參考文獻 |
[1] WirelessHD. [Online]. Available: http://www.wirelesshd.org
[2] R.C. Daniels and R.W. Heath, "60 GHz wireless communications: emerging requirements and design recommendations," IEEE Vehicular Technology Magazine, vol.2, no.3, pp.41-50, Sept. 2007.
[3] N. Flaherty, "Hi-def goes wireless - [comms wireless HD]," Engineering & Technology, vol.3, no.15, pp.74,75, Sept. 2008.
[4] P. Smulders, "Exploiting the 60 GHz band for local wireless multimedia access: prospects and future directions," IEEE Commun. Mag., vol.40, no.1, pp.140-147, Jan. 2002.
[5] A. Maltsev, R. Maslennikov, A. Sevastyanov, A. Khoryaev, and A. Lomayev, "Experimental investigations of 60 GHz wireless systems in office environment, " IEEE J. Select. Areas Commun., vol. 27, no. 8, Oct. 2009.
[6] Wireless Gigabit Alliance. [Online]. Available: http://wirelessgigabitalliance.org/
[7] IEEE 802.11 Working Group. Very high throughput in 60 GHz. [Online]. Available: http://www.ieee802.org/11/Reports/tgad_update.htm
[8] S.K. Reynolds, B.A. Floyd, U.R. Pfeiffer, T. Beukema, J. Grzyb, C. Haymes, B. Gaucher, and M. Soyuer, "A silicon 60-GHz receiver and transmitter chipset for broadband communications," IEEE J. Solid-State Circuits, vol.41, no.12, pp.2820-2831, Dec. 2006.
[9] D.A. Sobel and R.W. Brodersen, "A 1Gbps mixed-signal analog front end for a 60GHz wireless receiver," in Proc. IEEE Symp. VLSI Circuits, June 2008, pp.156-157.
[10] A. M. Niknejad and H. Hashemi, Eds., mm-Wave Silicon Technology: 60 GHz and Beyond, Springer, 2008.
[11] A.M. Niknejad, "Siliconization of 60 GHz," IEEE Microw. Mag., vol.11, no.1, pp.78-85, Feb. 2010.
[12] A. Maltsev, R. Maslennikov, A. Sevastyanov, A. Khoryaev, and A. Lomayev, "Experimental investigations of 60 GHz WLAN systems in office environment," IEEE J. Select. Areas Commun., vol.27, no.8, pp.1488-1499, Oct. 2009.
[13] S.K. Reynolds, B.A. Floyd, U.R. Pfeiffer, T. Beukema, J. Grzyb, C. Haymes, B. Gaucher, and M. Soyuer, "A Silicon 60-GHz receiver and transmitter chipset for broadband communications," IEEE J. Solid-State Circuits, vol.41, no.12, pp.2820-2831, Dec. 2006.
[14] S.E. Gunnarsson, C. Karnfelt, H. Zirath, R. Kozhuharov, D. Kuylenstierna, A. Alping, and C. Fager, "Highly integrated 60 GHz transmitter and receiver MMICs in a GaAs pHEMT technology," IEEE J. Solid-State Circuits, vol.40, no.11, pp. 2174-2186, Nov. 2005.
[15] A. Natarajan, A. Komijani, G. Xiang, A. Babakhani, and A. Hajimiri, "A 77-GHz phased-array transceiver with on-chip antennas in silicon: transmitter and local LO-path phase shifting," IEEE J. Solid-State Circuits, vol.41, no.12, pp.2807-2819, Dec. 2006.
[16] M. Tiebout, H. Wohlmuth, H. Knapp, R. Salerno, M. Druml, M. Rest, J. Kaeferboeck, J. Wuertele, S.S. Ahmed, A. Schiessl, R. Juenemann, and A. Zielska, "Low power wideband receiver and transmitter chipset for mm-wave imaging in SiGe bipolar technology," IEEE J. Solid-State Circuits, vol.47, no.5, pp.1175-1184, May 2012.
[17] A.C. Heiberg, T.W. Brown, T.S. Fiez, K. Mayaram, "A 250 mV, 352 W GPS receiver RF front-end in 130 nm CMOS," IEEE J. Solid-State Circuits, vol.46, no.4, pp.938-949, Apr. 2011.
[18] A. Parsa and B. Razavi, "A new transceiver architecture for the 60-GHz band," IEEE J. Solid-State Circuits, vol.44, no.3, pp.751-762, Mar. 2009.
[19] J. Lee, Y. Chen, and Y.-L. Huang, "A low-power low-cost fully-integrated 60-GHz transceiver system with OOK modulation and on-board antenna assembly," IEEE J. Solid-State Circuits, vol.45, no.2, pp.264-275, Feb. 2010.
