Analysis and Design of Single-to-Balanced Combline Bandpass Filters With Two Independently Controllable Transmission Zeros in LTCC Technology

NCU Institutional Repository > 資訊電機學院 > 電機工程學系 > 期刊論文 > Item 987654321/51912

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/51912

题名:	Analysis and Design of Single-to-Balanced Combline Bandpass Filters With Two Independently Controllable Transmission Zeros in LTCC Technology
作者:	Tsai,CL;Lin,YS
贡献者:	電機工程學系
关键词:	COFIRED CERAMIC TECHNOLOGY;NETWORKS;DIPLEXER;BALUNS;LINES
日期:	2010
上传时间:	2012-03-28 10:10:15 (UTC+8)
出版者:	國立中央大學
摘要:	In this paper, the analysis and design of single-to-balanced combline bandpass filter are presented. The cross-coupled effect is introduced to create two transmission zeros that can be located independently in either the upper or lower stopband. Notably, the effect of nonadjacent line coupling on the filter response is properly addressed, and an efficient way to compensate it is proposed. Also, the issue of a frequency-dependent J-inverter in bandpass filter design is also well treated. The proposed filter can be implemented using the low-temperature co-fired ceramic (LTCC) process to achieve very compact circuit size, in which the combline line lengths are as small as lambda/15. Specifically, two third-order single-to-balanced combline bandpass filters in LTCC are implemented. Good balance performance, low loss, good selectivity, and compact size are achieved.
關聯:	IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES
显示于类别:	[電機工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	365	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing