參考文獻 |
[1]Hood Chatham, “Review Oxygen diffusion barrier properties of transparent oxide coating on polymeric substrates”, Surface and Coating Technology, 78, pp.1-9, 1996.
[2]Jay Lewis, “Material challenge for flexible organic devices”, Materials Today, vol. 9, Num. 4, 2006.
[3]陳良吉,OLED封裝技術介紹,化工第51卷第2期,2004。
[4]Y. F. Liew, H. Aziz, N. X. Hu, H. S. O. Chan, G. Xu, and Z. Popovic, “Investigation of the sites of dark spots in organic light-emitting devices”, Appl. Phys. Lett., 77, pp.2650, 2000.
[5]J. Fahlteich, M. Fahland, W. Schonberger, N. Schiller, “Permeation barrier properties of thin oxide films on flexible polymer substrates”, Thin Solid Films, 517, pp.3075–3080, 2009.
[6]W. Huang, X Wang, M. Sheng, L. Xu, F. Stybhan, L. Luo, T. Feng, X. Wang, F. Zhang, and S. Zou, “Low temperature PECVD SiNx films applied in OLED packaging”, Mat. Sci. Eng. B, 98, pp.248, 2003.
[7]A. M. Coclite, A Milella, R. d'Agostino, F. Palumbo, “On the relationship between the structure and the barrier performance of plasma deposited silicon dioxide-like films”, Surface & Coatings Technology, 204, pp.4012–4017, 2010.
[8]H. Chatham, Surf.Coat.Technol. 78, pp.1, 1996.
[9]Brian Chapman, “Glow Discharge Process”, (John Wiley & Sons, Canada, 1980).
[10]國科會精密儀器發展中心,真空技術與應用,國科會精密儀器發展中心,第71-79頁,台北,民國九十年。
[11]國科會精密儀器發展中心,真空技術與應用,國科會精密儀器發展中心,第369-386頁,台北,民國九十年。
[12]M. Ohring, “The Material Science of the Thin Films”, Academic Press, 1992.
[13]Alfred Grill, Cold Plasma in Materials Fabrication, IEEE Press, New York, 1994.
[14]Donald M. Mattox, Handbook of Physical Vapor Deposition (PVD) Processing,
Noyes Publications, Westwood, New Jersey, 1998.
[15]D. Nouguchi, Y. Kawamata, and T. Nagatomo, “Relationship between the photocatalytic chatacteristics and oxygen partial pressure of TiO2 thin films prepared by a DC reactive sputtering method”, Jpn. J. Appl. Phys., 43, pp.1581, 2004.
[16]楊士賢,「以脈衝式電漿輔助化學氣相沉積法製備氟化非晶薄膜之研究」,中原大學化學工程學系,碩士論文,民國94年。
[17]Q. Xie, J. Xu, L. Feng, L. Jiang, W. Tang, X. Luo, C. Han, “Facile creation of a super-amphiphobic coating surface with bionic microstructure”, Adv. Mater., 16, pp.302-205, 2004.
[18]C. Oehr, M. Muller, B. D. Hegemann, U. Vohree, Surf. Coat. Technol., 116-110, pp.25-35, 1999.
[19]D. Hegemann, R. Reidel, C. Oehr, Thin Solid Films, 339, pp.154-159, 1999.
[20]H. Yasuda., T. Hirotsu, “Critical evaluation of condition of plasma polymerization”, J. Polym. Sci. Pol. Chem., 16, pp.743, 1978.
[21]M. R. Alexander, F. R. Johns, R. D. Short, J. Phys. Chem., B 101, pp.3614, 1997.
[22]M. Goujon, T. Belmonte, G. Henrion, “OES and FTIR diagnostics of HMDSO/O2 gas mixtures for SiOx deposition assisted by RF plasma”, Surface and Coatings Technology, 188 –189, pp. 756–761, 2004.
