參考文獻 |
[1] M. Harauta, N. Yamada, T. Kobayashi, S. Ijima, “Gold catalysts prepared by coprecipitation for low-temperature oxidation of hydrogen and of carbon monoxide”, J. Catal. 115 (1989) 301–309.
[2] C. Milone, R. Ingoglia, S. Galvagno, “Gold supported on iron oxy-hydroxides: a versatile tool for the synthesis of fine chemicals”, Gold. Bull. 39 (2006) 54–65.
[3] C. Peter, “Heterogeneously catalysed hydrogenation using gold catalysts”, Appl. Catal. A: Gen. 291 (2005) 222–229.
[4] R. J. H. Grisel, B. E. Nieuwenhuys, “Selective oxidation of CO over supported Au catalyst”, J. Catal. 199 (2001) 48–59.
[5] R. J. H. Grisel, C. J. Westsrate, A. Goossens, M. W. J. Craje, A. M. Kraan, B. E. Nieuwenhuys, “Oxidation of CO over Au/MOX/Al2O3 multi-component catalysts in a hydrogen-rich environment”, Catal. Today 72 (2002) 123–132.
[6] F. Boccuzzi, A. Chiorino, M. Manzoli, D. Andreeva, T. Tabakova, “FTIR study of the low temperature water-gas shift reaction on Au/Fe2O3 and Au/TiO2 catalysts”, J. Catal. 188 (1999) 176–185.
[7] J. Hua, K. Wei, Q. Zheng, X. Lin, “Influence of calcination temperature on the structure and catalytic performance of Au/iron oxide catalysts for water-gas shift reaction”, Appl. Catal. A: Gen. 259 (2004) 121–130.
[8] A. Ueda, M. Haruta, “Nitric oxide reduction with hydrogen, carbon monoxide, and hydrocarbons over gold catalysts”, Gold. Bull. 32 (1999) 3–11.
[9] M. A. Debeila, N. J . Coville, M. S. Scurrell, G. R. Hearne, M. J. Witcomb, “Effect of pretreatment variables on the reaction of nitric (NO) with Au-TiO2: DRIFTS studies”, J. Phys. Chem. B 108 (2004) 18254–18260.
[10] S. Scire, S. Minico, C. Crisafulli, C. Satriano, A. Pistone, “Effect of pretreatment variables on the reaction of nitric oxide with Au-TiO2: DRIFTS studies”, Appl. Catal. B: Environ. 40 (2003) 43–49.
[11] S. Minio, S. Scire, C. Crisafulli, S. Galvagno, “Catalytic combustion of volatile organic compounds on gold/cerium oxide catalysts”, Appl. Catal. B: Environ. 34 (2001) 277–285.
[12] A. V. W. Janssens, A. Carlsson, A. Puig-Molina, B. S. Clausen, “Relation between nanoscale Au particccle structure and activity for CO oxidation on supported gold catalysts”, J. Catal. 240 (2006) 108–113.
[13] M. S. Chen, D. W. Goodman, “Structure-activity relationships in supported Au catalysts”, Catal. Today 111 (2006) 22–33.
[14] M. Mavrikakis, P. Stoltze, J. K. Norskov, “Making gold less noble”, Catal. Lett. 64 (2000) 101–106.
[15] N. Lopez, T. V. W. Janssens, B. S. Clausen, Y. Xu, M. Mavrikakis, T. Bligaard, J. K. Nørskov, “On the origin of the catalytic activity of gold nanoparticles for low-temperature CO oxidation”, J. Catal. 223 (2001) 232–235.
[16] N. Weiher, E. Bus, L. Delannoy, C. Louis, D. E. Ramaker, J. T. Miller, J. A. V. Bokhoven, “Structure and oxidation state of gold on different supports under various CO oxidation conditions”, J. Catal. 240 (2006) 100–107.
[17] Z. P. Liu, X. Q. Gong, J. Kohanoff, C. Sanchez, P. Hu, “Catalytic role of metal oxide in gold-based catalysts: A first principles study of CO oxidation on TiO2 supported Au”, Phys. Rev. Lett. 91 (2003) 266102–1–266102–4.
[18] A. I. Kozlov, A. P. Kozlova, K. Asakura, Y. Matsui, T. Kogure, T. Shido, Y. Iwasawa, “Supported gold catalysts prepared from a gold phosphine precursor and as-precipitated metal-hydroxide precursors: Effect of preparation conditions on the catalytic performance”, J. Catal. 196 (2000) 56–65.
[19] L. Fan, N. Ichikuni, S. Shinazu, T. Uematsu, “Preparation of Au/TiO2 catalysts by suspension spray reaction method and their catalytic property for CO oxidation”, Appl. Catal. A: Gen. 246 (2003) 87–95.
