參考文獻 |
Ahmad, M., Berthoud, G. and Mercier, P, 2009, “General characteristics of two- phase flow distribution in a compact heat exchanger,” International Journal of Heat and Mass Transfer, Vol. 52, pp. 442- 450.
Asano, H. Takenaka, N. and Fujii, T., 2004, “Flow characteristics of gas- liquid two- phase flow in plate heat exchanger (Visualization and void fraction measurement by neutron radiography),” Experimental Thermal and Fluid Science, Vol. 28, pp. 223- 230.
Asano, H. Takenaka, N., Wakabayashi, T. and Fujii, T., 2005, “Visualization and void fraction distribution of downward Gas- liquid two- phase flow in a plate heat exchanger by neutron radiography,” Nuclear Instruments and Methods in Physics Research A, Vol. 542, pp. 154- 160.
Freund, S., Kabelac, S., 2010, “Investigation of local heat transfer coefficients in plate heat exchangers with temperature oscillation IR thermograghy and CFD,” International Journal of Heat and Mass Transfer, Vol. 53, pp. 3764- 3781.
Focke, W. W. and Knibbe P. G., 1984, “Flow visualization in parallel plate ducts with corrugated walls,” CSIR Report CENG M-519.
Focke, W. W. and Knibbe P. G., 1986, “Flow visualization in parallel- plate ducts with corrugated walls,” Journal of Fluid Mechanics, Vol. 165, pp. 73- 77.
61
Gherasim, I., Galanis, N., Nguyen, C. T., 2011, “Effects of smooth longitudinal passages and port configuration on the flow and thermal fields in a plate heat exchanger,” Applied Thermal Engineering, Vol. 31, pp.4113- 4124.
Giovanni, A. Longo, Andrea Gasparella, 2007, “HFC-410A vaporization inside a commercial brazed plate heat exchanger,” Experimental Thermal and Fluid Science, Vol. 32, pp. 107- 116.
Gradeck, M. and Lebouche, M, 2000, “Two-phase gas-liquid flow in horizontal corrugated channels,” International Journal of Multiphase Flow, Vol. 26, pp. 435- 443.
Gschwind, P., Gaiser, G., Zimmerer, C. and Kottke, V., 2001, “Transport phenomena in micro heat exchangers with corrugated walls,” Microscale Thermophysical Engineering, Vol. 5, pp. 285- 292.
Holman, J. P, 2001, “Experimental Methods For Engineers” , McGraw-Hill, Singapore, pp. 51- 60.
Jain, S., Joshi, A. and Bansal, P. K., 2007, “A new approach to numerical simulation of small sized plate heat exchangers with chevron plates,” Journal of Heat Transfer, Vol. 129, pp. 291- 297.
Kanaris, A. G., Mouza, A. A., Paras S. V., 2006, “Flow and Heat Transfer Prediction in a Corrugated Plate Heat Exchanger using a CFD Code,” Chemical Engineering and Technology, Vol. 29, No. 8, pp. 923- 930.
Kedzierski, M. A., 1997, “Effect of inclination on the performance of a
compact brazed plate condenser and evaporator,” Heat Transfer
Engineering, Vol. 18, No. 3, pp. 25- 38. 62

Lozano, A., Barreras, F., Fueyo, N., and Santodomingo, S., 2008, “The flow in an oil/water plate heat exchanger for the automotive industry,” Applied Thermal Engineering, Vol. 28, pp. 1109- 1117.
Marchitto, A., Devia, F., Fossa, M. and Guglielmini, G., 2008, “Experiments on two-phase flow distribution inside parallel channels of compact heat exchangers,” International Journal of Multiphase Flow, Vol. 34, pp. 128- 114.
Shah, R. K., 1990, “Assessment of Modified Plot Techniques for Obtaining Heat Exchanger Design Data,” Heat Transfer, Vol. 5, pp. 51- 56.
Shiomi, Y., Nakanishi, S. and Uehara, T., 2004, “Characteristics of two-phase flow in a channel formed by chevron type plates,” Experimental Thermal and Fluid Science, Vol. 28, pp. 231- 235.
Thonon, B., Vidil, R. and Marvillet, C., 1995, “Recent research and developments and plate heat exchangers,” Enhanced Heat Transfer, Vol. 2, pp. 149- 155.
Tribbe, C., and Muller- Steinhagen, H. M., 2001, “Gas/liquid flow in plate-and-frame heat exchangers-Part II: two phase multiplier and flow pattern analysis,” Heat Transfer Engineering, Vol. 22, pp. 12- 21.
Tsai, Y. C., Liu, F. B. and Shen, P. T., 2009, “Investigations of the pressure drop and flow distribution in a chevron-type plate heat exchanger,” International Communications in Heat and Mass Transfer, Vol. 36, pp. 574- 578.
63
Vist, S. and Pettersen, J., 2004, “Two-phase flow distribution in compact heat exchanger manifolds,” Experimental Thermal and Fluid Science, Vol. 28, pp. 209- 215.
Vlasogiannis, P., Karagiannis, G. Argyropoulos, P., and Bontozoglou, V., 2002, “Air- water two-phase flow and heat transfer in a plate heat exchanger,” International Journal of Multiphase Flow, Vol. 28, pp. 757- 772.
王啟川,2007,熱交換器設計,五南圖書出版有限公司,臺北北市。 朱彥丞,2012,板式熱交換器內部之兩兩相分佈模擬與流流動分佈不不均勻
性分析,國立立中央大學機械工程研究所碩士論論文,中壢。 林林立立偉,2004,水對冷冷媒 R22 在板式熱交換器內之性能測試分析,
國立立中央大學機械工程研究所碩士論論文,中壢。 孟繁宇,2011,水-空氣在板式熱交換器內的流流動觀察,國立立中央大
學機械工程研究所碩士論論文,中壢。
翁嘉鴻,2002,水對水板式熱交換器性能測試分析,國立立中央大學機 械工程研究所碩士論論文,中壢。
曾廣彬,2010,板式熱交換器支流流場模擬與流流動分佈佈均勻態分析, 國立立中央大學機械工程研究所碩士論論文,中壢。 |