[23]R. Atkinson, D. L. Baulch, R. A. Cox, R. F. Hampson Jr., J. A. Kerr, M. J. Rossi, J. Troe, J. Phys. Chem. Ref., Data26, pp.521, 1997.
[24]Y.G. Tropsha and N.G. Harvey, “Activated rate theory treatment of oxygen and water transport through silicon oxide/poly (ethylene terephthalate) composite barrier structures”, J. Phys. Chem. B, vol. 101, pp.2259-2266, 1997.
[25]R.M. Barrer, in Diffusion in and through Solids, Cambridge University Press, New York, 1941.
[26]A. S. da Silva Sobrinho, M. Latreche, G. Czeremuszkin, J. E. Klemberg-Sapieha, and M.R. Wertheimer, “Transparent barrier coatings on polyethylene terethalate by single- and dual-frequency plasma-enhanced chemical vapor deposition”, J. Vac. Sci. Technol. A, vol.16, pp. 3190-3198, 1998.
[27]B. M. Henry, A. G. Erlat, A. McGuigan, C. R. M. Grovenor, G. A. D. Briggs, Y. Tsukahara, T. Miyamoto, N. Noguchi, T. Niijima, Thin Solid Films, 382, pp. 194, 2001.
[28]W. Prins and J. J. Hermans, “Theory of permeation through metal coated polymer films” J.Phys. Chem., vol.63, pp.716-720, 1959.
[29]J. Crank, in The Mathematics of Diffusion, 2nd edition, Clarendon Press, Oxford, 1975.
[30]H. Daynes, Proc. Roy. Soc., (London) 97A, pp.286, 1920.
[31]G. L. Graff, P. E. Burrows, R. E. Williford, and R. F. Praino, in Flexible Flat Panel Display, edited by G.P. Crawford, John Wiley & Sons Ltd, Chichester, 2005.
[32]G. L. Graff. R. E. Williford, and P. E. Burrows, “Mechanisms of vapor permeation through multilayer barrier films: Lag time versus equilibrium permeation”, J. Appl. Phys., vol. 96, pp. 1840-1848, 2004.
[33]G. Erlat, B. M. Henry, J. J. Grovenor, G. A. D. Briggs, and Y. Tsukahara, “Characterisation of aluminium oxynitride gas barrier films”, Thin Solid Flims, vol. 388, pp. 78-86, 2001.
[34]J. H. Burroughs, D. D. C. Bradly, A. R. Brown, R. N. Marks, K. Mackay, R. H. Friedn, P. L. Burn, and A. B. Holmes, “light emitting diodes based on conjugated polymers”, Nature, vol.347, pp.539-541, 1990.
[35]E. H. H. Jamieson and A. H. Windle, “Structure and oxygen-barrier properties of metallized polymer film”, J. Mater. Sci., vol. 18, pp.64-80, 2004.
[36]M. Shaepkens, T. W. Kim, A. G. Erlet, M. Yan, K. W. Flanagan, C. M. Heller, and P. A McConnelee, “Ultrahigh barrier coating deposition on polycarbonate substrates”, J. Vac. Sci. Technol. A, vol. 22, pp. 1716-1722, 2004.
[37]A. Sugumoto, H. Ochi, S. Fujimura, A. Yoshida, T. Miyadera, M. Tsuchida, “Flexible OLED display using plastic substrates”, IEEE J. Sel. Top. Quant. Electron., 10, pp.107, 2004.
[38]Tsai-Ning Chen, “Design, Fabrication and Applications of Gas Barrier Coatings on Polymer Substrates”, National Chung Hsing University, Degree of Doctor of Philosophy, 2009.
[39]H. Chatham, “Oxygen diffusion barrier properties of transparent oxide coatings on polymeric substrates”, Surf. Coat. Tech., 78, pp.1, 1996.
[40]J. Weiss, “Parameters that influence the barrier properties of metallized polyester and polypropylene films”, Thin Solid Films, vol.204, pp.203-216, 1911.