[20] J. D. Grunwaldt, C. Kiener, C. Wogerbauer, A. J. Baiker, “Preparation of supported gold catalysts for low temperature CO oxidation via size-controlled gold colloids”, J. Catal. 181 (1999) 223–232.
[21] R. Zanella, L. Delannoy, C. Louis, “Mechanism of deposition of gold precursors onto TiO2 during the preparation by cation adsorption and deposition-precipitation with NaOH and urea”, Appl. Catal. A: Gen. 291 (2005) 62–72.
[22] S. Ivanova, C. Petit, V. Pitchon, “A new preparation method for the formation of gold nanoparticles on an oxide support”, Appl. Catal. A: Gen. 267 (2004) 191–201.
[23] A. I. Kozlov, A. P. Kozlova, H. Lin, Y. Iwasawa, “A new approach to active supported Au catalysts”, Appl. Catal. A: Gen. 182 (1999) 9–28.
[24] D. Wang, Z. Hao, D. Cheng, X. Shi, C. Hu, “Influence of pretreatment conditions on low temperature CO oxidation over Au/MOx/Al2O3 catalysts”, J. Mole. Catal. A: Chem. 200 (2003) 229–238.
[25] A. Wolf, F. Schuth, “A systematic study of the synthesis conditions for the preparation of highly active gold catalysts”, Appl. Catal. A: Gen. 226 (2002) 1–13.
[26] I. Dobrosz, K. Jiratova, V. Pitchon, J. M. Rynkowski, “Effect of the preparation of supported particles on the catalytic activity in CO oxidation reaction”, J. Mole. Catal. A: Chem. 234 (2005) 187–197.
[27] F. Moreau, G. C. Bond, A. O. Taylor, “Gold on titania catalysts for the oxidation of carbon monoxide: control of pH during preparation with various gold contents”, J. Catal. 231 (2005) 105–114.
[28] S. Ivanova, V. Pitchon, C. Petit, H. Herschbach, A. V. Dorsselaer, E. Leize, “Preparation of alumina supported gold catalysts: gold complexes genesis, identification and speciation by mass spectrometry”, Appl. Catal. A: Gen. 298 (2006) 203–210.
[29] W. C. Li, M. Comotti, F. Schuth, “Highly reproducible syntheses of active Au/TiO2 catalysts for CO oxidation by deposition-precipitation or impregnation”, J. Catal. 237 (2006) 190–196.
[30] V. Schwartz, D. S. Mullins, “XAS study of Au supported on TiO2: influence of oxidation state and particle size on catalytic activity”, J. Phys. Chem. B 108 (2004) 15782–15790.
[31] J. C. Fierro-Gonzalez, B. C. Gate, “Oxidation states of gold in MgO-supported complexes and clusters: Characterization by X-ray absorption spectroscopy and temperature programmed oxidation and reduction”, J. Phys. Chem. B 107 (2003) 2242–2248.
[32] R. P. Nnikrishnan, D. Sarojini, “Highly active gold-ceria catalyst for the room temperature oxidation of carbon monoxide”, Appl. Catal. A: Gen. 299 (2006) 266–273.
[33] T. Daniells, A. R. Overweg, M. Makkee, J. A. Moulijn, “The mechanism of low-temperature CO oxidation with Au/Fe2O3 catalysts: a combined Mössbauer, FT-IR, and TAP reactor study”, J. Catal. 230 (2005) 52–65.
[34] M. M. Schubert, S. Hackenberg, A. C. V. Veen, M. Muhler, V. Plzak, R. J Behm, “CO oxidation over supported gold catalysts–inert and active support materials and their role for the oxygen supply during reaction”, J. Catal. 197 (2001) 113–122.
[35] D. Andreeva, V. Idakiev, T. Tabakova, L. Ilieva, P. Falaras, A. Bourlinos, A. Travlos, “Low temperature water-gas shift reaction over Au/CeO2 catalysts”, Catal. Today 72 (2002) 51–57.
[36] J. L. Margitfalvi, A. Fasi, M. Hegeds, F. Lonyi, S. Gbolos, N. Bogdanchikova, “Au/MgO catalysts modified with ascorbic acid for low temperature CO oxidation”, Catal. Today 72 (2002) 157–169.
[37] S. J. Lee, A. Gavriilidis, “Supported Au catalysts for low temperature CO oxidation prepared by impregnation”, J. Catal. 206 (2002) 305–313.
[38] 李東穎,「Pd (Ni)/hydrotalcite觸媒於苯酚一步合成還己酮之研究」, 國立中央大學, 化學工程與材料工程學系, 碩士論文 (1997).
[39] 蔡俊煌, 「Ni/Mg-Al-O觸媒於CH4/CO2重組反應之研究」, 國立中央大學, 化學工程與材料工程學系, 碩士論文 (2002).
