共振頻率法於牙根植體缺損位置判別研究

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：43

、訪客IP：18.221.90.184

姓名

陳梓尉(Zih-Wei Chen) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

共振頻率法於牙根植體缺損位置判別研究
(THE BONY DEFECTED LOCATION on DENTAL IMPLANTS by THE FREQUENCY RESPONSE METHOD)

相關論文

★ 應用於車身號碼打刻機之號碼辨識	★ 複合式掌紋識別系統
★ 圓形偵測在OLED Panel 檢測上的應用	★ TFT-LCD前框卡勾設計之衝擊模擬分析與驗證研究
★ TFT-LCD 導光板衝擊模擬分析及驗證研究	★ MLCC薄膜厚度即時線上影像檢測技術之研發
★ 數位機上盒掉落模擬分析及驗證研究	★ 全自動微鑽針影像檢測系統之研究
★ 應用類神經網路預測COG製程對於中小尺寸TFT-LCD產生之應力狀態	★ 應用機器視覺系統檢測高滲透壓刀輪切割 TFT-LCD 玻璃後斷面之研究
★ 低成本輕量化機械手臂之研究	★ 應用在同軸電纜加工之雷射光斑導引機構設計與分析
★ 旋轉機械狀態監測-以傳動系統測試平台為例	★ 發射室空腔模態分析在噪音控制之應用暨結構聲輻射效能探討
★ 時頻分析於機械動態訊號之應用	★ VKF階次追蹤之探討與應用

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

植牙術後的骨整合程度，關係到手術是否成功。本文以加速規貼在牙科植體表面上作為感測器，配合衝擊鎚激振作為驅動器進行懸臂樑之實驗模態測試；並搭配有限元素法做模態分析，觀察結構共振頻率與骨缺損之關係，以建立一套檢測機制。首先，由理論分析獲得植體尺寸與共振頻率關係，再由實驗驗證骨缺損模型為近似懸臂樑結構；搭配有限元素做數值模態分析，得其共振頻率與振型。另在實驗方面，藉衝擊鎚做不同模型之間的敲擊，可從加速規獲得結構共振頻率，和有限元素分析結果比較其差異，並將不同缺損狀態結構共振頻率值做分析整理，可建立一套檢測機制。共有五個步驟，包括方位判別、完全缺損判斷、垂直剖面下之缺損位置與缺損量判斷、整體缺損量判斷、綜合研判等。研究中，並將此檢測方法應用於第三類模型上進行測試，以驗證檢測技術之有效性。

摘要(英)

This study is based on the resonant frequency response to specify criteria for examining the defect severity in the bone of dental implant. Both the finite element analysis and the experimental modal analysis are applied to compare the differences between experiment and simulation.
By reviewing relevant literatures, it is known that the design model is similar to the cantilever beam structure. Furthermore, the study applied the given formula to generalize a relation between resonant frequency response and model size. In this article, three modals were designed to test and verify whether the resonant frequency response is related to model defected depth. Then, we collated those data and defined a criterion to detect the defect bone depth with dental implant. The five detection steps include to defect the horizontal positions, to detect the entire defect, to detect the defect depth and quantity in vertical section, to detect the whole defect, and to analyze etc. In the end, we applied the method in the third model to verify its effectiveness.

關鍵字(中)

★ 有限元素法
★ 骨缺損
★ 共振頻率法
★ 實驗模態測試
★ 牙科植體

關鍵字(英)

★ Finite Element Analysis
★ Experimental Modal Analysis
★ Resonant Frequency Response Method
★ Bone defect
★ Dental Implant

論文目次

摘要.......................................................................................................................................I
Abstract.................................................................................................................................II
誌謝.......................................................................................................................................III
目錄.......................................................................................................................................IV
圖目錄...................................................................................................................................VI
表目錄...................................................................................................................................IX
第一章緒論..........................................................................................................................1
1.1 研究動機.....................................................................................................................1
1.2文獻回顧......................................................................................................................2
1.3 研究範疇.....................................................................................................................6
第二章結構模態理論基礎..................................................................................................7
2.1 自由振動分析.............................................................................................................7
2.2懸臂樑振動分析..........................................................................................................10
2.3數值模態分析..............................................................................................................13
第三章骨缺損模型之模態分析與實驗模態測試..............................................................15
3.1骨缺損模型之設計製作..............................................................................................16
3.2實驗模態測試..............................................................................................................19
3.2.1 模態測試設備....................................................................................................19
3.2.2 模態測試方法....................................................................................................20
3.3數值模態分析..............................................................................................................22
3.3.1收斂性分析.........................................................................................................24
3.4懸臂樑模型之驗證......................................................................................................26
第四章植體骨缺損定量檢測與位置判別探討..................................................................29
4.1骨缺損量判別..............................................................................................................29
4.1.1 第一類骨缺損模型之實驗與模擬....................................................................29
4.1.2 第二類骨缺損模型之實驗與模擬....................................................................37
4.2骨缺損位置檢測..........................................................................................................45
4.3骨缺損檢測機制建立..................................................................................................49
4.4骨缺損檢測機制驗證..................................................................................................52
4.4.1 尺寸與頻率之驗證............................................................................................52
4.4.2 五倍放大模型檢測機制之驗證........................................................................56
第五章結論與未來展望......................................................................................................64
附錄A：第一類模型之模擬分析振型圖............................................................................67
附錄B：第二類模型之模擬分析振型圖............................................................................75
附錄C：第一、二類模型缺損位置頻率響應圖................................................................81
參考文獻................................................................................................................................85

