參考文獻 |
[1] J. Larminie, A. Dicks, Fuel Cell Systems Explained, New York, Wiley, (2000).
[2] V.A. Paganin, E.A. Ticianelli, E.R. Gonzalez, “Development of small
polymer electrolyte fuel cell stacks,” Journal of Power Source, V. 70, pp.55-58, (1998).
[3] L.M. Abriola, G.F. Pinder, “A Multiphase Approach to the
Modeling of Porous Media Contamination by Organic Compounds Ⅰ., Equation Development,” Water Resources Research, V. 21, N. 1, pp.11-18, (1985).
[4] L.M. Abriola, G.F. Pinder, “A Multiphase Approach to the
Modeling of Porous Media Contamination by Organic Compounds Ⅱ., Numerical Simulation,” Water Resources Research, V. 21, N. 1, pp.19-26, (1985).
[5] C.Y. Wang, C. Beckermann, “A two-phase mixture model of
liquid-gas flow and heat transfer in capillary porous media Ⅰ. Formulation,” Int. J. Heat Mass Transfer, V. 36, N. 11, pp.2747-2758, (1993).
[6] C.Y. Wang, C. Beckermann, “A two-phase mixture model of
liquid-gas flow and heat transfer in capillary porous media Ⅱ., Application to pressure-driven boiling flow adjacent to a vertical heated plate,” Int. J. Heat Mass Transfer, V. 36, N. 11, pp.2759-2768, (1993).
[7] C.Y. Wang, P. Cheng, “A multiphase mixture model for multiphase
multi-component transport in capillary porous media Ⅰ., model development,” Int. J. Heat Mass Transfer, V.39, N. 17, pp.3607-3618, (1996).
[8] C.Y. Wang, P. Cheng, “A multiphase mixture model for multiphase,
multi-component transport in capillary porous media Ⅱ., Numerical simulation of the transport of organic compounds in the subsurface,” Int. J. Heat Mass Transfer, V. 39, N. 17, pp.3619-3632, (1996).
[9] C.Y. Wang, P. Cheng, “Multiphase Flow and Heat Transfer in Porous
Media,” Advances in Heat Transfer, V.30, pp.93-189, (1997).
[10] P. Ekdunge, K. Broka, “Modeling the PEM Fuel Cell Cathode,” J.
Appl. Electrochem., V. 27, pp.281, (1997).
[11] D. Singh, D.M. Lu, N. Djilali, “A two-dimensional analysis of mass
transport in proton exchange memebrane fuel cells,” Int. J. Engineering Science, V. 37, pp.431-452, (1998).
[12] D.L. Wood, Ⅲ, J.S. Yi and T.V. Nguyen, “Effect of direct liquid water injection and interdigitated flow field on the performance of PEMFC,” Electrochimica. Acta., V. 43, N. 24, pp.3795-3809, (1998).
[13] J.S. Yi, T.V. Nguyen, “Multicomponent Transport in Porous Electrodes of Proton Exchange Membrane Fuel Cells Using the Interdigitated Gas Distributors,” J. Electrochemical Society, V. 146, pp.38-45, (1999).
[14] S. Um, C.Y. Wang, K.S. Chen, “Computational Fluid Dynamics Modeling of Proton Exchange Membrane Fuel Cells,” J. Electro- chemical Society, V.147, pp.4485-4493, (2000).
[15] L.R. Jordan, A.K. Shukla, T. Behrsing, N.R. Avery, B.C. Muddle, M.
Forsyth, “Diffusion layer parameters influencing optimal fuel cell performance,” J. Power Sources, V. 86, pp.250-254, (2000).
[16] I.M. Hsing, P. Futerko, “Two-dimensional simulation of water
transport in polymer electrolyte fuel cells,” Chemical Engineering Science, V.55, pp.4209-4218, (2000).
[17] R. Bradean, K. Promislow, B. Wetton, “Transport phenomena in the
porous cathode of a proton exchange membrane fuel cell,” Numerical Heat Transfer, Part A, V. 42, pp.121-138, (2002).
[18] H.T. Liu, T.H. Zhou, “Numerical simulation of performance of PEM fuel cells,” International Conference on Computational Heat and Mass Transfer.
[19] Z.H. Wang, C.Y. Wang, K.S. Chen, “Two-phase flow and transport in the air cathode of proton exchange membrane fuel cells,” J. Power Sources, V. 94, pp. 40-50, (2001).
[20] T. Berning, D.M. Lu, N. Djilali, “Three-dimensional computational
analysis of transport phenomena in a PEM fuel cell,” J. Power Sources, V.106, pp.284-294, (2002).
[21] L. You, H.T. Liu, “A two-phase flow and transport model for
the cathode of PEM fuel cells,” Int. J. Heat Mass Transfer, V. 45, pp. 2277-2287, (2002).
[22] L.B. Wang, N.I. Wakayama, T. Okada, “Numerical simulation of a new water management for PEM fuel cell using magnet particles deposited in the cathode side catalyst layer,” Electrochemistry Communications, V. 4, pp. 584-588, (2002).
[23] A. Kumar, R.G. Reddy, “Modeling of polymer electrolyte
membrane fuel cell with metal foam in the flow-field of the bipolar/end plates,” J. Power Sources, V. 114, pp.54-62, (2003).
[24] J. Soler, E. Hontañón, L. Daza, “Electrode permeability and
flow-field configuration influence on the performance of a PEMFC,” J. Power Sources, V. 118, pp. 172-178, (2003).
