參考文獻 |
REFERENCES
1. W. J. Plumbridge, “Review: Solders in Electronics,” Journal of Materials Science, Vol. 31, 1996, pp. 2501-2514.
2. S. K. Kang and A. K. Sarkhel, “Lead (Pb)-Free Solders for Electronic Packaging,” Journal of Electronic Materials, Vol. 23, 1994, pp. 701-707.
3. C. Kanchanomai, S. Yamamoto, Y. Miyashita, Y. Mutoh, and A. J. McEvily, “Low Cycle Fatigue Test for Solders Using Non-Contact Digital Image Measurement System,” International Journal of Fatigue, Vol. 24, 2002, pp. 57-67.
4. M. McCormack and S. Jin, “New, Lead-Free Solders,” Journal of Electronic Materials, Vol. 23, 1994, pp. 635-640.
5. M. Abtew and G. Selvaduray, “Lead-Free Solders in Microelectronics,” Materials Science and Engineering, Vol. 27, 2000, pp. 95-141.
6. D. P. Napp, “Lead Free Interconnect Materials for The Electronics Industry,” SAMPE Journal, Vol. 32, 1996, p. 59.
7. 菅沼 克昭, 鉛付技術, 工業調查會, 日本, 2001. (日文)
8. W. Yang, L. E. Feltion, and R. W. Messler, “The Effect of Soldering Process Variables on the Microstructure and Mechanical Properties of Eutectic Sn-Ag/Cu Solder Joints,” Journal of Electronic Materials, Vol. 24, 1995, pp. 1465-1472.
9. Alloy Phase Diagrams, ASM Handbook, Vol. 3, ASM International, Materials Park, OH, 1992, pp.2.1-2.260.
10. M. McCormack and S. Jin, “Improve Mechanical Properties in New, Pb-Free Solder Alloys,” Journal of Electronic Materials, Vol. 24, 1995, pp. 715-720.
11. Y. Kariya and M. Otsuka, “Effect of Bismuth on the Isothermal Fatigue Properties of Sn-3.5 mass% Ag Solder Alloy,” Journal of Electronic Materials, Vol. 27, 1998, pp. 866-870.
12. Y. Kariya and M. Otsuka, “Mechanical Fatigue Characteristics of Sn-3.5Ag-X (X=Bi, Cu, Zn, and In) Solder Alloys,” Journal of Electronic Materials, Vol. 27, 1998, pp. 1229-1235.
13. J. Glazer, “Microstructure and Mechanical Properties of Pb-Free Solder Alloys for Low-Cost Electronic Assembly: A Review,” Journal of Electronic Materials, Vol. 23, 1994, pp. 693-700.
14. H. D. Solomon, “Low Cycle Fatigue of Sn96 Solder with Reference to Eutectic Solder and a High Pb Solder,” Journal of Electronic Packaging, Vol. 113, 1991, pp. 102-108.
15. P. T. Vianco and A. C. Claghorn, “Effect of Substrate Preheating on Solderability Performance as a Guideline for Assembly Process Development Part 1: Baseline Analysis,” Soldering & Surface Mount Technology, Vol. 24, 1996, pp. 12-18.
16. M. Ohring, Reliability and Failure of Electronic Material and Devices, Academic Press, San Diego, USA, 1998.
17. J. H. Lau, Solder Joint Reliability-Theory and Applications, Van Nostrand Reinhold, New York, USA, 1991.
18. R. P. Skelton, High Temperature Fatigue: Properties and Prediction, Elsevier Applied Science, New York, USA, 1987.
19. W. W. Lee, L. T. Nguyen, and G. S. Selvaduray, “Solder Joint Fatigue Models: Review and Applicability to Chip Scale Packages,” Microelectronics Reliability, Vol. 40, 2000, pp. 231-244.
20. L. F. Coffin, Jr., “A Study of the Effects of Cyclic Thermal Stresses on a Ductile Metal,” Transactions of ASME, Vol. 76, 1954, pp. 931-950.