[40] 廖志偉, 「一步合成甲基異丁基酮之多功能觸媒研究-Pd (Ni)/hydrotalcite」, 中大化工所碩士論文 (1996).
[41] A. Manasilp, E. Gulari, “Selective CO oxidation over Pt/alumina catalysts for fuel cell application”, Appl. Catal. B: Environ 37 (2002) 17–25.
[42] P. V. Snytnikov, V. A. Sobyanin, V. D. Belyaev, P. G. Tsyrulnikov, N. B. Shitova, D. A. Shlyapin, “Selective oxidation of carbon monoxide in excess hydrogen over Pt-, Ru- and Pd-supported catalysts”, Appl. Catal. A: Gen. 239 (2003) 149–156.
[43] F. Marino, C. Descorme, D. Duprez, “Novle metal catalysts for the preferential oxidation of carbon monoxide in the presence of hydrogen (PROX)”, Appl. Catal. B: Environ 54 (2004) 59–66.
[44] G. Avgouropoulos, T. Ioannides, C. Padopoulou, J. Batista, S. Hocevar, H. K. Matralis, “A comparative study of Pt/γ-Al2O3, Au/α-Fe2O3 and CuO-CeO2 catalysts for the selective oxidation of carbon monoxide in excess hydrogen”, Catal. Today 75 (2002) 157–167.
[45] M. J. Kahich, H. A. Gasteiger, R. J. Behm, “Kinetics of selective CO oxidation in H2-rich gas on Pt/Al2O3”, J. Catal. 171 (1997) 93–105.
[46] D. H. Kim, M. S. Lim, “Kinetics of selective CO oxidation in hydrogen-rich mixtures on Pt/alumina catalysts”, Appl. Catal. A: Gen. 224 (2002) 27–38.
[47] M. M. Schubert, M. J. Kahlich, H. A. Gasteiger, R. J. Behm, “Correlation between CO surface coverage and selectivity/kinetics for the preferential CO oxidation over Pt/γ-Al2O3 and Au/α-Fe2O3: an in-situ DRIFTS study”, J. Power Sources 84 (1999) 175–182.
[48] X. Liu, O. Korotkikh, R. Farrauto, “Selective catalytic oxidation of CO in H2: Structure study of Fe oxide-promoted Pt/alumina catalyst”, Appl. Catal. A: Gen 226 (2002) 293–303.
[49] H. Igarashi, H. Uchida, M. Suzuki, Y. Sasaki, M. Watanabe, “Removal of carbon monoxide from hydrogen-rich fuels by selective oxidation over platinum catalyst supported on zeolite”, Appl. Catal. A: Gen 159 (1997) 159–169.
[50] M. J. Kahlich, H. A. Gasteiger, R. J. Behm, “Kinetics of the selective low-temperature oxidation of CO in H2-rich gas over Au/α-Fe2O3”, J. Catal. 182 (1999) 430–440.
[51] R. M. T. Sanchez, A. Ueda, K. Tanaka, M. Haruta, “Selective oxidation of CO in hydrogen over gold supported on manganese oxides”, J. Catal. 168 (1997) 125–127.
[52] A. Luengnaruemitchai, S. Osuwan, E. Gulari, “Selective catalytic oxidation of CO in the presence of H2 over gold catalyst”, Inter. J. Hydrogen Energy 29 (2004) 429–435.
[53] V. Ponec, “On the role of promoters in hydrogenateon on metals: α,β-unsaturated aldehydes and ketones”, Appl. Catal. A: Gen. 149 (1997) 27–48.
[54] N. Mahata, F. G. Alves, M. F. R. Pereira, J. L. Figueiredo, “Selective hydrogenation of cinnamaldehyde to cinnamyl alcohol over mesoporous carbon supported Fe and Zn promoted Pt catalyst”, Appl. Catal. A: Gen. 339 (2008) 159–168.
[55] C. Mohr, P. Claus, “Hydrogenation properties of supported nanosized gold particles”, Sci. Prog. 84 (2001) 311–334.
[56] R. Meyer, C. Lemire, Sh. K. Shaikhutdinow, H. J. Freund, “Surface chemistry of catalysis by gold”, Gold Bulletin. 37 (2004) 72–124.
[57] D. J. Gorin and F. D. Toste, Nature. 446 (2007) 395–403.
[58] G. C. Bond, “Gold: A relatively new catalyst”, Catal. Today 72 (2002) 5–9.
[59] J. T. Miller, A. J. Kropf, Y. Zha, J. R. Regalbuto, L. Delannoy, C. Louis, E. Bus, J. A. van Bokhoven, “The effect of gold particle size on Au-Au bond length and reactivity toward oxygen in supported catalysts”, J. Catal. 240 (2006) 222–234.
[60] M. Haruta, “Catalysis of gold nanoparticles deposited on metal oxides”, CATTECH 6(3) (2002) 102–115.
