Combination of a Nd:YAG laser and a liquid cooling device to (Zr(53)Cu(30)Ni(9)Al(8))Si(0.5) bulk metallic glass welding

NCU Institutional Repository > 工學院 > 機械工程學系 > 期刊論文 > Item 987654321/50050

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/50050

题名:	Combination of a Nd:YAG laser and a liquid cooling device to (Zr(53)Cu(30)Ni(9)Al(8))Si(0.5) bulk metallic glass welding
作者:	Wang,HS;Chen,HG;Jang,JSC;Chiou,MS
贡献者:	機械工程學系
关键词:	ALLOY;EVOLUTION;MICROSTRUCTURE;PHASE
日期:	2010
上传时间:	2012-03-27 17:02:11 (UTC+8)
出版者:	國立中央大學
摘要:	Using pre-selected welding parameters, a crystallization-free weld for (Zr(53)Cu(30)Ni(9)Al(8))Si(0.5) bulk metallic glass (BMG) was successfully produced by adopting a Nd:YAG pulse laser in combination with a liquid cooling device (LCD). When a LCD was employed, a faster cooling rate and shorter retention time for the crystallization temperature interval were produced, thus, no crystallization was observed in the weld fusion zone (WFZ) or heat affected zone (HAZ). The hardness in those areas did not differ significantly in comparison to the parent material (PM). For the room temperature laser weld (LCD was not employed), HAZ crystallization seemed unavoidable, although no crystallization occurred within the WFZ. The major crystalline phase in the HAZ was identified as Zr(2)Cu. When the precipitates were greater in the crystallized area (i.e., HAZ), cracks were more likely to form, thus, hardness in the area was decreased. (C) 2010 Elsevier B.V. All rights reserved.
關聯:	MATERIALS SCIENCE AND ENGINEERING A-STRUCTURAL MATERIALS PROPERTIES MICROSTRUCTURE AND PROCESSING
显示于类别:	[機械工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	354	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing