參考文獻 |
Agostini, B., Fabbri, M., Park, J. E., Wojtan, L., Thome, J. R., and Michel, B., 2007, “State of the Art of High Heat Flux Cooling Technologies,” Heat Transfer Engineering, Vol. 28, no. 4, pp. 258-281.
Ameel, T. A., Warrington, R. O., Wegeng, R. S., and Drost, M. K., 1997, “Miniaturization Technologies Applied to Energy Systems,” Journal of Energy Conversion and Management, Vol. 38, pp. 969-982.
Ashman, S., and Kandlikar, S. G., 2006, ”A Review of Manufacturing Processes for Microchannel Heat Exchanger Fabrication,” Proceed-ings of the 4th International Conference on Nanochannels, Micro-channels and Minichannels, June 19-21, Limerick, Ireland, Paper No. ICNMM2006-96121.
Bar-Cohen, A., 1987, “Thermal Management of Air- and Liquid-Cooled Multichip Modules,” IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol. CHMT-10, No. 2, pp. 159-175.
Bowman, W. J., and Maynes, D., 2001, “A Review of Micro Heat Ex-changer Flow Physics, Fabrication Methods and Application,” Inter-national Mechanical Engineering Congress and Exhibition (IMECE 2001), New York, HTD-24280, pp. 385-407.
Colgan, E. G., Furman, B., Gaynes, M., Graham, W. S., LaBianca, N. C., Magerlein, J. H., Polastre, R.J., Rothwell, M. B., Bezama, R. J., Choudhary, R., Marston, K. C., Toy, H., Wakil, J., Zitz, J. A., and Schmidt, R.,R., 2007, ”A Practical Implementation of Silicon Micro-channel Coolers for High Power Chips,” IEEE Transactions on Components and Packaging Technologies, Vol. 30, No. 2, pp. 218-225.
Commenge, J. M., Falk, L., Corriou, J. P., and Matlosz, M., 2002, “Optimal Design for Flow Uniformity in Microchannel Reactors,” AIChE Jour-nal, Vol. 48, pp. 345-358.
Copeland, D., Takahira, H., and Nakayama, W., 1995, “Manifold Micro-channel Heat Sinks; Theory and Experiments,” Thermal Science and Engineering, Vol. 3, No. 2, pp. 9-15.
Curamik Electronics GmbH, 2005, PolarXstream® - Cooler Data Sheet.
Dixit, P., Lin, N., Miao, J., Wong, W. K., Choon, T. K., 2008, “Silicon Nanopillars Based 3D Stacked Microchannel Heat Sinks Concept for Enhanced Heat Dissipation Applications in MEMS Packaging,” Sen-sors & Actuators : A Physical, Vol. 141, pp. 685-694.
Exel, K., and Schulz-Harder, J., 1998, ” Water cooled DBC Direct Bonded Copper Substrates,” Proceedings of the 24th Annual Conference of the IEEE Industrial Electronics Society (IECON '98), Aachen, Ale-manha, Vol. 3, pp. 2350-2354.
Focke, W. W., and Knibble, P. G., 1984, “Flow Visualization in Parallel Plate Ducts with Corrugated Walls,” CSIR Report CENC M-519.
Focke, W. W., Zachariades, J., and Oliver, I., 1985, “The Effect of Corruga-tion Onclination Angle on the Thermohydraulic Performance of Plate Heat Exchangers,” International Journal of Heat and Mass transfer, Vol. 28, pp. 1469 - 1479.
Gschwind, P., Gaiser, G., Zimmerer, C., and Kottke, V., 2001, “Transport Phenomena in Micro Heat Exchangers with Corrugated Walls,” Mi-croscale Thermophysical Engineering, Vol. 5, No. 4, pp. 285-292.
Harpole, G. M., and Eninger, J. E., 1991, “Micro-channel Heat Exchanger Optimization,” Proceedings of the 7th IEEE Semi-Therm Symposium, Phoenix, AZ, pp. 59-63.
Holman, J. P., 2001, Experimental Methods for Engineers, McGraw-Hill, New York.
Holman, J. P., 2002, Heat Transfer, 9th ed., McGraw-Hill, New York.
Incropera, F. P., and DeWitt, D. P., 1996, Fundamentals of Heat Mass Transfer, 4th ed., John Wiley & Sons, New York.
Intel Corp., 2007, Intel○R Core TM 2 Extreme Quad-Core Processor QX6800 - Adopting Intel Advanced Liquid Cooling Technology Reference De-sign.
Jeffers, N., Punch, J., and Walsh, E., 2007, “An Experimental Characterisa-tion of Miniature Scale Cold Plates for Electronics Cooling Applica-tions,” ASME-JSME Thermal Engineering and Summer Heat Transfer Conference, HT2007-321537, Vancouver, BC, Canada, July 8~12.