[61] A. G. Sault, R. J. Madix, C. T. Campbell, “Adsorption of oxygen and hydrogen on Au(110)-(1 × 2)”, Surf. Sci. 169 (1986) 347–356.
[62] P. Buffet, J-P. Borel, “Size effect on the melting temperature of gold particles”, Phys. Rev. A. 13 (1976) 2287–2298.
[63] G. C. Bond, P. A. Sermon, “Gold catalysts for olefin hydrogenateon”, Gold Bull. 6 (1976) 102–105.
[64] M. Haruta, S. Tsubota, T. Kobayashi, H. Kageyama, J. Genet, B. Delmon, “Low-temperature oxidation of CO over gold supported on TiO2, α-Fe2O3, Co3O4,”, J. Catal. 144 (1993) 175–192.
[65] M. Haruta, “When gold is not noble: Catalysis by nanoparticles”, The Chem Record 3 (2003) 75–87.
[66] H. Y. Tsai. Y. D. Lin, W. T. Fu, S. D. Lin, “The activation of supported Au catalysts prepared by impregnation”, Gold. Bulletin. 40/3 (2007) 184–191.
[67] V. Ponec, G. C. Bond, “Catalysis by metals and alloys”, Elsevier, Amsterdam, 1996.
[68] F. B. Li, X. Z. Li, “Photocatalytic properties of gold/gold ion-modified titanium dioxide for waste treatment”, Appl. Catal. A: Gen. 228 (2002) 15–27.
[69] E. Seker, E. Gulari, “Single step sol–gel made gold on alumina catalyst for selective reduction of NOx under oxidizing conditions: effect of gold precursor and reaction conditions”, Appl. Catal. A: Gen. 232 (2002) 203–217.
[70] D. D. Smith, L. A. Snow, L. Sibille, E. Ignont, “Tunable optical properties of metal nanoparticle sol–gel composites”, J. Non-Cryst. Solids 285 (2001) 256–263.
[71] G. Lu, R. Zhao, G. Qian, Y. Qi, X. Wang, J. Suo, “A highly efficient catalyst Au/MCM-41 for selective oxidation cyclohexane using oxygen”, Catal. Lett. 97 (2004) 115–118.
[72] M. A. Ulibarri, I. Pavlovic, C. Barriga, M. C. Hermosin, J. Cornejo, “Adsorption of anionic species on hydrotalcite-like compounds: Effect of interlayer anion and crystallinity”, Appl. Clay Sci. 18 (2001) 17–27.
[73] F. Kovanda, K. Jiratova, J. Rymes, D. Kolousek, “Characterization of activated Cu/Mg/Al/hydrotalcites and their catalytic in toluene combustion”, Appl. Clay Sci. 18 (2001) 71–80.
[74] D. Tichit, B. Coq, “Catalysis by hydrotalcites and related material”, CATTECH. 7 (2003) 206–217.
[75] G. Busca, U. Costantino, F. Marmottini, T. Montanari, P. Patrono, F. Pinzari, G. Ramis, “Methanol steam reforming over ex-hydrotalcite Cu–Zn–Al catalysts”, Appl. Catal. A: Gen. 310 (2006) 70–78.
[76] F. Cavani, F. Trifiro, A. Vacari, “Hydrotalcite-type anionic clays: preparation, properties and applications”, Catal. Today 11 (1911) 173–301.
[77] W. T. Reichle, “Catalytic reactions by thermally activated anionic clay minerals”, J. Catal. 94 (1985) 547–577.
[78] A. Corma, V. Fornes, F. Rey, “Hydrotalcite as base catalyst: influence of the chemical composition and synthesis condition on the dehydrogenation of isopropanol”, J. Catal. 148 (1994) 205–212.
[79] A. L. McKenzie, C. T. Fishel, T. J. Davis, “Investigation of the surface structure and basic properties of calcined hydrotalcite”, J. Catal. 138 (1992) 547–561.
[80] N. Bejoy, “Hydrotalcite: The clay that cures”, Resonance, February (2001) 57–61.
[81] D. Tichit, M. H. Lhouty, A. Guida, B. H. Chiche, F. Figueras, A. Auroux, D. Bartalini, E. Farronn,“Textural properties and catalytic activity of hydrotalcite”, J. Catal. 151 (1995) 50–59.
[82] C. P. Keikar, A. A. Schutz, “Ni-, Mg- and Co-containing hydrotalcite-like materials with a sheet-like morphology: synthesis and characterization”, Microporous Material 10 (1997) 163–172.
[83] A. Corma, V. Fornes, R. M. Martin-Aranda, F. Rey, “Determination of base properties of hydrotalcite: Condensation of benzaldehyde with ethyl acetoacetate”, J. Catal. 134 (1992) 58–65.
