參考文獻 |
[1.1] Photon International, http:/www.photon-magazine.com/
[1.2] National Renewable Energy Laboratory (NREL), http://www.nrel.gov/
[1.3] R. Swanson, “Approaching the 29% limit efficiency of silicon solar cells”, Proceedings of the 3th IEEE photovoltaic specialist conference (IEEE, Florida, 2005), p.889.
[1.4] R. C. Chittick, J. H. Alexander, H. F. Sterling, “Preparation and properties of amorphous silicon”, J. Electrochem. Soc. 116 (1969) 77-81.
[1.5] D. E. Carlson and C. R. Wronski, “Amorphous silicon solar cells”, Appl. Phys. Lett. 28 (1976) 671-673.
[1.6] D. E. Carlson, C. R. Wronski, A. Triano, R. E. Daniel, “Solar cells using schottky barriers on amorphous silicon”, Proceedings of the 22nd IEEE photovoltaic specialist conference (IEEE, Baton Rouge, 1976), p.893-895.
[1.7] S. Ahn, S. Lee and H. Lee, "Toward commercialization of triple-junction thin-film silicon solar panel with >12% efficiency", Proceedings of the 27th European Photovoltaic Solar Energy Conference, Frankfurt, 2012.
[1.8] D. L. Staebler and C. R. Wronski, "Reversible conductivity changes in discharge-produced amorphous Si", Appl. Phys. Lett. 31 (1977) 292-294.
[1.9] J. I. Pankove and J. E. Berkeyheise, “Light-induced radiative recombination centers in hydrogenated amorphous silicon”, Appl. Phys. Lett. 37 (1980) 705-707.
[1.10] M. Stutzmann, W. B. Jackson and C. C. Tsai, “Light-induced metastable defects in hydrogenated amorphous silicon: A systematic study”, Phys. Rev. B 32 (1985) 23-47.
[1.11] J. A. Reimer, R. W. Vaughan and J. C. Knight, “Proton magnetic resonance spectra of plasma-deposited amorphous Si:H films”, Phys. Rev. Lett. 44 (1980) 193-196.
[1.12] D. E. Carlson, “Hydrogenated microvoids and light-induced degradation of amorphous silicon solar cell”, Appl. Phys. A. 41 (1986) 305-309.
[1.13] E. Bhattacharya and A. H. Mahan, “Microstructure and the light-induced metastability in hydrogenated amorphous silicon”, Appl. Phys. Lett. 52 (1988) 1587-1589.
[1.14] A. Matsuda, “Formation kinetics and control of microcrystallite in μc-Si:H from glow discharge plasma”, J. Non-Cryst. Solids. 59 (1983) 767-774.
[1.15] C. Wang and G. Lucovsky, “Intrinsic microcrystalline silicon deposited by remote PECVD: A new thin-film photovoltaic material”, Proceedings of the 21st IEEE photovoltaic specialist conference (IEEE, Florida, 1990), p.1614-1618.
[1.16] R. Frerichs, “The photo-conductivity of incomplete phosphors”, Phys. Rev. 72 (1947) 594-601.
[1.17] D. A. Jenny and R. B. Bube, “Semiconducting cadmium telluride”, Phys. Rev. 96 (1954) 1190-1191.
[1.18] F. Krüger and D. D. Nobel, J. Electron. 1 (1955) 190-202.
[1.19] J. J. Loferski, “Theoretical considerations governing the choice of the optimum semiconductor for photovoltaic solar energy conversion”, J. Appl. Phys. 27 (1956) 777-784.
[1.20] P. Rappaport, “The photovoltaic effect and its utilization”, RCA Rev. 20 (1959) 373-397.
[1.21] R. Muller and R. Zuleeg, “Vapor‐deposited, thin‐film heterojunction diodes”, J. Appl. Phys. 35 (1964) 1550-1556.
[1.22] K. Yamaguchi, H. Matsumoto, N. Nakayama and S. Ikegami, “CdS-CdTe solar cell prepared by vapor phase epitaxy”, Jpn. J. Appl. Phys. 16 (1977) 1203-1211.
[1.23] H. Hahn, G. Frank, W. Klingler, A. Meyer and G. Störger, “Über einige ternäre chalkogenide mit chalcopyritestruktur“, Z. Anorg. U. Allg. Chemie 271 (1953) 153.
[1.24] S. Wagner, J. L. Shay, P. Migliorato and H. M. Kasper, “CuInSe2/CdS heterojunction photovoltaic detectors”, Appl. Phys. Lett. 25 (1974) 434-435.
[1.25] L. L. Kazmerski, F. R. White and G. K. Morgan, “Thin‐film CuInSe2/CdS heterojunction solar cells”, Appl. Phys. Lett. 29 (1976) 268-269.
[1.26] R. A. Mickelsen and W. S. Chen, “High photocurrent polycrystalline thin‐film CdS/CuInSe2 solar cell”, Appl. Phys. Lett. 36 (1980) 371.
[1.27] R. A. Mickelsen and W. S. Chen, “Development of a 9.4% efficient thin-film CuInSe2/CdS solar cell”, Proceedings of the 15th IEEE photovoltaic specialist conference (IEEE, Orlando, 1981), p.800-904.
[1.28] K. C. Mitchell, J. Ermer, and D. Pier, “Single and Tandem Junction CuInSe2 Cell and Module Technology”, Proceedings of the 20th IEEE Photovoltaic Specialists Conference (IEEE, LasVegas, 1988), p.1384-1389.
[1.29] W. S. Chen, M. J. Stewart, B. J. Stanbery, W. E. Devaney and R. A. Mickelsen, “Development of thin film polycrystalline CuIn1-xGaxSe2 solar cells”, Proceedings of the 19th IEEE Photovoltaic Specialists Conference (IEEE, New Orleans 1987), p.1445-1447.
[1.30] T. Walter, A. Content, K. O. Velthaus and H. W. Schock, “Solar cells based on CuIn(Se, S)2”, Sol. Energy Mater. Sol. Cells 26 (1992) 357-368.
[1.31] A. M. Gabor, J. R. Tuttle, D. S. Albin, M. A. Contreras, R. Noufi and A. M. Hermann, “High‐efficiency CuInxGa1-xSe2 solar cells made from (Inx,Ga1-x)2Se3 precursor films”, Appl. Phys. Lett. 65 (1994) 198-200.
[1.32] H. J. Moller, “Semiconductors for solar cells”, Boston, London: Artech House, 1993.
[1.33] J. R. Woodyard and G. A. Landis, “Radiation resistance of thin-film solar cells for space photovoltaic power”, Sol. Cells 31 (1991) 297-329.
[1.34] Manz, http://www.manz.com/tw/?welcome
[1.35] Solar Frontier, http://www.solar-frontier.com/eng/
[1.36] TSMC Solar, http://www.tsmc-solar.com/home
[1.37] AxunTek, http://www.axuntek.com/cht/cht.php
[1.38] M. A. Green, K. Emery, Y. Hishikawa, W. Warta and E. D. Dunlop, “Solar cell efficiency tables (version 42)”, Prog. Photovolt: Res. Appl. 21 (2013) 827-837.
[1.39] T. Negami, T. Satoh, Y. Hashimoto, S. Nishwaki, S.-i. Shimakawa and S. Hayashi, “Large-area CIGS absorbers prepared by physical vapor deposition”, Sol. Energy Mater. Sol. Cells 67 (2001) 1-9.
