參考文獻 |
[1] Enerdata, World Energy & Climate Statistics - Yearbook 2022, 2022. Available: https://yearbook.enerdata.net/total-energy/world-consumption-statistics.html
[2] H.R.a.M. Roser, "Energy Production and Consumption", 2022.
[3] REN21, Renewables 2021 Global Status Report, 2021. Available: https://www.ren21.net/wp-content/uploads/2019/05/GSR2021_Full_Report.pdf
[4] S. Kim, H. Lee, N. Kim et al., "A thin film thermoelectric cooler for Chip-on-Board assembly", ieice electronics express, Vol, 7, pp. 1615-1621, 2010.
[5] W. Zhu, Y. Deng, M. Gao et al., "Hierarchical Bi–Te based flexible thin-film solar thermoelectric generator with light sensing feature", Energy Conversion and Management, Vol, 106, pp. 1192-1200, 2015.
[6] S. Saini, P. Mele, K. Miyazaki et al., "On-chip thermoelectric module comprised of oxide thin film legs", Energy Conversion and Management, Vol, 114, pp. 251-257, 2016.
[7] Y. Su, J. Lu, D. Villaroman et al., "Free-standing planar thermoelectric microrefrigerators based on nano-grained SiGe thin films for on-chip refrigeration", Nano Energy, Vol, 48, pp. 202-210, 2018.
[8] A. Nozariasbmarz, R.A. Kishore, B. Poudel et al., "High power density body heat energy harvesting", ACS applied materials & interfaces, Vol, 11, pp. 40107-40113, 2019.
[9] X.-L. Shi, J. Zou, and Z.-G. Chen, "Advanced thermoelectric design: from materials and structures to devices", Chemical Reviews, Vol, 120, pp. 7399-7515, 2020.
[10] M. Li, M. Hong, M. Dargusch et al., "High-efficiency thermocells driven by thermo-electrochemical processes", Trends in Chemistry, Vol, 3, pp. 561-574, 2021.
[11] D. Champier, "Thermoelectric generators: A review of applications", Energy Conversion and Management, Vol, 140, pp. 167-181, 2017.
[12] N. Jaziri, A. Boughamoura, J. Muller et al., "A comprehensive review of Thermoelectric Generators: Technologies and common applications", Energy Reports, Vol, 6, pp. 264-287, 2020.
[13] M.A. Zoui, S. Bentouba, J.G. Stocholm et al., "A Review on Thermoelectric Generators: Progress and Applications", Energies, Vol, 13, 2020.
[14] B.J. Huang, C.J. Chin, and C.L. Duang, "A design method of thermoelectric cooler", International Journal of Refrigeration-Revue Internationale Du Froid, Vol, 23, pp. 208-218, 2000.
[15] R.G. Yang, G. Chen, A.R. Kumar et al., "Transient cooling of thermoelectric coolers and its applications for microdevices", Energy Conversion and Management, Vol, 46, pp. 1407-1421, 2005.
[16] I. Chowdhury, R. Prasher, K. Lofgreen et al., "On-chip cooling by superlattice-based thin-film thermoelectrics", Nat. Nanotechnol., Vol, 4, pp. 235-238, 2009.
[17] D. Enescu, "Thermoelectric energy harvesting: basic principles and applications", Green energy advances, p. 1, 2019.
[18] C. Kim, S. Park, J. Yoon et al., "Effect of Thermoelectric Leg Thickness in a Planar Thin Film TEC Device on Different Substrates", Electronic Materials Letters, Vol, 15, pp. 686-692, 2019.
[19] S.M. Pourkiaei, M.H. Ahmadi, M. Sadeghzadeh et al., "Thermoelectric cooler and thermoelectric generator devices: A review of present and potential applications, modeling and materials", Energy, Vol, 186, 2019.
[20] H. Liu, H. Fu, L. Sun et al., "Hybrid energy harvesting technology: From materials, structural design, system integration to applications", Renewable and sustainable energy reviews, Vol, 137, p. 110473, 2021.
[21] S. Corbett, D. Gautam, S. Lal et al., "Electrodeposited Thin-Film Micro-Thermoelectric Coolers with Extreme Heat Flux Handling and Microsecond Time Response", Acs Applied Materials & Interfaces, Vol, 13, pp. 1773-1782, 2021.
[22] S.D. Xu, X.L. Shi, M. Dargusch et al., "Conducting polymer-based flexible thermoelectric materials and devices: From mechanisms to applications", Progress in Materials Science, Vol, 121, 2021.