[84] N. A. Hodge, C. J. Kiely, R. Whyman, M. R. H. Siddiqui, G. J. Hutchings, Q. A. Pankhurst, F. E. Wagner, R. R. Rajaram, S. E. Golunski, “Microstructural comparison of calcined and uncalcined gold/iron-oxide catalysts for low-temperature CO oxidation”, Catal. Today 72 (2002) 133–144.
[85] C. T. Chang, B. J. Liaw, C. T. Huang, Y. Z. Chen, “Preparation of Au/MgxAlO hydrotalcite catalysts for CO oxidation”, Appl. Catal. A: Gen. 332 (2007) 216–224.
[86] E. D. Park, J. S. Lee, “Effect of pretreatment conditions on CO oxidation over supported Au catalysts”, J. Catal. 186 (1999) 1–11.
[87] G. C. Bond, D. T. Thompson, “Gold-catalysed oxidation of carbon monoxide”, Gold. Bulletin. 33(2) (2000) 41–51.
[88] J. Guzman, B. C. Gate, “Oxidation state of gold in MgO-supported complexes and clusters: Characterization by X-ray absorption spectroscopy and temperature-programmed oxidation and reduction”, J. Phys. Chem. B 107 (2003) 2242–2248.
[89] E. Gy. Szabó, A. Tompos, M. Hegedűs, Á. Szegedi, J. L. Margitfalvi, “The influence of cooling atmosphere after reduction on the catalytic properties of Au/Al2O3 and Au/MgO catalysts in CO oxidation”, Appl. Catal. A: Gen. 320 (2007) 114–121.
[90] D. Boyd, S. Golunski, G.R. Hearne, T. Magadzu, K. Mallick, M. C. Raphulu, A. Venugopal, M.S. Scurrell, “Reductive routes to stabilized nanogold and relation to catalysis by supported gold”, Appl. Catal. A: Gen 292 (2005) 76–81.
[91] Q. Fu, S. Kudriavtseva, H. Saltsburg, M. Flytzani-Stephanopoulos, “Gold-ceria catalysts for low-temperature water-gas shift reaction”, Chem. Eng. J. 93 (2003) 41–53.
[92] J. D. Grunwaldt, M. Maciejewski, O. S. Becker, P. Fabrizioli, A. Baiker, “Comparative study of Au/TiO2 and Au/ZrO2 catalysts for low-temperature CO oxidation”, J. Catal. 186 (1999) 458–469.
[93] M. A. P. Dekkers, M. J. Lippits, B. E. Nienwenhuys, “Supported gold/MOx catalysts for NO/H2 and CO/O2 reactions”, Catal. Today 54 (1999) 381–390.
[94] M. Haruta, M. Daté, “Advances in the catalysis of Au nanoparticles”, Appl. Catal. A: Gen. 222 (2001) 427–437.
[95] T. M. Salama, T. Shido, H. Minagawa, M. Ichikawa, “Characterization of Gold(I) in NaY Zeolite and acidity Generation”, J. Catal. 152 (1995) 322–330.
[96] M. A. Bollinger, M. A. Vannice, “A kinetic and DRIFTS study of low-temperature carbon monoxide over Au-TiO2 catalysts”, Appl. Catal. B: Environ 8 (1996) 417–443.
[97] D. Guillemot, V. Y. Borovkov, V. B. Kazansky, M. Polisset-Thfoin, J. Fraissard, “Surface characterization of Au/HY by 129Xe NMR and diffuse reflectance IR spectroscopy of adsorbed CO. Formation of electron-deficient gold particles inside HY cavities”, J. Chem. Soc. Faraday Trans. 93 (1997) 3587–3591.
[98] S. Minicò, S. Scirè, C. Crisafulli, A. M. Visco, S. Galvagno, “FT-IR study of Au/Fe2O3 catalysts for CO oxidation at low temperature”, Catal. Lett. 47 (1997) 273–281.
[99] M. A. P. Dekkers, M. J. Lippits, B. E. Nieuwenhuys, “CO adsorption and oxidation on Au/TiO2”, Catal. Lett. 56 (1998) 195–197.
[100] H. Liu, A. I. Kozlov, A. P. Kozlova, T. Shido, Y. Iwasawa, “Active oxygen species and reaction mechanism for low-temperature CO oxidation on an Fe2O3-supported Au catalyst prepared from Au(PPh3)(NO3) and as-precipitated iron hydroxide”, Phys. Chem. 1 (1999) 2851–2860.
[101] H. Liu, A. I. Kozlov, A. P. Kozlova, T. Shido, K. Asakura, Y. Iwasawa, “Active oxygen species and mechanism for low-temperature CO oxidation reaction on a TiO2-supported Au catalyst prepared from Au(PPh3)(NO3) and As-precipitated titanium hydroxide”, J. Catal. 185 (1999) 252–264.