[1.40] K. Ramanathan, M. A. Contreras, C. L. Perkins, S. Asher, F. S. Hasoon, J. Keane, D. Young, W. Metzger, R. Noufi, J. Ward and A. Duda, “Properties of 19.2% efficiency ZnO/CdS/CuInGaSe2 thin-film solar cells”, Prog. Photovolt: Res. Appl. 11 (2003) 225-230.
[1.41] C. Eberspacher, K. Paul and J. Serra, “Non-vacuum processing of CIGS solar cells”, Conference Record of the 29th IEEE: Photovoltaic Specialists Conference (IEEE, New Orleans 2002), p.684-687.
[1.42] D. Lincot, J. F. Guillemoles, S. Taunier, D. Guimard, J. Sicx-Kurdi, A. Chaumont, O. Roussel, O. Ramdani, C. Hubert, J. P. Fauvarque, N. Bodereau, L. Parissi, P. Panheleux, P. Fanouillere, N. Naghavi, P. P. Grand, M. Benfarah, P. Mogensen and O. Kerrec, “Chalcopyrite thin film solar cells by electrodeposition”, Solar Energy 77 (2004) 725-737.
[1.43] D. B. Mitzi, M. Yuan, W. Liu, A. J. Kellock, S. Chey, L. Gignac and A. G. Schrott, “Hydrazine-based deposition route for device-quality CIGS films”, Thin Solid Films 517 (2009) 2158-2162.
[1.44] J. Palm, V. Probst and F. H. Karg, “Second generation CIS solar modules”, Solar Energy 77 (2004) 757-765.
[1.45] A. McEvoy, T. Markvart and L. Castaner, “Practical handbook of photovoltaics: Fundamentals and Applications”, Elsevier, second edition (2012).
[1.46] F. O. Adurodija, J. Song, S. D. Kim, S. H. Kwon, S. K. Kim, K. H. Yoon and B. T. Ahn, “Growth of CuInSe2 thin films by high vapour Se treatment of co-sputtered Cu-In alloy in a graphite container”, Thin Solid Films 338 (1999) 13-19.
[1.47] V. F. Gremenok, E. P. Zaretskaya, V. B. Zalesski, K. Bente, W. Schmitz, R. W. Martin and H. Moller, “Preparation of Cu(In,Ga)Se2 thin film solar cells by two-stage selenization processes using N2 gas”, Sol. Energy Mater. Sol. Cells 89 (2005) 129-137
[1.48] J. H. Schon, V. Alberts and E. Bucher, “Structural and optical characterization of polycrystalline CuInSe2”, Thin Solid Films 301 (1997) 115-121.
[1.49] F. A. Abou-Elfotouh, H. Moutinho, A. Bakry, T. J. Coutts and L. L. Kazmerski, “Characterization of the defect levels in copper indium diselenide”, Solar Cells 30 (1911) 151-160.
[1.50] I. Dirnstorfer, W. Burkhardt, W. Kriegseis, I. O Osterreicher, H. Alves, D. M. Hofmann, O. Ka, A. Polity, B. K. Meyer, D. Braunger, “Annealing studies on CuIn(Ga)Se2: the influence of gallium”, Thin Solid Films 361 (2000) 400-405.
[1.51] S. Shirakata and T. Nakada, “Photoluminescence and time-resolved photoluminescence in Cu(In,Ga)Se2 thin films and solar cells”, Phys. Status Solidi C 6 (2009) 1059-1062.
[1.52] Y.-D. Chung, D.-H. Cho, N.-M. Lee and J. Kim, “Effect of annealing on CdS/Cu(In,Ga)Se2 thin-film solar cells”, Curr. Appl. Phys. 11 (2011) S65-S67.
[1.53] S. Kijma and T. Nakada, “High-temperature degradation mechanism of Cu(In,Ga)Se2-based thin film solar cells”, Appl. Phys. Express 1 (2008) 075002.
[1.54] T. Wada, N. Kohara, S. Nishiwaki and T. Negami, “Characterization of the Cu(In,Ga)Se2 Mo interface in CIGS solar cells”, Thin Solid Films 387 (2001) 118-122.
[1.55] N. Kohara, S. Nishiwaki, Y. Hashimoto, T. Negami, and T. Wada, “Electrical properties of the Cu(In,Ga)Se2/Mo structure”, Sol. Energy Mater. Sol. Cells 67 (2001) 209-215.
[1.56] T. Nakada, D. Iga, H. Ohbo, and A. Kunioka, “Effects of sodium on Cu(In,Ga)Se2-based thin films and solar cells”, J. J. Appl. Phys. 36 (1997) 732-737.
[1.57] X. L. Zhu, Y. Wang, A. Li, L. Zhang and F. Huang, “The effect of N2 gas pressure during the rapid thermal process on the structural and morphological properties of CIGS films”, Adv. Mater. Res. 463 (2012) 614-617.
[1.58] J. Pouzet and J. C. Bernede, “MoSe2 thin films synthesized by solid state reactions between Mo and Se thin films”, Revue Phys. Appl. 25 (1990) 807-815.
[2.1] H. Khatri and S. Marsillac, “The effect of deposition parameters on radiofrequency sputtered molybdenum thin films”, J. Phys.: Condens. Matter, 20 (2008) 055206.
[2.2] F. A. Abou‐Elfotouh, L. L. Kazmerski, R. J. Matson, D. J. Dunlavy and T. J. Coutts, “Studies of the electrical and interface properties of the metal contacts to CuInSe2 single crystals”, J. Vac. Sci. Technol. A 8 (1990) 3251-3254.
[2.3] S. Ashour and S. Alkuhaimi, “Junction formation and characteristics of CdS/CulnSe2/metal interfaces”, Thin Solid Films 226 (1993) 129-134.
[2.4] R. J. Matson, O. Jamjoum, A. D. Buonaquisti, P. E. Russell, L. L. Kazmerski, P. Sheldon and R. K. Ahrenkiel, “Metal contacts to CuInSe2”, Solar Cells 11 (1984) 301-305.
[2.5] E. Moons, T. Engelhard and D. Cahen, “Ohmic contacts to p-CuInSe2 crystals” J. Electron. Mater. 22 (1993) 275-280.
[2.6] 李微,敖建平,何青,劉芳芳,李風岩,李長健,劉雲,《衬底對Cu(In,Ga)Se2薄薄膜织构的影响》,物理學報,56 (2007) 5009-5012.
[2.7] 林威廷,《摻鋁氧化鋅與金屬鉬的製備及特性研究》,長庚大學碩士論文 (2009)
[2.8] M. L. Colaianni, J. G. Chen W. H. Weinberg and J. T. Yates, Jr., “Oxygen on Mo(110): low-temperature adsorption and high-temperature oxidation”, Sur. Sci. 279 (1992) 211-222.
[2.9] L. Assmann, J. C. Bernède, A. Drici, C. Amory, E. Halgand, M. Morsli, “Study of Mo thin films and Mo/CIGS interface properties”, Appl. Sur. Sci. 246 (2005) 159-166.
[2.10] P. E. Russel, O. Jamjoum, R. K. Ahrenkiel, L. L. Kazmerski, R. A. Mickelsen and W. S. Chen, “Properties of the Mo-CuInSe2 interface”, Appl. Phys. Lett., 40 (1982) 995-997.
[2.11] W. N. Sharfarman and J. E. Phillips, “Direct current-voltage measurements of the Mo/CuInSe2 contact on operating solar cells”, Proceeding of the 25th IEEE Photovoltaic Specialists Conference (IEEE, Washington, 1996), p.917-919.