21. S. S. Manson, “Behavior of Materials under Conditions of Thermal Stress,” Heat Transfer Symposium, University of Michigan Engineering Research Institute, 1953, pp. 9-75.
22. H. D. Solomon, “Fatigue of 60/40 Solder,” IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol. 9, 1986, pp. 423-432.
23. L. F. Coffin Jr., “Fatigue at High Temperature,” pp. 5-34 in Fatigue at Elevated Temperature, ASTM STP 520, Edited by A. E. Carden, A. J. McEvily, and C. H. Wells, American Society for Testing Materials, Philadelphia, PA, 1973.
24. C. Kanchanomai, Y. Miyashita, Y. Mutoh, and S. L. Mannan, “Influence of Frequency on Low Cycle Fatigue Behavior of Pb-Free Solder 96.5Sn-3.5Ag,” Materials Science and Engineering A, Vol. 345, 2003, pp. 90-98.
25. X. Q. Shi, H. L. J. Pang, W. Zhou, and Z. P. Wang, “Low Cycle Fatigue Analysis of Temperature and Frequency Effects in Eutectic Solder Alloy,” International Journal of Fatigue, Vol. 22, 2000, pp. 217-228.
26. W. Engelmaier, “Fatigue Life of Leadless Chip Carrier Solder Joints During Power Cycling,” IEEE Transactions on Components, Hybrids, and Manufacturing Technology, Vol. 6, 1983, pp. 232-237.
27. S. Knecht and L. Fox, “Integrated Matrix Creep: Application to Accelerated Testing and Lifetime Predition,” Chapter 16 in Solder Joint Reliability: Theory and Applications, Edited by J. H. Lau, Van Nostrand Reinhold, New York, 1991.
28. A. R. Syed, “Thermal Fatigue Reliability Enhancement of Plastic Ball Grid Array (PBGA) Packages,” pp. 1211-1216 in Proceedings of the 46th Electronic Components and Technology Conference, Edited by R. R. Tummala and J. E. Billigmeier, Institute of Electrical and Electronics Engineers, New York, NY, 1996.
29. J. A. Collins, Failure of Materials in Mechanical Design: Analysis, Prediction, Prevention, 2nd Ed., John Wiley&Sons, Inc., New York, USA, 1993, pp. 256-258.
30. J. A. Collins, Failure of Materials in Mechanical Design: Analysis, Prediction, Prevention, 2nd Ed., John Wiley&Sons, Inc., New York, USA, 1993, pp. 488-494.
31. Y. Kariya, T. Morihata, E. Hazawa, and M. Otsuka, “Assessment of Low-Cycle Fatigue Life of Sn-3.5 mass% Ag-X (X=Bi or Cu) Alloy by Strain-Range Partitioning Approach,” Journal of Electronic Materials, Vol. 30, 2001, pp. 1184-1189.
32. C. Kanchanomai, Y. Miyashita, and Y. Mutoh, “Low-Cycle Fatigue Behavior and Mechanisms of a Lead-Free Solder 96.5Sn/3.5Ag,” Journal of Electronic Materials, Vol. 31, 2002, pp. 142-151.
33. C. Kanchanomai, Y. Miyashita, and Y. Mutoh, “Low-Cycle Fatigue Behavior of Sn-Ag, Sn-Ag-Cu, Sn-Ag-Cu-Bi, Lead-Free Solders,” Journal of Electronic Materials, Vol. 31, 2002, pp. 456-465.
34. C. Kanchanomai, Y. Miyashita, Y. Mutoh, and S. L. Mannan, “Influence of Frequency on Low Cycle Fatigue Behavior of Pb-Free Solder 96.5Sn-3.5Ag,” Materials Science and Engineering A, Vol. 345, 2003, pp. 90-98.
35. C. Kanchanomai and Y. Mutoh, “Effect of Temperature on Isothermal Low Cycle Fatigue Properties of Sn-Ag Eutectic Solder,” Materials Science and Engineering A, Vol. 381, 2004, pp. 113-120.