[41]A. S. da Silva Sobrinho, G. Czeremuszkin, M. Latrèche, and M. R. Wertheimer, “Defect-permeation correlation for ultrathin transparent barrier coatings on polymers”, J. Vac. Sci. Technol. A 18, pp.149, 2000.
[42]A. G Erlat, B. M Henry, J. J Ingram, D. B Mountain, A McGuigan, “Characterization of aluminum oxynitride gas barrier films”, Thin Solid Films, Vol. 388, pp.78–86, 2001.
[43]B. M Henry, A. G Erlat, A McGuigan, C. R. M Grovenor, G. A. D Briggs, “Chatacterization of transparent aluminuim oxide and indium tin oxide layers on polymer substrates”, Thin Solid Films, Vol. 382, pp.194–201, 2001.
[44]G. Kaltenpoth, W Siebert, F Stubhan, X Wang, L Luo, “Moisture barrier properties of plasma enhanced chemical vapor deposited SiCxNy films on polyethylene naphthalate sheets and epoxy molding compound”, Surface and Coatings Technol., Vol. 161, pp.96-101, 2002.
[45]W. Huang, X. Wang, M. Sheng, L. Xu, F. Stubhan, L. Luo, T. Feng, X. Wang, F. Zhang, and S. Zou, Mater., “Low temperature PECVD SiN/sub x/ films applied in OLED packaging”, Sci. Eng., B 98, pp.248, 2003.
[46]K. Teshima, H. Sugimura, Y. Inoue, O. Takai, A. Takano, “Gas barrier performance of surface-modified silica films with grafted organosilane molecules”, Langmuir, 19, pp.10624-10627, 2003.
[47]D. Hegemann, H. Brunner, C. Oehr, “Evaluation of deposition conditions to design plasma coatings like SiOx and a-C:H on polymers”, Surface and Coatings Technol., 174–175, pp.253–260, 2003.
[48]M. Schaepkens, T.W. Kim, A.G. Erlet, M. Yan, K. W. Flanagan, C.M. Heller, and P. A. MoConnelee, “Ultrahigh barrier coating deposition on polycarbonate substrates”, J. Vac. Sci. Technol. A, vol. 22, pp.1716-1722, 2004.
[49]D. S. Wuu, W. C. Lo, C. C. Chiang, H. B. Lin, L. S. Chang, “Water and oxygen permeation of silicon nitride films prepated by plasma-enhanced chemical vapor deposition”, Surface & Coatings Technol., 198, pp.114-117, 2005.
[50]D. S. Wuu, W. C. Lo, C. C. Chiang, H. B. Lin, L. S. Chang, “Transparent barrier coatings on flexible polyethersulfone substrates for moisture-resistant applications”, Mater. Sci. Forum., vol. 475-479, pp.4017-4020, 2005.
[51]D. S. Wuu, T. N. Chen, C. C. Wu, C. C. Chiang, Y. P. Chen, R. H. Hirng, and F. S. Juang, “Transparent barrier coatings for flexible organic light-emitting diode applications”, Chem. Vap. Deposition, vol. 12, pp.220-224, 2006.
[52]John Fahlteich, Matthias Fahland, Waldemar Schönberger, Nicolas Schiller, “Permeation barrier properties of thin oxide films on flexible polymer substrates”, Thin Solid Films, 517, pp.3075–3080, 2009.
[53]Tsai-Ning Chen, “Design, Fabrication and Applications of Gas Barrier Coatings on Polymer Substrates”, National Chung Hsing University, Degree of Doctor of Philosophy, 2009.
[54]S. R. Kim, M. H. Choudhurya, W. H. Kima, G. H. Kimb, “properties of silicon oxide coatings deposited on polyethylene terephthalate by plasma enhanced chemical vapor deposition”, Thin Solid Films, Volume 518, pp.1929–1934, 2010.
[55]Yi. C. Lin, Q. K. Le, “Optimizing The Organic/Inorganic Barrier Structure For Flexible Plastic Substrate Encapsulation”, International Journal of Engineering and Technology Innovation, vol. 2, pp.184-194, 2012.