[2.12] S.-Y. Kuo, L.-B. Chang, M.-J. Jeng, W.-T. Lin, Y.-T. Lu and S.-C. Hu, “Effects of growth parameters on surface-morphological, structural, electrical and strain properties of molybdenum films by RF magnetron sputtering”, Mater. Res. Soc. Symp. Proc. 1123 (2009) 1105-1118.
[2.13] S.-Y. Kuo, M.-J. Jeng, L.-B. Chang, W.-T. Lin, S.-C. Hu, Y.-T. Lu, and C.-W. Wu, “Optimization of growth parameters for improved adhesion and electricity of molybdenum films deposited by RF magnetron sputtering”, Proceedings of the 34th IEEE photovoltaic specialist conference (IEEE, Philadelphia, 2009), p.594-596.
[2.14] J. H. Scofield, A. Duda, D. Albin, B. L. Ballard and P. K. Predecki, “Sputtered molybdenum bilayer back contact for copper indium diselenide-based polycrystalline thin-film solar cells”, Thin Solid Films 260 (1995) 26-31.
[2.15] N. G. Dhere, A. A. Kadam, S. S. Kulkarni, S. M. Bet and A. H. Jahagirdar, “Large area CIGS2 thin film solar cells on foils: nucleus of a pilot plant”, Solar Energy 77 (2004) 697-703.
[2.16] M. L. Fearheiley, “The phase relations in the Cu, In Se system and the growth of CuInSe2 single crystals”, Solar cells 16 (1986) 91-100.
[2.17] M. Krejci, “Preparation and characterization of heteroepitaxial CuInxSey layers and Cu(In,Ga)Se2 substrate solar cells”, PhD thesis, ETH Zurich (1999).
[2.18] R. Noufi, R. Axton, C. Herrington and S. K. Deb, “Electronic properties versus composition of thin films of CuInSe2”, Appl. Phys. Lett. 45 (1984) 668-670.
[2.19] J. Nelson, “The physics of solar cells” Imperial College Press. (2003).
[2.20] U. Rau and H. W. Schock, “Electronic properties of Cu(In,Ga)Se2 heterojunction solar cells-recent achievements, current understanding, and future challenges“, Appl. Phys. A69 (1999) 139-146.
[2.21] Q. Cao, O. Gunawan, M. Copel, K. B. Reuter, S. J. Chey, V. R. Deline and D. B. Mitzi, “Defect in Cu(In,Ga)Se2 chalcopyrite semiconductors: a comparative study of material properties, defect state, and photovoltaic performance”, Adv. Energy Mater. 1 (2011) 845-853.
[2.22] J. R. Sites and X. Liu, “Recent efficiency grains for CdTe and CuIn1-xGaxSe2 solar cells: What has chanded?”, Sol. Energy Mater. Sol. Cells 41/42 (1993) 373-379.
[2.23] D. L. Young, J. Keane, A. Duda, J. A M. AbuShama, C. L. Perkins, M. Romero and R. Noufi, “Improved performance in ZnO/CdS/CuGaSe2 thin-film solar cells”, Prog. Photovolt: Res. Appl. 11 (2003) 535-541.
[2.24] K. Yoshino, H. Yokoyama, K. Maeda and T. Ikari, “Crystal growth and photoluminescence of CuInxGa1-xSe2 alloys”, J. Cryst. Growth 211 (2000) 476-479.
[2.25] S. H. Wei, S. B. Zhang and Alex Zunger, “Effect of Ga addition to CuInSe2 on its electronic, structure and defect properties”, Appl. Phys. Lett. 72 (1998) 3199-3201.
[2.26] K. Ramanathan, M. A. Contreras, C. L. Perking, S. Asher, F. S. Hasoon, J. Keane, D. Young, M. Romero, W. Metzger, R. Noufi, J. Word and A. Duda, “Proeprties of 19.2% efficiency ZnO/CdS/CuInGaSe2 thin-film solar cells”, Prog. Photovolt: Res. Appl. 11 (2003) 225-230.
[2.27] A. Rockett, “Performance-limitations in Cu(In,Ga)Se2-based heterojunction solar cells”, Proceedings of the 29th IEEE photovoltaic specialist conference (IEEE, 2003), p.587-591.
[2.28] M. A. Contreras, L. M. Mansfield, B. Egaas, J. Li, M. Romero, R. Noufi, E. Rudiger-Voigt and W. Mannstadt, “Wide bandgap Cu(In,Ga)Se2 solar cells with improved energy conversion efficiency”, Prog. Photovolt: Res. Appl. 20 (2012) 843-850.
[2.29] D. Schmid, M. Ruckh and H. W. Schock, “A comprehensive characterization if the interfaces in Mo/CIS/CdS/ZnO solar cell structures”, Sol. Energy Mater. Sol. Cells 41/42 (1996) 281-294.
[2.30] D. Hariskos, S. Spiering and M. Powalla, ”Buffer layers in Cu(In,Ga)Se2 solar cells and modules”, Thin Solid Films 480-481 (2005) 99-109.
[2.31] National Renewable Energy Laboratory (NREL), http://www.nrel.gov/
[2.32] 中田時夫,《Cd free-高效率CIGS薄膜太陽能電池》,應用物理,74 (2005) 333-337.
[2.33] G. B. Turner, R. J. Schwartz and J. L. Gray, “Band discontinuity and bulk vs. interface recombination in CdS/CuInSe2 solar cells”, Proceedings of the 29th IEEE photovoltaic specialist conference (IEEE, 1988), p.1457-1460.
[2.34] K. A. Jones, “The lattice mismatch between (112) chalcopyrite films and (0001) CdS substrates”, J. Cryst. Growth 47 (1979) 235-244.
[2.35] S. S. Li, B. J. Stanbery, C. H. Huang, C. H. Chang, Y. S. Chang and T. J. Anderson, “Effects of buffer layer processing on CIGS excess carrier lifetime: application of dual-beam optical modulation to process analysis”, Proceedings of the 25th IEEE photovoltaic specialist conference (IEEE, Washington, 1996), p.821-824.
[2.36] 楊錦章,《基礎濺鍍電漿》,電子發展月刊,68 (1983) 13-40.
[2.37] W. R. Grove, “On the electro-chemical polarity of gases”, Philosophical Transactions of the Royal Society 142 (1852) 87-101.
[2.38] 莊達人,《VLSI製造技術》,高立圖書有限公司 (2005).
[2.39] K. Wasa and S. Hayakawa, “Handbook of Sputter Deposition Technology: Principles, Technology, and Applications”, Noyes publications (1992).
[2.40] 田民波,《薄膜技術與薄膜材料》,五南圖書出版股份有限公司 (2007)
[2.41] 李正中,《薄膜光學與鍍膜技術》,第六版,藝軒圖書出版社 (2009)
[2.42] T. Negami, T. Satoh, Y. Hashimoto, S. Nishwaki, S.-i. Shimakawa and S. Hayashi, “Large-area CIGS absorbers prepared by physical vapor deposition”, Sol. Energy Mater. Sol. Cells 67 (2001) 1-9.
[2.43] 中田時夫,《CIGS薄膜太陽電池の最新技術》,株式会社シーエムシー出版 (2010)
[2.44] J. L. Hernandez, M. L. Lucia, I. Martil, J. Santamaria, G. Gonzalez-Diaz and F. Sanchez-Quesada, “Chalcopyrite CuGaxIn1-xSe2 semiconducting thin films produced by radio frequency sputtering”, Appl. Phys. Lett. 60 (1992) 1875.
