參考文獻 |
[1] R. Warrington, Louisiana Tech University, Institute for Micromanufacturing。
[2] Henry Guckel, Madison and Wis, “Formation of Microstructures by Multiple Level Deep X-ray Lithography with Sacrificial Metal Layers”, United States Patent 5190637, Mar. 2, 1993。
[3] R. Bruck, K. Hahn, J. Steinecker, “Technology Description Methods for LIGA processes”, J. Micromech. Microeng, Vol.5, 1995, pp.196-198。
[4] M. Abraham, J. Arnold, W. Ehrfeld, K. Hesch, H. Mobius, T. Paatzsch, C. Schulz, “Laser-LIGA: A Cost Saving Process for Flexible Production of Micro-structures”, SPIE, Vol. 2639, 1995, pp.164-173。
[5] Geoffey Prentice, “Electrochemical Engineering Principles”, 新月圖書代理, 1991。
[6] P. Rai-Choudhury editor, “HANDBOOK of Microlithography Micro-machining, and Micro-fabrication”, Volume 1 and 2, IEE Materials and Devices series12 and 12B, 1997。
[7] John D. Madden and Ian W. Hunter, “Three Dimensional Micro-fabrication by localized Electrochemical Deposition”, Journal of micro-electro-mechanical systems. Vol.5 No.1, Mar. 1996, pp24-32。
[8] Ian W. Hunter, Serge R. Lafontaine and John D. Madden, “Three-Dimensional Micro-fabrication by localized Electrchemical Deposition and Etching”, United States Patent 5641391, Jun.24, 1997。
[9] Lin, J. C., S. B. Jiang, et al., Micro-electroplating of Nickel on Copper Substrate , Hsin-Chu, Taiwan, (1998).
[10] Lin, J. C. , T. K. Chang, et al., Fabrication of Copper Columns by MAGE Process , Nantou, Taiwan, (2004).
[11] Lin, J. C., R. W. You, et al., Potential Monitoring at Open Circuit and Cathode Polarization by MAGE System with Nickel , Kaohsiung, Taiwan, (2004).
[12] Lin, J. C., S. B. Jiang, et al., The Effect of Electric Field on Fabricating Columns by MicroanodeGuided Electroplating (MAGE) process , Automation 2005, Taichung, Taiwan, (2005).
[13] Lin, J. C., S. B. Jiang, et al., Effect of Electric Field on the Cross Section of Micrometer Nickel Columns Fabricated by MAGE Process , Automation 2005, Taichung, Taiwan, (2005).
[14] Lee, D. L., S. B. Jiang, et al., Micro-electroplating Control System , Automation 2000, Taipei, Taiwan, (2000).
[15] Lin, J. C., S. B. Jang, et al., Fabrication of micrometer Ni columns by continuous and intermittent micro anode guided electroplating , J. Micromech. Microeng. 15 (2005) 2405–2413
[16] Lee, D. L., Lin, J. C. et al., Micro-anode Guided Electroplating (MAGE) Control System , Materials Science Forum Vols. 505-507, (2006)
[17] 李棟樑, “數位訊號處理微電腦介面板之實作與應用”, 國立中央大學機械工程研究所碩士論文,1995。
[18] 李勝富, “微電鍍控制系統之開發”, 國立中央大學機械工程研究所碩士論文, 2002。
[19] 廖信凱, “電極引導微電鍍系統之開發”, 國立中央大學機械工程研究所碩士論文, 2003。
[20] 黃聖原, “多極式電極引導微電鍍系統之開發”, 國立中央大學機械工程研究所碩士論文, 2004。
[21] 鄧振宏, “3D陽極引導微電鍍系統開發”, 國立中央大學機械工程研究所碩士論文, 2005。
[22] 川崎原雄等六人編著, 呂政峰編譯,“電鍍學”, 世一書局, 1993。
[23] Lubomry T. Romankiw “Electrodeposition technology theory and practice” IBM T. J. Watson Research Centrt Yorktown Heights, New York, 1986, pp.425-565
[24] 陳承志,“銅基材上之單軸微電析鎳製程研究”, 國立中央大學機械研究所碩士論文, 1999。
[25] 田福助編著, “電化學理論與應用”, 五洲出版社, 1997。
[26] 張庭綱, “微陽極引導微電鍍法製作微銅柱及銅柵欄之研究”, 國立中央大學碩士論文, 2004。 |