參考文獻 |
[1] W. J. Plumbridge, “Review: Solder in Electronics,” Journal of Materials Science, Vol. 31, 1996, pp. 2501-2514.
[2] M. McCormack and S. Jin, “New Lead-Free, Sn-Zn-In Solder Alloys,” Journal of Electronic Materials, Vol. 23, 1994, pp. 687-690.
[3] J. H. Vincent and G. Humpston, “Lead-Free Solders for Electronic Assembly,” GEC Journal of Research, Vol. 11, 1994, pp. 76-89.
[4] 馮克林, “檢談電子元件銲錫可靠度,” 工業材料, 第124期, 1997年, pp. 93-99.
[5] 菅沼 克昭, 鉛付技術, 工業調查會, 日本, 2001. (日文)
[6] S. K. Kang and A. K. Sarkhel, “Lead (Pb)-Free Solders for Electronic Packaging,” Journal of Electronic Materials, Vol. 23, 1994, pp. 701-707.
[7] M. McCormack and S. Jin, “New Lead-Free Solders,” Journal of Electronic Materials, Vol. 23, 1994, pp. 635-640.
[8] P. T. Vianco and D. R. Frear, “Issues in the Replacement of Lead-Bearing Solders,” JOM, Vol. 45, 1993, pp. 14-19.
[9] P. T. Vianco, “Solder Alloys: A Look at the Past, Present, and Future,” Welding Journal, Vol. 76, 1994, pp. 45-49.
[10] 詹益淇、莊東漢, “無鉛銲錫的回顧與最新發展,” 電子月刊, 第六卷, 第三期, 2000年, pp. 226-237.
[11] B. Trumble, “Get the Lead out,” IEEE Spectrum, Vol. 35, 1998, pp. 55-60.
[12] E. P. Wood and K. L. Nimmo, “In Search of New Lead-Free Electronic Solders,” Journal of Electronic Materials, Vol. 23, 1994, pp. 709-713.
[13] M. Abtew and G. Selvaduray, “Lead-Free Solders in Microelectronics,” Materials Science and Engineering R, Vol. 27, 2000, pp. 95-141.
[14] 張淑如, “鉛對人體的危害,” 勞工安全衛生簡訊, 第12期, 1995年, pp. 17-18.
[15] A. Z. Miric and A. Grusd, “Lead-Free Alloys,” Soldering and Surface Mount Technology, Vol. 10, 1998, pp. 19-25.
[16] M. Judd and K. Brindley, Soldering in Electronics Assembly, 2nd ed., Newnes, Oxford, 1999, pp. 83-84.
[17] Environmental Protection Agency, Comprehensive Review of Lead in the Environment under TSCA, 56FR 22096-98, 1991.
[18] IPC Roadmap for Lead-Free Electronic Assemblies, 2nd Draft, IPC, Northbrook, IL, November, 1999.
[19] IPC Roadmap: A Guide for Assembly of Lead-Free Electronics, 4th Draft, IPC, Northbrook, IL, June, 2000.
[20] 游善博, “錫鋅系無鉛銲錫與銅基材間附著性與界面反應之研究,” 國立成功大學材料科學及工程學系博士論文, 2000.
[21] Alloy Phase Diagrams, ASM Handbook, Vol. 3, ASM International, Materials Park, OH, 1992, pp. 2.1-2.25.
[22] M. McCormack and S. Jin, “Improved Mechanical Properties in New Pb-Free Solder Alloys,” Journal of Electronic Materials, Vol. 23, 1994, pp. 715-720.
[23] M. McCormack, S. Jin, G. W. Kammlott, and H. S. Chen, “New Pb-Free Solder Alloy with Superior Mechanical Properties,” Applied Physics Letters, Vol. 63, 1993, pp. 15-17.
[24] K. Suganuma, S. H. Huh, K. Kim, H. Nakase, and Y. Nakamura, “Effect of Ag Content on Properties of Sn-Ag Binary Alloy Solder,” Materials Transactions, JIM, Vol. 42, 2001, pp. 286-291.
[25] W. Yang, L. E. Feltion, and R. W. Messler “The Effect of Soldering Process Variables on the Microstructure and Mechanical Properties of Eutectic Sn-Ag/Cu Solder Joints,” Journal of Electronic Materials, Vol. 24, 1995, pp. 1465-1472.
[26] Y. Kariya and M. Otsuka, “Effect of Bismuth on the Isothermal Fatigue Properties of Sn-3.5 mass% Ag Solder Alloy,” Journal of Electronic Materials, Vol. 27, 1998, pp. 866-870.