[2.45] J. A. Frantz, R. Y. Bekele, V. Q. Nguyen, J. S. Sanghera, A. Bruce, S. V. Frolov, M. Cyrus and I. D. Aggarwal, “Cu(In,Ga)Se2 thin films and devices sputtered from a single target without additional selenization“, Thin Solid Films 519 (2011) 7763-7765.
[2.46] J. Palm, V. Probst, A. Brummer, W. Stetter, R. Tolle, T. P. Niesen, S. Visbeck, O. Hernandez, M. Wendl, H. Vogt, H. Calwer, B. Freienstein and F. Karg, “CIS module pilot processing applying concurrent rapid selenization and sulfurization of large area thin film precursors”, Thin Solid Films 431 (2003) 514-522.
[2.47] H. K. Song, S. G. Kim, H. J. Kim, S. K. Kim, K. W. Kang, J. C. Lee and K. H. Yoon, “Preparation of CuIn1-xGaxSe2 thin films by sputtering and selenization”, Sol. Energy Mater. Sol. Cells 75 (2001) 145-153.
[2.48] G.-R. Hsu, S.-C. Hsu and Y. S. Liu, “Improvement of Ga distribution and enhancement of grain growth of CuInGaSe2 by incorporating a thin CuGa layer on the single CuInGa precursor”, Sol. Energy 86 (2012) 48-52.
[2.49] S. D. Kim, H. J. Kim, K. H. Yoon and J. Song, “Effect of selenization pressure on CuInSe2 thin films selenized using co-sputtered Cu-In precursors”, Sol. Energy Mater. Sol. Cells 62 (2001) 357-368.
[2.50] V. Probst, W. Stetter, W. Riedl, H. Vogt, M. Wendl, H. Calwer, S. Zweigart, K.-D. Ufert, B. Freienstein, H. Cerva and F. H. Karg, “Rapid CIS-process for high efficiency PV-modules: development towards large area processing“, Thin Solid Films 387 (2001) 262-267.
[2.51] K. Kushiya, “Improvement of electrical yield in the fabrication of CIGS-based thin-film modules”, Thin Solied Films 387 (2001) 257-261.
[2.52] S. J. Ahn, C. W. Kim, J. H. Yun, J. C. Lee and K. H. Yoon, “Effects of heat treatments on the properties of Cu(In,Ga)Se2 nanoparticles”, Sol. Energy Mater. Sol. Cells 91 (2007) 1836-1841.
[2.53] W.-T. Lin, S.-H. Chen, S.-H. Chan, C.-L. Hsieh, S.-C. Hu, Y.-T. Lu and H.-C. Cheng, “Selenization of CIGS films with different Cu-In-Ga alloy precursors”, Procedia Eng. 36 (2012) 41-45.
[2.54] F. Karg, V. Probst, H. Harms, J. Rimmasch, W. Riedl, J. Holz, R. Treichler, O. Eibl, A. Mitwalsky and A. Kiendl, “Novel rapid-thermal-processing for CIS thin-film solar cells”, Proceedings of the 23th IEEE photovoltaic specialist conference (IEEE, Louisville, 1993), p.441-446.
[2.55] J. Keranen, J. Lu, J. Barnard, J. Sterner, J. Kessler, L. Stolt, Th. W. Matthes and E. Olsson, ”Effect of sulfurization on the microstructure of chalcopyrite thin-film absorbers”, Thin Solid Films 387 (2001) 80-82.
[2.56] D. Ohashi, T. Nakada and A. Kunioka, “Improved COGS thin-film solar cells by surface sulfurization using In2S3 and sulfur vapor”, Sol. Energy Mater. Sol. Cells 67 (2001) 261-265.
[2.57] P. P. Sahay, R. K. Nath and S. Tewari, “Optical properties of thermally evaporated CdS thin films”, Cryst. Res. Technol. 42 (2007) 275-280.
[2.58] B. S. Moon, J. H. Lee and H. Jung, “Comparative studies of the properties of CdS films deposited on different substrates by R.F. sputtering”, Thin Solid Films 511-512 (2006) 299-303.
[2.59] H. Uda, H. Yonezawa, Y. Ohtsubo, M. Kosaka and H. Sonomura, “Thin CdS films prepared by metalorganic chemical vapor deposition”, Sol. Energy Mater. Sol. Cells 75 (2007) 219-226.
[2.60] J.-J. Zhu, Z.-Q. Xu, G.-Q. Fan, S.-T. Lee, Y.-Q. Li and J.-X. Tang, “Inverted polyer solar cells with atomic layer deposited CdS film as an electron collection layer“, Org. Electron. 12 (2011) 2151-2158.
[2.61] H. Khallaf, I. O. Oladeji, G. Chai and L. Chow, “Characterization of CdS thin films grown by chemical bath deposition using four different cadmium sources”, Thin Solid Films 516 (2008) 7306-7312.
[2.62] H. W. Schock and R. Noufi, “CIGS-based solar cells for the next millennium”, Prog. Photovolt. Res. Appl. 8 (2000) 151-160.
[2.63] Y. Hamakwa, “Thin-film solar cells: next generation photovoltaics and its applications”, Springer Series in Photonics (2004).
[2.64] D. Abou-Ras, G. Kostorz, A. Romeo, D. Rudmann and A. N. Tiwari, ”Structural and chemical investigations of CBD- and PVD-CdS buffer layers and interfaces in Cu(In,Ga)Se2-based thin film solar cells”, Thin Solid Films 480-481 (2005) 118-123.
[2.65] J. Kessler, M. Ruckh, D. Hariskos, U. Ruhle, R. Menner and H. W. Schock, “Interface engineering between CuInSe2 and ZnO”, Proceedings of the 23th IEEE photovoltaic specialist conference (IEEE, Louisville, 1993), p.441-446.
[2.66] R. Hunger, T. Schulmeyer, M. Lebedev, A. Klein, W. Jaegermann, B. Kniese, M. Powalla, K. Sakurai and S. Niki“, Removal of the surface inversion of CuInSe2 absorbers by NH3,aq. etching”, Proceedings of the 3rd World Conference on Photovoltaic Energy Conversion (IEEE, Osaka, 2003) p.566-569.
[2.67] R. Hunger, T. Schulmeyer, A. Klein, W. Jaegermann, M. V. Lebedev, K. Sakurai and S. Niki“, SXPS investigation of the Cd partial electrolyte treatment of CuInSe2 absorbers”, Thin Solid Films 480-481 (2005) 218-223.
[2.68] Y.-J Chang, C. L. Munsee, G. S. Herman J. F. Wager, P. Mugdur, D.-H. Lee and C.-H. Chang, “Growth, characterization and application of CdS thin films deposited by chemical bath deposition”, Surf. Interface anal. 37 (2005) 398-405.
[2.69] 林峻平,《探討硫化鎘緩衝層之離子擴散處理對CIGS薄膜元件效率影響》,國立中央大學大學碩士論文 (2012)
[2.70] A. McEcoy, T. Markvart and J. Castaner, ”Practical handbook of photovoltaics: fundamentals and applications”, second edition, Elsevier Academic Press (2012).
[2.71] M. A. Green, “Solar cells”, University of New South Wales, Sydney, Australia (1996).
[3.1] F. A. Abou-Elfotouh, H. Moutinho, A. Bakry, T. J. Coutts and L. L. Kazmerski, “Characterization of the defect levels in copper indium diselenide”, Solar Cells 30 (1991) 151-160.
[3.2] M. Konagia, Y. Ohtake and T. Okamoto, “Development of Cu(InGa)Se2 thin film solar cells with Cd-Free buffer layers”, Mater. Res. Soc. Symp. Proc. 426 (1996) 153-164.