Kandlikar, S. G., and Grande, W. J., 2004, ”Evaluation of Single Phase Flow in Microchannels for High Heat Flux Chip Cool-ing-Thermohydraulic Performance Enhancement and Fabrication Technology,” Heat Transfer Engineering, Vol. 25, No. 8, pp. 5-16.
Kandlikar, S. G., and Upadhye, H. R., 2005, ”Extending the Heat Flux Limit with Enhanced Microchannels in Direct Single Phase Cooling of Computer Chips,” Proceedings of 21st IEEE SEMI-THERM Sympo-sium, San Jose, CA, pp. 8-15.
Kishimoto, T., and Sasaki, S., 1987, “Cooling Characteristics of Dia-mond-Shaped Interrupted Cooling Fin for High-Power LSI Devices,” Electronics Letters, Vol. 23, No. 9, pp. 456-457.
Kosar, A., Mishra, C., and Peles, Y., 2005, “Laminar Flow Across a Bank of Low Aspect Ratio Micro Pin Fins,” Journal of Fluids Engineering, Vol. 127, pp. 419-430.
Kosar, A., and Peles, Y., 2006, “Thermal-Hydraulic Performance of MEMS-based Pin Fin Heat Sink,” Journal of Heat Transfer, Vol. 128, pp. 121-131.
Kosar, A., and Peles, Y., 2007, “Micro Scale Pin Fin Heat Sinks : Paramet-ric Performance Evaluation Study,” IEEE Transactions on Compo-nents and Packaging Technologies, Vol. 30, No. 4, pp. 855-865.
Krishnamoorthy, C., and Ghajar, A. J., 2007, “Single-Phase Friction Factor in Micro-Tubes: A Critical Review of Measurements, Instrumentation and Data Reduction Techniques from 1991-2006,” Proceedings of the 5th International Conference on Nanochannels, Microchannels and Minichannels, June 18-20, Puebla, Mexico.
Kroo, I., 2007, Applied Aerodynamics — A Digital Textbook, published on CD-ROM by Desktop Aeronautics, Inc., Version 5.0.
Lee, P. S., Ho, J. C., and Xue, H., 2002, “Experimental Study on Laminar Heat Transfer in Microchannel Heat Sink,” Proceedings of the 8th In-tersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM '02), pp. 379-386.
Lei, N., Skandakumaran, P., and Ortega, A., 2006, “Experiments and Mod-eling of Multilayer Copper Minichannel Heat Sinks in Single-Phase Flow,” Proceedings of the 10th Intersociety Conference on Thermal and Thermomechanical Phenomena in Electronic Systems (ITHERM '06), pp. 9-18.
Lin, T.-Y., and Yang, C.-Y., 2007, “An Experimental Investigation on Forced Convection Heat Transfer Performance in Micro Tubes by The Method of Liquid Crystal Thermography,” International Journal of Heat and Mass Transfer, Vol. 50, pp. 4736-4742.
Lu, M.-C., B. C. Yang, and Wang, C.-C., 2004, ” Numerical Study of Flow Mal-distribution on the Flow and Heat Transfer for Multi-channel Cold-Plates,” Proceedings of 20th IEEE SEMI-THERM Symposium, , San Jose, CA, pp. 205-212.
Lu, M.-C., and Wang, C.-C., 2006, ”Effect of the Inlet Location on the Per-formance of Parallel-Channel Cold-Plate,” IEEE Transactions on Components and Packaging Technologies, Vol. 29, No. 1, pp. 30-38.
Missaggia, L. J., Walpole, J. N., Liau, Z. L., and Phillips, R. J., 1989, “Mi-crochannel Heat Sinks for Two-Dimensional High-Power-Density Diode Laser Arrays,” IEEE Journal of Quantum Electronics, Vol. 25, No. 9, pp. 1988-1992.
Munson, B. R., Young, D. F., and Okiishi, T. H., 1998, Fundamental of Fluid Mechanics, 3rd ed., John Wiley & Sons, New York.
Patterson, M. K., Wei, X. J., Joshi, Y., and Prasher, R., 2004, “Numerical Study of Conjugate Heat Transfer in Stacked Microchannels,” Pro-ceedings of the 9th Intersociety Conference on Thermal and Ther-momechanical Phenomena in Electronic Systems (ITHERM '04), Vol. 1, pp. 372-380.
Phillips, R. J., 1987, Forced Convection, Liquid Cooled, Microchannel Heat Sinks, M.S. Thesis, Department of Mechanical Engineering, Massachusetts Institute of Technology, Cambridge, MA.