36. C. Kanchanomai and Y. Mutoh, “Low-Cycle Fatigue Prediction Model for Pb-Free Solder 96.5Sn-3.5Ag,” Journal of Electronic Materials, Vol. 33, 2004, pp. 329-333.
37. J. H. L. Pang, “Low Cycle Fatigue Study of Lead Free 99.6Sn-0.7Cu Solder Alloy,” International Journal of Fatigue, Vol. 26, 2004, pp. 865-872.
38. J. H. L. Pang, “Low Cycle Fatigue Models for Lead-Free Solders,” Thin Solid Films, Vol. 462-463, 2004, pp. 408-412.
39. K. S. Kim, S. H. Huh, and K. Suganuma, “Effects of Cooling Speed on Microstructure and Tensile Properties of Sn-Ag-Cu Alloys,” Materials Science and Engineering A, Vol. 333, 2002, pp. 106-114.
40. “Standard Practice for Strain-Controlled Fatigue Testing,” ASTM E606-92, Annual Book of ASTM Standards, Vol. 3.01, American Society for Testing and Materials, West Conshohocken, PA, USA, 1998, pp. 528-542.
41. H.-C. Tseng, “Low-Cycle Fatigue Behavior of Lead-Free Solders for Electronic Packaging Use,” M.S. Thesis, National Central University, Jhong-Li, Taiwan, 2003. (in Chinese)
42. Keyence LS-7500 Series User’s Manual, Keyence Co., Osaka, Japan, 2001.
43. M. E. Loomans and M. E. Fine, “Tin-Silver-Copper Eutectic Temperature and Composition,” Metallurgical and Materials Transactions A, Vol. 31A, 2000, pp.1155-1162.
44. K. W. Moon, W. J. Boettinger, U. R. Kattner, F. S. Biancaniello, and C. A. Handwerker, “Experimental and Thermodynamic Assessment of Sn-Ag-Cu Solder Alloys,” Journal of Electronic Materials, Vol. 29, 2000, pp. 1122-1136.
45. S. L. Mannan, “Role of Dynamic Strain Aging in Low Cycle Fatigue,” Bulletin of Materials Science, Vol. 16, 1993, pp. 561-582.
46. R. E. Read-Hill and R. Abbaschian, Physical Metallurgy Principles, 3rd Ed., PWS Publishing Company, Inc., Boston, USA, 1994, pp. 294-298.
47. W. Schutz, “Fatigue Life Prediction for Aircraft Structure and Materials,” NATO AGARD-LS-62, 1973, pp. 10-1~10-32.
48. C.-K. Lin and Y.-L. Pai, “Low-Cycle Fatigue of Austempered Ductile Irons at Various Strain Ratios,” International Journal of Fatigue, Vol. 21, 1999, pp. 45-54.
49. J. A. Collins, Failure of Materials in Mechanical Design: Analysis, Prediction, Prevention, 2nd Ed., John Wiley&Sons, Inc., New York, USA, 1993, pp. 401-404.
50. K. Ohji, W. R. Miller, and J. Marin, “Cumulative Damage and Effect of Mean Strain in Low Cycle Fatigue of a 2024-T351 Aluminum Alloy,” Journal of Basic Engineering, ASME Transactions, Vol. 88, Series D, 1966, p. 801.
51. D.-Y. Chu, “Creep Behavior of Sn-3.5Ag and Sn-3.5Ag-0.5Cu Lead-Free Solders,” M.S. Thesis, National Central University, Jhong-Li, Taiwan, 2004.
52. J. K. Tien, S. V. Nair, and V. C. Nardone, “Creep-Fatigue Interaction in Structural Alloys,” pp. 179-213 in Flow and Fracture at Elevated Temperatures, Edited by R. Raj, Carnes Publication Services, Inc., Philadelphia, USA, 1983.
53. C. Gandhi, “Fracture Mechanism Maps for Metals and Alloys,” pp. 83-119 in Flow and Fracture at Elevated Temperatures, Edited by R. Raj, Carnes Publication Services, Inc., Philadelphia, USA, 1983. |