[20] D. Dawn, P. Sen, S. Sarkar, B. Perumana, S. Pinel, and J. Laskar, "60-GHz integrated transmitter development in 90-nm CMOS," IEEE Trans. Microwave Theory Tech., vol.57, no.10, pp.2354-2367, Oct. 2009.
[21] B. Razavi, RF and Microelectronics (2nd Edition). Upper Saddle River, NJ: Prentice-Hall, Oct. 2011.
[22] B. Razavi, Design of Analog CMOS Integrated Circuits. New York: McGraw-Hill, 2001, ch. 2, pp. 13-28.
[23] H.-J. Wei, C.-C. Meng, T.-W. Wang, T.-L. Lo, and C.-L. Wang, "60-GHz dual-conversion Down-/Up-Converters Using Schottky Diode in 0.18-m Foundry CMOS technology," IEEE Trans. Microwave Theory Tech., vol.60, no.6, pp.1684-1698, June 2012.
[24] P.-C. Huang, R.-C. Liu, J.-H. Tsai, H.-Y. Chang, H. Wang, J. Yeh, C.-Y. Lee, and J. Chern, "A compact 35-65 GHz up-conversion mixer with integrated broadband transformers in 0.18-m SiGe BiCMOS technology," in IEEE Radio Frequency Integrated Circuits (RFIC) Symp., June 2006. pp., 11-13.
[25] F. Zhang, E. Skafidas, and W. Shieh, "60 GHz double-balanced up-conversion mixer on 130 nm CMOS technology," Electronics Lett., vol.44, no.10, pp.633-634, May 8 2008.
[26] I.C.H. Lai, Y. Kambayashi, M. Fujishima, "50 GHz double-balanced up-conversion mixer using CMOS 90 nm process," in Proc. IEEE Int. Symp. Circuits Syst., May 2007, pp.2542-2545.
[27] J.-H. Tsai, "Design of 40–108-GHz low-power and high-speed CMOS up-/down-conversion ring mixers for multistandard MMW radio applications," IEEE Trans. Microwave Theory Tech., vol.60, no.3, pp.670-678, Mar. 2012.
[28] R. Mongia, I. Bahl, and P. Bhartia, RF and Microwave Coupled-Line Circuits. Norwod, MA: Artech House, 1999.
[29] J.-X. Liu, C.-Y. Hsu, H.-R. Chuang, and C.-Y. Chen, "A 60-GHz millimeter-wave CMOS marchand balun," in IEEE Radio Frequency Integrated Circuits (RFIC) Symp., June 2007, pp.445-448.
[30] C.-C. Kuo, C.-L. Kuo, C.-J. Kuo, S.A. Maas, and H. Wang, "Novel miniature and broadband millimeter-wave monolithic star mixers," IEEE Trans. Microwave Theory Tech., vol.56, no.4, pp.793-802, Apr. 2008.
[31] M.-J. Chiang, H.-S. Wu, and C.-K. C. Tzuang, "A compact CMOS marchand balun incorporating meandered multilayer edge-coupled transmission lines," in IEEE MTT-S Int. Microwave Symp. Dig., June 2009, pp.125-128.
[32] D.A.A. Mat, R.K. Pokharel, R. Sapawi, H. Kanaya, and K. Yoshida, "60GHz-band on-chip Marchand balun designed on flat and patterned ground shields for milimeter-wave 0.18-m CMOS technology," in Proc. 2011 Asia-Pacific Microw. Conf., 5-8 Dec. 2011, pp.884-887.
[33] H.-K. Chiou and T.-Y. Yang, "Low-loss and broadband asymmetrical broadside-coupled balun for mixer design in 0.18-m CMOS technology," IEEE Trans. Microwave Theory Tech., vol.56, no.4, pp.835-848, Apr. 2008.
[34] H.-K. Chiou and J.-Y. Lin, "Symmetric offset stack balun in standard 0.13-m CMOS technology for three broadband and low-loss balanced passive mixer designs," IEEE Trans. Microwave Theory Tech., vol.59, no.6, pp.1529-1538, June 2011.
[35] Y. Sun and C.J. Scheytt, "A 122 GHz sub-harmonic mixer with a modified APDP topology for IC integration," IEEE Microw. Wireless Compo. Lett., vol.21, no.12, pp.679-681, Dec. 2011.
[36] H.-Y. Yang, J.-H. Tsai, C.-H. Wang, C.-S. Lin, W.-H. Lin, K.-Y. Lin, T.-W. Huang, and H. Wang, "Design and analysis of a 0.8–77.5-GHz ultra-broadband distributed drain mixer using 0.13-m CMOS technology," IEEE Trans. Microwave Theory Tech., vol.57, no.3, pp.562-572, Mar. 2009.
