參考文獻 |
[1] S. Kodama, T. Yoshimatsu, and H. Ito, “320Gbit/s optical gate monolithically integrating photodiode and electroabsorption modulator,” Electronics Letters, vol. 39, pp.383-385, Feb., 2003.
[2] H.-F. Chou, Y.-J. Chiu, A. Keating, J. E. Bowers, and D. J. Blumenthal,“Photocurrent-assisted wavelength (PAW) conversion with electrical monitoring capability using a traveling-wave electroabsorption modulator,” IEEE Photon. Technol. Lett., vol. 16, pp.530-532, Feb., 2004.
[3] Joseph C. Palais, “Fiber optic communications”, fourth edition,2001.
[4] Y. Matsui, H. Murai, S. Arahira, S. Kutsuzawa, and Y. Ogawa, “30-GHz bandwidth 1.55-μm strain-compensated InGaAlAs-InGaAsP MQW laser,”IEEE Photonics Technol. Lett., vol. 9, pp. 25-27, 1997.
[5] C. H. Henry, “Theory of the linewidth of semiconductor lasers,” IEEE J. Quantum Electron., vol. QE-18, 9, pp. 259-264, 1982.
[6] T. L. Koch and J. Bowers, “Nature of wavelength chirping in directly modulated semiconductor lasers,” IEEE Electron Lett., vol. 20, pp. 1038-1040, 1984.
[7] T. L. Koch and R. A. Linke, “Effect of nonlinear gain reduction on semiconductor laser wavelength chirping,” Appl. Phys. Lett., vol. 48, pp. 613-615, 1986.
[8] M. Osinski and J. Buus, “Linewidth broadening factor in semiconductor lasers-an overview,” IEEE J. Quantum Electron., vol. QE-23, pp. 9-29, 1987.
[9] F. Koyama and K. Iga, “Frequency chirping in external modulators,” J. Lightwave technol., vol. 6, pp. 87-93, 1988.
[10] D. C. Hutchings, M. Sheik-Bahae, D. J. Hagan, and E. W. van Stryland, “Kramers-Kronig relations in nonlinear optics,” Opt. Quantum Electron., vol. 24, pp. 1-30, 1992.
[11] F. Dorgeuille and F. Devaux, “On the transmission performances and the chirp parameter of a multiple-quantum-well electroabsorption modulator,” IEEE J. Quantum Electron., vol. 30, pp. 2565-2572, 1994.
[12] L. A. Coldren and S. W. Corzine, Diode Lasers and Photonic Integrated Circuits. New York: John Wiley & Sons, Inc., p. 209, 1995.
[13] K. Wakita, K. Yoshino, I. Kotaka, S. Kondo, and Y. Noguchi, “High speed, high efficiency modulator module with polarization insensitivity and very low chirp,” IEEE Electron Lett., vol. 31, pp. 2041-2042, 1995.
[14] K. Yamada, K. Nakamura, Y. Matsui, T. Kunii, and Y. Ogawa, “Negative-chirp electroabsorption modulator using low-wavelength detuning,” IEEE Photonics Technol. Lett., vol. 7, pp. 1157-1158, 1995.
[15] Shengzhong Zhang, “Traveling-wave electroabsorption modulators,” University of California, Santa Barbara, Ph. D. Dissertation, 1999.
[16] J. G. Mendoza-Alvarez, L. A. Coldren, A. Alping, R. H. Yan, T. Hausken, K. Lee, and K. Pedrotti, “Analysis of depletion edge translation lightwave modulators,” J. Lightwave technol., vol. 6, pp. 793-808, 1988.
[17] R. G. Walker, “High-speed III-V semiconductor intensity modulators,” IEEE J. Quantum Electron., vol. 27, pp. 654-667, 1991.
[18] O. Mitomi, K. Noguchi, and H. Miyazawa, “Broadband and low driving-voltage LiNbo3 optical modulators,” IEE Proc., Optoelectron., vol. 145, pp. 360-364, 1998.
[19] D. Chen, D. Bhattacharya, A. Udupa, B. Tsap, H.R. Fetterman, C. Antao, L. Sang-Shin, C. Jinghong, W. H. Steier, and L. R. Dalton, “High-frequency polymer modulators with integrated finline transitions and low Vpi ,” IEEE Photonics Technol. Lett., vol. 11, pp. 54-56, 1999.
[20] C. Rolland, “InGaAsP-based Mach-Zehnder modulators for high- speed transmission system,” OSA OFC’98, San Jose, CA, pp. 283-284, 1998.
[21] H. R. Khazaei, E. Berolo, and F. Ghannouchi, “High-speed slow-wave coplanar strip GaAs/AlGaAs electro-optic laser modulator,” Microw. Opt. Technol. Lett., vol. 19, pp. 184-186, 1998.
[22] K. Wakita, I. Kotaka, and H. Asai, “High-speed InGaAlAs/InAlAs multiple quantum well electrooptic phase modulators with bandwidth in excess of 20 GHz,” IEEE Photonics Technol. Lett., vol. 4, pp. 29-31, 1992.
