參考文獻 |
[1] ASM international handbook committee, Aluminum and aluminum
alloys, ASM International, pp. 20-22, 1993
[2] N.Taşaltın, S.Öztürk, N.Kılınç, H.Yüzer and Z.Z.Öztürk, “Simple
fabrication of hexagonally well-ordered AAO template on silicon
substrate in two dimensions”, Applied Physics A, Vol 95, pp.
781-787, 2009
[3] G.E.Thompson, H.Habazaki, K.Shimizu, M.Sakairi, P.Skeldon,
K.Zhou and G.C.Wood, “Anodizing of aluminium alloys”, Aircraft
Engineering and Aerospace Technology, Vol 71, pp. 228-238, 1999
[4] I.Vrublevsky, V.Parkoun, J.Schreckenbach and W.A.Goedel,
“Dissolution behaviour of the barrier layer of porous oxide films on
aluminum formed in phosphoric acid studiedby a re-anodizing
technique”, Applied Surface Science, Vol 252, pp. 5100-5108, 2006
[5] T.Dimogerontakis and I.T.Kaplanoglou, “The role of aluminum
anodizing conditions on the effect of the additivelight green”, Thin
Solid Films, Vol 402, pp. 121-125, 2002
[6] G.C.Wood, J.P.O’Sullivan and B.Vaszko, “The direct observation of
barrier layers in porous anodic oxide films”, Journal of the
Electrochemical Society, Vol 115, No 6, pp. 618-620, 1968
[7] H.Masuda and F.Hasegwa, “Self-ordering of cell arrangement of
anodic porous alumina formed in sulfuric acid solution”, Journal of
the Electrochemical Society, Vol 144, No 5, pp. 127-130, 1997
[8] 劉志維,「鋁鎂合金陽極處理技術之研發」,國立中央大學, 碩
士論文, 民國九十一年
[9] J.A.González, V.López, E.Otero and A.Bautista, “Postsealing
changes in porous aluminum oxide films obtained in sulfuric acid
solutions”, Journal of the Electrochemical Society, Vol 147, No 3,
pp. 984-990, 2000
[10] S.Feliu, J.Ma, J.Bartolomé and J.A.González, “XPS
characterization of porous and sealed anodic films on aluminum
Alloys”, Journal of the Electrochemical Society, Vol 154, No 5, pp.
241-248, 2007
[11] M.J.Bartolome´, V.Lo´pez, E.Escudero, G.Caruana and
J.A.Gonza´lez, “Changes in the specific surface area of porous
aluminium oxide films during sealing”, Surface and Coatings
Technology, Vol 200, pp. 4530-4537, 2006
[12] Y.Goueffon, L.Arurault, C.Mabru, C.Tonon and P.Guigue, “Black
anodic coatings for space applications study of the process
parameters, characteristics and mechanical properties”, Journal of
Materials Processing Technology, Vol 209, pp. 5145-5151, 2009
[13] X.Zhao, W.Liu, Y.Zuo and L.Yang, “The cracking behaviors of
anodic films on 1050 and 2024 aluminum alloys after heating up to
300°C”, Journal of Alloys and Compounds, Vol 479, pp. 473-479,
2003
[14] W.Liu, Y.Zuo, S.Chen, X.Zhao and J.Zhao, “The effects of sealing
on cracking tendency of anodic films on 2024 aluminum alloy after
heating up to 300°C”, Surface and Coatings Technology, Vol 203,
pp. 1244-1251, 2004
[15] I.D. Graeve, H.Terryn and G.E.Thompson, “AC-anodising of aluminium:contribution to electrical and efficiency study”,
Electrochimica Acta, Vol 52, pp. 1227-1134, 2006
[16] G.E.Thompson, R.C.Furneaux, G.C.Wood, J.A.Richardson and J.S.
