Combination of a Nd:YAG laser and a liquid cooling device to (Zr(53)Cu(30)Ni(9)Al(8))Si(0.5) bulk metallic glass welding

NCUIR > Engineering College > Departmant of Mechanical Engineering > journal & Dissertation > Item 987654321/50050

Please use this identifier to cite or link to this item: http://ir.lib.ncu.edu.tw/handle/987654321/50050

Title:	Combination of a Nd:YAG laser and a liquid cooling device to (Zr(53)Cu(30)Ni(9)Al(8))Si(0.5) bulk metallic glass welding
Authors:	Wang,HS;Chen,HG;Jang,JSC;Chiou,MS
Contributors:	機械工程學系
Keywords:	ALLOY;EVOLUTION;MICROSTRUCTURE;PHASE
Date:	2010
Issue Date:	2012-03-27 17:02:11 (UTC+8)
Publisher:	國立中央大學
Abstract:	Using pre-selected welding parameters, a crystallization-free weld for (Zr(53)Cu(30)Ni(9)Al(8))Si(0.5) bulk metallic glass (BMG) was successfully produced by adopting a Nd:YAG pulse laser in combination with a liquid cooling device (LCD). When a LCD was employed, a faster cooling rate and shorter retention time for the crystallization temperature interval were produced, thus, no crystallization was observed in the weld fusion zone (WFZ) or heat affected zone (HAZ). The hardness in those areas did not differ significantly in comparison to the parent material (PM). For the room temperature laser weld (LCD was not employed), HAZ crystallization seemed unavoidable, although no crystallization occurred within the WFZ. The major crystalline phase in the HAZ was identified as Zr(2)Cu. When the precipitates were greater in the crystallized area (i.e., HAZ), cracks were more likely to form, thus, hardness in the area was decreased. (C) 2010 Elsevier B.V. All rights reserved.
Relation:	MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
Appears in Collections:	[Departmant of Mechanical Engineering ] journal & Dissertation

Files in This Item:

File	Description	Size	Format
index.html		0Kb	HTML	354	View/Open

社群 sharing