Prasher, R. S., Chang, J.-Y., Sauciuc, I., Narasimhan, S., Chau, D., Chrysler, G., Myers, A., Prstic, S., and Hu, C., 2005, “Nano and Micro Tech-nology-Based Next-Generation Package-Level Cooling Solutions,” Intel Technology Journal, Electronic Package Technology Develop-ment, Vol. 9, No. 4, pp. 285–296.
Prasher, R. S., Dirner, J., Chang, J.-Y., Myers, A., Chau, D., He, D., and Prstic, S., 2007, “Nusselt Number and Friction Factor of Staggered Arrays of Low Aspect Ratio Micropin-Fins Under Cross Flow for Water as Fluid,” Journal of Heat Transfer, Vol. 129, pp. 141-153.
Qu, W., and Mudawar, I., 2002, “Experimental and Numerical Study of Pressure Drop and Heat Transfer in a Single-Phase Micro-Channel Heat Sink,” International Journal of Heat and Mass Transfer, Vol. 45, pp. 2549-2565.
Reynell, M., 1990, “Advanced Thermal Analysis of Packaged Electronic Systems Using Computational Fluid Dynamics Techniques,” Com-puter-Aided Engineering Journal, Vol. 7, pp. 104-106.
Ryu, J. H., Choi, D. H., and Kim, S. J., 2003, “Three-Dimensional Optimi-zation of A Manifold Microchannel Heat Sink,” International Journal Heat Mass Transfer, Vol. 46, pp. 1533-1562.
Saini, M., and Webb, R. L., 2003, “Heat Rejection Limits of Air-Cooled Plane Fin Heat Sinks for Computer Cooling,” IEEE Transactions on Components and Packaging Technologies, Vol. 26, pp. 71-79.
Steinke, M. E., and Kandlikar, S. G., 2004, “Single-Phase Heat Transfer Enhancement Techniques in Microchannel and Minichannel Flow,” Proceedings of the 2nd International Conference on Minichannels and Microchannels, Rochester, New York, Paper No. ICMM2004-2328.
Steinke, M. E., and Kandlikar, S. G., 2006, “Single-phase Liquid Heat Transfer in Plain and Enhanced Microchannels,” Proceedings of the 6th International Conference on Minichannels and Microchannels, Rochester, New York, Paper No. ICMM2006-96227.
Tonomura, O., Tanaka, S., Noda, M., Kano, M., Hasebe, S., and Hashimoto, I., 2004, “CFD-Based Optimal Design of Manifold in Plate-Fin Mi-crodevices,” Chemical Engineering Journal, Vol. 101, pp. 397-402.
Tuckerman, D. B., and Pease, R. F. W., 1981, “High-Performance Heat Sinking for VLSI,” IEEE Electron Device Letters, Vol. EDL-2, No. 5, pp. 126-129.
Tuckerman, D. B., 1984, Heat-Transfer Microstructures for Integrated Cir-cuits, Ph.D. thesis, Department of Electrical Engineering, Standford University, Palo Alto, CA.
Webb, R. L., and Kim, N.-H, 2005, Principles of Enhanced Heat Transfer, 2nd ed., Taylor & Francis, New York.
Wei, X. J., 2004, Stacked Microchannel Heat Sinks for Liquid Cooling of Microelectronics Devices, Ph.D. thesis, Department of Mechanical Engineering, Georgia Institute of Technology, Atlanta, GA.
Wei, X. J., and Joshi, Y., 2004, “Stacked Microchannel Heat Sinks for Liq-uid Cooling of Microelectronic Components,” Journal of Electronic Packaging, Vol. 126, pp. 60-66.
Wei, X. J., Joshi, Y., and Patterson, M. K., 2007, ”Experimental and Nu-merical Study of a Stacked Microchannel Heat Sink for Liquid Cool-ing of Microelectronic Devices,” Journal of Heat Transfer, Vol. 129, pp. 1432-1444.
Yang, C.-Y., and Lin, T.-Y., 2007, “Heat Transfer Characteristics of Water Flow in Microtubes,” Experimental Thermal and Fluid Science, Vol. 32, pp. 432-439.
Zhang, H. Y., Pinjala, D., Wong, T. N., and Joshi, Y. K., 2005, “Develop-ment of Liquid Cooling Techniques for Flip Chip Ball Grid Array Packages With High Heat Flux Dissipations,” IEEE Transactions on Components and Packaging Technologies, Vol. 28, No. 1, pp. 127-135.
王啟川,2001,熱交換器設計,五南圖書出版公司,台北。
郭思齊,2006,液體冷卻系統中之微熱交換器性能分析與改良,國立中央大學機械工程研究所碩士論文,中壢。
賴耿陽,2000,金屬腐蝕加工技術,復漢,台南。
劉瑋輯,2005,微熱交換器之設計與性能測試,國立中央大學機械工程研究所碩士論文,中壢。 |