[27] Y. Kariya and M. Otsuka, “Mechanical Fatigue Characteristics of Sn-3.5Ag-X (X=Bi, Cu, Zn, and In) Solder Alloys,” Journal of Electronic Materials, Vol. 27, 1998, pp. 1229-1235.
[28] H. Kabassis, J. W. Rutter, and W. C. Winegard, “Phase Relationships in Bi-In-Sn Alloy System,” Materials Science and Technology, Vol. 2, 1986, pp. 985-988.
[29] N. C. Lee, “Getting Ready for Lead-Free Solders,” Soldering and Surface Mount Technology, Vol. 9, 1997, pp. 65-69.
[30] Z. Mei and J. W. Morris, Jr., “Characterization of Eutectic Sn-Bi Solder Joints,” Journal of Electronic Materials, Vol. 21, 1992, pp. 599-607.
[31] C. H. Raeder, L. E. Felton, V. A. Tanzi, and D. B. Knorr, “The Effect of Aging on Microstructure, Room-Temperature Deformation, and Fracture of Sn-Bi/Cu Solder Joints,” Journal of Electronic Materials, Vol. 23, 1994, pp. 611-617.
[32] R. R. Tummala, E. J. Rymaszewski, and A. G. Klopfenstein, Microelectronics Packaging Handbook, Part III, 2nd ed., Chapman & Hall, New York, 1997, pp. 221-223.
[33] J. W. Morris, J. L. F. Goldstein, and Z. Mei, “Microstructure and Mechanical Properties of Sn-In and Sn-Bi Solders,” JOM, Vol. 45, 1993, pp. 25-27.
[34] M. Ohring, Reliability and Failure of Electronic Material and Devices, Academic Press, San Diego, USA, 1998.
[35] 陳永樹, “電子構裝之力學特性分析,” 電子月刊, 第四卷, 第八期, 1998, pp. 79-88.
[36] C. Kanchanomai, Y. Miyashita, and Y. Mutoh, “Low-Cycle Fatigue Behavior and Mechanisms of a Lead-Free Solders 96.5Sn/3.5Ag,” Journal of Electronic Materials, Vol. 31, 2002, pp. 142-151.
[37] C. Kanchanomai, Y. Miyashita, and Y. Mutoh, “Low-Cycle Fatigue Behavior of Sn-Ag, Sn-Ag-Cu, Sn-Ag-Cu-Bi, Lead-Free Solders,” Journal of Electronic Materials, Vol. 31, 2002, pp. 456-465.
[38] J. S. Hwang and R. M. Vargas, “Solder Joint Reliability-Can Solder Creep,” Soldering and Surface Mount Technology, Vol. 2, 1990, pp. 38-45.
[39] C. Kanchanomai, Y. Miyashita, and Y. Mutoh, “Strain-Rate Effects on Low Cycle Fatigue Mechanism of Eutectic Sn-Pb Solder,” International Journal of Fatigue, Vol. 24, 2002, pp. 987-993.
[40] R. Berriche, M. E. Fine, and D. A. Jeannotte, “Environmental and Hold Time Effects on Fatigue of Low-Tin Lead-Based Solder,” Metallurgical Transactions A, Vol. 22, 1991, pp. 357-366.
[41] S. Vaynman, “Effect of Strain Rate on Fatigue of Low-Tin Lead-Based Solder,” IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol. 12, 1989, pp. 469-472.
[42] W. W. Lee, L. T. Nguyen, and G. S. Selvaduray, “Solder Joint Fatigue Models: Review and Applicability to Chip Scale Packages,” Microelectronics Reliability, Vol. 40, 2000, pp. 231-244.
[43] L. F. Coffin, Jr., “A Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal,” Transactions of ASME, Vol. 76, 1954, pp. 931-950.
[44] S. S. Manson, “Behavior of Materials under Conditions of Thermal Stress,” Heat Transfer Symposium, University of Michigan Engineering Research Institute, 1953, pp. 9-75.
[45] H. D. Solomon, “Fatigue of 60/40 Solder,” IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol. 9, 1986, pp. 423-432.
[46] L. F. Coffin Jr., “Fatigue at High Temperature,” pp. 5-34 in Fatigue at Elevated Temperature, ASTM STP 520, Edited by A. E. Carden, A. J. McEvily, and C. H. Wells, American Society for Testing Materials, Philadelphia, PA, 1973.
[47] J. F. Eckel, “The Influence of Frequency on the Repeated Bending Life of Acid Lead,” Proceedings of the American Society for Testing and Materials, Vol. 51, 1951, pp. 745-760.