參考文獻

Adell, R., Lekholm, U. and Rockler, B. and Branemark, P. I., “ A 15 Years Study of Osseo-integrated Implants in the Treatment of the Edentulous Jaw,” International Journal of Oral and Maxillofacial Surgery, Vol. 10, No. 6, pp. 137-416 (1981).
Albrektsson, T (1985), Tissue-Integrated Prostheses: Osseo- integration in Clinical Denisity, Quintessence Publishing, Chicago (IL).
Albrektsson, T. and Albrektsson, B., “Osseo-intehration of Bone Implants: a Review of an Alterative Mode of Fixation,” Acta Orthopaedica Scandinavica, Vol. 58, pp. 567-577 (1987).
Branemark, P.I, Brerine, U.and Adell, R., “Intraosseous Anchorage of Dental Prosthess: I Experimental Studies,” Scand J Plast Reconstar Surg, pp-81-100 (1963).
Brunski, J. B. (1998), The Influence of Force, Motion and Related Quantities on the Response of Bone to Implants, Raven Press Ltd., New York.
Bossy, E., Talmant, M. and Laugier, P., “ Three-Dimensional Simulation of Ultrasonic Axial Transmission Velocity Measurement on Cortical Bone Models,” Acoustical Society of America, Vol.115, No. 5, pp.2314-2324 (2004).
Çiftçi, Y. and Cancy, Ş., “The Effect of Veneering Materials on Stress Distribution in Implant-Supported Fixed Prosthetic Restorations,” International Journal of Oral and Maxillofacial Implants, Vol. 15, No.4, pp. 571-582 (2000).
Christoph, J., “ The Laterally Varying Ultrasonic Velocity in the Dentin of Human Teeth,” Journal of Biomechanics, Vol. 39, No. 8, pp.2388-2396 (2005).
Doebling, S., Farrer, C., Prime, M. and Shevitz, D.(1999). Damage Identification and Health Monitoring of Structural and Mechanical System form Changes in Their Vibration Characteristics: A Literature Review, Los Alamos National Laboratory, California.
Heller, J. G., Bradley, T., Estes, M. S. and Diop, A., “Biomechanical Study of Screw in the Lateral Masses: Variables Affecting Pull-out Resistance,” Journal of Bone and Joint Surgery, Vol. 78, No, 9, pp. 1315-1321 (1996).
Huang, H. M., Pan, L. C., Lee, S. Y., Chiu, C. L., Fan, K. H. and Ho, K. N.,“Assessing the Implant-Bone Interface by Using Natural Frequency Analysis,” Clinical Oral Implants Research, Vol. 90, No. 3, pp. 285-291 (2000).
Jaecques, S., Pastrav, C., Zahariuc, A. and Van der Perre, G., “ Analysis of the Fixation Quality of Cementless Hip Prostheses Using a Vibrational Technique,” Proceedings of ISMA, pp.443-456 (2004).
Jemt, T., Chai, J., Harnett, J., Heath, MR., Hutton, JE. and Johns, RB., et al. “A 5-yearprospective multicoated follow-up report on over dentures supported by osseointegrated implants,” International Journal of Oral Maxillofac Implants , pp291-298 (1996).
Johansson, C. B. and Albreksson, T., “Integration of Screw Implants in the Rabbit: a One-Year Follow-up of Removal Torque of Titanium Implants,” International Journal of Oral and Maxillofacial Implants, Vol. 2, No. 2, pp. 69-76 (1987).
Kaneko, T., “Pulsed Oscillation Technique for Assessing the Mechanical State of the Dental Implant-Bone Interface,” Journal of Biomaterials, Vol. 12, No. 6, pp. 555-560 (1991).
Meredith, N., Alleyne, D. and Cawley, P., “ Quantitative Determination of the Stability of the Implant-Tissue Interface Using Resonance Frequency Analysis,” Clinical Oral Implants Research, Vol.7, No. 3, pp. 261-267 (1996).
Muhlemann, H. R., “ Periodontometry, a Method for Measuring Tooth Mobility,” Oral Surgery, Oral Medicine, Oral Pathology, Vol. 4, No. 10, 1220-1233 (1951).
Kim, J. and Stubbs, N., “ Crack Detection in Beam-Type Structures Using Frequency Data,” Journal of Sound and Vibration, Vol. 259, No.1, pp.145-160 (2003).
