中大機構典藏-NCU Institutional Repository-提供博碩士論文、考古題、期刊論文、研究計畫等下載:Item 987654321/43754
English  |  正體中文  |  简体中文  |  全文筆數/總筆數 : 80990/80990 (100%)
造訪人次 : 41655858      線上人數 : 2293
RC Version 7.0 © Powered By DSPACE, MIT. Enhanced by NTU Library IR team.
搜尋範圍 查詢小技巧:
  • 您可在西文檢索詞彙前後加上"雙引號",以獲取較精準的檢索結果
  • 若欲以作者姓名搜尋,建議至進階搜尋限定作者欄位,可獲得較完整資料
  • 進階搜尋


    請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/43754


    題名: 新式細胞培養法:三維明膠鷹架;Culturing Cells in Cellular Solids
    作者: 林靜英;Jing-ying Lin
    貢獻者: 生物物理研究所
    關鍵詞: 細胞形態;細胞培養;三維明膠鷹架;微流體裝置;microfluidic device;cell morphology;cell culture;gelatin scaffold
    日期: 2010-07-06
    上傳時間: 2010-12-08 14:18:19 (UTC+8)
    出版者: 國立中央大學
    摘要: 近年來,科學家在「培養於三維環境的細胞行為表現」方面的研究有快速成長的趨勢。就我們所知,人體內的細胞本生長在由細胞外間質構築而成的三維空間裡,而那些人工製造的三維細胞培養支架,即稱之為「鷹架」。 用來產生鷹架的方式有許多,可利用天然的含水凝膠材質(細胞外間質的衍生物)或是鑄模後的孔洞結構來生產,但這些鷹架內的結構組成通常是很不一致。至今,對於何種三維環境是最適合細胞生長的概念也尚未定論。所以在這篇研究中,我們建造了一新式的三維明膠鷹架,它內部的孔洞結構大小一致且排列整齊。方法上我們使用了簡易的微流體裝置,在足夠的氣體流速下製造100μm大小的泡泡。當這些液體泡泡自我排列成結晶狀後,再藉由溫度的變化與化學交聯劑,進行膠化使其成為固體泡沫,以持久性地維持它們的架構。最後以真空打破孔洞間的交界面,即完成內部孔徑大小均一且相通的三維明膠鷹架。另一方面,我們也著手於鷹架內培養細胞,嘗試了三種細胞類型:纖維母細胞,肌母細胞和上皮細胞。不同種類的細胞在鷹架內表現出明顯的形態差異。我們相信這個新式鷹架將能成為一個探討在不同孔徑下細胞行為表現的平台,並有助於針對細胞形態進行更多量化的影像分析。 In recent years, there is a rapid increase of studies about cell behaviors in three-dimensional (3D) environment. Cells in our bodies are surrounded by 3D environment which is mainly composed of extracellular matrix (ECM). An artificial 3D cell culture support in 3D is often called a scaffold. Various approaches are shown to construct scaffolds such as a natural hydrogel matrix (ECM derivatives) or a precast porous structure whose architecture is often non-homogeneous. There is no consensus on what kind of 3D environment is most suited for cell growth and behaviors. In this thesis, we constructed a gelatin scaffold with a well-defined pore size and crystalline architecture. We used a simple flow-focusing microfluidic device to generate bubbles about 100μm in diameter and high enough air fraction rate. The bubbles self-assembled into crystalline face and we fixed the structure by changing the temperature. The congealed solid foam was further permanently crosslinked by chemical crosslinkers and the facet between pores were ruptured by vacuum. The final scaffold was a monodisperse solid foam with open cells. Furthermore, we cultured fibroblasts, epithelial cells and myoblasts in our 3D scaffolds. Different cells showed distinct morphologies in the scaffolds. We believed that this scaffold could provide a platform to study cell behaviors at different pore sizes and allow more quantitative image analysis for cell morphology.
    顯示於類別:[生物物理研究所 ] 博碩士論文

    文件中的檔案:

    檔案 描述 大小格式瀏覽次數
    index.html0KbHTML1151檢視/開啟


    在NCUIR中所有的資料項目都受到原著作權保護.

    社群 sharing

    ::: Copyright National Central University. | 國立中央大學圖書館版權所有 | 收藏本站 | 設為首頁 | 最佳瀏覽畫面: 1024*768 | 建站日期:8-24-2009 :::
    DSpace Software Copyright © 2002-2004  MIT &  Hewlett-Packard  /   Enhanced by   NTU Library IR team Copyright ©   - 隱私權政策聲明