參考文獻 |
[1] A. K. Goel and A. Kalia, “Comparison of NMOS, CMOS and GaAs technologies,” Circuits and Systems, Proceedings of the 32nd Midwest Symposium, Champaign, IL, 1989, pp. 1238–1241 vol.2.
[2] P. J. Zampardi, “Will CMOS amplifiers ever kick-GaAs?,” in Proc. IEEE Custom Integr. Circuits Conf., 2010, pp. 1–4.
[3] P. J. Zampardi, “Performance and modeling of Si and SiGe for power amplifiers,” in SiliconMonolithic Integr. Circuits in RF Syst., 2007, pp. 13–17.
[4] J. Deng, P. Gudem, L.E. Larson, P. M. Asbeck, “A high average-efficiency SiGe HBT power amplifier for WCDMA handset applications,” IEEE Trans. Microw. Theory Techn., vol. 53, no. 2, pp. 529–537, Feb. 2005.
[5] V. Ramachandran, A. J. Joseph, J. B. Johnson, M. D. Gallagher, P.-O. Brandt, L. Tilly, D. R. Greensberg, W. E. Ansley, U. Gogineni, D. L. Harame, and J. S. Dunn, “A fully-manufacturable 0.5 um SiGe BiCMOS technology for wireless power amplifier applications,” in Proc. 32nd Eur. Microwave Conf. GAAS/EuMC 5: High Linearity Pas II, 2002, pp. 303–306.
[6] C. T. Burns, A. Chang, and D. W. Runton, “A 900 MHz, 500 W Doherty power amplifier using optimized output matched Si LDMOS power transistors,” in IEEE MTT-S Int. Microw. Symp. Dig., Jun. 2007, pp. 1557–1580.
[7] A. Tombak, D. C. Dening, M. S. Carroll, J. Costa, and E. Spears, “High-efficiency cellular power amplifiers based on a modified LDMOS process on bulk silicon and silicon-on-insulator substrates with integrated power management circuitry,” IEEE Trans. Microw. Theory Techn., vol. 60, no. 6, pp. 1862–1869, Jun. 2012.
[8] N. O. Sokal and A. D. Sokal, “Class E-A new class of high-efficiency tuned single-ended switching power amplifiers,” IEEE J. Solid-State Circuits, vol. 10, no. 3, pp. 168–176, Jun. 1975.
[9] R. A. Beltran, "Transmission-line broadband GaN FET class-E power amplifier," in IEEE MTT-S Int. Microw. Symp. Dig. (IMS), San Francisco, CA, 2016, pp. 1–4.
[10] C. Rong, Y. Xu, M. Xia, Y. Luo and R. Ou, "Broadband class E GaN power amplifier design in S band with low-pass match," Communication Problem-Solving (ICCP), 2014 IEEE International Conference, Beijing, 2014, pp. 372–375.
[11] W. H. Doherty, “A new high efficiency power amplifier for modulated waves,” Proc. IRE, vol. 24, Sep. 1936, pp. 1163–1182.
[12] J. C. Park, J. G. Yook, Y. D. Kim and C. H. Lee, “Dual-band switching Doherty power amplifier using phase shifter composed of PIN diode,” Microwave Integrated Circuits Conference (EuMIC), 2011 European, Manchester, 2011, pp. 300–303.
[13] M. Hayakawa, K. Shiikuma, and T. Kaneko, “A total bandwidth expanded dual-band GaN Doherty PA toward the LTE-A carrier aggregation application,” IEEE Compound Semi. IC Symp. (CSICS), Oct. 2013, pp. 1–4
[14] X. A. Nghiem, J. Guan, and R. Negra, “Design of a broadband three-way sequential Doherty power amplifier for modern wireless communications,” in IEEE MTT-S Int. Microw. Symp. Dig., 2014 pp. 1–4
[15] D. Kang, D. Kim, Y. Cho, J. Kim, B. Park, C. Zhao, and B. Kim, “1.6–2.1 GHz broadband Doherty power amplifiers for LTE handset applications,” in IEEE MTT-S Int. Microw. Symp. Dig., Jun. 5–10, 2011, pp. 1–4
[16] J. H. Qureshi et al., “A 700-W peak ultra-wideband broadcast Doherty amplifier,” in IEEE MTT-S Int. Microwave Symp. Dig., June 2014, pp. 1–4
[17] S. Watanabe et al., “A Broadband Doherty Power Amplifier without a Quarter-Wave Impedance Inverting Network,” Proc. APMC 2012, pp. 361–363, December 2012.