[3.3] A. Polity, R. Krause-Rehberg, T. E. M. Staab, M. J. Puska, J. Klais, H. J. Moller and B. K. Meyer, “Study of defects in electron irradiated CuInSe2 by positron lifetime spectroscopy”, J. Appl. Phys. 83 (1998) 71.
[3.4] S. M. Wasim, C. Rincon and G. Marin, “Electricak properties of the ordered defect compound CuIn3Se5”, Phys. Stat. Sol. (a) 194 (2002) 244-252.
[3.5] R. R. Philip and B. Pradeep, “Structural analysis and optical and electrical characterization of the ordered defect compound CuIn5Se8”, Semicond. Sci. Technol. 18 (2003) 768-773.
[3.6] J. AbuShama, R. Noufi, S. Johnston, S. Ward and X. Wu, “Improved performance in CuInSe2 and surface-modified CuGaSe2 solar cells”, Proceedings of the 31th IEEE photovoltaic specialist conference (IEEE, New York, 2005), p.299.
[3.7] P. R. Subramanian and D. E. Laughlin, “The Cu-In (copper-indium) system”, Bulletin of Alloy Phase Diagrams, 10 (1989) 554-610.
[3.8] T. B. Massalski, “The mode and morphology of massive transformations in Cu-Ga, Cu-Zn, Cu-Zn-Ga and Cu-Ga-Ge allys”, Acta metal. 6 (1958) 243-253.
[3.9] N Orbey, G. A. Jones, R. W. Birkmire and T. W. Russell, “Copper-indium alloy transformations”, J. Phase Equilib. 21 (2000) 509-513.
[3.10] W. Keppner, T. Klas, W. Korner, R. Wesche and G. Schatz, “Compound formation ar Cu-In thin-film interface detected by perturbedγ-γangular correlations”, Phys. Rev. Lett. 54 (1985) 2371-2374.
[3.11] P. Berwian, “Experimentelle untersuchung und modellierung der bildungskinetik von CuInSe2-basierten halbleiter-dunnschichten fur die solarzellenherstellung”, Alexander University, PhD. Thesis (2005).
[3.12] M. Purwins, R. Ebderle, M. Schmid, P. Berwian, G. Muller, F. Hergert, S. Jost and R. Hock, “Phase relations in the ternary Cu-Ga-In system“, Thin Solid Films 515 (2007) 5895-5898.
[3.13] T. Negami, N. Kohara, M. Nishitani, T. Wada and T. Hirao, “Preparation and characterization of Cu(In1-xGax)3Se5 thin films”, Appl. Phys. Lett. 67 (1995) 825.
[3.14] Y. Okano, T. Nakada and A. Kunioka, “XPS analysis of CdS/CuInSe2 heterojunctions”, Sol. Energy Mater. Sol. Cells 50 (1998) 105-110.
[3.15] S. C. Park, D. Y. Lee, B. T. Ahn, K. H. Yoon and J. Song, “Fabrication of CuInSe2 films and solar cells by the sequential evaporation of In2Se3 and Cu2Se binary compounds”, Sol. Energy Mater. Sol. Cells 69 (2001) 99-105.
[3.16] F. O. Adurodija, J. Song, S. D. Kim, S. H. Kwon, S. K. Kim, K. H. Yoon and B. T. Ahn, “Growth of CuInSe2 thin films by high vapour Se treatment of co-sputtered Cu-In alloy in a graphite container”, Thin Solid Films 338 (1999) 13-19.
[3.17] V. F. Gremenok, E. P. Zaretskaya, V. B. Zalesski, K. Bente, W. Schmitz, R. W. Martin and H. Moller, “Preparation of Cu(In,Ga)Se2 thin film solar cells by two-stage selenization processes” Sol. Energy Mater. Sol. Cells 89 (2005) 129-137.
[3.18] H. Okimura and T. Matsumae, “Electrical properties of Cu2-xSe thin films and their application for solar cells”, Thin Solid Films 71 (1980) 53-59.
[3.19] J. R. Tuttle, M. A. Contreras, A. Tennant, D. Albin and R. Noufi, “High efficiency thin-film Cu(In,Ga)Se2-based photovoltaic devices : progress towards a universal approach to absorber fabrication”, Proceedings of the 23th IEEE photovoltaic specialist conference (IEEE, Louisville, 1993), p.415-421.
[3.20] T.-P. Hsieh, C.-C. Chuang, C.-S. Wu, J.-C. Chang, J.-W. Guo and W.-C. Chen, “Effects of residual copper selenide on CuInGaSe2 solar cells“, Solid-State Electron. 56 (2011) 175-178.
[3.21] J.-C. Chang, C.-C. Chuang, J.-W. Guo, S.-C. Hsu, H.-R. Hsu, C.-S. Wu and T.-P. Hsieh, “A investigation of CuInSe2 thin film solar cells by using CuInGa precursor”, Nanosci. Nanotechnol. Lett. 3 (2011) 200-203.
[3.22] W. K. Kim, E. A. Payzant, S.Yoon and T. J. Anderson, “In situ investigation on selenization kinetics of Cu-In precursor using time-resolved high temperature X-ray diffraction”, J. Cryst. Growth 294 (2006) 231-235.
[3.23] T. Wada, N. Kohara, S. Nishiwaki and T. Negami, “Characterization of the Cu(In,Ga)Se2/Mo interface in CIGS solar cells”, Thin Solid Films 387 (2011) 118-122.
[3.24] A. McEcoy, T. Markvart and J. Castaner, ”Practical handbook of photovoltaics: fundamentals and applications”, second edition, Elsevier Academic Press (2012).
[3.25] J. Pouzet and J. C.Bernede, “MoSe2 thin films synthesized by solid state reactions between Mo and Se thin films,” Rev. Phys. Appl. 25 (1990) 807-815.
[3.26] N. Kohara, S. Nishiwaki, Y. Hashimoto, T. Negami, T. Wada, Electrical properties of the Cu(In,Ga)Se2/MoSe2/Mo structure, Sol. Energy Mater. Sol. Cells 67 (2001) 209-215.
[3.27] T. Nakada, D. Iga, H. Ohbo and A. Kunioka, “Effects of sodium on Cu(In,Ga)Se2-based thin solid films and solar cells”, Jpn. J. Appl. Phys. 36 (1997) 732-737.
[3.28] S.-Y. Kuo, L.-B. Chang, M.-J. Jeng, W.-T. Lin, Y.-T. Lu and S.-C. Hu, “Effects of growth parameters on surface-morphological, structural, electrical and strain properties of molybdenum films by RF magnetron sputtering”, Mater. Res. Soc. Symp. Proc. 1123 (2009) 1105-1118.
[3.29] D. H. Shin, Y. M. Shin, J. H. Kim, B. T. Ahn and K. H. Yoon, “Control of preferred oritation of Cu(In,Ga)Se2 thin film by the surface modification of Mo film”, J. Electrochem. Soc. 159 (2012) B1-B5.
[3.30] O. Volobujeva, J. Kois, R. Traksmaa, K. Muska, S. Bereznev, M. Grossberg and E. Mellikov, “Influence of annealing conditions on the structural quality of CuInSe2 thin films”, Thin Solid Films 516 (2008) 7105-7109.
[3.31] O. Volobujeva, M. Altosaar, J. Raudoja and E. Mellikov, “SEM analysis and selenization of Cu-In alloy films producted by co-sputtering of metals”, Sol. Energy Mater. Sol. Cells 93 (2009) 11-14.