[23] W.Y. Chen, X.L. Shi, J. Zou et al., "Thermoelectric Coolers: Progress, Challenges, and Opportunities", Small Methods, Vol, 6, 2022.
[24] T. Kajikawa, "Thermoelectric application for power generation in Japan", Advances in Science and Technology, Vol, 74, pp. 83-92, 2011.
[25] H.-B. Lee, H.J. Yang, J.H. We et al., "Thin-film thermoelectric module for power generator applications using a screen-printing method", Journal of electronic materials, Vol, 40, pp. 615-619, 2011.
[26] T. Sun, J.L. Peavey, M.D. Shelby et al., "Heat shrink formation of a corrugated thin film thermoelectric generator", Energy Conversion and Management, Vol, 103, pp. 674-680, 2015.
[27] S.H. Lee, H. Shen, and S. Han, "Flexible thermoelectric module using Bi-Te and Sb-Te thin films for temperature sensors", Journal of Electronic Materials, Vol, 48, pp. 5464-5470, 2019.
[28] P.-S. Lin, S. Inagaki, J.-H. Liu et al., "The Role of Branched Alkylthio Side Chain on Dispersion and Thermoelectric Properties of Regioregular Polythiophene/Carbon Nanotubes Nanocomposites", Chemical Engineering Journal, p. 141366, 2023.
[29] A. Sanchez-Torres, "Radioisotope power systems for space applications", Radioisotopes Application in Physical Sciences, Vol, 1, pp. 457-471, 2011.
[30] A. Sakai, T. Kanno, K. Takahashi et al., "Power generation and peltier refrigeration by a tubular π-type thermoelectric module", Journal of Electronic Materials, Vol, 44, pp. 4510-4515, 2015.
[31] D. Ji, H. Cai, Z. Ye et al., "Comparison between thermoelectric generator and organic Rankine cycle for low to medium temperature heat source: A Techno-economic analysis", Sustainable Energy Technologies and Assessments, Vol, 55, p. 102914, 2023.
[32] V. Karthikeyan, J.U. Surjadi, J.C. Wong et al., "Wearable and flexible thin film thermoelectric module for multi-scale energy harvesting", Journal of Power Sources, Vol, 455, p. 227983, 2020.
[33] D. Enescu and E.O. Virjoghe, "A review on thermoelectric cooling parameters and performance", Renewable and Sustainable Energy Reviews, Vol, 38, pp. 903-916, 2014.
[34] W.-Y. Chen, X.-L. Shi, J. Zou et al., "Thermoelectric coolers for on-chip thermal management: Materials, design, and optimization", Materials Science and Engineering: R: Reports, Vol, 151, p. 100700, 2022.
[35] Y.-C. Soong, J.-W. Li, Y.-F. Chen et al., "Polymer-assisted dispersion of boron nitride/graphene in a thermoplastic polyurethane hybrid for cooled smart clothes", ACS omega, Vol, 6, pp. 28779-28787, 2021.
[36] B. Hu, X.-L. Shi, J. Zou et al., "Thermoelectrics for medical applications: Progress, challenges, and perspectives", Chemical engineering journal, p. 135268, 2022.
[37] L. Liu, Y. Sun, W. Li et al., "Flexible unipolar thermoelectric devices based on patterned poly [K x (Ni-ethylenetetrathiolate)] thin films", Materials Chemistry Frontiers, Vol, 1, pp. 2111-2116, 2017.
[38] C.-W. Chen and C.-N. Liao, "Enhanced thermoelectric properties of screen-printed Bi–Sb–Te films on flexible substrate by electrical sintering process", Materials Chemistry and Physics, Vol, 259, p. 124006, 2021.
[39] G.J. Snyder and E.S. Toberer, "Complex thermoelectric materials", Nature materials, Vol, 7, pp. 105-114, 2008.
[40] A.D. LaLonde, Y. Pei, H. Wang et al., "Lead telluride alloy thermoelectrics", Materials today, Vol, 14, pp. 526-532, 2011.
[41] H. Fang, Z. Luo, H. Yang et al., "The effects of the size and the doping concentration on the power factor of n-type lead telluride nanocrystals for thermoelectric energy conversion", Nano letters, Vol, 14, pp. 1153-1157, 2014.
[42] T. Dankwort, A.L. Hansen, M. Winkler et al., "Nanostructure, thermoelectric properties, and transport theory of V2VI3 and V2VI3/IV–VI based superlattices and nanomaterials", physica status solidi (a), Vol, 213, pp. 662-671, 2016.
