參考文獻 |
[1] N. Holonyak, Jr. and S. F. Bevacqua, “Coherent (visible) light emission from Ga(As1-x Px) junctions,” Appl. Phys. Lett. 1, 82-83 (1962).
[2] S. Nakamura, T. Mukai, and M. Senoh, “Candela-class high-brightness InGaN/AIGaN double-heterostructure blue-light-emitting diodes,” Appl. Phys. Lett. 64, 1687-1689 (1994).
[3] S. Nakamura, T. Mukai, and M. Senoh, “High-brightness InGaN/AIGaN double-heterostructure blue-green-lightemitting diodes,” J. Appl. Phys. 76, 8189-8191 (1994).
[4] Y. Shimizu, K. Sakano, Y. Noguchi, and T. Moriguchi, “Light emitting device having a nitride compound semiconductor and a phosphor containing a garnet fluorescent material,” United States Patent, US 5998925, Dec.7 (1999).
[5] T. F. McNulty, D. D. Doxsee, and J. W. Rose, “UV reflector and UV-based light source having reduced UV radiation leakage incorporating the same,” United States Patent, Us 6686676 B2 (2004).
[6] J. Yu, C. F. Guo, Z. Y. Ren, and J. T. Bai, “Photoluminescence of double-color-emitting phosphor Ca5(PO4)3Cl:Eu2+, Mn2+ for near-UV LED,” Opt. Laser Technol. 43, 762-766 (2011).
[7] W. J. Park, Y. H. Song, and D. H. Yoon, “Synthesis and luminescent characteristics of Ca2-xSrxSiO4:Eu2+ as a potential green-emitting phosphor for near UV-white LED applications,” Mater. Sci. Eng. B 173, 76-79 (2010).
[8] Y. Sato, N. Takahashi, and S. Sato, “Full-color fluorescent display devices using a near-UV light-emitting diode,” Jpn. J. Appl. Phys. 35, 838-839 (1996).
[9] C. H. Hung and C. H. Tien, “Phosphor-converted LED modeling by bidirectional photometric data,” Opt. Express 18, A261-A271 (2010).
[10] P. Schlotter, R. Schmidt, and J. Schneider, “Luminescence conversion of blue light emitting diodes,” Appl. Phys. A 64, 417-418 (1997).
[11] S. Nakamura and G. Fasol, The Blue Laser Diode: GaN based light emitters and lasers (Spinger, Berlin and New York, 1997).
[12] R. Mueller-Mach, G. Mueller, M. R. Krames, H. A. Höppe, F. Stadler, W. Schnick, T. Juestel, and P. Schmidt, “Highly efficient all-nitride phosphor- converted white light emitting diode,” Phys. Stat. Sol. 202, 1727-1732 (2005).
[13] C. C. Yang, C. M. Lin, Y. J. Chen, Y. T. Wu, and S. R. Chuang, “Highly stable three-band white light from an InGaN-based blue light-emitting diode chip precoated with (oxy)nitride green/red phosphors,” Appl. Phys. Lett. 90, 123501: 1-3 (2007).
[14] W. Chung, H. J. Yu, S. H. Park, B. H. Chun, and S. H. Kim, “YAG and CdSe/ZnSe nanoparticles hybrid phosphor for white LED with high color rendering index,” Mater. Chem. Phys. 126, 162–166, (2011).
[15] S. Muthu, F. J. P. Schuurmans, and M. D. Pashley, “Red, green, and blue LEDs for white light illumination,” IEEE J. Select. Topics Quantum Electron. 8, 333-338 (2002).
[16] A. Zukauskas, F. Ivanauskas, R. Vaicekauskas, M. S. Shur, and R. Gaska, “Optimization of multichip white solid-state lighting source with four or more LEDs,” Proc. SPIE 4445, 148-155 (2001).
[17] LEDinside, http://www.ledinside.com.tw/node/9288.
[18] LEDinside, http://www.ledinside.com.tw/node/15432.
[19] LEDinside, http://www.ledinside.com.tw/node/15440.
[20] R. C. Jordan, J. Bauer, and H. Oppermann, “Optimized heat transfer and homogeneous color converting for ultra high brightness LED package,” Proc. SPIE 6198, 61980B-1-61980B-12 (2006).
[21] M. Aril, S. Weaver, C. Becker, M. Hsing, and A Srivastava, “Effects of localized heat generations due to the color conversion in phosphor particles and layers of high brightness light emitting diodes,” Presented at ASME/IEEE Int. Electronic Packaging Technical Conf. and Exhibition 1, 611-619 (2003).
