參考文獻 |
Allen, R.F., 1975, The role of surface tension in splashing, J. Colloid Interface Sci., 51(2), 350-351.
Asai, A., Shioya, M., Hirasawa, S., Okazaki, T., 1993, Impact of an Ink Drop on Paper, J. Imaging Sci. Technol., 37, 205-207.
Aziz, S.D., Chandra, S., 2000, Impact, recoil and splashing of molten metal droplets, Int. J. Heat Mass Transf., 43, 2841-2857.
Bai, C.X., Rusche, H., Gosman, A.D., 2002, Modeling of gasoline spray impingement, Atom. Sprays, 12, 1-28.
Bassette, C., Bussière, F., 2008, Partitioning of splash and storage during raindrop impacts on banana leaves, Agric. For. Meteorol., 148(6-7), 991-1004.
Bergeron, V., Bonn, D., Martin, J.Y., Vovelle, L., 2000, Controlling Droplet Deposition with Polymer Additives, Nature, 405, 772-775.
Bird, J.C., Tsai, S.S.H., Stone, H.A., 2009, Inclined to splash: triggering and inhibiting a splash with tangential velocity, New J. Phys., 11, 063017(1-10).
Bhola, R., Chandra, S., 1999, Parameters controlling solidification of molten wax droplets falling on a solid surface, J. Mater. Sci., 34, 4883-4894.
Bussmann, M., Mostaghimi, J., Chandra, S., 1999, On a three-dimensional volume tracking model of droplet impact, Phys. Fluids, 11(6), 1406-1417.
Chandra, S., Avedisian, C.T., 1991, On the collision of a droplet with a solid surface, Proc. R. Soc. Lond. Ser. A, 432(1884),13-41.
Chang Y.W., Ukiwe, C., Kwok, D.Y., 2005, Chain length effect of alkanethiol self-assembled monolayers on the maximum spreading ratio of impacting water droplets, Colloid Surf. A-Physicochem. Eng. Asp., 260, 255-263.
Chen, R.H., Wang, H.W., 2005, Effects of tangential speed on low-normal-speed liquid drop impact on a non-wettable solid surface, Exp. Fluids, 39, 754-760.
Chen, R.H., Chiu, S.L., Lin, T.H., 2007, On the collision behaviors of a diesel drop impinging on a hot surface, Exp. Therm. Fluid Sci., 32, 587-595.
Clanet, C., Béguin, C., Richard, D., Quéré D., 2004, Maximal deformation of an impacting drop, J. Fluid Mech., 517, 199-208.
Cossali, G.E., Coghe, A., Marengo, M., 1997, The impact of a single drop on a wetted solid surface, Exps. Fluids, 22, 463-472.
Courbin, L., Bird, J.C., Stone, H.A., 2008, “Black hole” nucleation in a splash of milk, Phys. Fluids, 20, 091106.
Dong, H., Carr, W.W., Bucknall, D.G.., Morris J.F., 2007, Temporally -resolved inkjet drop impaction on surfaces, AICHE J., 53(10), 2606-2617.
Engel, O.G.., 1955, Waterdrop Collision with Solid Surface, J. Res. Natn. Bur. Stand., 54(5), 281-298.
Extrand C.W., Kumagai Y., 1997, An Experimental Study of Contact Angle Hysteresis, J. Colloid Interface Sci., 191, 378-383.
Fathi, S., Dickens, P., Fouchal F., 2010, Regimes of droplet train impact on a moving surface in an additive manufacturing process, J. Mater. Process. Technol., 210, 550–559.
Fujimoto, H., Shiotani, Y., Tong, A.Y., Hama, T., Takuda, H., 2007, Three -dimensional numerical analysis of the deformation behavior of droplets impinging onto a solid substrate, Int. J. Multiph. Flow, 33, 317-332.
Fukai, J., Tanaka, M., Miyatake, O., 1998, Maximum spreading of liquid droplets colliding with flat surfaces, J. Chem. Eng. Jpn., 31(3), 456-461.
Galvin, K.P., Cork, A., Wall, T.F., 1996, Droplet impaction with a substrate the critical condition for detachment, Colloid Surf. A-Physicochem. Eng. Asp., 113, 107-116.
Haller, K.K., Ventikos, Y., Poulikakos D., 2002, Computational study of high-speed liquid droplet impact, J. Appl. Phys., 92(5), 2821-2828
Hardalupas, Y., Taylor, A.M.K.P., Wilkins, J.H., 1999, Experimental investigation of sub-millimetre droplet impingement onto spherical surfaces, Int. J. Heat Fluid Flow, 20, 477-485.
