參考文獻 |
[BAR]: B. Baradarani and R. Raiszadeh,“ Precipitation hardening of cast Zr-containing A356 aluminium alloy,” Materials and Design, Vol. 32 (2011) pp. 935-940.
[BAC]: L. Backerud, G. Chai and J. Tamminen,“ Solidification Cha- racteristics of Aluminum Alloys, Foundry Alloys, AFS, Vol. 2 (1990) pp. 143.
[BEL]: N. A. Belov and T. A. Kurdyumova,“ The Al-Si-Fe-Be phase diagram and the possibility of ferrous phase neutralization in silumins,” Russ. Metall. (Engl. Transl), Vol. 2 (1989) pp. 207-212.
[BIR]: Y. Birol,“ Response to artificial ageing of dendritic and globular Al-7Si-Mg alloys,” Journal of Alloys and Compounds, Vol. 484 (2009) pp. 164-167.
[BUA]: M. M. Buarzaiga and S. J. Thorpe, “Corrosion behavior of as-cast, silicon carbide particulate-aluminum alloy metal-matrix composites,” Corrosion, Vol. 50 (1994) pp. 176-185.
[COU]: A. Couture,“ Iron in aluminum casting alloys literature Survey,” AFS international cast metals, Vol. 6 (1981) pp. 9-17.
[DAV1]: V. G. Davydov , T. D. Rostova, V. V. Zakharov, Y. A. Filatov and V. I. Yelagin,“ Scientific principles of making an alloying addition of scandium to aluminum alloys,” Materials Science and Engineering A, Vol. 280 (2000) pp. 30-36.
[DAV2]: J. R. Davis, ASM Specialty Handbook Aluminum and Aluminum Alloys, ASM international materials park, Ohio (1994) p. 31.
[DAV3]: J. R. Davis, ASM Specialty Handbook Aluminum and Aluminum Alloys, ASM international materials park, Ohio (1994) p. 43.
[DRO]: M. Drouzy, S. Jacob and M. Richard, “Interpretation of tensile results by means of quality index and probable yield strength,” AFS Int. Cast Metal (1980) pp. 43-50.
[GAB]: G. M. Novotny and A. J. Ardell,“ Precipitation of Al3Sc in binary Al–Sc alloys,” Materials Science and Engineering A, Vol. 318 (2001) pp. 144–154.
[GRU1]: J. E. Gruzleski, B. M. Closset, The Treatment of Liquid Aluminum-Silicon Alloys (1990) p. 14.
[GRU2]: J. E. Gruzleski, B. M. Closset, The Treatment of Liquid Aluminum-Silicon Alloys (1990) p. 16.
[GRU3]: J. E. Gruzleski, B. M. Closset, The Treatment of Liquid Aluminum-Silicon Alloys (1990) p. 80.
[GIL1]: J. G. Kaufman and E. L. Rooy,“ Aluminum alloy casting properties, processes, and applications,” AFS&ASM (2004) p. 15.
[GIL2]: J. G. Kaufman and E. L. Rooy,“ Aluminum alloy casting properties, processes, and applications,” AFS&ASM (2004) p. 16.
[GRA]: D. A. Granger, R. R. Sawtell and M. M. Kersker,“ Effect of beryllium on the properties of A357.0 castings”, AFS Trans., Vol. 92 (1984) pp. 579-586.
[GOW]: S. Gowri,“ Extent of depression in eutectic temperature at two levels of silicon in Al-Si-Mg alloys processed at different cooling rates,” Metallurgical and materials transaction A, Vol. 24 (1993) pp. 2810-2812.
[HAN]: N. Handisk, J. E. Gruzleski and D. Argo, “ Sodium, strontium, and antimony interactions during modification of AS7G03(A356) alloys,” AFS Trans., Vol. 95 (1987) pp. 31-38.
[HEN]: L. Hengcheng, S. Yu and S. Guoxiong,“ Restraining effect of strontium on the crystallization of Mg2Si phase during solidification in Al-Si-Mg casting alloys and mechanisms,” Materials Science and Engineering A, Vol. 358 (2003) pp. 164-170.
[JAN]: P. Janason,“ Thermal fatigue of cylinder head alloys,” AFS Trans., Vol. 100 (1992) pp. 601-607.
[JOH]: J. A. Francis and G. M. D. Cantin,“ The role of defects in the fracture of an Al–Si–Mg cast alloy,” Materials Science and Engineering A, Vol. 407 (2005) pp. 322–329.
[KRI]: K. K. Chawla and M. A. Meyers,“ Mechanical behavior of materials,” Cambridge (2008), p.369.