[48] J. K. Tien, S. V. Nair, and V. C. Nardone, “Creep-Fatigue Interaction in Structural Alloys,” pp. 179-214 in Flow and Fracture at Elevated Temperatures, Edited by R. Raj, ASM, Metals Park, OH, USA, 1985.
[49] X. Q. Shi, H. L. J. Pang, W. Zhou, and Z. P. Wang, “Low Cycle Fatigue Analysis of Temperature and Frequency Effects in Eutectic Solder Alloy,” International Journal of Fatigue, Vol. 22, 2000, pp. 217-228.
[50] W. Engelmaier, “Fatigue Life of Leadless Chip Carrier Solder Joints During Power Cycling,” IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol. 6, 1983, pp. 232-237.
[51] S. Knecht and L. Fox, “Integrated Matrix Creep: Application to Accelerated Testing and Lifetime Predition,” Chapter 16 in Solder Joint Reliability: Theory and Applications, Edited by J. H. Lau, Van Nostrand Reinhold, New York, 1991.
[52] A. R. Syed, “Thermal Fatigue Reliability Enhancement of Plastic Ball Grid Array (PBGA) Packages,” pp. 1211-1216 in Proceedings of the 46th Electronic Components and Technology Conference, Edited by R. R. Tummala and J. E. Billigmeier, Institute of Electrical and Electronics Engineers, New York, NY, 1996.
[53] G. E. Dieter, Mechanical Metallurgy, 3rd ed., McGraw-Hill, Inc., New York, 1986, pp. 466-470.
[54] J. A. Collins, Failure of Materials in Mechanical Design: Analysis, Prediction, Prevention, 2nd ed., John Wiley&Sons, Inc., New York, USA, 1993, pp. 488-494.
[55] S. S. Manson, G. R. Halford, and M. H. Hirschberg, “Creep-Fatigue Analysis by Strain-Range Partitioning,” pp. 12-24 in Design for Elevated Temperature Environment, Edited by S. Y. Zamrik, ASME, New York, 1971.
[56] Y. Kariya, T. Morihata, E. Hazawa, and M. Otsuka, “Assessment of Low-Cycle Fatigue Life of Sn-3.5 mass% Ag-X (X=Bi or Cu) Alloy by Strain-Range Partitioning Approach,” Journal of Electronic Materials, Vol. 30, 2001, pp. 1184-1189.
[57] H. Conrad, Z. Guo, Y. Fahmy, and D. Yang, “Influence of Microstructure Size on the Plastic Deformation Kinetics, Fatigue Crack Growth Rate, and Low-Cycle Fatigue of Solder Joints,” Journal of Electronic Materials, Vol. 28, 1999, pp. 1062-1070.
[58] B. T. Lampe, “Room Temperature Aging Properties of Some Solder Alloys,” Welding Journal, Vol. 55, 1976, pp. 330-s-340-s.
[59] H. J. Frost, “Microstructure and Mechanical Properties of Solder Alloys,” pp.266-278 in Solder Joint Reliability: Theory and Applications, Edited by J. H. Lau, Van Nostrand Reinhold, New York, 1991.
[60] E. C. Cutiongco, S. Vaynman, M. E. Fine, and D. A. Jeannotte, “Isothermal Fatigue of 63Sn-37Pb Solder,” Journal of Electronic Packaging, Vol. 112, 1990, pp. 110-114.
[61] S. Vaynman, M. E. Fine, and D. A. Jeannotte, “Isothermal Fatigue of Low Tin Lead Based Solder,” Metallurgical Transactions A, Vol. 19, 1988, pp. 1051-1059.
[62] S. M. Lee and D. S. Stone, “Grain Boundary Sliding in As-Cast Pb-Sn Eutectic,” Scripta Metallurgica et Materialia, Vol. 30, 1994, pp. 1213-1218.
[63] S. M. Lee and D. S. Stone, “Deformation and Fracture of Pb-Sn-Eutectic under Tensile and Fatigue Loading,” Journal of Electronic Packaging, Vol. 114, 1992, pp. 118-122.
[64] H. D. Solomon, “Low Cycle Fatigue of Sn96 Solder with Reference to Eutectic Solder and a High Pb Solder,” Journal of Electronic Packaging, Vol. 113, 1991, pp. 102-108.
[65] H. Jiang, R. Hermann, and W. J. Plumbridge, “High-Strain Fatigue of Pb-Sn Eutectic Solder Alloy,” Journal of Materials Science, Vol. 31, 1996, pp. 6455-6461.