[25] L. Wang, A. Husar, T. Zhou, H.T. Liu, “A parametric study of PEM fuel cell performances,” Int. J. Hydrogen Energy, V. 28, pp. 1263-1272, (2003).
[26] P.W. Li, L. Schaefer, Q.M. Wang, T. Zhang, M.K. Chyu, “Multi-gas transportation and electrochemical performance of a polymer electrolyte fuel cell with complex flow channels,” J. Power Sources, V. 115, pp. 90-100, (2003).
[27] H.S. Chu, C. Yeh, F. Chen, “Effects of porosity change of gas diffuser on performance of proton exchange membrane fuel cell,” J. Power Sources, V. 123, pp.1-9, (2003).
[28] N.P. Siegel, M.W. Ellis, D.J. Nelson, M.R. von Spakovsky, “A
two-dimensional computational model of a PEMFC with liquid water transport,” J. Power Sources, V. 128, pp. 173-184, (2004).
[29] J.J. Hwang, C.K. Chen, R.F. Savinell, C.C. Liu, J. Wainright, “A
three-dimensional numerical simulation of the transport phenomena in the cathodic side of a PEMFC,” J. Applied Electrochemistry, V. 34, pp. 217-224, (2004).
[30] G. Hu, J. Fan, S. Chen, Y. Liu, K. Cen, “Three-dimensional numerical analysis of proton exchange membrane fuel cells (PEMFCs) with conventional and interdigitated flow fields,” J. Power Sources, V. 136, pp. 1-9, (2004).
[31] M. Hu, A. Gu, M. Wang, X. Zhu, L. Yu, “Three dimensional, two phase flow mathematical model for PEM fuel cell: Part Ⅰ. Model development,” Energy Conversion and Management, V. 45, pp. 1861-1882, (2004).
[32] M. Hu, X. Zhu, M. Wang, A. Gu, L. Yu, “Three dimensional, two pahse flow mathematical model for PEM fuel cell: PartⅡ. Analysis and discussion of the internal transport mechanisms,” Energy Conversion and Management, V. 45, pp. 1883-1916, (2004).
[33] S. Shimpalee, S. Greenway, D. Spuckler, J.W. Van Zee, “Predicting
water and current distributions in a commerical-size PEMFC,” J. Power Sources, V. 135, pp. 79-87, (2004).
[34] U. Pasaogullari, C.Y. Wang, “Liquid Water Transport in Gas
Diffusion Layer of Polymer Electrolyte Fuel Cells,” J. Electrochemical Society, V. 151, A399-A406, (2004).
[35] U. Pasaogullari, C.Y. Wang, “Two-phase transport and the role of
micro-porous layer in polymer electrolyte fuel cells,” Electrochimica Acta, V. 49, pp. 4359-4369, (2004).
[36] 黃柏瑄,PEMFC電極及觸媒層之電熱流傳輸現象探討,國立中央大學,91年7月。
[37] 羅世坤,流場設計對質子交換膜燃料電池性能之研究,國立中央大學,92年6月。
[38] M. Kaviany, Principles of Heat Transfer in Porous Media, New York, Springer-Verlag, (1995).
[39] A. Bejan, D.A. Nield, Convection in Porous Media, New York, Springer-Verlag, (1992).
[40] KR Weisbrod, SA Grot, NE Vanderborgh, “Through-the-eletrode
model of a proton exchange membrane fuel cell,” Electrochem. Soc. Proc., (1995).
[41] D.M. Bernardi, M.W. Verbrugge, “Mathematical model of a gas duffusion electrode bonded to a polymer electrolyte,” AIChE J., V. 37, pp. 1151-1163, (1991).
[42] D.M. Bernardi, M.W. Verbrugge, “A mathematical model of the solid-polymer-electrolyte fuel cell,” J. Electrochem. Soc., V. 139, pp. 2477-2491, (1992).
[43] A. Parthasarathy, S. Srinivasan, A. John Appleby, “Temperature Dependence of the Electrode Kinetics of Oxygen Reduction at the Platinum/Nafion Interface – A Microelectrode Investigation,” J. Electrochem. Soc., V. 139, pp. 2530-2537, (1992).
[44] W. Nernst, “Zur Kinetik der in Lösung befindlichen Körper:Ⅰ.
Theorie der Diffusion,” Z. Physik Chem., V. 2, pp.613, (1888).
[45] W. Nernst, “Die Elektromotorische Wirksamkeit der Jonen:Ⅰ.
Theorie der Diffusion,” Z. Physik Chem., V. 4, pp. 129, (1889).
[46] M. Planck, “Ueber die Erregung vol Electricität und Wärme in
Electrolyten,” Ann. d. Phys. u. Chem., V. 39, pp. 161, (1890).
[47] S.V. Patankar, Numerical Heat Transfer and Fluid Flow, New York , McGraw-Hill, (1980).
[48] E.L. Cussler, Diffusion, mass transfer in fluid systems, New York, Cambridge, (1984).
[49] F.P. Incropera, D.P. DeWitt, Fundamentals of Heat and Mass Transfer, New York, Wiley, (1996).
[50] K.Z. Yao, K. Karan, K.B. McAuley, P. Oosthuizen, B. Peppley, T. Xie, “A Review of Mathematical Models for Hydrogen and Direct Methanol Polymer Electrolyte Membrane Fuel Cells,” Fuell Cells, V. 4, pp. 3-29, (2004). |