[3.32] X. Zhu, Y. Wang, A. Li, L. Zhang and F. Huang, “The effect of N2 gas pressure during the rapid thermal process on the structural and morphology properties of CIGS films“, Adv. Mater. Res. 463-464 (2012) 614-617.
[3.33] J. K. Sung, S. C. Kim, H. Park and W. K. Kim, “Cu(In,Ga)Se2 thin film photovoltaic absorber formation by rapid thermal annealing of binary stacked precursors“, Thin Solid Films 520 (2011) 1484-1488.
[3.34] J. Koo, S. Jeon, M. Oh, H.-I. Cho, C. Son and W. K. Kim, “Optimization of Se layer thickness in Mo/CuGa/In/Se precursor for the formation of Cu(In,Ga)Se2 by rapid thermal annealing”, Thin Solid Films 535 (2013) 148-153.
[3.35] W.-T. Lin, S.-H. Chan, S.-Z. Tseng, J.-J. He, S.-H. Chen, R.-F. Shih, C.-W. Tseng, T. T. Li, S.-C. Hu, W.-X. Peng and Y.-T. Lu, “Manipulation of MoSe2 films on CuIn(Ga)Se2 cells during rapid thermal process”, Int. J. Photoenergy 2014 (2014) 253285.
[3.36] D. Braunger, D. Hariskos, G. Bilger and H. W. Schock, ”Influence of sodium on the growth polycrystalline Cu(In,Ga)Se2 thin films”, Thin Solid Films 361-362 (2000) 161-166.
[3.37] X. Zhu, Z. Zhou, Y. Wang, L. Zhang, A. Li and F. Huang, “Determining factor of MoSe2 formation in Cu(In,Ga)Se2 solar cells”, Sol. Energy Mater. Sol. Cells 101 (2012) 57-61.
[3.38] J. H. Scofield, S. Asher, D. Albin, T. Tuttle, M. Contreras, D. Niles, R. Reedy, A. Tennant and R. Noufi, “Sodium diffusion, selenization, and microstructural effects associated with various molybdenum back contact layers for CIS-based solar cells”, Proceedings of the 24th IEEE photovoltaic specialist conference (IEEE, Waikoloa, 1994), p.164-167.
[3.39] J. Palm, V. Probst, A. Brummer, W. Stetter, R. Tolle, T. P. Niesen, S. Visbeck, O. Hernandez, M. Wendl, H. Vogt, H. Calwer, B. Freienstein and F. Karg, “CIS module pilot processing applying concurrent rapid selenization and sulfurzation of large area thin film precursors”, Thin Solid Films 431-432 (2003) 514-522.
[3.40] S.-H. Wei, S. B. Zhang and A. Zunger, “Effects of Na on the electrical and structural properties of CuInSe2“, J. Appl. Phys. 85 (1999) 7214-7218.
[3.41] M. Bodegard, K. Granath, L. Stolt and A. Rockett, “The behaviour of Na implanted into Mo thin films during annealing” Sol. Energy Mater. Solar Cells 58 (1999) 199-208.
[3.42] S.-Y. Kuo, M.-J. Jeng, L.-B. Chang, W.-T. Lin, S.-C. Hu, Y.-T. Lu, and C.-W. Wu, “Optimization of growth parameters for improved adhesion and electricity of molybdenum films deposited by RF magnetron sputtering”, Proceedings of the 34th IEEE photovoltaic specialist conference (IEEE, Philadelphia, 2009), p.594-596.
[3.43] W. N. Shafarman and J. Zhu, “Effect of substrate temperature and deposition profile on evaporated Cu(In,Ga)Se2 films and devices”, Thin Solid Films 361-362 (2000) 473-477.
[3.44] A. Duchatelet, G. Savidand, R. N. Vannier and D. Lincot, “Optimization of MoSe2 formation for Cu(In,Ga)Se2-based solar cells by using thin superficial molybdenum oxide barrier layers”, Thin Solid Films 545 (2013) 97-99.
[3.45] 林育俊,《界面特性對硒化銅銦鎵太陽能電池效能之影響》,國立東華大學碩士論文 (2010)
[3.46] Y.-C. Lin, M.-T. Shen, Y.-L. Chen, H.-R. Hsu and C.-H. Wu and C.-H. Wu, “A study on MoSe2 layer of Mo contact in Cu(In,Ga)Se2 thin film solar cells”, Thin Solid Films (2014) in Press.
[3.47] S. Wagner, J. L. Shay, P. Migliorato and H. M. Kasper, “CuInSe2/CdS heterojunction photovoltaic detectors”, Appl. Phys. Lett. 25 (1974) 434.
[3.48] D. Schmid, M. Ruckh, F. Grunwald and H. W. Schock, “Chalcopyrite/defect chalcopyrite heterojunction on the basis of CuInSe2”, J. Appl. Phys. 73 (1993) 2902.
[3.49] K. Ramanathan, R. N. Bhattacharya, J. Granata, J. Webb, D. Niles, M. A. Contreras, H. Wiesner, F.S. Hasoon, Noufi, “Advances in the CIS Research at NREL”, Proceedings of the 26th IEEE Photovoltaic Specialists Conference (IEEE, Anaheim, 1997), p.319.
[3.50] T. Wada, S. Hayashi, Y. Hashimoto, S. Nishiwaki, T. Satoh, T. Negami, M. Nishitani, “High efficiency Cu(In,Ga)Se2 (CIGS) solar cells with improved CIGS surface”, Proceedings of the 2nd World Conference Photovoltaic Solar Energy Conversion (IEEE, Vienna, 1998) p.403.
[3.51] T. Nakada, “Nano-structural investigations on Cd-doping into Cu(In,Ga)Se2 thin films by chemical bath deposition process”, Thin Solid Films 361-326 (2000) 346-352.
[3.52] 中田時夫,《CIGS薄膜太陽電池の最新技術》,株式会社シーエムシー出版 (2010)
[3.53] P. W. Yu, S. P. Faile and Y. S. Park, “Cadium-diffused CuInSe2 junction diode and photovoltaic detection”, Appl. Phys. Lett. 26 (1975) 384
[3.54] T. Nakada and A. Kunioka, “Direct evidence of Cd diffusion into Cu(In,Ga)Se2 thin films during chemical-bath deposition process of CdS film”, Appl. Phys, Lett. 74 (1999) 2444-2446.
[3.55] L. Kronik, U. Rau, J.-F. Guillemoles, D. Braunger, H.-W. Schock and D. Cahen, “Interface redox engineering of Cu(In,Ga)Se2-based solar cells: oxygen, sodium, and chemical bath effects”, Thin Solid Films 361-362 (2000) 353-359.
[3.56] P. K. Johnson, A. O. Pudov, J. R. Sites, K. Ramanathan, F. S. Hasoon and D. E. Tarrant, “Interface properties of CIGS(S)/buffer layers formed by the Cd-partial electrolyte process”, Proceedings of the 29th IEEE photovoltaic specialist conference (IEEE, 2002), p.764-767.
[3.57] B. Lei, W. W. Hou, S.-H. Li, W. Yang, C.-H. Chung and Y. Yang, “Cadmium ion soaking treatment for solution processed CuInSxSe2-x solar cells and its effect on defect properties”, Sol. Energy Mater. Sol. Cells 95 (2011) 2384-2389.
[3.58] S. Kijima and T. Nakada, “High-temperature defradation mechanism of Cu(In,Ga)Se2-based thin film solar cells”, Appl. Phys. Express 1 (2008) 075002.
[3.59] J. H. Schon, V. Alberts and E. Bucher, “Structural and optical characterization of polycrystalline CuInSe2”, Thin Solid Films 301 (1997) 115-121.
