Broadband microstrip bandpass filters using triple-mode resonator

NCU Institutional Repository > 資訊電機學院 > 電機工程學系 > 期刊論文 > Item 987654321/51919

jsp.display-item.identifier=請使用永久網址來引用或連結此文件: http://ir.lib.ncu.edu.tw/handle/987654321/51919

题名:	Broadband microstrip bandpass filters using triple-mode resonator
作者:	Tu,WH
贡献者:	電機工程學系
关键词:	STEPPED-IMPEDANCE RESONATORS;UPPER-STOPBAND;REJECTION
日期:	2010
上传时间:	2012-03-28 10:10:25 (UTC+8)
出版者:	國立中央大學
摘要:	A broadband microstrip bandpass filter using a stub-loaded resonator is proposed. The basic block of the proposed filter is a triple-mode resonator that consists of a half-wave resonator and a shunt open-circuited stub. A parameter study of how to control the frequencies of the three modes is presented. Two bandpass filters using the proposed resonator have been designed, fabricated and tested to validate the design concept. Design guidelines and a comparison with previous work are also included. For the first bandpass filter, from 1.75 to 3.25 GHz, the measured return loss is greater than 16 dB and the measured insertion loss is less than 0.9 dB. The maximum group delay variation is 0.6 ns. Furthermore, there are two transmission zeros at 1.3 and 3.8 GHz for a better cut-off response. For the second one, from 1.6 to 3.7 GHz, the measured return loss is greater than 14 dB and the measured insertion loss is less than 1 dB. The maximum group delay variation is 0.6 ns, and there are two transmission zeros at 1.36 and 4.03 GHz.
關聯:	IET MICROWAVES ANTENNAS & PROPAGATION
显示于类别:	[電機工程學系] 期刊論文

文件中的档案:

档案	描述	大小	格式	浏览次数
index.html		0Kb	HTML	262	检视/开启

在NCUIR中所有的数据项都受到原著作权保护.

社群 sharing