[66] C. Kanchanomai, Y. Miyashita, and Y. Mutoh, “Low Cycle Fatigue Behavior and Mechanisms of a Eutectic Sn-Pb Solder 63Sn/37Pb,” International Journal of Fatigue, Vol. 24, 2002, pp. 671-683.
[67] Z. Guo, A. F. Sprecher, D. Y. Jung, and H. Conrad, “Influence of Environment on the Fatigue of Pb-Sn Solder Joints,” IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol. 14, 1991, pp. 833-837.
[68] J. Zhao, Y. Miyashita, and Y. Mutoh, “Fatigue Crack Growth Behavior of 95Pb-5Sn Solder under Various Stress Ratios and Frequencies,” International Journal of Fatigue, Vol. 22, 2000, pp. 665-673.
[69] W. Yang and R. W. Messler, Jr., “Microstructure Evolution of Eutectic Sn-Ag Solder Joints,” Journal of Electronic Materials, Vol. 23, 1994, pp. 765-772.
[70] M. Harada and R. Satoh, “Mechanical Characteristics of 96.5Sn/3.5Ag Solder in Microbonding,” IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol. 13, 1990, pp. 736-742.
[71] National Electronics Manufacturing Initiative (NEMI) Lead-Free Readiness Task Force Report, NEMI, 1999.
[72] P. Zarrow, “On the Forefront: Lead Free: Don’t Fight a Fact, Deal with it!” Circuit Assembly, Vol. 10, 1999, pp. 18-20.
[73] 巨剛實業有限公司網站, “專利紛爭譯文,” 譯自 Nikkei Electrons, Senju Metal Industry Co., Ltd., 日本, 2001, in “ http://www.greatgum.com.tw/view01.htm.”
[74] 賴玄金, “邁向21世紀之綠色電子產品國際會議紀要,” 電子與材料雜誌, 第八期, 2000, p. 111.
[75] F. Guo, S. Choi, J. P. Lucas, and K. N. Subramanian, “Effects of Reflow on Wettability, Microstructure and Mechanical Properties in Lead-Free Solders,” Journal of Electronic Materials, Vol. 29, 2000, pp. 1241-1248.
[76] C. M. L. Wu, D. Q. Yu, C. M. T. Law, and L. Wang, “Improvements of Microstructure, Wettability, Tensile and Creep Strength of Eutectic Sn-Ag Alloy by Doping with Rare-Earth Elements,” Journal of Materials Research, Vol. 17, 2002, pp. 3146-3154.
[77] P. L. Liu and J. K. Shang, “Influence of Microstructure on Fatigue Crack Growth Behavior of Sn-Ag Solder Interfaces,” Journal of Electronic Materials, Vol. 29, 2000, pp. 622-627.
[78] I. E. Anderson, B. A. Cook, J. Harringa, and R. L. Terpstra, “Microstructural Modifications and Properties of Sn-Ag-Cu Solder Joints Induced by Alloying,” Journal of Electronic Materials, Vol. 31, 2002, pp. 1166-1174.
[79] I. E. Anderson, B. A. Cook, J. L. Harringa, and R. L. Terpstra, “Sn-Ag-Cu Solders and Solder Joints: Alloy Development, Microstructure, and Properties,” JOM, Vol. 54, 2002, pp. 26-29.
[80] K. S. Kim, S. H. Huh, and K. Suganuma, “Effects of Cooling Speed on Microstructure and Tensile Properties of Sn-Ag-Cu Alloys.” Materials Science and Engineering A, Vol. 333, 2002, pp.106-114.
[81] D. W. Henderson, T. Gosselin, A. Sarkhel, S. K. Kang, W. K. Choi, D. Y. Shih, C. Goldsmith, and K. J. Puttlitz, “Ag3Sn Plate Formation in the Solidification of Near Ternary Eutectic Sn-Ag-Cu Alloys,” Journal of Materials Research, Vol. 17, 2002, pp. 2775-2778.
[82] C. Kanchanomai, Y. Miyashita, Y. Mutoh, and S. L. Mannan, “Influence of Frequency on Low Cycle Fatigue Behavior of Pb-Free Solder 96.5Sn-3.5Ag,” Materials Science and Engineering A, Vol. 345, 2003, pp. 90-98.
[83] I. Shohji, T. Yoshida, T. Takahashi, and S. Hioki, “Tensile Properties of Sn-3.5Ag and Sn-3.5Ag-0.75Cu Lead-Free Solders,” Materials Transactions, Vol. 43, 2002, pp. 1854-1857.
[84] 劉家明, “Sn-3.5Ag無鉛銲料與BGA墊層反應之研究,” 國立中央大學化學工程研究所碩士論文, 2000.