[43] M. Goto, M. Sasaki, Y. Xu et al., "Control of p-type and n-type thermoelectric properties of bismuth telluride thin films by combinatorial sputter coating technology", Applied Surface Science, Vol, 407, pp. 405-411, 2017.
[44] J. Qiao, Y. Zhao, Q. Jin et al., "Tailoring nanoporous structures in Bi2Te3 thin films for improved thermoelectric performance", ACS applied materials & interfaces, Vol, 11, pp. 38075-38083, 2019.
[45] D. Song, W. Liu, T. Zeng et al., "Thermal conductivity of skutterudite thin films and superlattices", Applied Physics Letters, Vol, 77, pp. 3854-3856, 2000.
[46] D.-H. Kim, E. Byon, G.-H. Lee et al., "Effect of deposition temperature on the structural and thermoelectric properties of bismuth telluride thin films grown by co-sputtering", Thin Solid Films, Vol, 510, pp. 148-153, 2006.
[47] Z. Zeng, P. Yang, and Z. Hu, "Temperature and size effects on electrical properties and thermoelectric power of Bismuth Telluride thin films deposited by co-sputtering", Applied Surface Science, Vol, 268, pp. 472-476, 2013.
[48] P.H. Le, C.-N. Liao, C.W. Luo et al., "Thermoelectric properties of nanostructured bismuth–telluride thin films grown using pulsed laser deposition", Journal of alloys and compounds, Vol, 615, pp. 546-552, 2014.
[49] S.-J. Joo, B.S. Kim, B.-K. Min et al., "Deposition of n-type Bi2Te3 thin films on polyimide by using RF magnetron co-sputtering method", Journal of Nanoscience and Nanotechnology, Vol, 15, pp. 8299-8304, 2015.
[50] M. Daniel, M. Lindorf, and M. Albrecht, "Thermoelectric properties of skutterudite CoSb3 thin films", Journal of Applied Physics, Vol, 120, p. 125306, 2016.
[51] P. Nuthongkum, R. Sakdanuphab, M. Horprathum et al., "[Bi]:[Te] Control, Structural and Thermoelectric Properties of Flexible Bi x Te y Thin Films Prepared by RF Magnetron Sputtering at Different Sputtering Pressures", Journal of Electronic Materials, Vol, 46, pp. 6444-6450, 2017.
[52] D.-D. Yang, H. Tong, L.-J. Zhou et al., "Effects of thickness and temperature on thermoelectric properties of Bi2Te3-based thin films", Chinese Physics Letters, Vol, 34, p. 127301, 2017.
[53] C.W. Lee, G.H. Kim, J.W. Choi et al., "Improvement of thermoelectric properties of Bi2Te3 and Sb2Te3 films grown on graphene substrate", physica status solidi (RRL)–Rapid Research Letters, Vol, 11, p. 1700029, 2017.
[54] P.-Y. Chuang, S.-H. Su, C.-W. Chong et al., "Anti-site defect effect on the electronic structure of a Bi 2 Te 3 topological insulator", RSC advances, Vol, 8, pp. 423-428, 2018.
[55] H.-J. Wu and W.-T. Yen, "High thermoelectric performance in Cu-doped Bi2Te3 with carrier-type transition", Acta Materialia, Vol, 157, pp. 33-41, 2018.
[56] Y.-J. Wu, S.-C. Hsu, Y.-C. Lin et al., "Study on thermoelectric property optimization of mixed-phase bismuth telluride thin films deposited by co-evaporation process", Surface and Coatings Technology, Vol, 394, p. 125694, 2020.
[57] K.B. Masood, P. Kumar, R. Singh et al., "Odyssey of thermoelectric materials: foundation of the complex structure", Journal of Physics Communications, Vol, 2, p. 062001, 2018.
[58] S.J. Kim, J.H. We, and B.J. Cho, "A wearable thermoelectric generator fabricated on a glass fabric", Energy & Environmental Science, Vol, 7, pp. 1959-1965, 2014.
[59] D. Lee, C. Lim, D. Cho et al., "Effects of annealing on the thermoelectric and microstructural properties of deformed n-type Bi 2 Te 3-based compounds", Journal of electronic materials, Vol, 35, pp. 360-365, 2006.
[60] S. Li, H.M. Soliman, J. Zhou et al., "Effects of annealing and doping on nanostructured bismuth telluride thick films", Chemistry of Materials, Vol, 20, pp. 4403-4410, 2008.