Healy, W.M., Hartley, J.G., Abdel-Khalik, S.I., 2001, Surface wetting effects on the spreading of liquid droplets impacting a solid surface at low Weber numbers, Int. J. Heat Mass Transf., 44, 235-240.
Kalantari, D., Tropea, C., 2007, Spray impact onto flat and rigid walls: Empirical characterization and modeling, Int. J. Multiph. Flow, 33, 525-544.
Kang, B.S., Lee, S.H., 2000, On the dynamic behavior of a liquid droplet impacting upon an inclined surface, Exp. Fluids, 29, 380-387.
Karl, A., Frohn, A., 2000, Experimental investigation of interaction process between droplets and hot walls, Phys. Fluids, 12(4), 785-796.
Kim, H.Y., Chun, J.H., 2001, The recoiling of liquid droplets upon collision with solid surfaces, Phys. Fluids, 13(3), 643-659.
Lavergne G., Platet B., 2000, Droplet impingment on cold and wet wall, Proceedings of the 16th International Conference on Liquid Atom and Spray-Systems–ILASS-Europe 2000, paper VII.12.
Leneweit, G., Koehler, R., Roesner, K.G., Schaefer, G., 2005, Regimes of drop morphology in oblique impact on deep fluids, J. Fluid Mech. 543, 303–331.
Madejski, 1976, Solidification of droplets on a cold substrate, Int. J. Heat Mass Transf., 19, 1009-1013.
Mao T.M., Kuhn D.C.S., Tran H., 1997, Spread and rebound of liquid droplets upon impact on flat surfaces. AICHE J., 43(9), 2169-2179.
Marmanis, H., Thoroddsen, S.T., 1996, Scaling of the fingering pattern of an impacting drop. Phys. Fluids, 8(6), 1344-1346.
Mehdizadeh, N.Z., Chandra, S., Mostaghimi, J., 2004, Formation of fingers around the edges of a drop hitting a metal plate with high velocity, J. Fluid Mech., 510, 353-373.
Moita, A.S., Moreira, A.L.N., 2007, Drop impacts onto cold and heated rigid surfaces: Morphological comparisons, disintegration limits and secondary atomization, Int. J. Heat Fluid Flow, 28,735-752.
Moreira, A.L.N., Moita, A.S., Cossali, E., Marengo, M., Santini, M., 2007, Secondary atomization of water and isooctane drops impinging on tilted heated surfaces, Exp. Fluids, 43, 297-313.
Mundo, C., Sommerfeld, M., Tropea, C., 1995, Droplet-wall collisions: experimental studies of the deformation and breakup process, Int. J. Multiph. Flow, 21(2), 151-173.
Mundo, C., Sommerfeld, M., Tropea, C., 1998, On the modeling of liquid sprays impinging on surfaces, Atom. Sprays, 8, 625-652.
Okawa, T., Shiraishi, T., Mori, T., 2008, Effect of impingement angle on the outcome of single water drop impact onto a plane water surface, Exp. Fluids, 44, 331-339.
Panão, M.R.O., Moreira, A.L.N., 2004, Experimental study of the flow regimes resulting from the impact of an intermittent gasoline spray, Exp. Fluids, 37, 834-855.
Park, H., Carr, W.W., Zhu, J., Morris, J.E., 2003, Single drop impaction on a solid surface, AICHE J., 49(10), 2461-2471.
Pasandideh-Fard, M., Bhola, R., Chandra, S., Mostaghimi, J., 1998, Deposition of tin droplets on a steel plate: simulations and experiments, Int. J. Heat Mass Transf., 41, 2929-2945.
Pasandideh-Fard, M., Qiao, Y.M., Chandra, S., Mostaghimi, J., 1996, Capillary effects during droplet impact on a solid surface, Phys. Fluids, 8(3), 650-659.
Pepper, R.E., Courbin, L., Stone, H.A., 2008, Splashing on elastic membranes: The importance of early-time dynamics, Phys. Fluids, 20, 082103(1-8).
Povarov, O.A., Shalnev, K.K., Nazarov, O.I., Shalobasov, I.A., 1976, Collision of droplets with a moving plane surface, Sov. Phys. Dokl., 20(11), 782-783.
Range, K., Feuillebois, F., 1998, Influence of surface roughness on liquid drop impact, J. Colloid Interface Sci., 203, 16-30.
Rein, M., 1993, Phenomena of liquid drop impact on solid and liquid surfaces. Fluid Dyn. Res., 12, 61-93.
Rein M., Delplanque J. P., 2008, The role of air entrainment on the outcome of drop impact on a solid surface, Acta Mech., 201, 105-118.
Rieber, M., Frohn, A., 1999, A numerical study on the mechanism of splashing, Int. J. Heat Fluid Flow, 20, 455-461.