[102] J.-D. Grunwaldt, A. Baiker, “Gold/Titania interfaces and their role in carbon monoxide oxidation”, J. Phys. Chem. B 103 (1999) 1002–1012.
[103] A. K. Tripathi, V. S. Kamble, N. M. Gupta, “Microcalorimetry, adsorption, and reaction studies of CO, O2, and CO+O2 over Au/Fe2O3, Fe2O3, and polycrystalline gold catalysts”, J. Catal. 187 (1999) 332–342.
[104] M. Manzoli, A. Chiorino, F. Boccuzzi, “FTIR study of nanosized gold on ZrO2 and TiO2”, Surf. Sci. 532 (2003) 377–382.
[105] C. Lemire, R. Meyer, Sh. K. Shaikhutdinov, H.-J. Freund, “CO adsorption on oxide supported gold: from small clusters to monolayer islands and three-dimensional nanoparticles”, Surf. Sci. 552 (2004) 27–34.
[106] B. Schumacher, V. Plzak, M. Kinne, R. J. Behm, “Highly active Au/TiO2 catalysts for low-temperature CO oxidation: preparation, conditioning and stability”, Catal. Lett. 89 (2003) 109–114.
[107] D. C. Meier, D. W. Goodman, “The influence of metal cluster size on adsorption energies: CO adsorbed on Au clusters supported on TiO2”, J. Am. Chem. Soc. 126 (2004) 1892–1899.
[108] C. Winkler, A. J. Carew, S. Haq, R. Raval, “Carbon Monoxide on γ-Alumina single crystal surfaces with gold nanoparticles”, Langmuir 19 (2003) 717–721.
[109] M. Valden, S. Pak, X. Lai, D. W. Goodman, “Structure sensitivity of CO oxidation over model Au/TiO2 catalysts”, Catal. Lett. 56 (1998) 7–10.
[110] H. Liu, A. I. Kozlov, A. P. Kozlova, T. Shido, K. Asakura, Y. Iwasawa, “Active oxygen species and mechanism for low-temperature CO oxidation reaction on a TiO2-supported Au catalyst prepared from Au(PPh3)(NO3) and as-precipitated titanium hydroxide”, J. Catal. 185 (1999) 252–264.
[111] A. K. Tripathi, V. S. Kamble, N. M. Gupta, “Microcalorimetry, adsorption, and reaction studies of CO, O2, and CO+O2 over Au/Fe2O3, Fe2O3, and polycrystalline gold catalysts” J. Catal. 187 (1999) 332–342.
[112] H. H. Kung, M. C. Kung, C. K. Costello, “Supported Au catalysts for low temperature CO oxidation”, J. Catal. 216 (2003) 425–432.
[113] L. M. Molina, B. Hammer, “Some recent theoretical advances in the understanding of the catalytic activity of Au”, Appl. Catal. A: Gen. 291 (2005) 21–31.
[114] S. H. OH, R. M. Sinkevitch, “Carbon monoxide removal from hydrogen-rich fuel cell feedstream by selective catalytic oxidation”, J. Catal. 142 (1993) 254–262.
[115] B. Rohland, V. Plzak, “The PEMFC-integrated CO oxidation- a novel method of simplifying the fuell cell plant”, J. Power Sources 84 (1999) 183–186.
[116] O. Korotkikh, R. Frrauto, “Selective catalytic oxidation of CO in H2: Fuel cell applications”, Catal. Today 62 (2000) 249–254.
[117] H. Kim, N. P. Subramanian, B. N. Popov, “Prepare of PEM fuel cell electrodes using pulse electro-deposition”, J. Power Sources 138 (2004) 14–24.
[118] M. M. Schubert, A. Venugopal, M. J. Kahlich, V. Plzak, R. J. Behm, “Influence of H2O and CO2 on the selective CO oxidation in H2-rich gases over Au/α-Fe2O3”, J. Catal. 222 (2004) 32–40.
[119] B. Schumacher, Y. Denkwitz, V. Plzak, M. Kinne, R. J. Behm, “Kinetics, mechanism, and the influence of H2 on the CO oxidation reaction on a Au/TiO2 catalyst” J. Catal. 224 (2004) 449–462.
[120] W. Deng, J. D. Jesus, H. Saltsburg, M. Flytzani-Stephanopoulos, “Low-content gold-ceria catalysts for the water-gas shift and preferential CO oxidation reactions”, Appl. Catal. A: Gen. 291 (2005) 126–135.
[121] S. S. Pansare, A. Sirijaruphan, J. G. Goodwin, “Au-catalyzed selective oxidation of CO: a steady-state isotopic transient kinetic study”, J. Catal. 234 (2005) 151–160.
[122] J. Jia, K. Haraki, J. N. Kondo, K. Domen, K. Tamaru, “Selective hydrogenation of acetylene over Au/Al2O3 Catalysts”, J. Phys. Chem. B 104 (2000) 11153–11156.