[22] N. Narendran, Y. Gu, J. P. Freyssinier-Nova, and Y. Zhu, “Extracting phosphor-scattered photons to improve white LED efficiency,” Phy. Stat. Sol. (a) 202, R60-R62 (2005).
[23] H. Luo, J. K. Kim, E. F. Schubert, J. Cho, C. Sone, and Y. Park, “Analysis of high-power packages for phosphor-based white-light-emitting diodes,” Appl. Phys. Lett. 86, 243505: 1-3 (2005).
[24] S. C. Allen and A. J. Steckl, “ELiXIR- solid-state luminaire with enhanced light extraction by internal,” J. Display Technol. 3, 155-159 (2007).
[25] Z. Liu, S. Liu, K. Wang, and X. Luo, “Effects of phosphor’s location on LED packaging performance,” ICEPT-HDP, 1-7 (2008).
[26] D. A. Steigerwald, J. C. Bhat, D. Collins, R. M. Fletcher, M. O. Holcomb, M. J. Ludowise, P.S. Martin, and S. L. Rudaz, “Illumination with solid state lighting technology,” IEEE J. Select. Topics Quantum Electron. 8, 310-320 (2002).
[27] H. T. Huang, C. C. Tsai, and Y. P. Huang, “Conformal phosphor coating using pulsed spray to reduce color deviation of white LEDs,” Opt. Express 18, A201-A206 (2010).
[28] B. Hou, H. B. Rao, and J. F. Li, “Methods of increasing luminous efficiency of phosphor-converted LED realized by conformal phosphor coating,” J. Display Technol. 5, 57-60 (2009).
[29] M. T. Lin, S. P. Ying, M. Y. Lin, K. Y. Tai, S. C. Tai, C. H. Liu, J. C. Chen, and C. C. Sun, “Ring remote phosphor structure for phosphor-converted white LEDs,” Photon. Technol. Lett. 22, 574-576 (2010).
[30] C. Sommer, F. Reil, J. R. Krenn, P. Hartmann, P. Pachler, S. Tasch, and F. P. Wenzl, “The impact of inhomogeneities in the phosphor distribution on the device performance of phosphor-converted high-power white LED light sources,” J. Lightw. Technol. 28, 3226-3232 (2010).
[31] Z. Y. Liu, S. Liu, K. Wang, and X. B. Luo, “Studies on optical consistency of white LEDs affected by phosphor thickness and concentration using optical simulation,” IEEE Transactions on Components and Packaging Technologies 33, 680-687 (2010).
[32] Z. Y. Liu, S. Liu, K. Wang, and X. B. Luo, “Status and prospects for phosphor-based white LED packaging,” Frontiers of Optoelectronics in China 2, 119-140 (2009).
[33] E. F. Schubert, Light-emitting Diodes (Cambridge University Press, New York, 2006).
[34] 劉如熹、劉宇桓,發光二極體用氧氮螢光粉介紹,全華圖書股份有限公司,台北市,中華民國九十五年。
[35] Philips Lumileds Lighting Company, http://www.philipslumileds.com/uploads/26/DS41-pdf.
[36] Philips Lumileds Lighting Company, http://www.philipslumileds.com/pdfs/DS63.pdf.
[37] Cree, Inc., www.cree.com/products/xlamp_xpe.asp.
[38] 何信穎,白光 LED 之YAG 螢光粉光學模型之研究,國立中央大學光電科學與工程學系碩士論文,民國九十六年。
[39] 紀葦世,高效能YAG螢光粉之特性量測與模型,元智大學光電工程研究所碩士論文,民國九十九年。
[40] S. A. Schafer, “Quasi-Monte Carlo methods: applications to modeling of light transport in tissue,” Proc. SPIE 2681, 317-324 (1996).
[41] Z. Liu, K. Wang, X. Luo, and S. Liu, “Precise optical modeling of blue light-emitting diodes by Monte Carlo ray-tracing,” Opt. Express 18, 9398-9412 (2010).
[42] D. Toublanc, “Henyey-Greenstein and Mie phase functions in Monte Carlo radiative transfer computations,” Appl. Opt. 35, 3270-3274 (1996).
[43] Cree, Inc., http://www.cree.com/products/pdf/CPR3DW.pdf.
[44] 陳靜儀,矽酸鹽螢光粉用於白光LED之光學模型,國立中央大學光電科學與工程學系碩士論文,民國九十七年。
[45] 陳正健,白光LED封裝光學品質之研究,國立中央大學光電科學與工程學系碩士論文,民國九十七年。
|