參考文獻 |
李俊霖(1997)「二元Shewhart管制法則之研究與應用─針對多變量特性之製程」,碩士論文,國立台灣大學工業工程學研究所。
葉珮甄(1998)「多變量統計製程管制 應用在具有多種變異來源的製程上─以半導體製程為例」,碩士論文,國立臺灣大學工業工程學研究所。
王亞倫(1999)「診斷多變量管製圖之研究」,碩士論文,國立中央大學工業管理研究所。
顏家鈴(2001)「監控多變量製程變異性增加之管制圖」,碩士論文,國立交通大學統計所。
吳建瑋(2001)「監控單一觀測值之多變量製程變異性管制圖」,碩士論文,國立清華大學統計學研究所。
吳政儀(2001)「在單一觀測值下監控多變量製程變異性之EWMA管制圖」,碩士論文,國立清華大學統計學研究所。
游明新(2002)「多變量管制圖之比較與探討」,碩士論文,雲林科技大學工業工程與管理研究所。
黃立芬(2002)「監控多變量製程變異性增加之EWMA管制圖」,碩士論文,國立交通大學統計所。
蘇俊虢(2003)「非常態性對T2管制圖的效應評估」,碩士論文,中原大學工業工程研究所。
Alt, F.B. (1985). Multivariate Quality Control, The Encyclopedia of Statistical Sciences, Kotz S., Johnson, N. L. and Read, C. R. (eds), John Wiley & Sons, New York.
Alt, F. B. and Smith, N. D. (1988). Multivariate Process Control, Handbook of Statistics, P. R. Krishnaiah and C. R. Rao (eds), North-Holland: Elsevier Science Publishers B.V., 7.
Anderson, T. W. (1984). An Introduction to Multivariate Statistical Analysis,
2th edition, John Wiley & Sons, New York.
Aparisi, F.; Jabaloyes, J. and Carrion, A. (1999). “Statistical Properties of
the S Multivariate Control Chart”. Communications in Statistics -
Theory and Methods, 28(11), pp.2671-2686.
Aparisi, F.; Jabaloyes, J. and Carrion, A. (2001). “Generalized Variance
Chart Design with Adaptive Sample Sizes. The Bivariate Case”.
Communications in Statistics - Simulation and Computation, 30(4), pp.
931-948.
Champ, C. W. and Chou, S. P. (2003). “Comparisons of Standard and
Individuals Limits Phase I Shewhart X , R and S Charts”. Quality
and Reliability Engineering International, 19(2), pp. 161-170.
Chang, T. C. and Gan, F. F. (1995). “A Cumulative Sum Control Chart for
Monitoring Process Variance”. Journal of Quality Technology, 27(2),
pp. 109-119.
Crosier, R. B. (1988). “Multivariate Generalizations of Cumulative Sum
Quality-Control Schemes”. Technometrics, 30(3), pp. 291-303.
Crowder, S. V. and Hamilton, M. (1992). “An EWMA for Monitoring a
Standard Deviation”. Journal of Quality Technology, 24(1), pp. 12-21.
Djauhari, M. A. (2005). “Improved Monitoring of Multivariate Process
Variability”. Journal of Quality Technology, 37(1), pp. 32-39.
Domangue, R. and Patch, S. C. (1991). “Some Omnibus Exponentially
Weighted Moving Average Statistical Process Monitoring Schemes”.
Technometrics, 33(3), pp. 299-313.
Grigoryan, A. and He, D. (2005). “Multivariate double sampling S charts for
controlling process variability”. International Journal of Production
Research, 43(4), pp. 715-730.
Hawkins, D. M. and Olwell, D. H. (1998). Cumulative Sum Charts and
Charting for Quality Improvement, Springer Verlag, New York.
Healy, J. D. (1987). “A Note on Multivariate CUSUM Procedures”.
Technometrics, 29(4), pp. 409-412.
Khoo, B. C. and Quah, S. H. (2003). “Multivariate Control Chart for Process
Dispersion Based on Individual Observations”. Quality Engineering,
15(4), pp. 639-642.
Klein, M. (2000). “Modified S-Charts for Controlling Process Variability”.
Communications in Statistics - Simulation and Computation, 29(3), pp.
919-940.
Lowry, C. A. ; Champ, C. W., and Woodall, W. H. (1995). “The
Performance of Control Charts for Monitoring Process Variation”.
Communications in Statistics – Simulation and Computation, 24(1-2),
pp. 409-437.
Lowry, C. A.; Woodall, W. H.; Champ, C. W. and Rigdon, S. E. (1992). “A
Multivariate EWMA Control Chart”. Technometrics, 34(1), pp. 46-53.
Lucas, J. M. and Saccucci, M. S. (1990). “Exponentially Weighted Moving
Average Control Schemes: Properties and Enhancements”.
