摘要(英) |
In the direct-light-type backlight module, light sources are placed under LCD panel directly that we could see stripes easily. So uniformity is the important property to pay attention. The common method is using optical ray-tracing of business software to simulate in what condition that we could get best uniformity. But using them costs a lot of time and they have no optimum function. It can not satisfy speedy simulation of requirement to design and research. Therefore, the target is point at using self-establish program to show the rays in backlight module for ray-tracing and to gather statistics about distribution of illumination. Finally find the optimal solution of all results of conditions and using optical software to compare and test. Then it could reduce time substantially for simulation and optimization. In the same condition of case, simulation of self-establish program costs average time is optical software times approximately. To simulate 20 4:3 panel, for 8 lamps, both depth of module is 4 cm and 2.5 cm, the optimal uniformity is 90% and 89% respectively. To simulate both 32 and 37 16:9 panel, depth of module is 2.5 cm , number of lamps is 10 and 12, the optimal uniformity is 87% and 91% respectively. The result of optimization would reduce the cost of diffuser.
Besides uniformity, the efficiency of light is also the important property. We change structure of bottom reflector in the backlight module, to add triangular reflect object between lamps. They can decrease rays’ angle with normal, and collimate direction of rays. Then build up program include ray-tracing, distribution of illumination, and optimization to reduce time for simulation. We optimize both uniformity and efficiency of light, and using optical software to test and verify. The result of optimization would reduce the cost of BEF. To simulate both 20 4:3 and 32 16:9 panel, depth is 2.5 cm , both number of lamps is 8 and 10 with triangular reflect object and to add diffuser on module, the optimal distribution of light for half-intensity angle is 46 ,and uniformity is also over 85% . |
參考文獻 |
[1]. 光電工業協進會PIDA雜誌,2004/3
[2]. 陳鴻滄、方育斌,”LCD背光模組之產業趨勢、技術發展與設計方法”
[3]. 潘奕凱、姚柏宏、黃珩春,”高亮度背光模組與關鍵零組件技術趨勢”,機械工業雜誌 269期
[4]. 陳慶偉、劉正舜,”背光模組技術介紹”,電子與材料第一期,1999
[5]. 張明義,”背光模組產業概況” ,產業調查與技術 145期
[6]. 鮑友南、潘奕凱、姚柏宏、林建憲,”TV液晶顯示器之背光模組技術” ,機械工業雜誌 245期
[7]. 工業技術研究院,”大型LCD-TV用背光模組技術趨勢探索”
[8]. Adiel Abileah, Charles Sherman, M. Cammarata, "Lighting Assembly For A Backlit Electronic Display Including An Integral Image Splitting And Collimating Means", United States Patent 5161041, 1992
[9]. 潘義凱、姚柏宏、鮑友南、陳奇夆,”背光模組用之均勻度改善裝置”,中華民國專利第200504423號,2005
[10]. Thomas A. Mepham, Roger D. Eller, Gerald L. Vick, "Luminaire for use
in backlighting a liquid crystal display matrix", United States Patent
5253151, 1993
[11]. Itoh Atsushi, "Sheet-like light source device", United States Patent 6491411, 2002
[12].Yi -Chun Ho, "Direct-lighting type back light unit", United States Patent
6913378, 2005
[13]. Kjell J. Gasvik, "Optical Metrology", third edition, John Wiley & Sons, LTD., 2002
[14]. Guru,Hiziroglu, "Electromagnetic FIELD THEORY Fundamentals", PWS
Publishing Company, 1997
[15]. Mark A. Heald, Jerry B. Marion, "Classical Electromagnetic Radiation", Saunders College Publishing, 1995
[16]. Eugene Hecht, "OPTICS", fourth edition, Addison Wesley, 2002
[17]. 曹鴻、宋連科,”偏振光入射方位角與介質反射率關係研究”,曲阜師範大學學報第30卷第2期,2004/4
[18]. Warren J. Smith, "MODERN OPTICAL ENGINEERING", second edition,
McGraw-Hill, Inc., 1990
[19]. 方育斌,”LCD背光模組之光學最佳化設計”,國立成功大學工程科學系碩士論文,民國93年
[20]. Virendra N. Mahajan, "OPTICAL IMAGING AND ABERRATIONS-Part I. Ray Geometrical Optics", the International Society for Optical Engineering Bellingham, 1998.
[21]. Microsoft Visual C++ R 6.0 Enterprise Edition, Copyright Microsoft Corporation,1994-1998.
[22]. Geun Hyung Kim, Woo Jun Kim, Seung Mo Kim, Joon Gon Son, "Analysis of Thermo-Physical and Optical Properties of a Diffuser using PET/PC/PBT Copolymer in LCD Backlight Units", Elsevier SDOS ejournal, Displays, 2004 |