[37] F. Ellinger, L.C. Rodoni, G. Sialm, C. Kromer, B.G. Von, M.L. Schmatz, C. Menolfi, T. Toifl, T. Morf, M. Kossel, and H. Jackel, "30-40-GHz drain-pumped passive-mixer MMIC fabricated on VLSI SOI CMOS technology," IEEE Trans. Microwave Theory Tech., vol.52, no.5, pp.1382-1391, May 2004.
[38] F. Ellinger, "26.5–30-GHz resistive mixer in 90-nm VLSI SOI CMOS technology with high linearity for WLAN," IEEE Trans. Microwave Theory Tech., vol.53, no.8, pp.2559-2565, Aug. 2005.
[39] T.-Y. Yang and H.-K. Chiou, "A 16–46 GHz mixer using broadband multilayer balun in 0.18-μm CMOS technology," IEEE Microw. Wireless Compo. Lett., vol.17, no.7, pp.534-536, July 2007.
[40] H.-Y. Yang, J.-H. Tsai, T.-W. Huang, and H. Wang, "Analysis of a new 33–58-GHz doubly balanced drain mixer in 90-nm CMOS technology," IEEE Trans. Microwave Theory Tech., vol.60, no.4, pp.1057-1068, Apr. 2012.
[41] M. Parlak and J.F. Buckwalter, "A passive I/Q millimeter-wave mixer and switch in 45-nm CMOS SOI," IEEE Trans. Microwave Theory Tech., vol.61, no.3, pp.1131-1139, Mar. 2013.
[42] J.-H. Tsai and T.-W. Huang, "35–65-GHz CMOS broadband modulator and demodulator with sub-harmonic pumping for MMW wireless gigabit applications," IEEE Trans. Microwave Theory Tech., vol.55, no.10, pp.2075-2085, Oct. 2007.
[43] J.-H. Tsai, P.-S. Wu, C.-S. Lin, T.-W. Huang, J.G.J. Chern, and W.-C. Huang, "A 25–75 GHz broadband Gilbert-cell mixer using 90-nm CMOS technology," IEEE Microw. Wireless Compo. Lett., vol.17, no.4, pp.247-249, Apr. 2007.
[44] C.-Y. Wang and J.-H. Tsai, "A 51 to 65 GHz low-power bulk-driven mixer using 0.13-m CMOS technology," IEEE Microw. Wireless Compo. Lett., vol.19, no.8, pp.521-523, Aug. 2009.
[45] J.-H. Tsai, "Design of 1.2-V broadband high data-rate MMW CMOS I/Q modulator and demodulator Using presented Gilbert-cell mixer," IEEE Trans. Microwave Theory Tech., vol.59, no.5, pp.1350-1360, May 2011.
[46] J. Kim, K.T. Kornegay, J. Alvarado, C.-H. Lee, and J. Laskar, "W-band double-balanced down-conversion mixer with Marchand baluns in silicon-germanium technology," Electronics Lett., vol.45, no.16, pp.841-843, July 30 2009.
[47] J.-J. Kuo, C.-H. Lien, Z.-M. Tsai, K.-Y. Lin, K. Schmalz, J.C. Scheytt, and H. Wang, "Design and analysis of down-conversion gate/base-pumped harmonic mixers using novel reduced-size 180o hybrid with different input frequencies," IEEE Trans. Microwave Theory Tech., vol.60, no.8, pp.2473-2485, Aug. 2012.
[48] C.-H. Lien, P.-C. Huang, K.-Y. Kao, K.-Y. Lin, and H. Wang, "60 GHz double-balanced Gate-pumped down-conversion mixers with a combined hybrid on 130 nm CMOS processes," IEEE Microw. Wireless Compo. Lett., vol.20, no.3, pp.160-162, Mar. 2010.
[49] F. Zhang, B. Yang, E. Skafidas, and W. Shieh, "5-75 GHz common-gate subharmonic mixer in 65 nm CMOS," Electronics Lett., vol.46, no.17, pp.1203-1205, Aug. 2010.
[50] D.-H. Kim, S.-J. Kim, and J.-S. Rieh, "A 60 GHz wideband quadrature-balanced mixer based on 0.13-m RFCMOS technology," IEEE Microw. Wireless Compo. Lett., vol.21, no.4, pp.215-217, Apr. 2011.
[51] C.-W. Byeon, J.-J. Lee, I.-S. Song, and C.-S. Park, "A 60 GHz current-reuse LO-boosting mixer in 90 nm CMOS," IEEE Microw. Wireless Compo. Lett., vol.22, no.3, pp.135-137, Mar. 2012.
[52] N. Zhang, H. Xu, H.-T. Wu, and K.O. Kenneth, "W-Band active down-conversion mixer in bulk CMOS," IEEE Microw. Wireless Compo. Lett., vol.19, no.2, pp.98-100, Feb. 2009.
[53] H.-T. Chou, J.-R. Liang, H.-K. Chiou, "V-band low-power Darlington-pair gate-pumped mixer with thin-film LC-hybrid linear combiner in 90 nm CMOS," Electronics Lett., vol.48, no.16, pp.1023-1024, Aug. 2012.