[KIM]: M. Kim, Y. Hong and H. Cho,“ The Effects of Sc on the Microstructure and Mechanical Properties of Hypo-Eutectic Al-Si Alloys,” Metals and materials International, Vol. 10, No. 6 (2004) pp. 513-520.
[LAT]: S. Lathabai and P. G. Lloyd,“ The effect of scandium on the microstructure, mechanical properties and weldability of a cast Al–Mg alloy,” Acta Materialia , Vol. 50 (2002) pp. 4275-4292.
[LEV]: P. S. Levy, H. D. Roth, P. M. Hwang and T. E. Powers.,“ Beryllium and lung cancer: a reanalysis of a NIOSH cohort mortality study. Inhal Toxicol. (2002) pp. 14-15.
[Li]: R .X. Li, R. D. Li, Y. H. Zhao, L. Z. He, C. X. Li, H. R. Guan and Z. Q. Hu,“ Age-hardening behavior of cast Al–Si base alloy,” Materials Letters , Vol. 58 (2004) pp. 2096-2101.
[LOH]: A. K. Lohar, B. Mondal, D. Rafaja, V. Klemm and S. C. Panigrahi,“ Microstructural investigations on as-cast and annealed Al-Sc and Al-Sc-Zr alloys,” Materials chracterizaton, Vol. 60 (2009) pp. 1387-1394.
[LEN]: L. Bäckerud, G. Chao and J. Tamminen,“ Solidification characteristics of aluminum alloys,” AFS/Skanaluminum (1990) p.136 .
[MAR]: E. A. Marquis and D. N. Seidman,“ Nanoscale structural evolution of Al3Sc precipitation in Al(Sc) alloys, Acta mater., Vol. 49 (2001) pp.1909-1919.
[MON]: L. F Mondolo,” Aluminum alloys: structure and properties,” London, Butter wordths and Co., Ltd. (1976) pp.534-536.
[MOU]: M. A. Moustafa,“ Effect of iron content on the formation of β- Al5FeSi and porosity in Al–Si eutectic alloys,” jornal of processing technology, Vol. 209 (2009) pp. 605-610.
[MUN]: M. A. Muñoz-Morris, C. G. Oca, G. Gonzalez-Doncel and D. G. Morris,“ Microstructural evolution of dilute Al–Mg alloys during processing by equal channel angular pressing and during subsequent annealing,” Materials Science and Engineering A, Vol. 375-377 (2004) pp. 853 -856.
[MUR]: S. Murali, K. S. Raman and K. S. S. Murthy,“ Effect of trace additions (Be, Cr, Mn and Co) on the mechanical properties and fracture toughness of Fe-containing Al-7Si-0.3Mg Alloy,” Cast Metals, Vol. 6 (1994) pp. 189-198.
[MUR2]: S.Muali, T. N. Gurn, D. H. Sastry, K. S. Raman and K. S. S. Murthy,“ Crystal structure of β–Al5FeSi and (Be-Fe)-BeSiFe2Al8 phases,” Scripta metallurgica et Materialia, Vol. 31, No. 3 (1994) pp. 261-271
[MUR3]: S. Murali, K. S. Raman and K. S. S. Murthy,“ The formation of β-FeSiA15 and Be-Fe phases in A1-7Si-0.3Mg alloy containing Be,” Materials Science and Engineering A, Vol.190 (1995) pp. 165-172.
[MUL]: M. H. Mulazimoglu, R. A. L. Drew and J. E. Druzleski, Electrical conductivity of aluminum-rich Al-Si-Mg alloys, Journal of materials science letters,Vol. 8 (1989) pp. 297-300.
[NOR]: A. F. Norman, P. B. Prangrell and R. S. Mcemen,“ The solidification behavior of dilute aluminum-scandium alloys,” Acta mater., Vol.46 (1998) pp. 5715-5732.
[NOV]: G. M. Novotny , A. J. Ardell,“ Precipitation of Al3Sc in binary Al–Sc alloys,” Materials Science and Engineering A, Vol. 318 (2001) pp. 144-154.
[OSA]: K. Osamura, N. Otsuka and Y. Murakami,“ Resistivity maximum during guinier-preston zone formation in an Al-4 wt% Cu alloys, “ Philosphical Magazine Letters,” Vol. 45 (1982) pp. 583-599.
[OCE]: V. Ocenasek, M. Slamova,“ Resistance to recrystallization due to Sc and Zr addition to Al–Mg alloys,” Materials Characterization, Vol. 47 (2001) pp. 157– 162.
[PUR1]: W. Prukkanona, N. Srisukhum-bowornchaia and C. Limmaneevichitr,” Modification of hypoeutectic Al–Si alloys with scandium,” Journal of Alloys and Compounds, Vol. 477 (2009) pp. 454- 460.
