參考文獻 |
[1] C. Bonten and C. Tuchert, "Welding of plastics - Introduction into heating by radiation," Journal of Reinforced Plastics and Composites, vol. 21, no. 8, pp. 699-709, 2002.
[2] 葛紹岩,那鴻悅,「熱輻射性質及其量測」,科學出版社,1989.
[3] L. A. Klein, Millimeter-wave and Infrared Multisensor Design and Signal Processing Artech House Boston, 1997.
[4] S. R. Borrello and H. Levinstein, "Preparation and Properties of Mercury-Doped Germanium," Journal of Applied Physics, vol. 33, p. 2947, 2004.
[5] W. S. BOYLE and G. E. SMITH, "CHARGE COUPLED SEMICONDUCTOR DEVICES," vol. 49, no. 4, pp. 587-593, 1970.
[6] W. D. Lawson, S. Nielson, E. H. Putley, and A. S. Young, "Preparation and properties of HgTe and mixed crystals of HgTe-CdTe," J. Phys. Chem. Solids, vol. 9, no. 3-4, pp. 325-329, 1959.
[7] D. Long and J. L. Schmit, "Mercury-Cadmium Telluride and Closely Related Alloys," Semiconductors and Semimetals, 1970.
[8] W. J. Parrish, F. J. Renda, N. L. Ray, D. G. Maeding, R. E. Eck, and J. R. Toman, "Characterization of a 32× 32 InSb hybrid IR focal plane," 1978 International Electron Devices Meeting, vol. 24 1978.
[9] K. C. Liddiard, "THIN-FILM RESISTANCE BOLOMETER IR DETECTORS," Infrared Physics, vol. 24, no. 1, pp. 57-64, 1984.
[10] J. S. Shie, Y. M. Chen, M. Ou-Yang, and B. C. S. Chou, "Characterization and modeling of metal-film microbolometer," Journal of Microelectromechanical Systems, vol. 5, no. 4, pp. 298-306, 1996.
[11] M. F. TOMPSETT, "Pyroelectric thermal imaging camera tube," vol. ED-18, no. 11, pp. 1070-1074, 1971.
[12] R. W. WHATMORE, "Pyroelectric devices and materials," Reports on Progress in Physics, vol. 49, pp. 1335-1386, 1986.
[13] K. Yamashita, A. Murata, and M. Okuyama, "Miniaturized infrared sensor using silicon diaphragm based on Golay cell," Sensors and Actuators, A: Physical, vol. 66, no. 1-3, pp. 29-32, 1998.
[14] X. He, G. Karunasiri, T. Mei, W. J. Zeng, P. Neuzil, and U. Sridhar, "Performance of microbolometer focal plane arrays under varying pressure," IEEE Electron Device Letters, vol. 21, no. 5, pp. 233-235, 2000.
[15] C. Changhong, Y. Xinjian, and Z. Xingrong, "Design and fabrication of linear array IR bolometers using VO2 thin film," Infrared and Millimeter waves, Comference Digest, 2000.
[16] S. Sedky, P. Fiorini, K. Baert, L. Hermans, and R. Mertens, "Characterization and optimization of infrared poly SiGe bolometers," IEEE Transactions on Electron Devices, vol. 46, no. 4, pp. 675-682, 1999.
[17] E. Socher, Y.Sinai, O. Degani, Y. Nemirovsky, "Modeling, Design and characterization of surface micromachined polysilicon microbolometers," The 22nd Convention of Electronics Engineers in Israel, pp. 56-57, 2002.
[18] E. Socher, Y. Sinai, and Y. Nemirovsky, "A low-cost CMOS compatible serpentine-structured polysilicon-based microbolometer array," TRANSDUCERS, Solid-State Sensors, Actuators and Microsystems, 12th International Conference on, 2003, vol. 1 2003.
[19] H. K. Lee, J. B. Yoon, E. Yoon, S. B. Ju, Y. J. Yong, W. Lee, and S. G. Kim, "High fill-factor infrared bolometer using micromachined multilevel electrothermal structures," IEEE Transactions on Electron Devices, vol. 46, no. 7, pp. 1489-1491, 1999.
[20] A. Tanaka, S. Matsumoto, N. Tsukamoto, S. Itoh, K. Chiba, T. Endoh, A. Nakazato, K. Okuyama, Y. Kumazawa, M. Hijikawa, H. Gotoh, T. Tanaka, and N. Teranishi, "Infrared focal plane array incorporating silicon IC process compatible bolometer," IEEE Transactions on Electron Devices, vol. 43, no. 11, pp. 1844-1850, 1996.
[21] T. O. C. View, "Characterisation of CMOS compatible uncooled microbolometers," Optical MEMS, 2000 IEEE/LEOS International Conference on, pp. 99-100, 2000.
[22] D. S. Tezcan, S. Eminoglu, O. S. Akar, and T. Akin, "A low cost uncooled infrared microbolometer focal plane array using the CMOS n-well layer," in Proceedings of the IEEE Micro Electro Mechanical Systems (MEMS) Interlaken: Institute of Electrical and Electronics Engineers Inc., 2001, pp. 566-569.
[23] D. S. Tezcan, S. Eminoglu, and T. Akin, "A low-cost uncooled infrared microbolometer detector in standard CMOS technology," IEEE Transactions on Electron Devices, vol. 50, no. 2, pp. 494-502, 2003.
[24] S. Eminoglu, D. S. Tezcan, M. Y. Tanrikulu, and T. Akin, "Low-cost uncooled infrared detectors in CMOS process," Sensors and Actuators A, vol. 109, pp. 102-113, 2003.
[25] 歐陽盟,輻射溫度計之分析與設計,國立交通大學光電所博士論文,民國87年。
[26] T. H. Yu, C. Y. Wu, Y. C. Chin, P. Y. Chen, F. W. Chi, J. J. Luo, C. D. Chiang, and Y. T. Cherng, "New CMOS readout circuit for uncooled bolometric infrared focal plane arrays," in Proceedings - IEEE International Symposium on Circuits and Systems, 2 ed Geneva, Switz: Institute of Electrical and Electronics Engineers Inc., Piscataway, NJ, USA, 2000, p. 493.
[27] Masrangelo,Carlos Horacio, "Thermal Application of Microbridges," University of California,Berkeley, Ph.D. thesis, 1991.
[28] X. Qian, Y. P. Xu, and G. Karunasiri, "A Tunable Bias-heating Cancellation Circuit for Microbolometer Readout Electronics,".
[29] T. O. C. View, "A prototype ROIC with bias-heating cancellation for microbolometer IR FPA," Infrared and Millimeter Waves, 2002. Conference Digest. Twenty Seventh International Conference on, pp. 259-260, 2002.
[30] Y. P. Xu, X. B. Qian, and G. Karunasiri, "Circuit for microbolometer bias-heating cancellation," Electronics Letters, vol. 36, no. 24, pp. 1993-1994, 2000.
[31] S. Kavadias, P. De Moor, and C. Van Hoof, "CMOS circuit for readout of microbolometer arrays," Electronics Letters, vol. 37, no. 8, pp. 481-482, 2001.
[32] AD620 Low Cost, Low Power Instrumentation Amplifier, ANALOG DEVICES, 1999. |