[61] A. Taylor, C. Mortensen, R. Rostek et al., "Vapor annealing as a post-processing technique to control carrier concentrations of Bi 2 Te 3 thin films", Journal of electronic materials, Vol, 39, pp. 1981-1986, 2010.
[62] S.-j. Jeon, M. Oh, H. Jeon et al., "Effects of post-annealing on thermoelectric properties of bismuth–tellurium thin films deposited by co-sputtering", Microelectronic engineering, Vol, 88, pp. 541-544, 2011.
[63] S.-R. Jian, P.H. Le, C.-W. Luo et al., "Nanomechanical and wettability properties of Bi2Te3 thin films: Effects of post-annealing", Journal of Applied Physics, Vol, 121, p. 175302, 2017.
[64] J.-M. Lin, Y.-C. Chen, and C.-P. Lin, "Annealing effect on the thermoelectric properties of Bi2Te3 thin films prepared by thermal evaporation method", Journal of nanomaterials, Vol, 2013, pp. 1-1, 2013.
[65] X. Wang, H. He, N. Wang et al., "Effects of annealing temperature on thermoelectric properties of Bi2Te3 films prepared by co-sputtering", Applied Surface Science, Vol, 276, pp. 539-542, 2013.
[66] L. Hu, H. Wu, T. Zhu et al., "Tuning multiscale microstructures to enhance thermoelectric performance of n‐type Bismuth‐Telluride‐based solid solutions", Advanced Energy Materials, Vol, 5, p. 1500411, 2015.
[67] M.-K. Han, K. Ahn, H. Kim et al., "Formation of Cu nanoparticles in layered Bi 2 Te 3 and their effect on ZT enhancement", Journal of Materials Chemistry, Vol, 21, pp. 11365-11370, 2011.
[68] W.S. Liu, Q. Zhang, Y. Lan et al., "Thermoelectric property studies on Cu‐doped n‐type CuxBi2Te2. 7Se0. 3 nanocomposites", Advanced Energy Materials, Vol, 1, pp. 577-587, 2011.
[69] F. Hao, P. Qiu, Y. Tang et al., "High efficiency Bi 2 Te 3-based materials and devices for thermoelectric power generation between 100 and 300 C", Energy & Environmental Science, Vol, 9, pp. 3120-3127, 2016.
[70] F. Sie, C. Kuo, C.-S. Hwang et al., "Thermoelectric performance of n-Type Bi 2 Te 3/Cu composites fabricated by nanoparticle decoration and spark plasma sintering", Journal of Electronic Materials, Vol, 45, pp. 1927-1934, 2016.
[71] H.-S. Kim, K.H. Lee, J. Yoo et al., "Suppression of bipolar conduction via bandgap engineering for enhanced thermoelectric performance of p-type Bi0. 4Sb1. 6Te3 alloys", Journal of Alloys and Compounds, Vol, 741, pp. 869-874, 2018.
[72] K. Kim, G. Kim, S.I. Kim et al., "Clarification of electronic and thermal transport properties of Pb-, Ag-, and Cu-doped p-type Bi0. 52Sb1. 48Te3", Journal of Alloys and Compounds, Vol, 772, pp. 593-602, 2019.
[73] J. Cha, C. Zhou, S.-P. Cho et al., "Ultrahigh power factor and electron mobility in n-type Bi2Te3–x% Cu stabilized under excess Te condition", ACS applied materials & interfaces, Vol, 11, pp. 30999-31008, 2019.
[74] R. Carlson, "Anisotropic diffusion of copper into bismuth telluride", Journal of Physics and Chemistry of Solids, Vol, 13, pp. 65-70, 1960.
[75] S. Diliberto, V. Richoux, N. Stein et al., "Influence of pulsed electrodeposition on stoichiometry and thermoelectric properties of bismuth telluride films", physica status solidi (a), Vol, 205, pp. 2340-2344, 2008.
[76] W.-C. Lin, Y.-S. Li, and A.T. Wu, "Study of diffusion barrier for solder/n-type Bi 2 Te 3 and bonding strength for p-and n-type thermoelectric modules", Journal of Electronic Materials, Vol, 47, pp. 148-154, 2018.
[77] C.-H. Wang, H.-C. Hsieh, Z.-W. Sun et al., "Interfacial stability in Bi2Te3 thermoelectric joints", ACS Applied Materials & Interfaces, Vol, 12, pp. 27001-27009, 2020.