Goode, “Nucleation and growth of porous anodic films on
aluminium”, Nature, Vol 272, No 30, pp. 433-435, 1978
[17] Y.Xu, G.E.Thompson and G.C.Wood, “Mechanism of anodic film
growth on aluminum”, Transactions of the Institute of Metal
Finishing, Vol 63, pp. 98-103, 1985
[18] P.Skeldon, G.E.Thompson, S.J.Garcia-Vergara, L.I.Rubianes and
C.E.Blanco-Pinzon, “A tracer study of porous anodic alumina”,
Electrochemical and Solid-State Letters, Vol 9, No 11, pp. 47-51,
2006
[19] F.Li, L.Zhang and R.M.Metzger, “On the growth of highly ordered
pores in anodized aluminum oxide”, Chemistry of Materials, Vol 10,
pp. 2470-2480, 1998
[20] K.Wefers, “The mechanism of sealing of anodidc oxide coatings on
aluminum”, Aluminum, Vol 49, No 8, pp. 553-624, 1973
[21] S.H.Su, C.S.Li, F.B.Zhang and M.Yokoyama, “Characterization of
anodic aluminium oxide pores fabricated on aluminium templates”,
Superlattices and Microstructure, Vol 44, pp. 514-519, 2008
[22] K.V.Heber, “Studies on porous Al2O3 growth—I. physical model”,
Electrochimica Acta, Vol 23, pp. 127-133, 1978
[23] G.Patermarakis, K.Moussoutzanis and J.Chandrinos, “Discovery by
kinetic studies of the latent physicochemical processes and their
mechanisms during the growth of porous anodic alumina films in sulfate electrolytes”, Journal of Solid State Electrochemistry, Vol 6,
pp. 39-54, 2001
[24] P.S.Wei and T.S.Shih, “Monitoring the progressive development of
an anodized film on aluminum”, Journal of the Electrochemical
Society, Vol 154, No 11, pp. 678-683, 2007
[25] I.Farnan, R.Dupree, A.J.Forty, Y.S.Jeong, G.E.Thompson and G.C.
Wood, “Structural information about amorphous anodic alumina
from Al MAS NMR”, Philosophical Magazine Letters, Vol 59, No 4,
pp. 189-195, 1989
[26] T.P.Hoar and J.Yahalom, “The initiation of pores in anodic oxide
films formed on aluminum in acid solutions”, Journal of the
Electrochemical Society, Vol 110, No 6, pp. 614-621, 1963
[27] G.C.Wood and J.P.O’Sullivan, “The anodizing of aluminum in
sulphate solutions”, Electrochimica Acta, Vol 15, pp. 1865-1876,
1970
[28] L.E.Fratila-Apachitei, J.Duszczyk and L.Katgerman, “AlSi(Cu)
anodic oxide layers formed in H2SO4 at low temperature using
different current waveforms”, Surface and Coatings Technology,
Vol 165, pp. 232-240, 2003
[29] I.T.Kaplanoglou, S.Theohari ,T.Dimogerontakis, Y.M.Wang,
H.H.Kuo and S.Kia, “Effect of alloy types on the anodizing process
of aluminum”, Surface and Coatings Technology, Vol 200, pp.
2634-2641, 2006
[30] G.Patermarakis and H.S.Karayannis, “The mechanism of growth of
porous anodic Al2O3 films on aluminium at high film thicknesses”,Electrochimica Acta, Vol 40, No 16, pp. 2647-2656, 1995
[31] M.A.Paez, O.Bustos, G.E.Thompson, P.Skeldon, K.Shimizu and
G.C.Wood, “Porous anodic film formation on an Al-3.5 wt % Cu
alloy”, Journal of the Electrochemical Society, Vol 147, No 3, pp.
1015-1020, 2000
[32] S.Werick, R.Pinner and P.G.Sheasby, The surface treatment and
finishing of aluminum and it’s alloys, ASM International , Ohio, pp.
829, 1987
[33] L.Hao and B.R.Cheng, “Sealing processes of anodic coatings—past
present and future”, Metal finishing, Vol 98, pp. 8-18, 2000
[34] V.López, M.J.Bartolomé, E.Escudero, E.Otero and J.A.González,
“Comparison by SEM, TEM, and EIS of hydrothermally sealed and
cold sealed aluminum anodic oxides”, Journal of the
Electrochemical Society, Vol 153, No 3, pp. 75-82, 2006
[35] S.Werick, R.Pinner and P.G.Sheasby, The surface treatment and
finishing of aluminum and it’s alloys, ASM International, Ohio, pp.