[PUR2]: W. Prukkanona, N. Srisukhum-bowornchaia and C. Limmaneevichitr,” Influence of Sc modification on the fluidity of an A356 aluminum alloy,” Materials Science and Engineering A, Vol. 487 (2009) pp. 453-457.
[REI]: W. Reif , J. Dutkiewicz , R. Ciach , S. Yu and J. KroІ,“ Effect of ageing on the evolution of precipitates in AlSiCuMg alloys,” Materials Science and Engineering A, Vol. 234-236 (1997) pp. 165-168.
[REE]: R. E. Reed-Hill, Reza Abbaschian, Physical metallurgy principles,” Third edition, PWS publishing company, p. 533.
[ROY]: J. Røyset and N. Ryum,” Scandium in aluminium alloys,” International materials review, Vol. 50 (2005) No.1
[RIO]: G. Riontino and S. Abis“ Scanning electrical resistivity (SER) study of phase transformations in an Al-Cu alloy,” Philosphical Magazine Letters, Vol. 64 (1991) pp. 447-461.
[SEI]: D. N. Seidman, E. A. Marquis and D. C. Dunand,“ Precipitation strengthening at ambient and elevated temperatures of heat-treatable Al(Sc) alloys,” Acta materialia, Vol. 50 (2002) pp. 4021- 4035.
[SEI]: S. Seifeddine, S. Johansson and I. L. Svensson,” The influence of cooling rate and manganese content on the β-Al5FeSi phase formation and mechanical properties of Al–Si-based alloys,” Materials Science and Engineering A, Vol. 490 (2008) pp. 385-390.
[SKI]: P. Skierpe,“ Intermetallic phases formed during DC-casting of an Al-0.25%Fe-0.13%Si alloy,” Metallurgical Transactions A-physical metallurgical and materials science, Vol. 18 (1987) pp. 189-200.
[SIM]: W. F. Smith and J. Hashemi,“ Foundation of materials science and engineering, McGraw Hill, Fourth edition (2006) p. 415.
[TAD]: T. Aiura, N. Sugawara, Y. Miura,“ The effect of scandium on the as-homogenized microstructure of 5083 alloy for extrusion,” Materials Science and Engineering A, Vol. 280 (2000) pp. 139- 145.
[TAN1]: Y. H. Tan, S. L. Lee and Y. L. Lin, “Effects of Be and Fe content on plane strain fracture toughness in A357 alloys,” Metallurgical Transactions A-physical metallurgical and materials science, Vol. 26 (1995) pp. 2937-2945.
[TAN2]: Y. H. Tan, S. L. Lee and Y. L. Lin,“ Effects of Be and Fe additions on the microstructure and mechanical properties of A357.0 alloys,” Metallurgical Transactions A-physical metallurgical and materials science, Vol. 26 (1995) pp.1195-1205.
[WAN1]: P.S Wang, S-L. Lee ,C.Y. Yang and J.-C. Lin,” Effect of beryllium an d non-equilibrium heat treatment on the mechanical properties of B319.0 alloy with 1.0%Fe,“ Materials Science and Technology, Vol. 20 (2004) pp. 195-202.
[WAN2]: Y. Wang and Y. Xiong,” Effects of beryllium in Al–Si–Mg–Ti cast alloy,“ Materials Science and Engineering A, Vol. 280 (2000) pp. 124–127
[WIL]: D. B. Williams and C. B. Carter,“ Transmission Electron Microscopy,” A Textbook for Materials Science, Plenum Pres, New York (1996) pp. 9-11.
[WIK]: K. G. Wikle,“ Improving aluminum casting with beryllium,” AFS Trans., Vol. 119 (1978) pp. 513-518.
[YAN]: C. Y. Yang, S. L. Lee, C. k. Lee and J. C. Lin,“ Effects of Be and Fe on the mechanical and corrosion behaviors of A357alloys,” Materials Chemistry and Physics, Vol. 93 (2005), pp. 412- 495.
[Yu]: K. Yu, W. Li, S. Li and J. Zhao,“ Mechanical properties and microstructure of aluminum alloy 2618 with Al3(Sc, Zr) phases,” Materials Science and Engineering A, Vol. 38 (2004) pp. 88-93.
[YUA]: W. Yuan, Z. Liang,“ Effect of Zr addition on properties of Al–Mg–Si aluminum alloy used for all aluminum alloy conductor,” Materials and Design,Vol. 32 (2011) pp. 4195-4200.
[ZHO]: Z. Chen, Y. Lei, H. Zhang,“ Structure and properties of nanostructured A357 alloy produced by melt spinning compared with direct chill ingot,” Journal of Alloys and Compounds , Vol. 509 (2011) pp. 7473–7477.
|