參考文獻 |
[1] 黃清賢,危害分析與風險評估,三民書局,台北市,2000。
[2] Guidelines on Occupational Safety and Health Management Systems, ILO-OSH 2001, International Labour Organization, Geneva, 2001.
[3] Occupational Health and Safety Management Systems-Requirements, OHSAS 18001:2007, British Standards Institution, London, 2007.
[4] Occupational Health and Safety Management System-Guide, BS 8800: 2004, British Standards Institution, London, 2004.
[5] 行政院勞工委員會,“臺灣職業安全衛生管理系統指導綱領”,2008。
http://www.cla.gov.tw
[6] AS-NZS 4360: 2004 Risk management, Standards Australia International Ltd, Sydney, Standards New Zealand, Wellington, 2004.
[7] Northwest Controlling Corporation Ltd, “The Role of Risk Management For Occupational Health and Safety”
http://www.noweco.com
[8] Risk Analysis Framework, Department of Health and Ageing Office of the Gene Technology Regulator, Australian, January 2005.
[9] Overseas Chapter of the Institution of Engineers Bangladesh (Singapore), “An Introduction to Risk Management and Risk Assessment”
http://ieb-singapore.org
[10] Tixier J, Dusserre G, Salvi O, Gaston D, “Review of 62 Risk Analysis Methodologies of Industrial Plants”, Journal of Loss Prevention in the Process Industries, Vol. 15, Page 291-303, 2002.
[11] Guidelines for Hazard Evaluation Procedures, 2nd ed with Worked Examples, Center for Chemical Process Safety of the American Institute of Chemical Engineers, New York, 1992.
[12] Greenberg HR, Cramer JJ, Risk Assessment and Risk Management for The Chemical Process Industry, Van Nostrand Reinhold , New York, 1991.
[13] Hyatt N, Guide for Process Hazards Analysis, Hazards Identification & Risk Analysis, 1st ed, Dyadem Press, Ontario, March 2003.
[14] Khan FI, Abbasi SA, “Techniques and Methodologies for Risk Analysis in Chemical Process Industries”, Journal of Loss Prevention in the Process Industries, Vol. 11, Page 261-277, 1998.
[15] The Institution of Engineering and Technology, “Quantified Risk Assessment Techniques - Part 3”
http://www.theiet.org
[16] Guidelines for Chemical Process Quantitative Risk Analysis, Center for Chemical Process Safety of the American Institute of Chemical Engineers, New York, 1989.
[17] The Institution of Engineering and Technology, “Quantified Risk Assessment Techniques-Part 2”
http://www.theiet.org
[18] ioMosaic Corporation, “Designing an Effective Risk Matrix”
http://www.iomosaic.com
[19] Reducing Risks, Protecting people: HSE's Decision Making Process, Health and Safety Executive, Sudbury, 2001.
[20] Swuste P, Qualitative Methods for Occupational Risk Prevention Strategies in Safety, or Control Banding-Safety, Safety Science Monitor, Vol. 11, Issue 3, 2007.
[21] Cockshott JE, Probability Bow-Ties: A Transparent Risk Management Tool, Process Safety and Environmental Protection, Vol. 83(B4), Page 307-316, July 2005.
[22] U.S. Department of Homeland Security, “Risk-based Decision-making Guidelines-Chapter 10-Event Tree Analysis”
http://www.uscg.mil
[23] Safety Users Group, “Layer of Protection Analysis-An Effective Tool in PHA”
http://www.safetyusersgroup.com
[24] Health and Safety Executive, “Lines of Defence/Layers of Protection Analysis in the COMAH Context”
http://www.hse.gov.uk
[25] Asian Nuclear Safety Network , “Initiating Event Analysis” http://www-ansn.iaea.org
[26] Management of Health and Environmental Hazards, “Quantitative Risk Assessment”
http://manhaz.cyf.gov.pl
[27] Norwegian University of Science and Technology, “Chapter 3 - System Analysis - Event Tree Analysis”
http://www.ntnu.no
[28] Functional Safety-Safety Instrumented Systems for The Process Industry Sector-Part 3: Guidance for The Determination of The Required Safety Integrity Levels, BS EN 61511-3:2004, British Standards Institution, London, April 2003.
[29] Institute for Risk management and Safety analysis, “Safety Barriers and Safety Functions-A Comparison of Different Applications”
http://www.irisk.se/english/irshome.htm
[30] Hendershot DC., “Safety Through Design in the Chemical Process Industry : Inherently Safer Process Design”, Rohm and Haas Company, 1997.
http://home.att.net/~d.c.hendershot/papers/pdfs/nsc897.pdf
[31] Marszal EM, Weil CP, Implementing Protective Functions In BPCS an Combined Systems, Kenexis Consulting Corporation, 2006.
http://www.isa.org
[32] Magnetrol International, “Understanding Safety Instrumented Systems and Safety Integrity Level”
http://www.magnetrol.com
[33] Hartford DND, Baecher GB, Risk and Uncertainty in Dam Safety, Thomas Telford Ltd, London, 2004.
[34] Fthenakis VM, Trammell SR, Reference Guide for Hazard Analysis in PV Facilities, Brookhaven National Laboratory, New York, September 2003.
[35] 林瑞玉、呂信忠,矽甲烷廠務系統危害辨識與量化風險分析技術手冊,工業技術研究院環境與安全衛生技術發展中心,新竹,2003。
[36] 茂迪股份有限公司南科園區分公司職災鑑定報告,勞工安全衛生研究所。
[37] ANSI/CGA G-13-2006 Storage and Handling of Silane and Silane Mixtures, 2nd ed, Compressed Gas Association, Chantilly, 2006.
[38] SEMI S18-1102 - Environmental, Health, and Safety Guideline for Silane Family Gases Handling, Semiconductor Equipment and Materials International, San Jose, 2002.
[39] SEMI矽甲烷安全規範草案,財團法人安全衛生技術中心提供,2008。
[40] IEE Seminar, SIL Determination Principles and Practical Experience, Savoy Place, London, 28 March, 2007.
[41] Ngai EY, Huang KPP, Chen JR, Shen CC, Tsai HY, Chen SK, Hu SC, Yeh PY, Liu CD, Chang YY, Peng DJ, Wu HC, Field Tests of Release, Ignition, and Explosion from Silane Cylinder Valve and Gas Cabinet, Process Safety Progress, Vol. 26, Page 265-282, 2007.
[42] 消防水霧系統對矽甲烷洩漏燃燒後果影響E-Mail討論,中臺科技大學環境與安全衛生工程系,徐一量助理教授,2008年12月29日。
[43] 中央氣象局全球資訊網,“1991~2000台灣地區災害性地震”
http://www.cwb.gov.tw
[44] ISA-84 Process Safety Standards and User Resources, CD-ROM, International Society of Automation, Triangle Park, North Carolina, 2007.
[45] Safety Equipment Reliability Handbook, 2nd ed, Exida, Sellersville, PA, 2002.
[46] 行政院勞工委員會,“歷年職災實例”http://www.cla.gov.tw
[47] Sklet S, Methods for accident investigation, Norwegian University of Science and Technology, Norwegian, 2002.
[48] Hazard and Barrier Analysis Guidance Document, The Department of Energy, United States, November, 1996.
|