[123] M. Okumura, T. Akita, M. Haruta, “Hydrogenation of 1,3-butadiene and of crotonaldehyde over highly dispersed Au catalysts”, Catal. Today 74 (2002) 265–269.
[124] J. E. Bailie, G. J. Hutchings, “Promotion by sulfur of gold catalysts for crotyl alcohol formation from crotonaldehyde hydrogenation”, Chem. Comm. (1999) 2151–2152.
[125] S. Schimpf, L. Martin, M. Christian, R. Uwe, B. Angelika, R. Jörg. H. Hofmeister, P. Claus, “Supported gold nanoparticles: In-depth catalyst characterization and application in hydrogenation and oxidation reactions”, Catal. Today 72 (2002) 63–78.
[126] C. Mohr, P. Claus, “Identification of active sites in gold-catalyzed hydrogenation of acrolein”, J. Am. Chem. Soci. 125 (2003) 1905–1911.
[127] J. Radnik, P. Claus, “On the origin of binding energy shifts of core levels of supported gold nanoparticles and dependence of pretreatment and material synthesis”, Phys. Chem. Chem. Phys. 5 (2003) 172–177.
[128] C. Mohr, H. Hofmeister, P. Claus, “The influence of real structure of gold catalysts in the partial hydrogenation of acrolein,” J. Catal. 213 (2003) 86–94.
[129] J. E. Bailie, H. A. Abdullah, J. A. Anderson, C. H. Rochester, N. V. Richardson, N. Hodge, Jian-Guo Zhang, A. Burrows, C. J. Kiel, G. J. Hutchings, “Hydrogenation of but-2-enal over supported Au/ZnO catalysts”, Phys. Chem. Chem. Phys. 3 (2001) 4113–4121.
[130] R. Zanella, C. Louis, S. Giorgio, R. Touroude, “Crotonaldehyde hydrogenation by gold supported on TiO2: structure sensitivity and mechanism”, J. Catal. 223 (2004) 328–339.
[131] B. Campo, C. Petit, M. A. Volpe, “Hydrogenation of crotonaldehyde on different Au/CeO2 catalysts”, J. Catal. 250 (2007) 1–8.
[132] E. Bus, R. Prins, J. A. van Bokhoven, “Origin of the cluster-size effect in the hydrogenation of cinnamaldehyde over supported Au catalysts”, Catal. Commun. 8 (2007) 1397–1402.
[133] C. Milone, C. Crisafulli, R. Ingoglia, L. Schipilliti, S. Galvagno, “A comparative study on the selective hydrogenation of α,β-unsaturated aldehyde and ketone to unsaturated alcohols on Au supported catalysts”, Catal. Today 122 (2007) 341–351.
[134] B. Campo, M. Volpe, S. Ivanova, R. Touroude, “Selective hydrogenation of crotonaldehyde on Au/HSA-CeO2 catalysts”, J. Catal. 242 (2006) 162–171.
[135] M. A. Vannice, B. Sen, “Metal-support effects on the intramolecular selectivity of crotonaldehyde hydrogenation over platinum”, J. Catal. 115 (1989) 65–78.
[136] A. Grioir-Fendler, D. Richard and P. Gallezot, “Chemioselectivity in the catalytic hydrogenateon of cinnamaldehyde: effect of metal particle morphology”, Catal. Lett. 5 (1990) 175–181.
[137] M. Englisch, A. Jentys and J. A. Lercher, “Structure sensitivity of the hydrogenation of crotonaldehyde over Pt/SiO2 and TiO2”, J. Catal. 166 (1997) 25–35.
[138] M. Englisch, V. S. Ranade, J. A. Lercher, “Liquid phase hydrogenation of crotonaldehyde over Pt/SiO2 catalysts” Appl. Catal. A: Gen. 163 (1997) 111–122.
[139] M. Abid, V. Paul-Boncour, R. Touroude, “Pt/CeO2 catalysts in crotonaldehyde hydrogenation: Selectivity, metal particle size and SMSI states” Appl. Catal. A: Gen. 297 (2006) 48–59.
[140] F. Delbecq, P. Sautet, “Competitive C=C and C=O adsorption of α,β-unsaterated aldehydes on Pt and Pd surfaces in relation with the selectivity of hydrogenation reactions: A theoretical approach”, J. Catal. 152 (1995) 217–236.
[141] A. Giroir-Fendler, D. Richard, and P. Gallezot, in Heterogeneous Catalysis and Fine chemicals, Studies in Surface science and Catalysis Vol.41, Elsevier, Amsterdam, (1988) 171.
[142] H. Yoshitake and Y. Iwasawa, “Active sites and reaction mechanisms for deuteration of acrolein on TiO2-, Y2O3-, ZrO2-, CeO2 and Na/SiO2- supported platinum catalysts”, J. Chem. Soc. Faraday Trans. 88 (3) (1992) 503–510.