801, 1987
[36] O.J.Murphy, J.S.Wainright, J.J.Lenczewski, J.H.Gibson and M.W.
Santana, “Spectroscopic investigations of porous and sealed anodic
alumina films”, Journal of the Electrochemical Society, Vol 136,
No 11, pp. 3518-3525, 1989
[37] L.Hao, “How sealing can enhance the coating performance of
anodized aluminum”, Light metal age, Vol 59, pp. 12-18, 2001
[38] A.Dito and F.Tegiacchi, “Cold sealing of anodized aluminum with
nickel salt solutions”, Plating and Surface Finishing, Vol 72, pp.72-78, 1985
[39] E.Escudero, V.López, E.Otero, M.J.Bartolomé and J.A.González,
“Behaviour of anodised aluminium in very long-term atmospheric
exposure”, Surface and Coatings Technology, Vol 201, pp.
7303-7309, 2007
[40] S.Feliu, J.A.Gonza´lez, V.Lo´pez and M.J.Bartolome,
“Characterisation of porous and barrier layers of anodic oxides on
different aluminium alloys”, Journal of Applied Electrochemistry,
Vol 37, pp. 1027-1037, 2007
[41] J.J.Suay, E.Gimenez, T.Rodriguez, K.Habbib and J.J.Saura,
“Characterization of anodized and sealed aluminium by EIS”,
Corrosion Science, Vol 45, pp. 611-624, 2003
[42] F.Snogan, C.Blanc, G.Mankowski and N.Pebere, “Characterisation
of sealed anodic films on 7050 T74 and 2214 T6 aluminium alloys”,
Surface and Coatings Technology, Vol 154, pp. 94-103, 2002
[43] T.S.Shih, P.S.Wei and Y.S.Huang, “Optical Properties of Anodic
Aluminum Oxide Films on Al1050 Alloys”, Surface and Coatings
Technology, Vol 202, pp. 3298-3305, 2008
[44] N.Tabrizian, H.N.Hansen, P.E.Hansen, R.Ambat and P.Møller,
“Influence of annealing and deformation on optical properties of
ultra precision diamond turned and anodized 6060 aluminium
alloy”, Surface and Coatings Technology, Vol 204, pp. 2632-2638,
2010
[45] 柯賢文, 腐蝕及其防制, 全華科技圖書出版社, 頁5, 民國八十
七年
[46] E.Gileadi and E.K.Eisner, “Some observations concerning the Tafel
equation and its relevance to charge transfer in corrosion”,
Corrosion Science, Vol 47, pp. 3068-3085, 2005
[47] 柯賢文, 腐蝕及其防制, 全華科技圖書出版社, 頁9, 民國八十
七年
[48] 柯賢文, 腐蝕及其防制, 全華科技圖書出版社, 頁134, 民國八
十七年
[49] M.G.Fontana, Corrosion engineering, third edition, McGraw-Hill,
New York, pp. 53-67, 1986
[50] H.Bohni and H.H.Uhlig, “Environmental Factors Affecting the
Critical Pitting Potential of Aluminum”, Journal of the
Electrochemical Society, Vol 116, No 7, pp. 906-910, 1969
[51] J.M.Kolotyrkin, “Effects of anions on the dissolution kinetics of
metals”, Journal of the Electrochemical Society, Vol 108, No 3, pp.
209-216, 1961
[52] T.P.Hoar and W.R.Jacob, “Breakdown of passivity of stainless steel
by halide ions”, Nature, Vol 216, pp. 1299-1301, 1967
[53] T.P.Hoar, “The production and breakdown of the passivity of
metals”, Corrosion Science, Vol 7, pp. 341-355, 1967
[54] N.Sato, “A theory for breakdown of anodic oxide films on metals”,
Electrochimica Acta, Vol 16, pp. 1683-1692, 1971
[55] L.F.Lin, C.Y.Cho and D.D.Macdonald, “A point defect model for
anodic passive films”, Journal of the Electrochemical Society, Vol
128, No 6, pp. 1194-1198, 1981
[56] 魏百盛, 「鋁合金熱合陽極皮膜與陽極皮膜成長行為之研究」,國立中央大學, 博士論文, 民國九十六年
[57] J.C.Walmsley, C.J.Simensen, A.BjØrgum, F.Lapique and K.Redford,
“The structure and impurities of hard DC anodic Layers on AA6060
aluminium alloy”, The Journal of Adhesion, Vol 84, pp. 543-561,
2008
[58] F.Lockwood, S.Lee and J.Faunce, “Pitting corrosion of 5052
aluminum alloy”, Application of Surface Science, Vol 20, pp.
