利用VUB法分析自然邊界條件與材料加工硬化對圓環鍛粗的效應

以作者查詢圖書館館藏

、以作者查詢臺灣博碩士

、以作者查詢全國書目

、勘誤回報

、線上人數：18

、訪客IP：18.188.119.67

姓名

鞠傳隆(CHUAN-LUNG CHU) 查詢紙本館藏

畢業系所

機械工程學系

論文名稱

利用VUB法分析自然邊界條件與材料加工硬化對圓環鍛粗的效應

相關論文

★ 中尺寸LED背光模組之實驗研究	★ 利用有限元素法與反應曲面法探討金屬成型問題之最佳化設計-行星路徑旋轉鍛造傘齒輪為例
★ 以反應曲面法進行行動電話卡勾之最佳化設計	★ 以微分式內涵塑性理論分析材料受軸向循環負載之塑性行為
★ A1070在累進式背擠製下的機械性質與微結構之研究	★ 超音波輔助沖壓加工之應用-剪切、引伸與等通彎角擠製
★ 應用多體動力學於具循環氣體負載之迴轉式壓縮機振動預測模型建立	★ 以有限元素法與反應曲面法分析螺旋傘齒輪之旋轉鍛造最佳化設計
★ 超音波振動輔助鋁合金6061及低碳鋼S15C拉伸試驗之研究	★ 旋轉鍛造螺旋齒輪製程分析
★ 等通道扭轉彎角擠製之有限元素法及反應曲面法分析	★ 以有限元素法與反應曲面法分析增量式板金成形
★ 以有限元素法與反應曲面法分析螺旋傘齒輪之雙錐輥旋轉鍛造最佳化設計	★ 以有限元素法與反應曲面法分析兩點增量成形
★ 引伸成形加工問題之有限元素分析	★ 應用流函數法分析軸對稱熱擠製加工問題

檔案

[Endnote RIS 格式]

[Bibtex 格式]

[相關文章]

[文章引用]

[完整記錄]

[館藏目錄]

[檢視]

[下載]

本電子論文使用權限為同意立即開放。
已達開放權限電子全文僅授權使用者為學術研究之目的，進行個人非營利性質之檢索、閱讀、列印。
請遵守中華民國著作權法之相關規定，切勿任意重製、散佈、改作、轉貼、播送，以免觸法。

摘要(中)

本文在於延伸變分上界限法(VUB)的應用性，進一步考慮同時滿足自然邊界條件（即摩擦應力條件）及材料加工硬化條件下，利用變分的方法最小化上界限能量方程式求解圓盤及圓環鍛粗加工問題。根據上述方法所獲得理論計值，除以圓環及圓盤鍛粗的實驗結果做驗證外，亦探討加工因素，如胚料與模具邊界的摩擦條件、半高度縮減率對圓盤、圓環鍛粗加工速度場、塑性變形場及等效應變場的影響。結果證實，同時考慮自然邊界條件及材料加工硬化條件下的UB法其預測鍛粗變形行為的能力的確是最好的。

摘要(英)

This article is to extend the applicability of the variational upper-bound method for the problem of upset forging of ring and cylinder by satisfying the natural boundary conditions (ie, the friction stress conditions) and accounting for material work-hardening characteristics. variational upper-bound solution can be determined by minimizing the upper-bound energy equation. Based on the above theoretical prediction, it is not only to verify by the experimental results of the ring and cylinder upset forging, but also to discuss the processing factors, such as the boundary friction conditions between the material and the mold, the half-height reduction rate of the disk and cylinder upsetting to affect the velocity field, the plastic deformation field and the equivalent strain field. The results confirm that taking into account the natural boundary conditions and material hardening characteristics of upper-bound method forecast upset forging deformation behavior is indeed the best.

關鍵字(中)

★ 圓環鍛粗
★ 變分上界限法
★ 材料加工硬化
★ 自然邊界條件

關鍵字(英)

★ variational upper-bound method
★ natural boundary condition
★ material work-hardening
★ upset forging

論文目次

摘要 i
ABSTRACT ii
誌謝 iii
目錄 iv
表目錄 vii
圖目錄 viii
符號索引 xiv
第一章緒論 1
1-1 前言 1
1-2 文獻回顧 2
1-3 研究動機及方法 6
1-4 論文架構 7
第二章基本理論介紹 8
2-1 上界限法原理 8
2-2 流函數理論 10
2-3 應變率場關係式推導 14
第三章圓環鍛粗加工之分析 16
3-1 問題定義 16
3-2 基本假設 17
3-3 速度場的性質 17
3-4 上界限成形功率消耗 18
3-4-1 塑性變形區的功率消耗 19
3-4-2 摩擦介面的功率消耗 19
3-4-3 圓環鍛粗加工總功率消耗 20
3-5 平衡方程式及自然邊界條件 21
3-6 動可容速度場 25
3-6-1 流函數的模式 25
3-6-2 速度場的建立 26
3-6-3 應變率場的建立 26
3-7 變分上界限解 27
第四章結果與討論 29
4-1 實驗驗證 30
(一) 校正曲線的實驗驗證 30
(二) 圓盤、圓柱桶脹的實驗驗證 30
(三) 圓環桶脹的實驗驗證 32
(四) 圓盤成形負荷的實驗驗證 33
4-2 理論計值的討論 33
(一) 速度場的比較 33
(二) 等效塑性應變場的比較 34
(三) 摩擦條件與半高縮減率對變形場的影響 34
第五章結論與建議 37
5-1 結論 37
5-2 建議 38
參考文獻 97
附錄A 變分的推導 102
附錄B 換算 116