[23] T. Ido, S. Tanaka, M. Suzuki, M. Koizumi, H. Sano, and H. Inoue, “Ultra-High-speed multiple-quantum-well electro-absorption optical modulators with integrate waveguides,” J. Lightwave Technol., vol. 14, pp. 2026-2034, 1996.
[24] F. Devaux, J. C. Harmand, I. F. L. Dias, T. Guettler, O. Krebs, and P. Voisin, “High power saturation, polarization insensitive electroabsorption modulator with spiked shallow wells,” Electron. Lett., vol. 33, pp. 161-163, 1997.
[25] K. Kawano, M. Kohtoku, M. Ueki, T. Ito, S. Kondoh, Y. Noguchi, and Y. Hasumi, “Polarization- insensitive traveling-wave electrode electroabsorption(TW-EA) modulator with bandwidth,” J. Lightwave Technol., vol. 14, pp. 2026-2034, 1996.
[26] S. Z. Zhang, Yi-Jen Chiu, P. Abrabam, and John E. Bowers, “25 GHz polarization-insensitive electroabsorption modulators with traveling-wave electrodes ,” IEEE Photon. Technol. Lett., vol. 11, pp. 191-193, 1999.
[27] F. Devaux, S. Chelles, A. Ougazzaden, A. Mircea, and J. C. Harmand, “Electroabsorption modulators for high-bit-rate optical communications: a comparison of strained InGaAs/InAlAs and InGaAsP/ InGaAsP MQW,” Semicond. Sci. Technol., vol. 10, pp. 887-901, 1995.
[28] H. Fukano, T. Yamanaka, M. Tamura, Y. Konodo, and T. Saitoh, “Very lowdriving-voltage InGaAlAs/InAlAs electroabsorption modulators operating at 40 Gbit/s,” Electronic Letters, vol. 41, Feb., 2005.
[29] M. Tamura, T. Yamanaka, H. Fukano, Y. Akage, Y. Konodo, and T. Saitoh,“High-speed electroabsorption modulators buried with ruthenium-doped SI-InP,” IEEE Photon. Technol. Lett., vol. 16, pp.2613-2615, Dec., 2004.
[30] Hideki Fukano, Takayuki Yamanaka, Munehisa Tamura, and Yasuhiro Kondo,“Very-low-driving-voltage electroabsorption modulators operating at 40 Gb/s,” J. Lightwave Technol.,vol. 24, pp.2219-2224, May, 2006.
[31] Pallab Bhattacharya, “Semiconductor Optoelectronic Devices,” 2nd., Prentice Hall, pp.79-82, 1997
[32] J.-W. Shi, C.-A. Hsieh, A.-C. Shiao, Y.-S. Wu, F.-H. Huang, S.-H. Chen, Y.-T. Tsai, and J.-I. Chyi, “demonstration of a dual-depletion-region electroabsorption modulator at 1.55-μm wavelength for high-speed and low-driving-voltage performance, ”IEEE Photon. Technol. Lett., Vol. 17, 2068-2070, Oct 2005
[33] H. Nie, K. A. Anselm, C. Lenox, P. Yuan, C. Hu, G. Kinsey, B. G. Streetman, and J. C. Campbell, “Resonant-cavity separate absorption, charge and multiplication avalanche photodiodes with high-speed and high gain-bandwidth product,” IEEE Photon. Technol. Lett., vol. 10, pp. 409-411, Mar., 1998.
[34] T. Nakata, T. Takeuchi, I. Watanabe, K. Makita, and T. Torikai, “10Gbit/s high sensitivity, low-voltage-operation avalanche photodiodes with thin InAlAs multiplication layer and waveguide structure,” Electron. Lett., vol. 36, pp.2033-2034, Nov., 2000.
[35] M. Tamura, T. Yamanaka, H. Fukano, Y. Akage, Y. Konodo, and T. Saitoh,“High-speed electroabsorption modulators buried with ruthenium-doped SI-InP,” IEEE Photon. Technol. Lett., vol. 16, pp.2613-2615, Dec., 2004.
[36] Larry A. Coldren, Scott W. Corzine,” Diode lasers and photonic integrated circuits,” Wiley Interscience,pp533-535, 1995.
[37]Jasprit Singh, “Electronic and optoelectronic properties of semiconductor structures”, Cambridge University Press,2003
[38] T. Hatta, T. Miyahara, M. Ishizaki, N. Okada, S. Zaizen, K. Motoshima, and K. Kasahara, “Inductance-controlled electroabsorption modulator modules using the flip-chip bonding technique,” IEEE/OSA J. of Lightwave Technol., vol. 23, pp.582-587, Feb., 2005.
[39] T. Y. Chang, “Design optimization of low-impedance high-speed optical modulators for digital performance,” J. of Lightwave Technol.,vol. 23,pp4321 - 4331,Dec.,2005 |