 1985.
[7]S. B. Hwang, Y. K. Fang, K. H. Chen, C. R. Liu, J. D. Hwang, and M. H. Chou, "An a-Si:H/a-SiGe:H Bulk Barrier Phototransistor with an a-SiC:H Barrier Enhancement Layer for High-gain IR Optical Detector," IEEE Trans. Electron Devices, vol. 40, no. 2, pp. 342-347, 1993.
[8]S. Takayama, K. Mori, K.Suzuki, and C. Tanuma, "An a-Si:H Photoconductive Sensor with Al Gate Electrode," IEEE Trans. Electron Devices, vol. 40, no. 2, pp. 342-347, 1993.
[9]J. W. Hong, W. L. Laih, Y. W. Chen, Y. K. Fang, C. Y. Chang, and J. Gong, "Optical and Noise Characteristics of Amorphous Si/SiC Superlattice Reach-Through Avalanche Photodidoes," IEEE Trans. Electron Devices, vol. 37, no. 8, pp. 1804-1808, 1990.
[10]Y. K. Fang, S. B. Hwang, K. H. Chen, C. R. Liu, M. J. Tsai, and L. C. Kuo, "An Amorphous SiC/Si Heterojunction p-i-n Diode for Low-Noise and High-Sensitivity UV Detector," IEEE Trans. Electron Devices, vol. 39, no. 2, pp. 292-296, 1992.
[11]Dennis L. Rogers, Lightwave Technol., vol. 12, p. 625, 1991.
[12]Dennis L. Rogers, "Integrated Optical Receviers Using MSM Detectors," Journal of Lightwave Technology, vol.9, no.12, pp. 1635-1638, December 1991.
[13]Wen-Jeng Ho, Meng-Chyi Wu, and Yuan-Kuang Tu, “Uniform and High Performance of Monolithically Integrated 1x12 Array of Planar GaInAs Photodiodes,” IEEE Trans. Electron Devices, vol. 44, no. 4, pp.559-564, 1997.
[14]Y. Liu, S. R. Forrest, G. L. Tangonan, R. A. Jullens, R. Y. Loo, V. L. Jones, D. Persechini, J. L. Pikulski, and M. M. Johnson, “Very-high-bandwidth In0.53Ga0.47As p-i-n detector arrays,” IEEE Photon. Technol. Lett., vol. 3, pp. 931-933, 1991.
[15]M. Makiuchi, M. Norimatsu, T. Sakurai, K. Kondo, and M. Yano,” Flip-chip Planar GaInAs/InP p-i-n Photodiode array for Parallel Optical Transmission,” IEEE Photon. Technol. Lett., vol. 5, pp. 518-520, 1993
[16]S. M. Sze, Physics of Semiconductor Devices, John Wiley & Sons, Inc., 2nd ed, Chap.10, p. 613, 1985.
[17]A. Selvarajan, K. Shenai, Vijai K. Traipathi, Optoelectronics: Technologies and Applications, Chap. 10, pp. 211-218.
[18]S. Y. Wang, D. M. Bloom, and D. M. Collins, ”Ultrahigh Speed Photodetectors,” SPIE, vol. 439, pp. 178, 1993.
[19]H. Matsuura and H. Okushi, “Schottky Barrier Junction of Hydrogenated Amouphous Silicon-Germanium Alloys,” J. Appl. Phys. No. 62, pp. 2871-2875, 1987.
[20]M. Y. Liu, S. Y. Chou, S. Alexandrou, C. C. Wang and T. Y. Hsiang, ”110 GHz Si MSM Photodetectors,” IEEE Trans. Electron Devices, vol. 40, no. 11, pp. 2145-2146, 1995.
[21]L. H. Laih, “Fabrication and Characteristics of Si-Based Metal-Semiconductor-Metal Photodetectors,” Ph.D. Thesis, Institute of Electrical Engineering, National Central University, Chungli, Taiwan, Republic of China, 1999.
[22]T. C. Chang, "Characteristics of Metal-Semiconductor-Metal Photodetector (MSM-PDs) with Amorphous Heterojunction and Recessed or Ridged Cr Electrodes," Master Thesis, Institute of Electrical Engineering, National Central University, Chungli, Taiwan, Republic of China, 1997.
[23]C. H. Liao, “Characteristics of MSM Photodetectors,” Master Thesis, Institute of Electrical Engineering, National Central University, Chungli, Taiwan, Republic of China, 2000.
[24]K. E. Bean, “Anisotropic Etching of Silicon,” IEEE Trans. Electron Devices, vol. ED-25, no. 10, pp. 1185-1193, 1978.

指導教授

洪志旺(Jyh-Wong Hong)

審核日期

2001-7-5

推文