[78] H.-C. Hsieh, C.-H. Wang, T.-W. Lan et al., "Joint properties enhancement for PbTe thermoelectric materials by addition of diffusion barrier", Materials Chemistry and Physics, Vol, 246, p. 122848, 2020.
[79] Y. He, T. Zhang, X. Shi et al., "High thermoelectric performance in copper telluride", NPG Asia Materials, Vol, 7, pp. e210-e210, 2015.
[80] L. Yu, K. Luo, S. Chen et al., "Cu-deficiency induced structural transition of Cu 2− x Te", CrystEngComm, Vol, 17, pp. 2878-2885, 2015.
[81] J. Salmón-Gamboa, A. Barajas-Aguilar, L. Ruiz-Ortega et al., "Vibrational and electrical properties of Cu2− xTe films: experimental data and first principle calculations", Scientific Reports, Vol, 8, p. 8093, 2018.
[82] S. Mukherjee, R. Chetty, P.P. Madduri et al., "Investigation on the structure and thermoelectric properties of Cu x Te binary compounds", Dalton Transactions, Vol, 48, pp. 1040-1050, 2019.
[83] B.G. Kim, S.H. Bae, J. Byeon et al., "Stress-induced change of Cu-doped Bi2Te3 thin films for flexible thermoelectric applications", Materials Letters, Vol, 270, p. 127697, 2020.
[84] N.-H. Bae, S. Han, K.E. Lee et al., "Diffusion at interfaces of micro thermoelectric devices", Current Applied Physics, Vol, 11, pp. S40-S44, 2011.
[85] H.-H. Hsu, C.-H. Cheng, Y.-L. Lin et al., "Structural stability of thermoelectric diffusion barriers: Experimental results and first principles calculations", Applied Physics Letters, Vol, 103, p. 053902, 2013.
[86] L. Anatychuk and O. Luste, "Physical principles of microminiaturization in thermoelectricity," Fifteenth International Conference on Thermoelectrics. Proceedings ICT′96 pp. 279-287, 1996.
[87] C.-N. Liao, C.-H. Lee, and W.-J. Chen, "Effect of interfacial compound formation on contact resistivity of soldered junctions between bismuth telluride-based thermoelements and copper", Electrochemical and solid-state letters, Vol, 10, p. P23, 2007.
[88] R. Janoch, A.M. Gabor, A. Anselmo et al., "Contact resistance measurement-observations on technique and test parameters," 2015 IEEE 42nd Photovoltaic Specialist Conference (PVSC) pp. 1-6, 2015.
[89] X. Kong, W. Zhu, L. Cao et al., "Controllable electrical contact resistance between Cu and oriented-Bi2Te3 film via interface tuning", ACS applied materials & interfaces, Vol, 9, pp. 25606-25614, 2017.
[90] X. Zhu, L. Cao, W. Zhu et al., "Enhanced interfacial adhesion and thermal stability in bismuth telluride/nickel/copper multilayer films with low electrical contact resistance", Advanced Materials Interfaces, Vol, 5, p. 1801279, 2018.
[91] M.-W. Jeong, S.-Y. Lee, H.-B. Park et al., "Stable interconnect system for horizontal thermoelectric coolers by thermodynamic-based prediction", Electronic Materials Letters, Vol, 15, pp. 654-662, 2019.
[92] H. Noro, K. Sato, and H. Kagechika, "The thermoelectric properties and crystallography of Bi‐Sb‐Te‐Se thin films grown by ion beam sputtering", Journal of Applied Physics, Vol, 73, pp. 1252-1260, 1993.
[93] G. Boisvert, N. Mousseau, and L.J. Lewis, "Surface diffusion coefficients by thermodynamic integration: Cu on Cu(100)", Physical Review B, Vol, 58, pp. 12667-12670, 1998.
[94] M.-C. Marinica, C. Barreteau, M.-C. Desjonquères et al., "Influence of short-range adatom-adatom interactions on the surface diffusion of Cu on Cu (111)", Physical Review B, Vol, 70, p. 075415, 2004.
[95] L. Wang, Z. Cao, K. Hu et al., "Effects of electric field annealing on the interface diffusion of Cu/Ta/Si stacks", Applied surface science, Vol, 257, pp. 10845-10849, 2011.
[96] H. Li, R. Brescia, M. Povia et al., "Synthesis of uniform disk-shaped copper telluride nanocrystals and cation exchange to cadmium telluride quantum disks with stable red emission", Journal of the American Chemical Society, Vol, 135, pp. 12270-12278, 2013.