[54] A.V. Do, C.C. Boon, A.V. Do, K.-S. Yeo, and A. Cabuk, "A weak-inversion low-power active mixer for 2.4 GHz ISM band applications," IEEE Microw. Wireless Compo. Lett., vol.19, no.11, pp.719-721, Nov. 2009.
[55] W.-T. Li, H.-Y. Yang, Y.-C. Chiang, J.-H. Tsai, M.-H. Wu, and T.-W. Huang, "A 453-W 53–70-GHz ultra-low-power double-balanced source-driven mixer using 90-nm CMOS technology," IEEE Trans. Microwave Theory Tech., vol.61, no.5, pp.1903-1912, May 2013.
[56] Sedra and Smith, “Microelectronic Circuits 4th ed.,” Oxford, U.K., Oxford Univ., 2006.
[57] C. Andrei, D. Gloria, F. Danneville, and G. Dambrine, "Efficient de-embedding technique for 110-GHz deep-channel-MOSFET characterization," IEEE Microw. Wireless Compo. Lett., vol. 17, no. 4, pp. 301-303, Apr. 2007.
[58] H. Cho, and D. E. Burk, "A three-step method for the de-embedding of high-frequency S-parameter measurements," IEEE Trans. Electron Devices, vol. 38, no. 6, pp. 1371-1375, June 1991.
[59] E. P. Vandamme, et.al, "Improved three-step de-embedding method to accurately account for influence of pad parasitics in silicon on-wafer RF test-structures," IEEE Trans. Electron Devices, vol. 48, no. 4, pp. 737-742, Apr. 2001.
[60] T. E. Kolding, "A four-step method for de-embedding gigahertz on-wafer CMOS measurements," IEEE Trans. Electron Devices, vol. 47, no. 4, pp. 734–740, Apr. 2000.
[61] C. H. Chen and M. J. Deen, "A general noise and S-parameter de-embedding procedure for on-wafer high-frequency noise measurements of MOSFETs," IEEE Trans. Microw. Theory Tech., vol. 49, no. 5, pp. 1004-1004, May 2001.
[62] L. F. Tiemeijer, R. J. Havens, A. B. M. Jansman, and Y. Bouttement, "Comparison of the ‘pad-open-short’ and ‘open-short-load’ de-embedding techniques for accurate on-wafer RF characterization of high quality passives, " IEEE Trans. Microw. Theory Tech., vol. 53, no. 2, pp. 723-729, Feb. 2005.
[63] J.R. Long, "Monolithic transformers for silicon RF IC design," IEEE J. Solid-State Circuits, vol.35, no.9, pp.1368-1382, Sept. 2000.
[64] T. H. Lee, The Design of CMOS Radio-Frequency Integrated Circuits. Cambridge, U.K.: Cambridge Univ. Press, 1998.
[65] G. E. Ponchak and A.N. Downey, "Characterization of thin film microstrip lines on polyimide," IEEE Trans. Comp., Packag., Manufact. Technol. B, vol.21, no.2, pp.171-176, May 1998.
[66] H.-W. Wu, M.-H. Weng, Y.-K. Su, R.-Y. Yang, and C.-Y. Hung, "Equivalent lumped elements of DC-biased thin film microstrip line in MMICs," IEEE Microw. Wireless Compo. Lett., vol.17, no.9, pp.673-675, Sept. 2007.
[67] G. Six, G. Prigent, E. Rius, G. Dambrine, and H. Happy, "Fabrication and characterization of low-loss TFMS on silicon substrate up to 220 GHz," IEEE Trans. Microw. Theory Tech., vol.53, no.1, pp.301-305, Jan. 2005.
[68] F. Schnieder and W. Heinrich, "Model of thin-film microstrip line for circuit design," IEEE Trans. Microw. Theory Tech., vol.49, no.1, pp.104-110, Jan. 2001.
[69] J. Gondermann, E.G.S. von Kamienski, H.G. Roskos, and H. Kurz,, "Al-SiO2-Al sandwich microstrip lines for high-frequency on-chip interconnects," IEEE Trans. Microw. Theory Tech., vol.41, no.12, pp.2087-2091, Dec. 1993.
[70] Y. Wang, J.S. Duster, K.T. Kornegay, P. Hyun-min, and J. Laskar, "An 18GHz low noise high linearity active mixer in SiGe," in Proc. IEEE Int. Symp. Circuits Syst., May 2005, Vol. 4 ,pp. 3243-3246.
[71] H.-K. Chiou and H.-T. Chou, "A 0.4 V microwatt power consumption current-reused up-conversion mixer," IEEE Microw. Wireless Compo. Lett., vol.23, no.1, pp.40-42, Jan. 2013. |