[18] D.-T. Wu and S. Boumaiza, “A modified Doherty configuration for broadband amplification using symmetrical devices,” IEEE Trans. Microw. Theory Techn., vol. 60, no. 10, pp. 3201–3213, Oct. 2012.
[19] E. Kaymaksut, D. Zhao, and P. Reynaert, “E-band transformer-based doherty power amplifier in 40 nm CMOS,” in Proc. RFIC, Jun. 2014, pp. 167–170.
[20] E. Kaymaksut, D. Zhao, and P. Reynaert, “Transformer-based Doherty power amplifiers for mm-wave applications in 40-nm CMOS,” IEEE Trans. Microw. Theory Techn., vol. 63, no. 4, pp. 1186–1192, Apr. 2015.
[21] K.-J. Cho, J.-H. Kim, and S. Stapleton, “A highly efficient Doherty feedforward linear power amplifier for W-CDMA base-station applications,” IEEE Trans. Microw. Theory Techn., vol. 53, no. 1, pp. 292–300, Jan. 2005.
[22] J. Kim, J. Cha, I. Kim, and B. Kim, “Optimum operation of asymmetrical-cells-based linear Doherty power Amplifiers-Uneven power drive and power matching,” IEEE Trans. Microw. Theory Techn., vol. 53, no. 5, pp. 1802–1809, May 2005.
[23] W. Chen, S. Zhang, Y. Liu, Y. Liu, and F. Ghannouchi, “A concurrent dual-band uneven Doherty power amplifier with frequency-dependent input power division,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 61, no. 2, pp. 552–561, Feb. 2014.
[24] E. Kaymaksut and P. Reynaert, “Transformer-based uneven Doherty power amplifier in 90 nm CMOS for WLAN applications,” IEEE J. Solid-State Circuits, vol. 47, no. 7, pp. 1659–1671, Jul. 2012.
[25] V. Camarchia et al., “The Doherty power amplifier: Review of recent solutions and trends,” IEEE Trans. Microw. Theory Techn., vol. 63, no. 2, pp. 559–571, Feb. 2015
[26] O. Jeon, R.M. Fox, B.A. Myers; “Analog AGC circuitry for a CMOS WLAN receiver”; IEEE J. Solid-State Circuits, vol. 41, no. 10, pp. 2291–2300, Oct. 2006.
[27] G. S. Sahota and C. J. Persico, “High dynamic range variable-gain ampli- fier for CDMA wireless applications,” in IEEE Int. Solid-State Circuits Conf. (ISSCC) Dig. Techn. Papers, Feb. 1997, pp. 374–375.
[28] W. Hioe, K. Maio, T. Oshima, Y. Shibahara, T. Doi, K. Ozaki, S. Arayashiki; “0.18-μm CMOS Bluetooth analog receiver with -88-dBm sensitivity”; IEEE J. Solid-State Circuits; vol. 39, Issue: 2, pp. 374–377, Feb. 2004.
[29] W.A. Serdijn, A.C. Van Der Woerd, J. Davidse, A.H.M. van Roermund, “A low-voltage lowpower fully-integratable automatic gain control for hearing instruments”, IEEE J. Solid-State Circuits, vol. 29, no 8, pp. 943–946, Aug. 1994.
[30] J. Silva-Martínez and J. Salcedo-Suñer, “A CMOS automatic gain control for hearing aid devices,” in Proc. Int. Symp. Circuits and Systems, vol. I, 1998, pp. 297–300.
[31] M. Nakamura, N. Ishihara, Y. Akazawa, H. Kimura; “An instantaneous response CMOS optical receiver IC with wide dynamic range and extremely high sensitivity using feed-forward auto-bias adjustment”, IEEE J. Solid-State Circuits, vol. 30, no. 9, pp. 991–997, Sep. 1995.