339-346, 1985
[59] H.Ezuber, A.E.Houd and F.E.Shawesh, “A study on the corrosion
behavior of aluminum alloys in seawater”, Materials and Design,
Vol 29, pp. 801-805, 2008
[60] M.Trueba and P.S.Trasatti, “Study of Al alloy corrosion in neutral
NaCl by the pitting scan technique”, Materials Chemistry and
Physics, Vol 121, pp. 523-533, 2010
[61] J.J.Ren and Y.Zuo, “The growth mechanism of pits in NaCl solution
under anodic films on aluminum”, Surface and Coatings
Technology, Vol 191, pp. 311-316, 2005
[62] V.Moutarlier, M.P.Gigandet and J.Pagetti, “Characterisation of
pitting corrosion in sealed anodic films formed in sulphuric
sulphuric molybdate and chromic media”, Applied Surface Science,
Vol 206, pp. 237-249, 2003
[63] Y.Zuo, P.H.Zhao and J.M.Zhao, “The influences of sealing methods
on corrosion behavior of anodized aluminum alloys in NaCl
solutions”, Surface and Coatings Technology, Vol 166, pp. 237-242,
2003
[64] N.Voevodin, C.Jeffcoate, L.Simon, M.Khobaib and M.Donley,
“Characterization of pitting corrosion in bare and sol–gel coated
aluminum 2024-T3 alloy”, Surface and Coatings Technology, Vol
140, pp. 29-34, 2001
[65] Ginés, Color model and color wheels, 取自
http://personales.upv.es/gbenet/teoria%20del%20color/water_color/
color6.html#LAB1, 2001
[66] R.S.Alwitt, J.Xu and R.C.M.Clung, “Stresses in sulfuric acid
anodized coatings on aluminum”, Journal of the Electrochemical
Society, Vol 140, No 5, pp. 1241-1246, 1993
[67] K.Shimizu, H.Habazaki, P.Skeldon, G.E.Thompson and G.C.Wood,
“GDOES depth profiling analysis of a thin surface film on
aluminium”, Surface and Interface Analysis, Vol 27, pp. 998-1002,
1999
[68] L.Li , S.H.Chen, X.G.Yang ,C.Wang and W.J.Guo, “Pitting corrosion
induced current oscillations during electrodissolution of Al in HClO4
solutions”, Journal of Electro-analytical Chemistry, Vol 572, pp.
41-49, 2004
[69] K.Shimizu, H.Habazaki, P.Skeldon, G.E.Thompson and G.C.Wood,
“Migration of oxalate ions in anodic alumina”, Electrochimica Acta,
Vol 46, pp. 4379-4382, 2001
[70] S.I.Pyun, S.M.Moon, S.H.Ahn and S.S.Kim, “Effects of Cl-, NO3
- and
SO4
2- ions on anodic dissolution of pure aluminum in alkaline
solution”, Corrosion Science, Vol 41, pp. 653-667, 1999
[71] K.S.Rao and K.P.Rao, “Pitting corrosion of heat-treatable aluminum
alloys and welds: a review”, Trasactions of the Indian Institute of
Metals, Vol 57, pp. 593-610, 2004
[72] Z.S.Smialowska, “Pitting corrosion of aluminum”, Corrosion Science,
Vol 41, pp. 1743-1767, 1999
[73] Z.Ahmad, A.U.Hamid and B.J.A.Aleem, “The corrosion behavior of
scandium alloyed Al 5052 in neutral sodium chloride solution”,
Corrosion Science, Vol 43, pp. 1227-1243, 2001
|