[97] A.C. Poulose, S. Veeranarayanan, M.S. Mohamed et al., "Multifunctional Cu2− xTe nanocubes mediated combination therapy for multi-drug resistant MDA MB 453", Scientific reports, Vol, 6, p. 35961, 2016.
[98] M. Ahmad, K. Agarwal, and B. Mehta, "An anomalously high Seebeck coefficient and power factor in ultrathin Bi2Te3 film: Spin–orbit interaction", Journal of Applied Physics, Vol, 128, 2020.
[99] D.J. Lee, G. Mohan Kumar, V. Ganesh et al., "Novel Nanoarchitectured Cu2Te as a Photocathodes for Photoelectrochemical Water Splitting Applications", Nanomaterials, Vol, 12, p. 3192, 2022.
[100] L.M. Pavlova, Y.I. Shtern, and R.E.e. Mironov, "Thermal expansion of bismuth telluride", High Temperature, Vol, 49, pp. 369-379, 2011.
[101] B. Zhang, X. Li, and D. Li, "Assessment of thermal expansion coefficient for pure metals", Calphad, Vol, 43, pp. 7-17, 2013.
[102] Y. Lan, D. Wang, G. Chen et al., "Diffusion of nickel and tin in p-type (Bi, Sb) 2 Te 3 and n-type Bi 2 (Te, Se) 3 thermoelectric materials", Applied Physics Letters, Vol, 92, p. 101910, 2008.
[103] C.-P. Lin and C.-M. Chen, "The cross-interactions in the Ni/Sn/Cu diffusion couples with an electroless palladium surface finish", Journal of alloys and compounds, Vol, 547, pp. 37-42, 2013.
[104] S. Fujimoto, S. Sano, and T. Kajitani, "Analysis of diffusion mechanism of Cu in polycrystalline Bi2Te3-based alloy with the aging of electrical conductivity", Japanese Journal of Applied Physics, Vol, 46, p. 5033, 2007.
[105] X.-G. Zhu, J. Wen, G. Wang et al., "Doping nature of Cu in epitaxial topological insulator Bi2Te3 thin films", Surface science, Vol, 617, pp. 156-161, 2013.
[106] T. Lin, C. Liao, and A.T. Wu, "Evaluation of diffusion barrier between lead-free solder systems and thermoelectric materials", Journal of electronic materials, Vol, 41, pp. 153-158, 2012.
[107] M. Rizzo Piton, T. Hakkarainen, J. Hilska et al., "Optimization of Ohmic Contacts to p-GaAs Nanowires", Nanoscale Research Letters, Vol, 14, pp. 1-7, 2019.
[108] W. Liu, H. Wang, L. Wang et al., "Understanding of the contact of nanostructured thermoelectric n-type Bi 2 Te 2.7 Se 0.3 legs for power generation applications", Journal of Materials Chemistry A, Vol, 1, pp. 13093-13100, 2013.
[109] Z.-W. Sun, K.-W. Cheng, S.-W. Lin et al., "Stoichiometric Effect of Sb2Te3 Thin Film on Thermoelectric Property", ACS Applied Energy Materials, 2022.
[110] H. Zou, D.M. Rowe, and G. Min, "Growth of p-and n-type bismuth telluride thin films by co-evaporation", Journal of crystal growth, Vol, 222, pp. 82-87, 2001.
[111] Z.-h. Zheng, P. Fan, G.-x. Liang et al., "Annealing temperature influence on electrical properties of ion beam sputtered Bi2Te3 thin films", Journal of Physics and Chemistry of Solids, Vol, 71, pp. 1713-1716, 2010.
[112] J.H. We, S.J. Kim, G.S. Kim et al., "Improvement of thermoelectric properties of screen-printed Bi2Te3 thick film by optimization of the annealing process", Journal of Alloys and Compounds, Vol, 552, pp. 107-110, 2013.
[113] K.H. Seo, B.G. Kim, C.-H. Lim et al., "Doping amount dependence of phase formation and microstructure evolution in heavily Cu-doped Bi 2 Te 3 films for thermoelectric applications", CrystEngComm, Vol, 19, pp. 2750-2757, 2017.
[114] M. Zhang, W. Liu, C. Zhang et al., "Identifying the manipulation of individual atomic-scale defects for boosting thermoelectric performances in artificially controlled Bi2Te3 films", ACS nano, Vol, 15, pp. 5706-5714, 2021. |