[3.60] L. L. Kazmerski, O. Jamjoum, P. J. Ireland and S. K. Deb, ”Initial oxidation of CuInSe2”, J. Vac. Sci. Technol. 19 (1981) 467-471.
[3.61] I. Dirnstorfer, W. Burkhardt, W. Kriegseis, I. O Osterreicher, H. Alves, D. M. Hofmann, O. Ka, A. Polity, B. K. Meyer, D. Braunger, “Annealing studies on CuIn(Ga)Se2: the influence of gallium”, Thin Solid Films 361 (2000) 400-405.
[3.62] R. Hunger, T. Schulmeyer, M. Lebedev, A. Klein, W. Jaegermann, B. Kniese, M. Powalla, K. Sakurai and S. Niki“, Removal of the surface inversion of CuInSe2 absorbers by NH3,aq. etching”, Proceedings of the 3rd World Conference on Photovoltaic Energy Conversion (IEEE, Osaka, 2003) p.566-569.
[3.63] R. Noufi, R. J. Matson, R. C. Powell and C. Herrington, “The role of oxygen in CuInSe2 thin films and CdS/CuInSe2 devices”, Solar Cells 16 (1986) 479-493.
[3.64] D. Cahen and R. Noufi, “Surface passivation of polycrystalline, chalcogenide based photovoltaic cells“, Solar Cells 30 (1991) 53-59.
[3.65] 莊宗曄,《濺鍍銅銦硒薄膜之硒處理研究》,國立高雄大學碩士論文 (2009)
[3.66] T. Nakada, H. Ohbo, T. Watanabe, H. Nakazawa, M. Matsui and A. Kunioka, “Improved Cu(In,Ga)(S,Se)2 thin film solar cells by surface sulfurization”, Sol. Energy Mater. Sol. Cells 49 (1997) 295-290.
[4.1] F. O. Adurodija, J. Song, S. D. Kim, S. H. Kwon, S. K. Kim, K. H. Yoon and B. T. Ahn, “Growth of CuInSe2 thin films by high vapour Se treatment of co-sputtered Cu-In alloy in a graphite container”, Thin Solid Films 338 (1999) 13-19.
[4.2] F. O. Adurodija, M. J. Carter and R. Hill, “Solid-liquid recation mechanisms in the formation of high quality CuInSe2 by the stacked element layer (SEL) technique”, Sol. Energy Mater. Sol. Cells 37 (1995) 203-216.
[4.3] Y. Yan, K. M. Jones, R. Noufi and M. M. Al-Jassim, “Argon ion beam and electron beam-induced damage in Cu(In,Ga)Se2 thin films” Thin Solid Films 515 (2007) 4681-4685.
[4.4] F. A. Abou-Elfotouh, S. K. Kim, S. D. Kim, J. S. Song, K. H. Yoon and B. T. Ahn, “Characterization of co-sputtered Cu-In alloy precursors for CuInSe2 thin films fabrication by close-spaced selenization”, Sol. Energy Mater. Sol. Cells 55 (1998) 225-236.
[4.5] O. Volobujeva, M. Altosaar, J. Raudoja, E. Mellikov, M. Grossberg, L. Kaupmees and P. Barvinschi, “SEM analysis and selenization of Cu-In alloy films produced by co-sputtering of metals,” Sol. Energy Mater. Sol. Cells 93 (2009) 11-14.
[4.6] H. K. Song, J. K. Jeong, H. J, Kim, S. K. Kim and K. H. Yoon, “Fabrication of CuIn1-xGaxSe2 thin film solar cells by sputtering and selenization process”, Thin Solid Films 435 (2003) 186-192.
[4.7] W. Liu, Y. Sun, Y. Song, C.-J. Li, Q. He, F.-Y Li and J.-G. Tian, “Preparation of high quality Culn1-xGaxSe2 thin films by modified selenization procedure of sequential sputtering metallic precursors”, Proceedings of the 33rd IEEE Photovoltaic Specialists Conference (IEEE, San Diego, 2008), p.1-4.
[4.8] P. Berwian, “Experimentelle untersuchung und modellierung der bildungskinetik von CuInSe2-basierten halbleiter-dunnschichten fur die solarzellenherstellung”, Alexander University, PhD. Thesis (2005).
[4.9] H. Rodriguez-Alvarez, I. M. Koetschau, C. Genzel and H.W. Schock, “Growth paths for the sulfurization of Cu-rich Cu/In thin films”, Thin Solid Films 517 (2009) 2140-2144.
[4.10] D. Abou-Ras, G. Kostorz, D. Bremaud, M. Kalin, F. V. Kurdesau, A. N. Tiwari and M. Dobeli, “Formation and characterization of MoSe2 for Cu(In,Ga)Se2 based solar cells”, Thin Solid Films 480 (2005) 433-438.
[4.11] H. Park, S. C. Kim, S.-H. Lee, J. Koo, S. H. Lee, C.-W. Jeon, S. Yoon and W. K. Kim, “Effect of precursor structure on Cu(In,Ga)Se2 formation by reactive annealing”, Thin Solid Films 519 (2011) 7245-7249.
[4.12] E. Rudiger, J. Djordjevic, C. V. Klopmann, B. Barconed, A. Perez-Rodriguez and R. Scheer, “Real-time study of transformations in Cu-In chalcogenide thin films using in situ Raman spectroscopy and XRD”, J. Phys. Chem. Solids 66 (2005) 1954-1960.
[4.13] K. Yoshino, H. Yokoyama, K. Maeda and T. Ikari, “Crystal growth and photoluminescence of CuInxGa1-xSe2 alloys”, J. Cryst. Growth 211 (2000) 476-479.
[4.14] H. Tanino, T. Maeda, H. Fujikake, H. Nakanishi, S. Endo and T. Irie, “Raman spectra of CuInSe2”, Phys. Rev. B 45 (1992) 13323-13330.
[4.15] C. Rincon and F. J. Ramirez, “Lattice vibrations of CuInSe2 and CuGaSe2 by Raman microspectrometry”, J. Appl. Phy. 72 (1992) 4321-4324.
[4.16] T. Ohtani, Y. Tachibana, J. Ogura, T. Miyake, Y. Okada and Y. Yokota, “Physical properties and phase transitions of βCu2-xSe (0.20≦x≦0.25)”, J. Alloys Compd. 279 (1998) 136-141.
[4.17] R. R. Philip, B. Pradeep, G. S. Okram and V. Ganesan, “Investigations of the electrical properties in CuInSe2 and the related ordered vacancy compounds” Semicond. Sci. Technol 19 (2004) 798-806.
[4.18] T.-P. Hsieh, C.-C. Chuang, C.-S. Wu, J.-C. Chang, J.-W. Guo and W.-C. Chen, “Effects of residual copper selenide on CuInGaSe2 solar cells“, Solid-State Electron. 56 (2011) 175-178.
[4.19] J.-C. Chang, C.-C. Chuang, J.-W. Guo, S.-C. Hsu, H.-R. Hsu, C.-S. Wu and T.-P. Hsieh, “A investigation of CuInSe2 thin film solar cells by using CuInGa precursor”, Nanosci. Nanotechnol. Lett. 3 (2011) 200-203.
[5.1] D. Abou-Ras, G. Kostorz, D. Bremaud, M. Kalin, F. V. Kurdesau, A. N. Tiwari and M. Dobeli, “Formation and characterization of MoSe2 for Cu(In,Ga)Se2 based solar cells”, Thin Solid Films 480 (2005) 433-438.