Technometrics, 32(1), pp. 1-12.
MacGregor, J. F. and Harris, T. J. (1993). “The Exponentially Weighted
Moving Variance”. Journal of Quality Technology, 25(2), pp. 106-118.
Mason, R. L.; Chou, Y. M.; Sullivan, J. H.; Stoumbos, Z. G. and Young, J. C.
(2003). “Systematic Patterns in T2 Charts”. Journal of Quality
Technology, 35(1), pp.47-58.
Mason, R. L.; Chou, Y. M. and Young, J. C. (2001). “Applying Hotelling’s
T2 statistic to Batch Processes”. Journal of Quality Technology, 33(4),
pp. 466-479.
Mason, R. L.; Tracy, N. D. and Young, J. C. (1995). “Decomposition for
Multivariate Control Chart Interpretation”. Journal of Quality
Technology, 27(2), pp. 99-108.
Mason, R. L.; Tracy, N. D. and Young, J. C. (1997). “A Practical Approach
for Interpreting Multivariate T2 Control Chart Signals”. Journal of
Quality Technology, 29(4), pp. 396-406.
Mason, R. L.; Tracy, N. D. and Young, J. C. (1999). “Improving the
Sensitivity of the T2 Statistic in Multivariate Process Control”. Journal
of Quality Technology, 31(2), pp. 155-165.
McKay, R. J. (1989). “Simultaneous procedures for covariance matrices”.
Communications in Statistics - Theory and Methods, 18(2), pp.
429-443.
Montgomery, D. C. (2001). Introduction to Statistical Quality Control, 4th
Edition. John Wiley & Sons, New York.
Pignatiello, J. J. and Runger, G. C. (1990). “Comparisons of Multivariate
CUSUM Charts”. Journal of Quality Technology, 22(3), pp. 173-186.
Prabhu, S. S. and Runger, G. C. (1997). “Designing a Multivariate EWMA
Control Chart”. Journal of Quality Technology, 29(1), pp. 8-15.
Reynolds, M. R.; Amin, R. W.; Arnold, J. C. and Nachlas, J. A. (1988). “ X
Charts with Variable Sampling Intervals”. Technometrics, 30(2), pp.
181-192.
Roes, K. C. B., Does, R. J. M. M. and Schuring, Y. (1993). “Shewhart-type
Control Charts for Individual Observations”. Journal of Quality
Technology, 25(3), pp. 188-198.
Runger, G. C.; Keats, J. B.; Montgomery, D. C. and Scranton, R. D. (1999).
“Improving the Performance of the Multivariate EWMA Control
Chart”. Quality and Reliability Engineering International, 15(3), pp.
161-166.
Sim, C. H. (2000). “S-Chart for Non-Gaussian Variables”. Journal of
Statistical Computation and Simulation, 65(2), pp. 147-156.
Srivastava, M. S. (1997). “CUSUM procedure for Monitoring Variability”.
Communications in Statistics - Theory and Methods, 26(12), pp.
2905-2926.
Steiner, S. H. (1999). “EWMA Control Charts with Time-Varying Control
Limits and Fast Initial Response”. Journal of Quality Technology, 31(1),
pp. 75-86.
Sullivan, J. H. and Woodall, W.H. (1996a). “A Control Chart for
Preliminary Analysis of Individual Operations”. Journal of Quality
Technology, 28(3), pp. 265-278.
Sullivan, J. H. and Woodall, W. H. (1996b). “A Comparison of Multivariate
Control Charts for Individual Observations”. Journal of Quality
Technology, 28 (4), pp. 398-408.
Tang, P. F. and Barnett, N. S. (1996a). “Dispersion Control for Multivariate
Processes”. The Australian Journal of Statistics, 38(3), pp. 235-251.
Tang, P. F. and Barnett, N. S. (1996b). “Dispersion Control for Multivariate
Processes- some comparisons”. The Australian Journal of Statistics,
38(3), pp. 253-273.
Tracy, N. D.; Young, J. C. and Mason, R. L. (1992). “Multivariate Control
Charts for Individual Observations”. Journal of Quality Technology,
24(2), pp. 88-95.
Tsung, F. and Apley, D. W. (2002). “The dynamic T2 Chart for monitoring
feedback - controlled processes”. IIE Transactions, 34(12), pp.
1043-1053.
Vargas, J. A. (2003). “Robust Estimation in Multivariate Control Charts for
Individual Observations”. Journal of Quality Technology, 35(4), pp.
367-376.
Woodall, W. H. (1997). “Control Charts Based on Attribute Data:
Bibliography and Review”. Journal of Quality Technology, 29(2), pp.
172-183.
Woodall, W. H. and Ncube, M. M. (1985). “Multivariate CUSUM Quality
Control Procedures”. Technometrics, 27(3), pp. 285-292. |