參考文獻

[1] Male, A. T. and Cockcroft, M. G., "A Method for the Determination of the Coefficient of Friction of Metals Under Conditions of Bulk Plastic Deformation", J. of the Inst. of Metals, Vol. 93, (1965), pp. 38-46.
[2] Saida, Y., Lee, C. H. and Kobayashi, S., "Some Aspects of Friction in Forging Problems", ⅡInter-American Conference on Mater. Technol., Mexico City, (1970), pp. 308.
[3] Avitzur, B., "Strain-Hardening and Strain-Rate Effects in Plastic Flow Through Conical Converging Dies", Journal of Engineering for Industry, Trans. ASME, Vol. 89, (1967), pp. 556-562.
[4] Male, A. T. and Depierre, V., "The Validity of Mathematical Solutions for Determining Friction from the Ring Compression Test", Journal of Lubrication Technology, (1970), pp. 389-397.
[5] Lee, C. H. and Altan, T., "Influence of Flow Stress and Friction upon Metal Flow in Upset Forging of Rings and Cylinders", Journal of Engineering for Industry, Trans. ASME, Vo1. 94, (1972), pp. 775-782.
[6] Nagpal, V., Lahoti, G. D. and Altan, T., "A Numerical Method For Simutaneous Prediction of Metal Flow and Temperatures in Upset Forging of Rings", Journal of Engineering for Industry, Trans. ASME, (1978), pp. 413-420.
[7] Cho, N. S. and Yang, D. Y., "Hydrofilm Extrusion of Tubes through Optimized Curved Dies", Journal of Engineering for Industry, Trans. ASME, Vol. 105, (1983), pp. 243-250.
[8] Yang, D. Y. and Kin, J. H., "An Analysis for three-dimensional Upset forging of Elliptical Disk", International Journal of Machine Tool Design and Research, (1986), pp. 147-156.
[9] Hsiang, S. H. and Huang, T. F., "Analysis of Deformation Behaviours in Upsetting Processes", Proceedings of the 8th National Conference on Mechanical Engineering The Chinese Society of Mechanical Engineers, (1991), pp. 887-894.
[10] Yeh, W. C. and Yang, Y. S., "A Variational Upper-Bound Method for Plane Strain Problems", Journal of Manufacturing Science and Technology, Trans. ASME, Vol. 118, (1996), pp. 301-309.
[11] Choi, J. C. and Choi, Y. and Tak, S. J., "The forging of helical gears (I)：experiments and upper-bound analysis", Int. J. Mesh. Sci., Vol. 40, (1998), No. 4, pp. 325-337.
[12] Chin-Tarn Kwan, "A generalized velocity field for axisymmetric tube drawing through an arbitrarily curved die with an arbitrarily curved plug", Journal of Materials Processing Technology, Vol. 122, (2002), pp. 213-219.
[13] Jon Alkorta and Javier Gil Sevillano, "A comparison of FEM and upper-bound type analysis of equal-channel angular pressing (ECAP)", Journal of Materials Processing Technology, Vol. 141, (2003), pp. 313–318.
[14] Yeh, W. C. and Wu, M. C., "A variational upper-bound method for analysis of upset forging of rings", Journal of Manufacturing Science and Technology, Vol. 170, (2005), pp. 392-402.
[15] Wu, M. C. and Yeh, W. C., "Effect of natural boundary conditions on the upper-bound analysis of upset forging of ring and disks", Materials and Design, Vol. 28, (2007), pp. 1245-1256.
[16] Yeh, W. C. and Wu, M. C., "Effect of natural boundary condition and the neutral surface of nonlinear type on the upper-bound solution to upset forging of rings using a variational approach", Mechanics of Materials, Vol. 40, (2008), pp. 427-445.
[17] Yeh, W. C. and Wu, M. C. and Hong J. J., "A general upper-bound formulation of stream function of upset forging of ring using a variational approach", Materials Science and Engineering B, Vol. 172, (2010), pp. 55-67.
[18] Haghighat, H. and Asgari, G. R., "A generalized spherical velocity field for bi-metallic tube extrusion through dies of any shape", International Journal of Mechanical Sciences, vol. 53, (2011), pp. 248-253.
[19] Sohrabpour, S. and Shabaik, A. H. and Thomsen, E.G., "Local Friction Coefficients in Axisymmetric Extrusions of Aluminum", Journal of Engineering for Industry, ASME, pp 461-468, 1970.
[20] Sortain, H. C. and Kobayashi, S., "An Optimum Die Profile for Axisymmetric Extrusion", International Journal of Machine Tool Design and Research, pp 61-72, 1968.
[21] Fung, Y. C., "Foundations of Solid Mechanics", Prentice-Hall, Englewood Cliffs, New Jersey, (1965), pp. 285.
[22] Prager, W. and Hodge, P. G., "Theory of Perfectly Plastic Solids", John Willey & sons, New York, (1951), pp. 237.
[23] Avitzur, B., "Metal Forming, The Application of Limit Analysis", Marcel Dekker, (1980), pp. 31-32.
[24] Thomsen, E. G., Yang, C. T. and Kobayashi, S., "Mechanics of Plastic Deformation in Metal Forming", MacMillan., New York, (1965), pp. 166-167.
[25] "User’s Manual-Fortran Subroutines for Mathematical Application", IMSL, Inc., (1991), pp.1096-1102.
[26] Hosford, W. F. and Caddell, R. M., "Metal Forming-Mechanics and Metallurgy", Prentice-Hall, Inc., (1983), pp. 150-153.

指導教授

葉維磬(Wei-Ching Yeh)

審核日期

2012-8-10

推文