[85] 蕭麗娟, “SnAgCu無鉛銲料與BGA之Au/Ni墊層反應之研究,” 國立中央大學化學工程與材料工程研究所碩士論文, 2002.
[86] 曾乙修, “電子構裝銦錫無鉛銲錫與鎳及銅基材之界面反應研究,” 國立臺灣大學材料科學與工程學研究所博士論文, 2000.
[87] 張秀玉, “無鉛銲料與基材之反應潤濕,” 國立清華大學化學工程學系碩士論文, 2001.
[88] 饒慧美, “添加Sb、Cu對無鉛銲料Sn-Ag銲點之機械性質及微結構研究,” 國立成功大學機械工程學系碩士論文, 1999.
[89] 楊文忠, “錫銦與錫銦銀無鉛銲料之高溫機械性質研究,” 中華大學機械與航太工程研究所碩士論文, 2000.
[90] “Standard Practice for Strain-Controlled Fatigue Testing,” ASTM E606-92, Annual Book of ASTM Standards, Vol. 3.01, American Society for Testing and Materials, 1998, pp. 528-542.
[91] “Standard Test Method for Tension Testing of Metallic Material,” ASTM E8M-98, Annual Book of ASTM Standards, Vol. 3.01, American Society for Testing and Materials, 1998, pp. 78-98.
[92] M. E. Loomans and M. E. Fine, “Tin-Silver-Copper Eutectic Temperature and Composition,” Metallurgical and Materials Transactions A, Vol. 31A, 2000, pp.1155-1162.
[93] K. W. Moon, W. J. Boettinger, U. R. Kattner, F. S. Biancaniello, and C. A. Handwerker, “Experimental and Thermodynamic Assessment of Sn-Ag-Cu Solder Alloys,” Journal of Electronic Materials, Vol. 29, 2000, pp. 1122-1136.
[94] R. E. Reed-Hill and R. Abbaschian, Physical Metallurgy Principles, 3rd ed., International Thomson Publishing, New York, 1992, Chapter 23.
[95] Z. Mei, D. Grivas, M. C. Shine, and J. W. Morris, Jr., “Superplastic Creep of Eutectic Tin-Lead Solder Joints,” Journal of Electronic Materials, Vol. 19, 1990, pp. 1273-1280.
[96] W. J. Plumbrige and C. R. Gagg, “Effects of Strain Rate and Temperature on the Stress-Strain Response of Solder Alloys,” Journal of Materials Science: Materials in Electronics, Vol. 10, 1999, pp. 461-468.
[97] S. R. Agnew and J. R. Weertman, “ Cyclic Softening of Ultrafine Grain Copper,” Materials Science and Engineering A, Vol. A244, 1998, pp. 145-153.
[98] N. Wade, K. Wu, J. Kunii, S. Yamada, and K. Miyahara, “Effects of Cu, Ag and Sb on the Creep-Rupture Strength of Lead-Free Solder Alloys,” Journal of Electronic Materials, Vol. 30, 2001, pp. 1228-1231.
[99] T. G. Nieh, J. Wadsworth, and O. D. Sherby, Superplasticity in Metals and Ceramics, The Press Syndicate of the University of Cambridge, United Kingdom, 1997, Chapter 4.
[100] B. P. Kashyap and G. S. Murty, “Superplastic Behavior of the Sn-Pb Eutectic in the As-Worked State,” Metallurgical Transactions A, Vol. 13A, 1982, pp. 53-58.
[101] T. Haruna, T. Shibayanagi, S. Hori, and N. Furushiro, “Effect of Grain Boundary Sliding During Superplastic Deformation,” Materials Transactions, JIM, Vol. 33, 1992, pp. 374-379.
[102] R. B. Vastava and T. G. Langdon, “Investigation of Intercrystalline and Interphase Boundary Sliding in the Superplastic Pb-62% Sn Eutectic,” Acta Metallurgica, Vol. 27, 1979, pp. 251-257.
[103] R. Z. Valiev and T. G. Langdon, “Investigation of the Role of Intragranular Dislocation Strain in the Superplastic Pb-62% Sn Eutectic Alloy,” Acta Metallurgica et Materialia, Vol. 41, 1993, pp. 949-954.
[104] J. Zhao, “Effect of Aging Treatment on Fatigue Crack Growth in Eutectic Sn-Pb Alloy,” Scripta Materialia, Vol. 48, 2003, pp. 1277-1281.
[105] Z. Mei and J. W. Morris, JR., “Superplastic Creep of Low Melting Point Solder Joints,” Journal of Electronic Materials, Vol. 21, 1992, pp. 401-407. |