[143] A. Sepulveda-Escribano, F. Coloma, F. Rodriguez-Reinoso, “Promoting Effect of Ceria on the Gas Phase Hydrogenation of Crotonaldehyde over Platinum Catalysts”, J. Catal. 178 (1998) 649–657.
[144] M. Consonni, D. Jokic, D. Yu. Murzin, R. Touroude, “High performances of Pt/ZnO catalysts in selective hydrogenation of crotonaldehyde”, J. Catal. 188 (1999) 165–175.
[145] D. Goupil, P. Fouilloux and R. Maurel, “Activity and selectivity of Pt-Fe/C alloys for the liquid phase hydrogenation of cinnamaldehyde to cinnamyl alcohol”, Catal. Lett. 33 (1987) 185–193.
[146] V. Satagopan and S. B. Chandalia, “Selectivity aspects in the multi-phase hydrogenation of α,β-unsaturated aldehydes over supported noble metal catalysts: Part II”, J. Chem. Tech. Biotechnol. 60 (1994) 17–21.
[147] W. K. Amornpattana, J. M. Winterbottom, “Pt and Pt-alloy catalysts and their properties for the liquid-phase hydrogenation of cinnamaldehyde”, Catal. Today 66 (2001) 277–289.
[148] J. Hájek, N. Kumar, P. Mäki-Arvela, T. Salmi, D. Y. Murzin, I. Paseka, J. Heikkilä, E. Laine, P. Laukkanen, T. Väyrynen, “Ruthenium-modified MCM-41 mesoporous molecular sieve and Yzeolite catalysts for selective hydrogenation of cinnamaldehyde”, Appl. Catal. A: Gen. 251 (2003) 385–396.
[149] M. Shirai, T. Tanaka, M. Arai, “Selective hydrogenation of α,β-unsaturated aldehyde tounsaturated alcohol with supported platinum catalysts at high pressures of hydrogen”, J. Mole. Catal. A: Chem. 168 (2001) 99–103.
[150] M. A. Aramendía, V. Borau, C. Jiménez, J. M. Marinas, A. Porras, F. J. Urbano, “Selective liquid-phase hydrogenation of citral over supported palladium”, J. Catal. 172 (1997) 46–54.
[151] I. Kun, Gy. Szöllösi, M. Bartók, “Crotonaldehyde hydrogenation over clay-supported platinum catalysts”, J. Mole. Catal. A: Chem. 169 (2001) 235–246.
[152] J. Hájek, N. Kumar, P. Mäki-Arvela, T. Salmi, D. Yu. Murzin, “Selective hydrogenation of cinnamaldehyde over Ru/Y zeolite”, J. Mole. Catal. A: Chem. 217 (2004) 145–154.
[153] J. Hájek, J. Väyrynen, “Ruthenium-modified MCM-41 mesoporous molecular sieve and Y zeolite catalysts for selective hydrogenation of cinnamaldehyde”, Appl. Catal. A: Gen. 251 (2003) 385–396.
[154] S. Mukherjee, M. A. Vannice, “Solvent effects in liquid-phase reactions I. Activity and selectivity during citral hydrogenation on Pt/SiO2 and evaluation of mass transfer effects”, J. Catal. 243 (2006) 108–130.
[155] D. V. Sokolskii, N. V. Anisimova, A. K. Zharmagambetova, S. G. Mukhamedzhanova, L. N. Edygenova, “Pt-Fe2O3 catalytic system for hydrogenation reactions”, React. Kinet. Catal. Lett. 33 (1987) 399–406.
[156] G. Cordier, Y. Colleuille, P. Fouilloux, in Catalyse par les Metaux (B. Imelik et al., eds.), Editions du CNRS, Paris, (1984) 349.
[157] G. Cordier, French Patent F 2,329,628 (1975), to Rhone-Poulene S. A.; Chem. Abstr. 87, 38862s (1997)
[158] H. Schaper, J. J. Berg-Slot, W. H. J. Stork, “Texture properties and catalytic of hydrotalcite”, Catal. A: Gen. 54 (1989) 79–87.
[159] M. Date, M. Haruta, “Moisture effect on CO oxidation over Au/TiO2 catalyst”, J. Catal. 201 (2001) 221–224.
[160] P. Maki-Arvela, J. Hajek, T. Salmi, D.Yu. Murzin, “Chemoselective hydrogenation of carbonyl compounds over heterogeneous catalysts-a review”, Appl. Catal. A: Gen. 292 (2005) 1–49.
[161] R. A. Rajadhyaksha, S. L. Karwa, “Solvent effects in catalytic hydrogenation”, Chem. Eng. Sci. 41(7) (1986) 1765–1770. |