Analysis and Design of Single-to-Balanced Combline Bandpass Filters With Two Independently Controllable Transmission Zeros in LTCC Technology

NCU Institutional Repository > 資訊電機學院 > 電機工程學系 > 期刊論文 > Item 987654321/51912

請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/51912

題名:	Analysis and Design of Single-to-Balanced Combline Bandpass Filters With Two Independently Controllable Transmission Zeros in LTCC Technology
作者:	Tsai,CL;Lin,YS
貢獻者:	電機工程學系
關鍵詞:	COFIRED CERAMIC TECHNOLOGY;NETWORKS;DIPLEXER;BALUNS;LINES
日期:	2010
上傳時間:	2012-03-28 10:10:15 (UTC+8)
出版者:	國立中央大學
摘要:	In this paper, the analysis and design of single-to-balanced combline bandpass filter are presented. The cross-coupled effect is introduced to create two transmission zeros that can be located independently in either the upper or lower stopband. Notably, the effect of nonadjacent line coupling on the filter response is properly addressed, and an efficient way to compensate it is proposed. Also, the issue of a frequency-dependent J-inverter in bandpass filter design is also well treated. The proposed filter can be implemented using the low-temperature co-fired ceramic (LTCC) process to achieve very compact circuit size, in which the combline line lengths are as small as lambda/15. Specifically, two third-order single-to-balanced combline bandpass filters in LTCC are implemented. Good balance performance, low loss, good selectivity, and compact size are achieved.
關聯:	IEEE TRANSACTIONS ON MICROWAVE THEORY AND TECHNIQUES
顯示於類別:	[電機工程學系] 期刊論文

文件中的檔案:

檔案	描述	大小	格式	瀏覽次數
index.html		0Kb	HTML	367	檢視/開啟

在NCUIR中所有的資料項目都受到原著作權保護.

社群 sharing