[5.2] H. Park, S. C. Kim, S.-H. Lee, J. Koo, S. H. Lee, C.-W. Jeon, S. Yoon and W. K. Kim, “Effect of precursor structure on Cu(In,Ga)Se2 formation by reactive annealing”, Thin Solid Films 519 (2011) 7245-7249.
[5.3] O. Volobujeva, J. Kois, R. Traksmaa, K. Muska, S. Bereznev, M. Grossberg and E. Mellikov, “Influence of annealing conditions on the structural quality of CuInSe2 thin films”, Thin Solid Films 516 (2008) 7105-7109.
[5.4] O. Volobujeva, M. Altosaar, J. Raudoja and E. Mellikov, “SEM analysis and selenization of Cu-In alloy films producted by co-sputtering of metals”, Sol. Energy Mater. Sol. Cells 93 (2009) 11-14.
[5.5] X. Zhu, Y. Wang, A. Li, L. Zhang and F. Huang, “The effect of N2 gas pressure during the rapid thermal process on the structural and morphology properties of CIGS films“, Adv. Mater. Res. 463-464 (2012) 614-617.
[5.6] L. Assmann, J. C. Bernede, A. Drici, C. Amory, E. Halgand and M. Morsli, “Study of Mo thin films and Mo/CIGS interface properties”, Appl. Surf. Sci. 246 (2005) 159-166.
[5.7] S. Lee, J. Koo, S. Kim, S.-H. Kim, T. Cheon, J. S. Oh, S. J. Kim and W. K. Kim, “Characteristics of MoSe2 formation during rapid thermal processing of Mo-coated glass”, Thin Solid Films 535 (2013) 206-213.
[6.1] F. A. Abou-Elfotouh, H. Moutinho, A. Bakry, T. J. Coutts and L. L. Kazmerski, “Characterization of the defect levels in copper indium diselenide”, Solar Cells 30 (1911) 151-160.
[6.2] I. Dirnstorfer, W. Burkhardt, W. Kriegseis, I. O Osterreicher, H. Alves, D. M. Hofmann, O. Ka, A. Polity, B. K. Meyer, D. Braunger, “Annealing studies on CuIn(Ga)Se2: the influence of gallium”, Thin Solid Films 361 (2000) 400-405.
[6.3] S. Shirakata and T. Nakada, “Photoluminescence and time-resolved photoluminescence in Cu(In,Ga)Se2 thin films and solar cells”, Phys. Status Solidi C 6 (2009) 1059-1062.
[6.4] S. Kijima and T. Nakada, “High-temperature defradation mechanism of Cu(In,Ga)Se2-based thin film solar cells”, Appl. Phys. Express 1 (2008) 075002.
[6.5] P. K. Johnson, A. O. Pudov, J. R. Sites, K. Ramanathan, F. S. Hasoon and D. E. Tarrant, “Interface properties of CIGS(S)/buffer layers formed by the Cd-partial electrolyte process”, Proceedings of the 29th IEEE photovoltaic specialist conference (IEEE, 2002), p.764-767.
[6.6] B. Lei, W. W. Hou, S.-H. Li, W. Yang, C.-H. Chung and Y. Yang, “Cadmium ion soaking treatment for solution processed CuInSxSe2-x solar cells and its effect on defect properties”, Sol. Energy Mater. Sol. Cells 95 (2011) 2384-2389.
[6.7] 何誌堅,《硫化鎘薄膜對軟性太陽電池特性之研究》,國立中央大學大學碩士論文 (2014).
[6.8] D. Cahen and R. Noufi, “Surface passivation of polycrystalline, chalcogenide based photovoltaic cells“, Solar Cells 30 (1991) 53-59.
[6.9] X. Wang, S. S. Li, W. K. Kim, S. Yoon, V. Craciun, J. M. Howard, S. Easwaran, O. Manasreh, O. D. Crisalle and T. J. Anderson, “Investigation of rapid thermal annealing on Cu(In,Ga)Se2 films and solar cells”, Sol. Energy Mater. Sol. Cells 90 (2006) 2855-2866.
[6.10] 林峻平,《探討硫化鎘緩衝層之離子擴散處理對CIGS薄膜元件效率影響》,國立中央大學大學碩士論文 (2012).
[6.11] R. Hunger, T. Schulmeyer, M. Lebedev, A. Klein, W. Jaegermann, B. Kniese, M. Powalla, K. Sakurai and S. Niki“, Removal of the surface inversion of CuInSe2 absorbers by NH3,aq. etching”, Proceedings of the 3rd World Conference on Photovoltaic Energy Conversion (IEEE, Osaka, 2003) p.566-569.
[6.12] J. F. Moulder, W. F. Stickle, P. E. Sobol and K. D. Bomben, “Handbook of X-ray photoelectron spectroscopy”, Eden Prairie: Physical Electronics Press. (1995).
[6.13] R. Hunger, T. Schulmeyer, M. Lebedev, A. Klein, W. Jaegermann, B. Kniese, M. Powalla, K. Sakurai and S. Niki“, Removal of the surface inversion of CuInSe2 absorbers by NH3,aq. etching”, Proceedings of the 3rd World Conference on Photovoltaic Energy Conversion (IEEE, Osaka, 2003) p.566-569.
[6.14] C. Malitesta, D. Centonze, L. Sabbatini, P. G. Zambonin, L. P. Bicellib and S. Maffi, “Analytical characterization by X-Ray photoelectron spectroscopy of quaternary chalcogenides for cathodes in lithium cells”, J. Mater. Chem. 1 (1991) 259-263.
[6.15] T. Nakada, H. Ohbo, T. Watanabe, H. Nakazawa, M. Matsui and A. Kunioka, “Improved Cu(In,Ga)(S,Se)2 thin film solar cells by surface sulfurization”, Sol. Energy Mater. Sol. Cells 49 (1997) 295-290.
[6.16] M. Bär, W. Bohne, J. Röhrich, E. Strub, S. Lindner, M. C. Lux-Steiner, Ch.-H. Fischer, T. P. Niesen and F. Karg, “Determination of the band gap depth profile of the penternary Cu(In(1-x)Gax)(SySe(1-y))2 chalcopyrite from its composition gradient”, J. Appl. Phys. 96 (2004) 3857-3860. [6.17] G. A. Medvedkin, E. I. Terukov, Y. Hasegawa, K. Hirose and K. Sato, “Microdefects and point defects optically detected in Cu(In.Ga)Se2 thin film solar cells exposed to the damp and heating”, Sol. Energy Mater. Sol. Cells 75 (2003) 127-133.
[6.18] A. F. Halverson, ”The role of sulfur alloying in defects and transitions in copper indium gallium diselenide disulfide thin films”, PhD thesis, University of Oregon (2007).
[6.19] S. Shirakata, K. Ohkubo, Y. Ishii and T. Nakada, “Effects of CdS buffer layers on photoluminescence properties of Cu(In,Ga)Se2 solar cells”, Sol. Energy Mater. Sol. Cells 93 (2009) 988-992.
[6.20] 施敏,《半導體元件物理與製作技術》,國立交通大學出版 (2002).
[6.21] M. A. Contreras, J. Tuttle, A. Gabor, A. Tennant, K. Ramanathan, S. Asher, A. Franz, J. Keane, L. Wang, J. Scofield and R. Noufi, “High efficiency Cu(In,Ga)Se2-based solar cells: processing of novel absorber structures”, Proceedings of the 24th IEEE Photovoltaic Specialists Conference (IEEE, Walkoloa, 1994), p. 68-75.
|