[32] A. Tanabe, M. Soda, Y. Nakahara, T. Tamura, K. Yoshida, A. Furukawa; “A single-chip 2.4- Gb/s CMOS optical receiver IC with low substrate cross-talk preamplifier”, IEEE J. Solid-State Circuits, vol. 33, no. 12, pp. 2148–2153, Dec. 1998.
[33] A. Grebennikov and N. Sokal, Switchmode RF power amplifiers, Elsevier/Newnes, 2007, pp. 179–292.
[34] B. L. Humphreys, “Characteristic of broadband parametric amplifiers using fitter networks,” Proc. Inst. Elec. Eng., vol. 111, no. 2, pp. 264, 1964.
[35] C. S. Aitchison and R. V. Gelsthorpe, “A circuit technique for broadbanding the electronic tuning range of Gunn oscillators,” IEEE J. Solid-State Circuits, vol. 12, no. 1, pp. 21–28, Feb. 1977.
[36] N. Kumar, C. Prakash, A. Grebennikov and A. Mediano, “High-efficiency broadband parallel-circuit class-E RF power amplifier With reactance-compensation technique,” IEEE Trans. Microw. Theory Techn., vol. 56, no. 3, pp. 604–612, Mar. 2008.
[37] Coilcraft, “High frequency, high current power inductors,” kit C456 datasheet, Mar. 2002 http://www.coilcraft.com/pdfs/1010vs.pdf
[38] Freescale, “RF power field effect transistors,” MRF6V2010NR1 datasheet, Feb. 2007 http://cache.nxp.com/files/rf_if/doc/data_sheet/MRF6V2010N.pdf
[39] American Technical Ceramics Corp., “ATC 100 B series porcelain superchip multilayer capacitors,” 100 B datasheet, Sep. 2014 http://www.atceramics.com/UserFiles/100b.pdf
[40] Freescale, “RF power field effect transistors,” MRF6V2300NR1 datasheet, Feb. 2007 [Revised May 2007]. http://www.nxp.com/files/rf_if/doc/data_sheet/MRF6V2300N.pdf
[41] F. J. Ortega-Gonzalez, “High power wideband class-E power amplifier,” IEEE Microw. Wireless Compon. Lett., vol. 20, no. 10, pp. 569–571, Oct. 2010.
[42] F. H. Raab, “Broadband class-E power amplifier for HF and VHF,” in IEEE MTT-S Int. Microw. Symp. Dig., Jun. 11–16, 2006, pp. 902–905.
[43] 李文賓,高功率高效率振盪器研製,國立中央大學電機工程研究所碩士論文,民國100 年7 月。
[44] 李哲誠,高效率功率放大與振盪器研製,國立中央大學電機工程研究所碩士論文,民國100 年7 月。
[45] S. Ray and M. M. Hella, “A 10 Gb/s Inductorless AGC Amplifier With 40 dB Linear Variable Gain Control in 0.13 μm CMOS,” IEEE J. Solid-State Circuits, vol. 51, no. 2, pp. 440–456, Feb. 2016.
[46] C.-F. Liao and S.-I. Liu, “40 Gb/s transimpedance-AGC amplifier and CDR circuit for broadband data receivers in 90 nm CMOS,” IEEE J. Solid-State Circuits, vol. 43, no. 3, pp. 642–655, Mar. 2008.
[47] P. Ossieur et al., “A 10Gb/s linear burst-mode receiver in 0.25m SiGe BiCMOS”, IEEE J. Solid-State Circuits, vol. 48, pp. 381–390, Feb. 2013.
[48] W. Hioe, K. Maio, T. Ooshima, Y. Shibahara, and T. Doi, “Gain calibration and feedforward automatic gain control for CMOS radio-frequency ICs,” in Symp. VLSI Circuits Dig. Tech. Papers, Kyoto, Japan, June 2003, pp. 127–130.
[49] J. P. A. Pérez, B. Calvo, and S. Celma, “A High-performance CMOS feedforward AGC circuit for a WLAN receiver, ” IEEE Trans. Ind. Electron, vol.57, no.8, pp.2851–2857, Aug. 2010
[50] Alegre Pérez, J., Celma Pueyo, S. and Calvo López, B., Automatic gain control. New York: Springer, 2011, pp. 1–28.