Rioboo, R., Marengo, M., Tropea, C., 2002, Time evolution of liquid drop impact onto solid, dry surfaces, Exp. Fluids, 33, 112-124.
Rioboo, R., Tropea, C., Marengo, M., 2001, Outcomes from a drop impact on solid surfaces, Atom. Sprays, 11, 155-165.
Roisman, I.V., Horvat, A.K, Tropea, C., 2006, Spray impact: Rim transverse instability initiating fingering and splash, and description of a secondary spray, Phys. Fluids, 18, 102104(1-19).
Roisman, I.V., Rioboo, R., Tropea, C., 2002, Normal impact of a liquid drop on a dry surface: model for spreading and receding, Proc. R. Soc. Lond. Ser. A, 458, 1411-1430.
Roux D.C.D., Cooper-White J.J., 2004, Dynamics of water spreading on a glass surface, J. Colloid Interface Sci., 277, 424-436.
Scheller, B.L., Bousfield, D.W., 1995, Newtonian drop impact with a solid surface, AICHE J., 41(6), 1357-1367.
Schiaffino S., Sonin A.A., 1997, Molten droplet deposition and solidification at low Weber numbers, Phys. Fluids, 9(11), 3172-3187.
Schlichting H., Gersten K., 1979, Boundary-Layer Theory 7th, New York: McGraw-Hill, 26-27.
Šikalo, Š., Marengo, M., Tropea, C., Ganić, E.N., 2002, Analysis of impact of droplets on horizontal surfaces, Exp. Therm. Fluid Sci., 25, 503-510.
Šikalo, Š., Tropea, C., Ganić, E.N., 2005, Impact of Droplets onto inclined surfaces, J. Colloid Interface Sci., 286, 661-669.
Šikalo, Š., Ganić, E.N., 2006, Phenomena of droplet–surface interactions, Exp. Therm. Fluid Sci., 31, 97-110.
Sobolev, V.V., Guilemany, J.M., 1998, Influence of droplet impact angle on droplet-substrate mechanical interaction in thermal spraying, Mater. Lett., 33, 315-319.
Stow, C.D., Hadfield, M.G., 1981, An experimental investigation of fluid flow resulting from the impact of a water drop with an unyielding dry surface. Proc. R. Soc. Lond. Ser. A, 373, 419-441.
Sumner, J.M., Blake, S., Matela, R.J., Wolff, J.A., 2005, Spatter, J. Volcanol. Geotherm. Res., 142, 49-65.
Thoroddsen, S. T., 2002, The ejecta sheet generated by the impact of a drop, J. Fluid Mech., 451, 373-381.
Thoroddsen, S.T., Sakakibara, J., 1998, Evolution of the fingering pattern of an impacting drop, Phys. Fluids, 10(6), 1359-1374.
Vander Wal, R.L., Berger, G.M., Mozes, S.D., 2006, The combined influence of a rough surface and thin fluid film upon the splashing threshold and splash dynamics of a droplet impacting onto them, Exp. Fluids, 40, 23-32.
Wang, A.B., Lin, C.H., Chen, C.C., 2000, The critical temperature of dry impact for tiny droplet impinging on a heated surface, Phys. Fluids, 12(6), 1622-1625.
Wu, L., Bogy, D.B., 2001, A generalized compressible Reynolds lubrication equation with bounded contact pressure, Phys. Fluids, 13(8), 2237-2244
Wu, X., Squires, K. D., 2000, Prediction and investigation of the turbulent flow over a rotating disk, J. Fluid Mech., 418, 231-264.
Xu, L., Zahang, W.W., Nagel, S.R., 2005, Drop splashing onto a dry smooth surface, Phys. Rev. Lett., 94, 184505(1-4).
Xu, L., 2007, Liquid drop splashing on smooth, rough and textured surfaces, Phys. Rev. E 75, 056316(1-8).
Yang, C., Leong, K.C., 2002, Influences of substrate wettability and liquid viscosity on isothermal spreading of liquid droplets on solid surfaces, Exp. Fluids 33, 728-731.
Yarin, A.L., 2006, Drop Impact Dynamics: Splashing, Spreading, Receding, Bouncing . . ., Annu. Rev. Fluid. Mech., 38, 159-192.
Yao, S.C., Cai, K.Y., 1988, The dynamics and Leidenfrost temperature of drops impacting on a hot surface at small angles, Exp. Therm. Fluid Sci., 1, 363-371.
Zhang, X., Basaran, O.A., 1997, Dynamic surface tension effects in impact of a drop with a solid surface, J. Colloid Interface Sci., 187, 166-178.
李克威,2006,液滴撞擊旋轉表面研究,國立中央大學機械工程碩士論文
|