[56]Beadley Finnigan, Barrier polymers. December 8, 2011. Retrieved September, 2012, from http://packaging-technology.org/31-barrier-polymers.html.
[57]J. K. Mishra, K. J. Hwang, C. S. Ha, “Preparation, mechanical and rheological properties of a thermoplastic polyolefin (TPO)/organoclay nanocomposite with reference to the effect of maleic anhydride modified polypropylene as a compatibilizer”, Polymer 46, pp.1995–2002, 2005.
[58]G. M. Russo, G. P. Simon, and L. Incarnato, “Correlation between Rheological, Mechanical, and Barrier Properties in New Copolyamide-Based Nanocomposite Films”, Macromolecules, 39, pp.3855–3864, 2006.
[59]E. Picard, “Barrier properties of nylon 6-montmorillonite nanocomposite membranes prepared by melt blending: Influence of the clay content and dispersion state Consequences on modeling”, Journal of Membrane Science 292, pp.133–144, 2007.
[60]N. C. Da Cruz, S. F. Durrant, and M. A. Bica De Moraes, “Thin film deposition from plasma of tetramethylsilane-helium-argon mixtures with oxygen and with nitrogen”, J. Polym. Sci. Pol. Phys., 36, pp.1873, 1998.
[61]N. Inagaki, S. Tasaka, and M. Makino, “Plasma polymer deposition from mixture of tetramethoxysilane and oxygen on PET films and their oxygen gas barrier properties”, J. Appl. Polym. Sci., 64, pp.1031, 1997.
[62]K. Teshima, Y. Inoue, H. Sugimura, and O. Takaim “Room temperature deposition of high-purity silicon oxide films by RF plasma-enhanced CVD”, Surf. Coat. Tech., 146-147, pp.451, 2001.
[63]K. Aumaille, C. Vallee. A. Goullet, F. Gaboriau, G. Turban, Thin Solid films 359, pp.188, 2000.
[64]A. J. Lowe, M. J. Powell, and S. R. Elliott, “The electronic properties of plasma-deposition films of hydrogenated amorphous SiNx (0
[65]S. Iwamori, Y. Gotoh, and K. Moothi, “Silicon oxide gas barrier films deposited b reactive sputtering”, Surf. Coat. Tech., 166, pp.24, 2003.
[66]B. M. Henry, F. Dinelli, K. Y. Zhao, C. R. M. Grovenor, O. V. Kolosov, G. A. D. Briggs, A. P. Roberts, R. S. Kumar, and R. P. Howson, “A microstructural study of transparent metal oxide gas barrier films”, Thin Solid Films, 335-356, pp.500, 1999.
[67]汪建民,材料分析,材料科學學會,民國八十七年。
[68]許樹恩,吳泰伯,X光繞射原理與材料結構分析,第十二章,1996。
[69]M. Creatore, F. Palumbo, R. d’Agostino, “RF plasma deposition of SiO -like films: plasma phase diagnostics and gas barrier film properties optimization”, Surface and Coatings Technol., 142-144, pp.163-168, 2001.
[70]W.S. Liao, C. H. Lin, and S.C. Lee, “Oxidation of silicon nitride prepared by plasma-enhanced chemical vapor deposition at low temperature”, Appl. Plys. Lett., 65. pp.2229, 1994.
[71]W. T. Li, D. R. Mckenzie, W. D. Macfall, and Q. C. Zhang, “Effect of sputtering-gas pressure on properties of silicon nitride films produced by helicon plasma sputtering”, Thin Solid Films, 384, pp.46, 2001.
[72]吳權吉,「以反應性磁控濺鍍法製備矽化物氣體阻障層之研究」,中原大學化學工程學系,碩士論文,民國94年。
[73]D. Hegemann, U. Vohrer, C. Oehr, “Deposition of SiOx films from O2 /HMDSO plasmas”, Surface and Coatings Technol., 116–119, pp.1033–1036, 1999.