[51] J.K. Kwon, K.D. Kim, W.C. Song, G.H. Cho; “Wideband high dynamic range CMOS variable gain amplifier for low voltage and low power wireless applications,” IET Electron. Lett., vol. 39, no. 10, pp. 759–760, May 2003.
[52] Q.-H. Duong, L. Quan, and S.-G. Lee, “An all CMOS 84-dB linear low-power variable gain amplifier,” in VLSI Circuits Symp. Techn. Dig., Jun. 2005, pp. 114–117.
[53] W. Liu, S.-I. Liu, and S.-K. Wei, “CMOS exponential-control variable gain amplifiers,” Proc. Inst. Elect. Eng. Circuits Devices Syst., vol. 151, no. 2, pp. 83–86, Apr. 2004
[54] S.-C. Tsou, C.-F. Li, and P. C. Huang, “A low-power CMOS linear-in-decibel variable gain amplifier with programmable bandwidth and stable group delay,” IEEE Trans. Circuits Syst. I, Reg. Papers, vol. 53, no. 12, pp. 1436–1440, Dec. 2006.
[55] Analog device, “High Speed Variable Gain Amplifiers (VGAs),” MT-073 tutorial, Aug. 2010 http://www.analog.com/media/en/training-seminars/tutorials/MT-073.pdf
[56] Agilent RF and Microwave Test Accessories “Directional Couplers and Bridges,” Dec. 2000 http://www.keysight.com/upload/cmc_upload/All/Direct_CouplerOverview.pdf
[57] Texas Instruments, “NE5532x, SA5532x Dual Low-Noise Operational Amplifiers,” Jan. 2015 http://www.ti.com/lit/ds/symlink/ne5532.pdf
[58] Meanwell, “1000 W Power Supply with Single Output,” RSP-1000 series datasheet, May 2016 http://actec.dk/media/wysiwyg/Actec/PDF/Meanwell/RSP-1000-SPEC.PDF
[59] Mini-Circuits, “Coaxial High Power Amplifier,” ZHL-5W-1 datasheet, Mar. 2002 https://www.minicircuits.com/pdfs/ZHL-5W-1.pdf
[60] S. Cripps, RF Power Amplifiers for Wireless Communications, ser. Artech House Microwave Library. Norwood, MA, USA: Artech House, 2006, pp. 290–298.
[61] S. Cripps, Advanced Techniques in RF Power Amplifiers Design, Artech House Inc., Norwood, MA, USA, 2002, pp. 33–57.
[62] A. Grebennikov, RF and Microwave Power Amplifier Design. New York: Mc Graw-Hill, 2005, pp. 372–380.
[63] C. Fager J. C. Pedro, N. B. de Carvalho, H. Zirath, F. Fortes, M. J. Rosario, “A comprehensive analysis of IMD behaviour in RF CMOS power amplifiers.” IEEE J. Solid-State Circuits, vol. 39, no. 1, Jan. 2004.
[64] J.-H. Tsai and T.-W. Huang, “A 38–46 GHz MMIC Doherty power amplifier using post-distortion linearization,” IEEE Microw. Wireless Compon. Lett., vol. 17, no. 5, pp. 388–390, May 2007.
[65] J. Curtis et al., “A Ka-band Doherty power amplifier with 25.1 dBm output power, 38% peak PAE and 27% back-off PAE,” IEEE RFIC Symposium, pp. 349–352, June 2013.
[66] S.-C. Jung, O. Hammi, and F. M. Ghannouchi, “Design optimization and DPD linearization of GaN based unsymmetrical Doherty power amplifiers for 3G multicarrier applications,” IEEE Trans. Microw. Theory Techn., vol. 57, no. 9, pp. 2105–2113, Sep. 2009.
[67] A. Markos, K. Bathich, F. Golden, and G. Boeck, “A 50 W unsymmetrical GaN Doherty amplifier for LTE applications,” in Proc. 40th Eur. Microw. Conf., Sep. 2010, pp. 994–997
[68] T. Landon et al., "Design of a 600W Doherty using generation 2 HVHBT with 55% WCDMA efficiency linearized to −55dBc for 2c11 6.5dB PAR," Power Amplifiers for Wireless and Radio Applications (PAWR), 2012 IEEE Topical Conference, Santa Clara, CA, 2012, pp. 73–76. |