Kitamura, E., Stegaroiu, R., Nomura, S. and Miyakawa, O., “Biomechanical Aspects of Marginal Bone Resorption Around Osseo-integrated Implants: Considerations Based on A Three-Dimensional Finite Element Analysis,” Clin. Oral Impl., Vol. 15, No, 3, pp.401-412 (2003).
Kitamura, E., Stegaroiu, R., Nomura, S. and Miyakawa, O., “Influence of Marginal Bone Resorption on Stress around an Implant: a 3-Dimensional Finite Element Analysis, ” Journal of Oral Rehabilitation, Vo1. 32, No, 1, pp.279-286 (2005).
Lee, S. Y., Huang, H. M., Lin, C. Y. and Shih, Y. H., “In vivo and in vitro Natural Frequency Analysis of Periodontal Conditions, an Innovative Method,” Journal ofPeriodontal Research, Vol. 71, No. 4, pp. 632-640 (1999).
Meredith, N. and Sennerby, L., “Resonance Frequency Analysis: Measuring Implant Stability and Osseo-integration,” Compendium of Continuing Education Dentistry, Vol. 19, No. 5, pp. 493-502 (1998).
Oka, H., Yamamoto, T. and Saratani, K., “ Automatic Diagnosis of Tooth Mobility for Clinical Use,” Medical Progress through Technology, Vol. 16, No. 3, pp. 117-124 (1990).
Pattijn, V., Jaecques, S. V. N., De Smet, E., Muraru, L., Van Lierde, C., Van der Perre, G., Naert, I. and Vander Sloten, J., “Resonance Frequency Analysis of Implants in the Guinea Pig Model: Influence of Boundary Conditions and Orientation of the Transducer,” Medical Engineering & Physics, Vol. 28, No. 9, pp. 1119-1127 (2006).
Piattelli, A., Corigliano, M., Scarano, A., Costigliola, G. and Paolantonio, M., “Immediate Loading of Titanium Plasma-Sprayed Implants: A Histological Aalysis I Monkeys, ”Journal of Period Ontology, Vo1. 69, No.6, pp.321-327 (1998).
Protopappas, V., Baga, D., Fotiadis, D.,Likas, A., Papachristos, A. and Malizos, K., “An Ultrasound Wearable System for the Monitoring and Acceleration of Fracture Healing in Long Bones,” IEEE Transaction on Biomedical Engineering, Vol. 52, No. 9, pp.1597-1608 (2005).
Qi, G., Mouchon, W., Tan, T., “How Much Can a Vibrational Diagnostic Tool Reveal in Total Hip Arthroplasty Loosening, ” Journal of Clinical Biomechanics, Vol. 18, No. 5, pp.444-458 (2003).
Singh, R(2005), The Design Fabrication and Characterization of an Ultrasonic Crack Detection System for Human Teeth, PhD Thesis, University of California Los Angles, California.
Sunden, S., Grondahl, K. and Grondahl, H. G., “Accuracy and Precision in the Radiographic Diagnosis of Clinical Instability in Brånemark Dental Implants,” Clinical Oral Implants Research, Vol. 6, No. 4, pp. 220-226 (1995).
Tada, S., Stegaroiu, R., Kitamura, E., Miyakawa, O. and Kusakari, H., “Influence of Implant Design and Bone Quality on Stress/Strain Distribution in Bone AroundImplant：A 3-dimensional Finite Element Analysis,” Journal of Oral & Maxillofacial Implant, Vol. 18, No. 3, pp. 357-368 (2003).
Thomson, W. T. (1995), Theory of Vibration with Applications, Prentice-Hall, New York.
William, D. and Callister, J. R. (2003), Materials Science and Engineering an Introduction, 4th ed., Willy, New York.
王栢村(2002)：振動學。全華科技圖書股份有限公司，臺北。
王栢村(2005)：電腦輔助工程分析之實務與應用。全華科技圖書股份有限公司，臺北。
王大介，「利用共振頻率分析法研究植體在類似不同骨密度環境下之穩固度」，碩士論文，國防醫學院牙醫科學研究所，臺北(2004)。
李友順，「開發臨床骨密度儀之研究」，碩士論文，國立成功大學醫學工程研究所，臺南(2005)。
林世芬，「以激振方式分析人工牙根穩固度之相關性研究」，碩士論文，臺北醫學大學口腔復健醫學研究所，臺北(2002)。
林奕男，「懸臂樑結構尺寸與自然頻率及阻尼比關係之研究」，碩士論文，國立中興大學機械工程研究所，臺中(2004)。
陳璟鋒，「利用共振頻率初始值預測牙科植體之癒合時間及可能穩定值：以動物實驗及離體實驗」，碩士論文，臺北醫學大學口腔復健醫學研究所，臺北(2003)。
陳精一(2005)：ANSYS振動學實務分析。高立圖書有限公司，臺北。
莊瀚伯，「牙科植體術後股缺損型態之結構分析」，碩士論文，國立中央大學機械工程研究所，中壢(2006)。
鄭光佑，「人工牙根穩固度檢測儀之設計與驗證」，碩士論文，臺北醫學大學口腔復健醫學研究所，臺北(2002)。

指導教授

黃衍任、潘敏俊
(Yean-Ren Hwang、Min-Chun Pan)

審核日期

2007-7-23

推文