[74]E. Dehan, P. Temple-Boyer, R. Henda, J. J. Pedroviejo, E. Scheid, “Optical and structural properties of SiOx and SiN x materials”, Thin Solid Films, 266, p.14, 1995.
[75]P.G. Pai, S.S. Chao, Y. Takagi, G. Lucovsky, J. Vac. Sci. Technol. A 4, pp. 689, 1986.
[76]C.T. Kirk, Phys Rev B 38, pp.1255, 1988.
[77]G. Lucovsky, M. J. Manitini, J. K. Srivastava, E. A. Irene, J. Vac. Sci. Technol.B 5, pp.530, 1987.
[78]A. Brunet-Bruneau, D. Souche, S. Fisson, V. Nguyen Van, G. Vuye, F. Abeles,
J. Rivory, J. Vac. Sci. Technol. A 16, pp.2281, 1998.
[79]R.A.B. Devine, Appl. Phys. Lett. 68, pp.3108, 1996.
[80]Y. Kawaguchi, Phys. Rev. B 54, pp. 9721, 1996.
[81]A. Brunet-Bruneau, J. Rivory, B. Rafin, J.Y. Robic, P. Chaton, J. Appl. Phys. 82, pp.1330, 1997.
[82]T. Y. Lin, C.T. Lee, “Organosilicon function of gas barrier films purely deposited by inductively coupled plasma chemical vapor deposition system”, Journal of Alloys and Compounds 542, pp.11–16, 2012.
[83]P. Raynaud, B. Despax, Y. Segui, H. Caquineau, Plasma Process. Polym. 2, pp. 45–52, 2005.
[84]C.Y. Kim, S.H. Kim, H.S. Kim, R. Navamathavan, C.K. Choi, J. Korean Phys. Soc. 50, pp.1119–1124, 2007.
[85]呂登復,實用真空技術,國興出版社,2003。
[86]Dattatray S. Wavhal, Jianming Zhang, Michelle L. Steen, Ellen R. Fisher, “Investigation of Gas Phase Species and Deposition of SiO2 Films from HMDSO/O2 Plasmas”, Plasma Process. Polym. 3, pp.276–287, 2006.
[87]M.R. Alexander, et al., Appl. Surf. Sci. 137, pp.179, 1999.
[88]A. Barranco, et al., Surf. Coat. Technol. 180–81, pp.244, 2004.
[89]M.R. Alexander, F.R. Jones, R.D. Short, J. Phys. Chem., B 101, pp.3614, 1997.
[90]A. Gru¨niger, A. Bieder, A. Sonnenfeld, “Influence of film structure and composition on diffusion barrier performance of SiO x thin films deposited by PECVD”, Surface & Coatings Technol., 200, pp.564 – 4571, 2006.
[91]Ravi R. Pandey, Marshal Dhayal1, “Using Nano-Arrayed Structures in Sol-Gel Derived Mn2+ Doped TiO2 for High Sensitivity Urea Biosensor”, Journal of Biosensors & Bioelectronics, Volume 1• Issue 1•1000101.
[92]M. Vila, J. A. Martin-Gago, A. Munoz-Martin, C. Prieto, P. Miranzo, M.I. Osendi, J. Garcia-Lopez, and M. A. Respaldiza, “Compositional characterization of silicon nitride thin films prepared by RF-sputtering”, Vaccum, 67, pp.513, 2002.
[93]J.T. Mayer, U. Diebold, T.E. Madey, E. Garfunkel, “Titanium and reduced titania overlayers on titanium dioxide(110)”, Journal of Electron Spectroscopy and Related Phenomena, 73, pp.1-11, 1995.
[94]A. S. da Silva Sobrinho, N. Schuhler, J. E. Klemberg-Sapieha, and M. R. Wertheimer, “Plasma-deposited silicon oxide and silicon nitride films on poly(ethylene terephthalate): A multitechnique study of the interphase regions”, J. Vac. Sci. Technol. A, 16, pp.2021, 1998. |