應用於股骨轉子間骨折回復手術之C-arm based 手術導引系統

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：129

、訪客IP：3.145.75.49

姓名

楊遠祥(Yuan-Hsiang Yung) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

應用於股骨轉子間骨折回復手術之C-arm based 手術導引系統
(C-arm based surgical navigation system applied for reduction of intertrochanteric fracture)

相關論文

★ 以擠製冷卻成型法結合相分離法製作神經再生用多孔性導管	★ 整合可調式阻力之手足復健機研究
★ 應用於肝腫瘤治療之超音波影像輔助機械臂HIFU燒灼實驗系統	★ 顱顏整型手術用植入物之設計與製作
★ 電腦輔助骨科手術用規劃及導引系統	★ 遠端遙控機械手臂腹腔鏡手術系統
★ 頭部CT與MR影像之融合	★ 手術用影像導引機械人定位及鑽孔系統
★ 機器人校正與醫學影像導引定位應用	★ 顱顏手術用規劃及導引系統
★ 醫學用超音波影像導引系統	★ 應用3D區域成長法於腦部磁共振影像之分割
★ 腦部手術用導引系統之方位校準及腦瘤影像分割	★ 超音波影像即時震波導引
★ 腫瘤偵測與顱顏骨骼重建	★ 骨科手術用C-arm影像輔助規劃及導引系統

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

近年來C-arm已成為骨科手術中最常被使用的工具之一。但是由於C-arm有限的視野以及二維影像的限制，使得醫生在為了得知器械與骨骼之空間關係的同時，必須拍攝大量的C-arm影像，造成承受高輻射劑量的風險。在股骨轉子間骨折回復手術中，最關鍵的步驟即為將Guide Pin從股骨外側以正確的方位鑽入股骨頭，此過程往往需要大量的C-arm影像進行確認。為改善C-arm使用上之缺點及立體定位的限制，本研究發展一套以C-arm影像為主的骨科手術導引系統，通過光學式定位裝置所提供之空間資訊以及模擬C-arm的投影成像過程，本系統能在手術中提供器械與骨骼的空間關係，並即時顯示在電腦螢幕上，以協助醫生能更準確進行鑽孔及後續置放植入物的動作。
本研究利用光學式定位裝置追蹤骨骼、器械與C-arm的空間關係，並將校正器裝設於C-arm接收端，通過其上的附加標記計算X光之有效發射源，以修正諸如重力等因素所造成的投影誤差，並建構X光投影模式。通過全域性法(Global Method)校正C-arm影像之針墊變形與S-shape扭曲變形，並利用投影幾何原理，以球體模擬股骨頭，在術中提供醫生器械鑽入深度之導引資訊。
本研究所發展之系統已進行過系統整體精度驗證之實驗，其定位精度為1.07±0.33mm、方向精度為1.92±1.28°，鑽入深度導引之平均誤差為0.61±0.27mm。

關鍵字(中)

★ C-arm
★ 手術導引系統
★ 影像扭正

關鍵字(英)

★ C-arm
★ Surgical navigation system
★ image dewarp

論文目次

摘要 I
目錄 II
圖目錄 IV
表目錄 VII
表目錄 VII
第一章序論 1
1-1 研究動機 1
1-2 文獻回顧 2
1-3 研究方法簡介 3
1-4 論文架構 6
第二章系統架構 7
2-1 硬體架構 7
2-1-1 光學式定位裝置 8
2-1-2 校正器 11
2-1-3 手術器械 11
2-2 軟體介紹 15
2-3 系統操作流程 15
第三章 C-arm影像校正與立體定位 22
3-1 座標系統定義 22
3-2 建立座標系統轉換關係 24
3-3 手術鑽頭座標系統及校正器座標系統對正 27
3-3-1 手術鑽頭座標系統對正 27
3-3-2 校正器座標系統對正 29
3-4 附加標記自動辨識 30
3-4-1 偵測影像圓形邊界 31
3-4-2 影像對比強化 32
3-4-3 辨識鋼珠位置 33
3-4-4 去除雜訊 35
3-5 影像扭曲與校正 36
3-6 建構投影模式 41
3-7 計算股骨頭近似球之球心與半徑 44
3-7-1 反投影計算股骨頭近似球之球心 45
3-7-2 計算股骨頭近似球半徑 48
第四章實驗結果與討論 51
4-1 影像扭正實驗 51
4-2 器械鑽入深度導引實驗 54
4-3 系統整體精度實驗 56
4-4 誤差分析 60
4-4-1 光學式定位裝置誤差 60
4-4-2 校正器座標系統誤差 60
4-4-3 附加標記偵測誤差 62
4-4-4 影像扭正誤差 62
4-4-5 有效發射源計算誤差 62
4-4-6 人為操作誤差 63
第五章結論 65
參考文獻 67

參考文獻

[1] Barry, T. P., “Radiation exposure to an orthopedic surgeon,” Clin. Orthop., pp.182:160-163, 1993.
[2] Canny, J., “A computational approach to edge detection,” IEEE Transactions on Pattern Analysis and Machine Intelligence, Volume 8, Issue 6, pp. 679 – 698, November 1986.
[3] Cerveri, P., Forlani, C., Borghese, N. A., et. al., “Distortion correction for x-ray image intensifiers: local unwarping polynomials and RBF neural networks,” pp. 1759-71, Med Phys., 2002.
[4] Chen, T. C. and Chung, K. L., “An efficient randomized algorithm for detecting circles,” Computer Vision and Image Understanding, Vol. 83, pp.172-191, 2001.
[5] Euler, E., Wirth, S., Pfeifer, K. J., et. al., “3D-imaging with an isocentric mobile C-arm,” Siemens electromedica Vol. 68, No. 2, pp.122-126, 2000.
[6] Gronenschild, E., Roos, J., and Mulkens, G., “The accuracy and reproducibility of an algorithm to correct for geometric image distortion in quantitative coronary angiography,” IEEE Conference Proceedings, Computers in Cardiology, pp. 105-108, 1996.
[7] Grützner, P. A.,Zhang, G.,Vock, B., et. al., “Computer-assisted osteosynthesis of long bone fractures,” Navigation and robotics in total joint and spine surgery, pp. 449-454, Springer, 2003.
[8] Hofstetter, R., Slomczykowski, M., Krettek, C., et. al., “Computer-assisted fluoroscopy-based reduction of femoral fractures and antetorsion correction,” Comput. Aided Surg., Vol. 5, pp. 311-25, 2000.
[9] Hofstetter, R., Slomczykowski, M., Sati, M., et. al., “Fluoroscopy as an imaging means for computer-assisted surgical navigation,” Comput Aided Surg., pp. 65-76, 1999.
[10] Jerome, L., “Programming with Intel IPP and Intel OpenCV under GNU Linux,” EII. Lab., Universite de Bourgogne, 2003.
[11] Joskowicz, L., Milgrom, C., Shoham, M., et. al.,“Robot-guided long bone intramedullary distal locking: concept and preliminary results,” Proc.3rd Int.Symp.Robotics and Automation, 2002, Toluca, Mexico.
[12] Joskowicz, L., Milgrom, C., Simkin, A., et. al.,“FRACAS: a system for computer-aided image-guided long bone fracture surgery,” Comput. Aided Surg., pp. 264-8, 1998.
[13] Lee, M. Y.,Kuo, C. H.,and Hung, S. S.,“Implementation of a sound-guided navigation system for tibial closed interlocking nail fixations in orthopedics,” J. of Medical and Biological Engineering, 24(3), pp. 147-153.
[14] Livyatan, H., Yaniv, Z., and Joskowicz, L., “Robust automatic C-arm calibration for fluoroscopy-based navigation: a practical approach,” Proc 5th Int. Conf. on Medical Image Computing and Computer-Aided Intervention, MICCAI’2002, October 2002, Tokyo, Japan.
[15] Lo, N. N.,Goh, P. S.,and Khong, K. S.,“Radiation dosage from use of the image intensifier in orthopaedic surgery,” Singapore Med. J., Vol. 37, pp. 69-71, 1996.
[16] Maleka, S., Phillipsa, R., Mohsenb, A., et. al.,“Validations of computer-assisted orthopaedic surgical system for insertion of distal locking screws for intramedullary nails,” International Congress Series Vol. 1268, pp. 614–619, 2004.
[17] NEMA standard publication PS3, NEMA, Marth 27, 1992.
[18] Sanders, R., Koval, K. J., DiPasquale, T., et. al., “Exposure of the orthopaedic surgeon to radiation,” J. Bone Joint Surg., 75-A, pp. 326-330, 1993.
[19] Schroeder, W. J. and Martin, K. M., “The visualization toolkit 3nd Ed. ,” Kitware Inc., 1999.
[20] Shoham, M.,Zehavi, E., Joskowicz, L., et. al., “Bone-mounted miniature robot for surgical procedures: concept and clinical applications,” IEEE Transactions on Robotics and Automation, vol. 19, no. 5, October 2003.
[21] Tockus, L., Joskowicz, L., Simkin, A., et. al., “Computer-aided image-guided bone fracture surgery:modeling,visualization,and preoperative planning,” Proceedings of the First International Conference on Medical Image Computing and Computer-Assisted Intervention, pp. 29-38, 1998.
[22] Viant, W. J., Phillips, R., Griffiths, J. G., et. al., “A computer assisted orthopaedic system for distal locking of intramedullary nails,” Medimec’95, September 1995, Bristol.
[23] Vincent, L., “Morphological grayscale reconstruction in image analysis: application and efficient algorithms,” IEEE Transactions on Image Processing, 2(2), pp. 176-201, April 1993.
[24] Yaniv, Z., Joskowicz, L., Simkin, A., et. al., “Fluoroscopic image processing for computer-aided orthopaedic surgery,”1st Int. Conf. on Medical Computing and Computer-Assisted Intervention (MICCAI), 1998.
[25] Zhu, Y., Phillips, R., Griffiths, J. G., et. al., “A mathematical model for acquiring a cone axis from x-ray images,” Proceedings of the IEEE International Conference on Robotics & Automation, May 1999.
[26] Zhu, Y., Phillips, R., Griffiths, J.G., et. al., “Recovery of distal hole axis in intraMedullary nail trajectory planning,” Proceedings of the IEEE International Conference on Robotics & Automation, pp. 21-26, May 2001.
[27] 王舜民, “骨科手術用C-arm影像輔助規劃及導引系統,” 碩士論文, 中央大學機械工程研究所, 2002.
[28] 吳吉春, 王舜民, 顏兆萱等, “骨科手術用C-arm 影像輔助導引系統之發展,” 中華民國九十二年度醫學工程年會論文集, pp. 44-45, 2003.

指導教授

曾清秀(Ching-Shiow Tseng)

審核日期

2005-7-27

推文